From: Marc Sune <marcdevel@gmail.com>
To: dev@dpdk.org
Subject: [PATCH v5 1/4] ethdev: Added ETH_SPEED_CAP bitmap for ports
Date: Sun, 4 Oct 2015 23:12:44 +0200 [thread overview]
Message-ID: <1443993167-1150-2-git-send-email-marcdevel@gmail.com> (raw)
In-Reply-To: <1443993167-1150-1-git-send-email-marcdevel@gmail.com>
Added constants and bitmap to struct rte_eth_dev_info to be used by PMDs.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
---
lib/librte_ether/rte_ethdev.h | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 8a8c82b..951a423 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -811,6 +811,29 @@ struct rte_eth_conf {
#define DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM 0x00000080 /**< Used for tunneling packet. */
#define DEV_TX_OFFLOAD_QINQ_INSERT 0x00000100
+/**
+ * Device supported speeds
+ */
+#define ETH_SPEED_CAP_NOT_PHY (0) /*< No phy media > */
+#define ETH_SPEED_CAP_10M_HD (1 << 0) /*< 10 Mbps half-duplex> */
+#define ETH_SPEED_CAP_10M_FD (1 << 1) /*< 10 Mbps full-duplex> */
+#define ETH_SPEED_CAP_100M_HD (1 << 2) /*< 100 Mbps half-duplex> */
+#define ETH_SPEED_CAP_100M_FD (1 << 3) /*< 100 Mbps full-duplex> */
+#define ETH_SPEED_CAP_1G (1 << 4) /*< 1 Gbps > */
+#define ETH_SPEED_CAP_2_5G (1 << 5) /*< 2.5 Gbps > */
+#define ETH_SPEED_CAP_5G (1 << 6) /*< 5 Gbps > */
+#define ETH_SPEED_CAP_10G (1 << 7) /*< 10 Mbps > */
+#define ETH_SPEED_CAP_20G (1 << 8) /*< 20 Gbps > */
+#define ETH_SPEED_CAP_25G (1 << 9) /*< 25 Gbps > */
+#define ETH_SPEED_CAP_40G (1 << 10) /*< 40 Gbps > */
+#define ETH_SPEED_CAP_50G (1 << 11) /*< 50 Gbps > */
+#define ETH_SPEED_CAP_56G (1 << 12) /*< 56 Gbps > */
+#define ETH_SPEED_CAP_100G (1 << 13) /*< 100 Gbps > */
+
+
+/**
+ * Ethernet device information
+ */
struct rte_eth_dev_info {
struct rte_pci_device *pci_dev; /**< Device PCI information. */
const char *driver_name; /**< Device Driver name. */
@@ -837,6 +860,7 @@ struct rte_eth_dev_info {
uint16_t vmdq_queue_base; /**< First queue ID for VMDQ pools. */
uint16_t vmdq_queue_num; /**< Queue number for VMDQ pools. */
uint16_t vmdq_pool_base; /**< First ID of VMDQ pools. */
+ uint32_t speed_capa; /**< Supported speeds bitmap (ETH_SPEED_CAP_). */
};
/** Maximum name length for extended statistics counters */
--
2.1.4
next prev parent reply other threads:[~2015-10-04 21:13 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-11 23:45 [RFC PATCH 0/2] ethdev: add port speed capability bitmap Marc Sune
2015-05-11 23:45 ` [RFC PATCH 1/2] Added ETH_SPEED_CAP bitmap in rte_eth_dev_info Marc Sune
2015-05-25 17:46 ` Stephen Hemminger
2015-05-26 8:41 ` Marc Sune
2015-05-26 15:03 ` Stephen Hemminger
2015-05-26 15:09 ` Marc Sune
2015-05-11 23:45 ` [RFC PATCH 2/2] Filling speed capability bitmaps in the PMDs Marc Sune
2015-05-25 16:32 ` [RFC PATCH 0/2] ethdev: add port speed capability bitmap Marc Sune
2015-05-26 19:50 ` [PATCH v2 " Marc Sune
2015-05-26 19:50 ` [PATCH v2 1/2] Added ETH_SPEED_CAP bitmap in rte_eth_dev_info Marc Sune
2015-05-27 4:02 ` Thomas Monjalon
2015-05-27 9:15 ` Marc Sune
2015-05-29 18:23 ` Thomas Monjalon
2015-06-08 8:50 ` Marc Sune
2015-06-11 9:08 ` Thomas Monjalon
2015-06-11 14:35 ` Marc Sune
2015-05-26 19:50 ` [PATCH v2 2/2] Filling speed capability bitmaps in the PMDs Marc Sune
2015-05-26 21:20 ` Igor Ryzhov
2015-05-27 8:59 ` Marc Sune
2015-08-28 23:20 ` [PATCH v3 0/2] ethdev: add port speed capability bitmap Marc Sune
2015-08-28 23:20 ` [PATCH v3 1/2] Added ETH_SPEED_ bitmap in rte_eth_dev_info Marc Sune
2015-08-28 23:20 ` [PATCH v3 2/2] Filling speed capability bitmaps in the PMDs Marc Sune
2015-08-29 0:16 ` [PATCH v4 0/2] ethdev: add port speed capability bitmap Marc Sune
2015-08-29 0:16 ` [PATCH v4 1/2] Added ETH_SPEED_ bitmap in rte_eth_dev_info Marc Sune
2015-08-29 0:16 ` [PATCH v4 2/2] Filling speed capability bitmaps in the PMDs Marc Sune
2015-09-07 20:52 ` [PATCH v4 0/2] ethdev: add port speed capability bitmap Marc Sune
2015-09-08 10:03 ` Nélio Laranjeiro
2015-09-08 20:26 ` Marc Sune
2015-09-09 13:10 ` Nélio Laranjeiro
2015-09-09 13:33 ` Thomas Monjalon
2015-09-13 19:14 ` Marc Sune
2015-09-13 21:18 ` Thomas Monjalon
2015-09-14 10:02 ` Nélio Laranjeiro
2015-09-14 10:52 ` Morten Brørup
2015-09-14 21:33 ` Marc Sune
2015-09-14 22:50 ` Morten Brørup
2015-09-15 8:25 ` Nélio Laranjeiro
2015-09-15 8:48 ` Marc Sune
2015-09-15 9:39 ` Morten Brørup
2015-09-15 10:04 ` Adrien Mazarguil
2015-09-15 10:24 ` Morten Brørup
2015-09-15 21:20 ` Marc Sune
2015-09-16 14:41 ` Adrien Mazarguil
2015-09-15 7:05 ` Thomas Monjalon
2015-09-15 7:33 ` Morten Brørup
2015-09-15 9:06 ` Morten Brørup
2015-10-04 21:12 ` [PATCH v5 0/4] ethdev: add speed capabilities and refactor link API Marc Sune
2015-10-04 21:12 ` Marc Sune [this message]
2015-10-04 21:12 ` [PATCH v5 2/4] ethdev: Fill speed capability bitmaps in the PMDs Marc Sune
2015-10-04 21:12 ` [PATCH v5 3/4] ethdev: redesign link speed config API Marc Sune
2015-10-05 10:59 ` Neil Horman
2015-10-07 13:31 ` Marc Sune
2015-10-06 13:48 ` Nélio Laranjeiro
2015-10-07 13:37 ` Marc Sune
2016-01-28 17:33 ` Harish Patil
2016-02-02 2:20 ` Stephen Hemminger
2016-02-02 22:30 ` Marc
2016-02-11 15:27 ` Nélio Laranjeiro
2016-02-11 23:23 ` Marc
2015-10-04 21:12 ` [PATCH v5 4/4] doc: update with link changes Marc Sune
2015-10-04 21:21 ` [PATCH v5 0/4] ethdev: add speed capabilities and refactor link API Marc Sune
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1443993167-1150-2-git-send-email-marcdevel@gmail.com \
--to=marcdevel@gmail.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.