From: Vineet Gupta <Vineet.Gupta1-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
To: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: kbuild test robot <lkp-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
"kbuild-all-JC7UmRfGjtg@public.gmane.org"
<kbuild-all-JC7UmRfGjtg@public.gmane.org>,
Vineet Gupta
<Vineet.Gupta1-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>,
Grant Likely
<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arch-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v2] of/fdt: Allow memory node and root to have different size/address cells
Date: Thu, 1 Oct 2015 17:48:21 +0530 [thread overview]
Message-ID: <1443701901-362-1-git-send-email-vgupta@synopsys.com> (raw)
Currently memory node parsing uses root "#size-cells", "#address-cells"
This doesn't work correctly when memory address/size is different or
greater than root's.
e.g. ARC 32-bit systems implementing physical adressing extension and
say 4GB of memory. All peripherals mappings stay within the 4GB (so root
address/size cells remain 1 each), only the memory node address/size
cells needs to specify greater than 32-bits as below
memory {
device_type = "memory";
reg = <0x0 0x80000000 0x1 0x00000000>; /* 4 GB */
#address-cells = <2>;
#size-cells = <2>;
};
This patch lets me boot a ARC system with PAE40 + 4GB of memory specified
as above and fails to boot otherwise as memory parsing doesn't populate
right base, size.
---
Changes since v2:
silly typo creeped in due to last minute change to use root props
---
Cc: Grant Likely <grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-arch-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Signed-off-by: Vineet Gupta <vgupta-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
---
drivers/of/fdt.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 07496560e5b9..48618bb2674a 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -888,8 +888,8 @@ int __init early_init_dt_scan_memory(unsigned long node, const char *uname,
int depth, void *data)
{
const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
- const __be32 *reg, *endp;
- int l;
+ const __be32 *reg, *endp, *prop;
+ int l, dt_mem_addr_cells, dt_mem_size_cells;
/* We are scanning "memory" nodes only */
if (type == NULL) {
@@ -912,11 +912,22 @@ int __init early_init_dt_scan_memory(unsigned long node, const char *uname,
pr_debug("memory scan node %s, reg size %d,\n", uname, l);
- while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
+
+ dt_mem_size_cells = dt_root_size_cells;
+ prop = of_get_flat_dt_prop(node, "#size-cells", NULL);
+ if (prop)
+ dt_mem_size_cells = be32_to_cpup(prop);
+
+ dt_mem_addr_cells = dt_root_addr_cells;
+ prop = of_get_flat_dt_prop(node, "#address-cells", NULL);
+ if (prop)
+ dt_mem_addr_cells = be32_to_cpup(prop);
+
+ while ((endp - reg) >= (dt_mem_addr_cells + dt_mem_size_cells)) {
u64 base, size;
- base = dt_mem_next_cell(dt_root_addr_cells, ®);
- size = dt_mem_next_cell(dt_root_size_cells, ®);
+ base = dt_mem_next_cell(dt_mem_addr_cells, ®);
+ size = dt_mem_next_cell(dt_mem_size_cells, ®);
if (size == 0)
continue;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Vineet Gupta <Vineet.Gupta1@synopsys.com>
To: Rob Herring <robh+dt@kernel.org>
Cc: kbuild test robot <lkp@intel.com>,
"kbuild-all@01.org" <kbuild-all@01.org>,
Vineet Gupta <Vineet.Gupta1@synopsys.com>,
Grant Likely <grant.likely@linaro.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arch@vger.kernel.org
Subject: [PATCH v2] of/fdt: Allow memory node and root to have different size/address cells
Date: Thu, 1 Oct 2015 17:48:21 +0530 [thread overview]
Message-ID: <1443701901-362-1-git-send-email-vgupta@synopsys.com> (raw)
Message-ID: <20151001121821.jPfuIy6Pv4wbeCfclPVLCo9Eq_zZt_YqWX1qKhGNGB8@z> (raw)
Currently memory node parsing uses root "#size-cells", "#address-cells"
This doesn't work correctly when memory address/size is different or
greater than root's.
e.g. ARC 32-bit systems implementing physical adressing extension and
say 4GB of memory. All peripherals mappings stay within the 4GB (so root
address/size cells remain 1 each), only the memory node address/size
cells needs to specify greater than 32-bits as below
memory {
device_type = "memory";
reg = <0x0 0x80000000 0x1 0x00000000>; /* 4 GB */
#address-cells = <2>;
#size-cells = <2>;
};
This patch lets me boot a ARC system with PAE40 + 4GB of memory specified
as above and fails to boot otherwise as memory parsing doesn't populate
right base, size.
---
Changes since v2:
silly typo creeped in due to last minute change to use root props
---
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
---
drivers/of/fdt.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 07496560e5b9..48618bb2674a 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -888,8 +888,8 @@ int __init early_init_dt_scan_memory(unsigned long node, const char *uname,
int depth, void *data)
{
const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
- const __be32 *reg, *endp;
- int l;
+ const __be32 *reg, *endp, *prop;
+ int l, dt_mem_addr_cells, dt_mem_size_cells;
/* We are scanning "memory" nodes only */
if (type == NULL) {
@@ -912,11 +912,22 @@ int __init early_init_dt_scan_memory(unsigned long node, const char *uname,
pr_debug("memory scan node %s, reg size %d,\n", uname, l);
- while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
+
+ dt_mem_size_cells = dt_root_size_cells;
+ prop = of_get_flat_dt_prop(node, "#size-cells", NULL);
+ if (prop)
+ dt_mem_size_cells = be32_to_cpup(prop);
+
+ dt_mem_addr_cells = dt_root_addr_cells;
+ prop = of_get_flat_dt_prop(node, "#address-cells", NULL);
+ if (prop)
+ dt_mem_addr_cells = be32_to_cpup(prop);
+
+ while ((endp - reg) >= (dt_mem_addr_cells + dt_mem_size_cells)) {
u64 base, size;
- base = dt_mem_next_cell(dt_root_addr_cells, ®);
- size = dt_mem_next_cell(dt_root_size_cells, ®);
+ base = dt_mem_next_cell(dt_mem_addr_cells, ®);
+ size = dt_mem_next_cell(dt_mem_size_cells, ®);
if (size == 0)
continue;
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Vineet Gupta <Vineet.Gupta1@synopsys.com>
To: Rob Herring <robh+dt@kernel.org>
Cc: kbuild test robot <lkp@intel.com>,
"kbuild-all@01.org" <kbuild-all@01.org>,
Vineet Gupta <Vineet.Gupta1@synopsys.com>,
Grant Likely <grant.likely@linaro.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arch@vger.kernel.org>
Subject: [PATCH v2] of/fdt: Allow memory node and root to have different size/address cells
Date: Thu, 1 Oct 2015 17:48:21 +0530 [thread overview]
Message-ID: <1443701901-362-1-git-send-email-vgupta@synopsys.com> (raw)
Currently memory node parsing uses root "#size-cells", "#address-cells"
This doesn't work correctly when memory address/size is different or
greater than root's.
e.g. ARC 32-bit systems implementing physical adressing extension and
say 4GB of memory. All peripherals mappings stay within the 4GB (so root
address/size cells remain 1 each), only the memory node address/size
cells needs to specify greater than 32-bits as below
memory {
device_type = "memory";
reg = <0x0 0x80000000 0x1 0x00000000>; /* 4 GB */
#address-cells = <2>;
#size-cells = <2>;
};
This patch lets me boot a ARC system with PAE40 + 4GB of memory specified
as above and fails to boot otherwise as memory parsing doesn't populate
right base, size.
---
Changes since v2:
silly typo creeped in due to last minute change to use root props
---
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
---
drivers/of/fdt.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 07496560e5b9..48618bb2674a 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -888,8 +888,8 @@ int __init early_init_dt_scan_memory(unsigned long node, const char *uname,
int depth, void *data)
{
const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
- const __be32 *reg, *endp;
- int l;
+ const __be32 *reg, *endp, *prop;
+ int l, dt_mem_addr_cells, dt_mem_size_cells;
/* We are scanning "memory" nodes only */
if (type == NULL) {
@@ -912,11 +912,22 @@ int __init early_init_dt_scan_memory(unsigned long node, const char *uname,
pr_debug("memory scan node %s, reg size %d,\n", uname, l);
- while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
+
+ dt_mem_size_cells = dt_root_size_cells;
+ prop = of_get_flat_dt_prop(node, "#size-cells", NULL);
+ if (prop)
+ dt_mem_size_cells = be32_to_cpup(prop);
+
+ dt_mem_addr_cells = dt_root_addr_cells;
+ prop = of_get_flat_dt_prop(node, "#address-cells", NULL);
+ if (prop)
+ dt_mem_addr_cells = be32_to_cpup(prop);
+
+ while ((endp - reg) >= (dt_mem_addr_cells + dt_mem_size_cells)) {
u64 base, size;
- base = dt_mem_next_cell(dt_root_addr_cells, ®);
- size = dt_mem_next_cell(dt_root_size_cells, ®);
+ base = dt_mem_next_cell(dt_mem_addr_cells, ®);
+ size = dt_mem_next_cell(dt_mem_size_cells, ®);
if (size == 0)
continue;
--
1.9.1
next reply other threads:[~2015-10-01 12:18 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-01 12:18 Vineet Gupta [this message]
2015-10-01 12:18 ` [PATCH v2] of/fdt: Allow memory node and root to have different size/address cells Vineet Gupta
2015-10-01 12:18 ` Vineet Gupta
2015-10-01 12:21 ` Arnd Bergmann
2015-10-03 8:08 ` Vineet Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1443701901-362-1-git-send-email-vgupta@synopsys.com \
--to=vineet.gupta1-hkixbcoqz3hwk0htik3j/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=kbuild-all-JC7UmRfGjtg@public.gmane.org \
--cc=linux-arch-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lkp-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.