All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jacob Keller <jacob.e.keller@intel.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [next-queue 02/17] fm10k: set netdev features in one location
Date: Tue, 13 Oct 2015 16:38:59 -0700	[thread overview]
Message-ID: <1444779554-20464-2-git-send-email-jacob.e.keller@intel.com> (raw)
In-Reply-To: <1444779554-20464-1-git-send-email-jacob.e.keller@intel.com>

Don't change netdev hw_features later in fm10k_probe, instead set all
values inside fm10k_alloc_netdev. To do so, we need to know the MAC type
(whether it is PF or VF) in order to determine what to do. This helps
ensure that all logic regarding features is co-located.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
---
 drivers/net/ethernet/intel/fm10k/fm10k.h        |  2 +-
 drivers/net/ethernet/intel/fm10k/fm10k_netdev.c | 31 +++++++++++++++----------
 drivers/net/ethernet/intel/fm10k/fm10k_pci.c    |  9 +------
 3 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/drivers/net/ethernet/intel/fm10k/fm10k.h b/drivers/net/ethernet/intel/fm10k/fm10k.h
index 504d487fa800..4d4cd006fec1 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k.h
+++ b/drivers/net/ethernet/intel/fm10k/fm10k.h
@@ -484,7 +484,7 @@ void fm10k_netpoll(struct net_device *netdev);
 #endif
 
 /* Netdev */
-struct net_device *fm10k_alloc_netdev(void);
+struct net_device *fm10k_alloc_netdev(const struct fm10k_info *info);
 int fm10k_setup_rx_resources(struct fm10k_ring *);
 int fm10k_setup_tx_resources(struct fm10k_ring *);
 void fm10k_free_rx_resources(struct fm10k_ring *);
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c b/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c
index 96364c7b7719..38fe2d8c8388 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c
@@ -1391,8 +1391,9 @@ static const struct net_device_ops fm10k_netdev_ops = {
 
 #define DEFAULT_DEBUG_LEVEL_SHIFT 3
 
-struct net_device *fm10k_alloc_netdev(void)
+struct net_device *fm10k_alloc_netdev(const struct fm10k_info *info)
 {
+	netdev_features_t hw_features;
 	struct fm10k_intfc *interface;
 	struct net_device *dev;
 
@@ -1415,27 +1416,31 @@ struct net_device *fm10k_alloc_netdev(void)
 			 NETIF_F_TSO |
 			 NETIF_F_TSO6 |
 			 NETIF_F_TSO_ECN |
-			 NETIF_F_GSO_UDP_TUNNEL |
 			 NETIF_F_RXHASH |
 			 NETIF_F_RXCSUM;
 
+	/* Only the PF can support VXLAN and NVGRE tunnel offloads */
+	if (info->mac == fm10k_mac_pf) {
+		dev->hw_enc_features = NETIF_F_IP_CSUM |
+				       NETIF_F_TSO |
+				       NETIF_F_TSO6 |
+				       NETIF_F_TSO_ECN |
+				       NETIF_F_GSO_UDP_TUNNEL |
+				       NETIF_F_IPV6_CSUM |
+				       NETIF_F_SG;
+
+		dev->features |= NETIF_F_GSO_UDP_TUNNEL;
+	}
+
 	/* all features defined to this point should be changeable */
-	dev->hw_features |= dev->features;
+	hw_features = dev->features;
 
 	/* allow user to enable L2 forwarding acceleration */
-	dev->hw_features |= NETIF_F_HW_L2FW_DOFFLOAD;
+	hw_features |= NETIF_F_HW_L2FW_DOFFLOAD;
 
 	/* configure VLAN features */
 	dev->vlan_features |= dev->features;
 
-	/* configure tunnel offloads */
-	dev->hw_enc_features |= NETIF_F_IP_CSUM |
-				NETIF_F_TSO |
-				NETIF_F_TSO6 |
-				NETIF_F_TSO_ECN |
-				NETIF_F_GSO_UDP_TUNNEL |
-				NETIF_F_IPV6_CSUM;
-
 	/* we want to leave these both on as we cannot disable VLAN tag
 	 * insertion or stripping on the hardware since it is contained
 	 * in the FTAG and not in the frame itself.
@@ -1446,5 +1451,7 @@ struct net_device *fm10k_alloc_netdev(void)
 
 	dev->priv_flags |= IFF_UNICAST_FLT;
 
+	dev->hw_features |= hw_features;
+
 	return dev;
 }
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
index 0dece3c07727..a488bbade48b 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
@@ -1722,13 +1722,6 @@ static int fm10k_sw_init(struct fm10k_intfc *interface,
 					     pci_resource_len(pdev, 4));
 	hw->sw_addr = interface->sw_addr;
 
-	/* Only the PF can support VXLAN and NVGRE offloads */
-	if (hw->mac.type != fm10k_mac_pf) {
-		netdev->hw_enc_features = 0;
-		netdev->features &= ~NETIF_F_GSO_UDP_TUNNEL;
-		netdev->hw_features &= ~NETIF_F_GSO_UDP_TUNNEL;
-	}
-
 #ifdef CONFIG_DCB
 	/* initialize DCBNL interface */
 	fm10k_dcbnl_set_ops(netdev);
@@ -1896,7 +1889,7 @@ static int fm10k_probe(struct pci_dev *pdev,
 	pci_set_master(pdev);
 	pci_save_state(pdev);
 
-	netdev = fm10k_alloc_netdev();
+	netdev = fm10k_alloc_netdev(fm10k_info_tbl[ent->driver_data]);
 	if (!netdev) {
 		err = -ENOMEM;
 		goto err_alloc_netdev;
-- 
2.6.1.264.gbab76a9


  reply	other threads:[~2015-10-13 23:38 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-13 23:38 [Intel-wired-lan] [next-queue 01/17] fm10k: conditionally compile DCB and DebugFS support Jacob Keller
2015-10-13 23:38 ` Jacob Keller [this message]
2015-10-13 23:39 ` [Intel-wired-lan] [next-queue 03/17] fm10k: reinitialize queuing scheme after calling init_hw Jacob Keller
2015-10-13 23:39 ` [Intel-wired-lan] [next-queue 04/17] fm10k: reset max_queues on init_hw_vf failure Jacob Keller
2015-10-13 23:39 ` [Intel-wired-lan] [next-queue 05/17] fm10k: always check init_hw for errors Jacob Keller
2015-10-14  0:46   ` Allan, Bruce W
2015-10-14 15:57     ` Keller, Jacob E
2015-10-28  0:47   ` Singh, Krishneil K
2015-10-13 23:39 ` [Intel-wired-lan] [next-queue 06/17] fm10k: Correct typecast in fm10k_update_xc_addr_pf Jacob Keller
2015-10-14  0:46   ` Allan, Bruce W
2015-10-13 23:39 ` [Intel-wired-lan] [next-queue 07/17] fm10k: explicitly typecast vlan values to u16 Jacob Keller
2015-10-13 23:39 ` [Intel-wired-lan] [next-queue 08/17] fm10k: add statistics for actual DWORD count of mbmem mailbox Jacob Keller
2015-10-14  0:47   ` Allan, Bruce W
2015-10-13 23:39 ` [Intel-wired-lan] [next-queue 09/17] fm10k: rename mbx_tx_oversized statistic to mbx_tx_dropped Jacob Keller
2015-10-13 23:39 ` [Intel-wired-lan] [next-queue 10/17] fm10k: add TEB check to fm10k_gre_is_nvgre Jacob Keller
2015-10-14  0:47   ` Allan, Bruce W
2015-10-13 23:39 ` [Intel-wired-lan] [next-queue 11/17] fm10k: Add support for ITR scaling based on PCIe link speed Jacob Keller
2015-10-14  0:47   ` Allan, Bruce W
2015-10-13 23:39 ` [Intel-wired-lan] [next-queue 12/17] fm10k: introduce ITR_IS_ADAPTIVE macro Jacob Keller
2015-10-13 23:39 ` [Intel-wired-lan] [next-queue 13/17] fm10k: Update adaptive ITR algorithm Jacob Keller
2015-10-14 18:35   ` Alexander Duyck
2015-10-14 20:12     ` Keller, Jacob E
2015-10-14 22:40       ` Alexander Duyck
2015-10-14 23:50         ` Keller, Jacob E
2015-10-15  2:17           ` Alexander Duyck
2015-10-15 16:32             ` Keller, Jacob E
2015-10-13 23:39 ` [Intel-wired-lan] [next-queue 14/17] fm10k: use macro for default Tx and Rx ITR values Jacob Keller
2015-10-13 23:39 ` [Intel-wired-lan] [next-queue 15/17] fm10k: change default Tx ITR to 25usec Jacob Keller
2015-10-14 15:15   ` Alexander Duyck
2015-10-14 15:59     ` Keller, Jacob E
2015-10-14 16:23       ` Alexander Duyck
2015-10-14 16:31         ` Keller, Jacob E
2015-10-14 17:57         ` Keller, Jacob E
2015-10-14 23:27           ` Alexander Duyck
2015-10-14 23:44             ` Keller, Jacob E
2015-10-15  2:23               ` Alexander Duyck
2015-10-15 16:35                 ` Keller, Jacob E
2015-10-13 23:39 ` [Intel-wired-lan] [next-queue 16/17] fm10k: TRIVIAL fix typo of hardware Jacob Keller
2015-10-13 23:39 ` [Intel-wired-lan] [next-queue 17/17] fm10k: TRIVIAL cleanup order at top of fm10k_xmit_frame Jacob Keller
2015-10-14  0:46 ` [Intel-wired-lan] [next-queue 01/17] fm10k: conditionally compile DCB and DebugFS support Allan, Bruce W

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1444779554-20464-2-git-send-email-jacob.e.keller@intel.com \
    --to=jacob.e.keller@intel.com \
    --cc=intel-wired-lan@osuosl.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.