All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andy Gross <agross@codeaurora.org>
To: arm@kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
	linux-arm-msm@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] qcom dt changes for 4.4 *RESEND*
Date: Wed, 14 Oct 2015 17:10:18 -0500	[thread overview]
Message-ID: <1444860618-8192-1-git-send-email-agross@codeaurora.org> (raw)

The following changes since commit 6ff33f3902c3b1c5d0db6b1e2c70b6d76fba357f:

  Linux 4.3-rc1 (2015-09-12 16:35:56 -0700)

are available in the git repository at:

  git://codeaurora.org/quic/kernel/agross-msm.git tags/qcom-dt-for-4.4

for you to fetch changes up to 04edde250c3753798475f0a4dc0275dd52f707bd:

  ARM: dts: msm8974: fix typo in "disabled" property (2015-10-13 16:40:03 -0500)

----------------------------------------------------------------
Qualcomm ARM Based Device Tree Updates for v4.4

* Add DT binding document for SMEM
* Add SMD, RPM, and Regulator nodes on MSM8974
* Remove extra reg element from iadc device
* Remove redunandant i2c pinctrl properties on APQ8064
* Remove unnecessary eeprom label on IFC6410
* Remove unnecessary eeprom label from QS600
* Add PM8921 RTC support on APQ8064
* Add PM8921 pwrkey support on APQ8064
* Prefix GSBI6 uart pins on APQ8064 correctly
* Add missing GSBI7 uart pinctrl on APQ8064
* Add missing GSBI7 uart pinctrl on IFC6410
* Add missing GSBI7 pinctrl uart property on QS600
* Add pwrseq support for WLAN on IFC6410
* Add pwrseq support for WLAN on QS600
* Add notify led support on IFC6410
* Add SD card detect support onQS600
* Add #power-domain-cells property to documentation
* Add Qualcomm SMBB binding document
* Add PM8941 charge node
* Fix typo in disabled property on MSM8974

----------------------------------------------------------------
Bjorn Andersson (2):
      soc: qcom: Add device tree binding for SMEM
      ARM: dts: msm8974: Add smd, rpm and regulator nodes

Courtney Cavin (2):
      dt-binding: power: Add Qualcomm SMBB binding
      ARM: dts: qcom-pm8941: Add charger node

Michael Opdenacker (1):
      ARM: dts: msm8974: fix typo in "disabled" property

Rajendra Nayak (1):
      arm: dts: qcom: Add #power-domain-cells property

Srinivas Kandagatla (13):
      ARM: dts: apq8064: remove redundant i2c pinctrl properties
      ARM: dts: ifc6410: remove unnecessary eeprom label
      ARM: dts: qs600: remove unnecessary eeprom label
      ARM: dts: apq8064: add pm8921 rtc
      ARM: dts: apq8064: add pm8921 pwrkey support
      ARM: dts: apq8064: Prefix the gsbi6 uart pins correctly
      ARM: dts: apq8064: add missing gsbi7 uart pinctrl
      ARM: dts: ifc6410: Add missing pinctrl to gsbi7 uart
      ARM: dts: qs600: Add missing pinctrl property for gsbi7 uart
      ARM: dts: ifc6410: Add pwrseq support for WLAN
      ARM: dts: qs600: add pwrseq support to WLAN
      ARM: dts: apq8064-ifc6410: add notify led support.
      ARM: dts: qs600: Add SD card detect support.

Stephen Boyd (1):
      ARM: dts: qcom: Remove extra reg element from iadc device

 .../devicetree/bindings/clock/qcom,gcc.txt         |    4 +
 .../devicetree/bindings/clock/qcom,mmcc.txt        |    4 +
 .../devicetree/bindings/power_supply/qcom_smbb.txt |  131 ++++++++++++++++++++
 .../devicetree/bindings/soc/qcom/qcom,smem.txt     |   57 +++++++++
 arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts        |   48 ++++++-
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts         |   60 +++++++--
 arch/arm/boot/dts/qcom-apq8064.dtsi                |   43 ++++++-
 arch/arm/boot/dts/qcom-apq8084.dtsi                |    1 +
 arch/arm/boot/dts/qcom-msm8974.dtsi                |   78 +++++++++++-
 arch/arm/boot/dts/qcom-pm8941.dtsi                 |   24 +++-
 arch/arm64/boot/dts/qcom/msm8916.dtsi              |    1 +
 11 files changed, 434 insertions(+), 17 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/power_supply/qcom_smbb.txt
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smem.txt

WARNING: multiple messages have this Message-ID (diff)
From: agross@codeaurora.org (Andy Gross)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] qcom dt changes for 4.4 *RESEND*
Date: Wed, 14 Oct 2015 17:10:18 -0500	[thread overview]
Message-ID: <1444860618-8192-1-git-send-email-agross@codeaurora.org> (raw)

The following changes since commit 6ff33f3902c3b1c5d0db6b1e2c70b6d76fba357f:

  Linux 4.3-rc1 (2015-09-12 16:35:56 -0700)

are available in the git repository at:

  git://codeaurora.org/quic/kernel/agross-msm.git tags/qcom-dt-for-4.4

for you to fetch changes up to 04edde250c3753798475f0a4dc0275dd52f707bd:

  ARM: dts: msm8974: fix typo in "disabled" property (2015-10-13 16:40:03 -0500)

----------------------------------------------------------------
Qualcomm ARM Based Device Tree Updates for v4.4

* Add DT binding document for SMEM
* Add SMD, RPM, and Regulator nodes on MSM8974
* Remove extra reg element from iadc device
* Remove redunandant i2c pinctrl properties on APQ8064
* Remove unnecessary eeprom label on IFC6410
* Remove unnecessary eeprom label from QS600
* Add PM8921 RTC support on APQ8064
* Add PM8921 pwrkey support on APQ8064
* Prefix GSBI6 uart pins on APQ8064 correctly
* Add missing GSBI7 uart pinctrl on APQ8064
* Add missing GSBI7 uart pinctrl on IFC6410
* Add missing GSBI7 pinctrl uart property on QS600
* Add pwrseq support for WLAN on IFC6410
* Add pwrseq support for WLAN on QS600
* Add notify led support on IFC6410
* Add SD card detect support onQS600
* Add #power-domain-cells property to documentation
* Add Qualcomm SMBB binding document
* Add PM8941 charge node
* Fix typo in disabled property on MSM8974

----------------------------------------------------------------
Bjorn Andersson (2):
      soc: qcom: Add device tree binding for SMEM
      ARM: dts: msm8974: Add smd, rpm and regulator nodes

Courtney Cavin (2):
      dt-binding: power: Add Qualcomm SMBB binding
      ARM: dts: qcom-pm8941: Add charger node

Michael Opdenacker (1):
      ARM: dts: msm8974: fix typo in "disabled" property

Rajendra Nayak (1):
      arm: dts: qcom: Add #power-domain-cells property

Srinivas Kandagatla (13):
      ARM: dts: apq8064: remove redundant i2c pinctrl properties
      ARM: dts: ifc6410: remove unnecessary eeprom label
      ARM: dts: qs600: remove unnecessary eeprom label
      ARM: dts: apq8064: add pm8921 rtc
      ARM: dts: apq8064: add pm8921 pwrkey support
      ARM: dts: apq8064: Prefix the gsbi6 uart pins correctly
      ARM: dts: apq8064: add missing gsbi7 uart pinctrl
      ARM: dts: ifc6410: Add missing pinctrl to gsbi7 uart
      ARM: dts: qs600: Add missing pinctrl property for gsbi7 uart
      ARM: dts: ifc6410: Add pwrseq support for WLAN
      ARM: dts: qs600: add pwrseq support to WLAN
      ARM: dts: apq8064-ifc6410: add notify led support.
      ARM: dts: qs600: Add SD card detect support.

Stephen Boyd (1):
      ARM: dts: qcom: Remove extra reg element from iadc device

 .../devicetree/bindings/clock/qcom,gcc.txt         |    4 +
 .../devicetree/bindings/clock/qcom,mmcc.txt        |    4 +
 .../devicetree/bindings/power_supply/qcom_smbb.txt |  131 ++++++++++++++++++++
 .../devicetree/bindings/soc/qcom/qcom,smem.txt     |   57 +++++++++
 arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts        |   48 ++++++-
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts         |   60 +++++++--
 arch/arm/boot/dts/qcom-apq8064.dtsi                |   43 ++++++-
 arch/arm/boot/dts/qcom-apq8084.dtsi                |    1 +
 arch/arm/boot/dts/qcom-msm8974.dtsi                |   78 +++++++++++-
 arch/arm/boot/dts/qcom-pm8941.dtsi                 |   24 +++-
 arch/arm64/boot/dts/qcom/msm8916.dtsi              |    1 +
 11 files changed, 434 insertions(+), 17 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/power_supply/qcom_smbb.txt
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smem.txt

             reply	other threads:[~2015-10-14 22:10 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-14 22:10 Andy Gross [this message]
2015-10-14 22:10 ` [GIT PULL] qcom dt changes for 4.4 *RESEND* Andy Gross
2015-10-15 15:21 ` Arnd Bergmann
2015-10-15 15:21   ` Arnd Bergmann
  -- strict thread matches above, loose matches on Subject: below --
2015-10-14 22:10 Andy Gross
2015-10-14 22:10 ` Andy Gross
2015-10-14 22:12 ` Andy Gross
2015-10-14 22:12   ` Andy Gross

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1444860618-8192-1-git-send-email-agross@codeaurora.org \
    --to=agross@codeaurora.org \
    --cc=arm@kernel.org \
    --cc=arnd@arndb.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=olof@lixom.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.