[Intel-wired-lan] [next-queue 05/17] fm10k: always check init_hw for errors

[Jacob Keller <jacob.e.keller@intel.com>]

A recent change to the SHARED code makes it such that in some flows,
init_hw may fail. For example, init_hw_vf will fail if the 1st queue is
not owned by the VF. However, previously some flows called init_hw
without checking the return code, or checked it but only to display a
diagnostic message.

Fix this by (a) always returning and preventing the netdevice from going
up, and (b) printing the diagnostic in every flow for consistency. This
should resolve an issue where VF drivers would attempt to come up
before the PF has finished assigning queues.

In addition, change the dmesg output to explicitly show the actual
function that failed, instead of combining reset_hw and init_hw into a
single check.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
---
 drivers/net/ethernet/intel/fm10k/fm10k_pci.c | 34 ++++++++++++++++++++++++----
 1 file changed, 29 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
index 48f0ef4545a0..9ad9f9164d91 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
@@ -166,9 +166,17 @@ static void fm10k_reinit(struct fm10k_intfc *interface)
 	interface->last_reset = jiffies + (10 * HZ);
 
 	/* reset and initialize the hardware so it is in a known state */
-	err = hw->mac.ops.reset_hw(hw) ? : hw->mac.ops.init_hw(hw);
-	if (err)
+	err = hw->mac.ops.reset_hw(hw);
+	if (err) {
+		dev_err(&interface->pdev->dev, "reset_hw failed: %d\n", err);
+		goto reinit_err;
+	}
+
+	err = hw->mac.ops.init_hw(hw);
+	if (err) {
 		dev_err(&interface->pdev->dev, "init_hw failed: %d\n", err);
+		goto reinit_err;
+	}
 
 	err = fm10k_init_queueing_scheme(interface);
 	if (err) {
@@ -202,6 +210,10 @@ static void fm10k_reinit(struct fm10k_intfc *interface)
 
 	fm10k_iov_resume(interface->pdev);
 
+reinit_err:
+	if (err)
+		netif_device_detach(netdev);
+
 	rtnl_unlock();
 
 	clear_bit(__FM10K_RESETTING, &interface->state);
@@ -1693,7 +1705,13 @@ static int fm10k_sw_init(struct fm10k_intfc *interface,
 	interface->last_reset = jiffies + (10 * HZ);
 
 	/* reset and initialize the hardware so it is in a known state */
-	err = hw->mac.ops.reset_hw(hw) ? : hw->mac.ops.init_hw(hw);
+	err = hw->mac.ops.reset_hw(hw);
+	if (err) {
+		dev_err(&pdev->dev, "reset_hw failed: %d\n", err);
+		return err;
+	}
+
+	err = hw->mac.ops.init_hw(hw);
 	if (err) {
 		dev_err(&pdev->dev, "init_hw failed: %d\n", err);
 		return err;
@@ -2077,8 +2095,10 @@ static int fm10k_resume(struct pci_dev *pdev)
 
 	/* reset hardware to known state */
 	err = hw->mac.ops.init_hw(&interface->hw);
-	if (err)
+	if (err) {
+		dev_err(&pdev->dev, "init_hw failed: %d\n", err);
 		return err;
+	}
 
 	/* reset statistics starting values */
 	hw->mac.ops.rebind_hw_stats(hw, &interface->stats);
@@ -2257,7 +2277,11 @@ static void fm10k_io_resume(struct pci_dev *pdev)
 	int err = 0;
 
 	/* reset hardware to known state */
-	hw->mac.ops.init_hw(&interface->hw);
+	err = hw->mac.ops.init_hw(&interface->hw);
+	if (err) {
+		dev_err(&pdev->dev, "init_hw failed: %d\n", err);
+		return;
+	}
 
 	/* reset statistics starting values */
 	hw->mac.ops.rebind_hw_stats(hw, &interface->stats);
-- 
2.6.1.264.gbab76a9