From: Lu Baolu <baolu.lu@linux.intel.com>
To: Mathias Nyman <mathias.nyman@intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Alan Stern <stern@rowland.harvard.edu>
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
Lu Baolu <baolu.lu@linux.intel.com>
Subject: [PATCH 09/12] x86: early_printk: add USB3 debug port earlyprintk support
Date: Wed, 28 Oct 2015 16:00:40 +0800 [thread overview]
Message-ID: <1446019243-5565-10-git-send-email-baolu.lu@linux.intel.com> (raw)
In-Reply-To: <1446019243-5565-1-git-send-email-baolu.lu@linux.intel.com>
Add support for early printk by writing debug messages to the USB3
debug port. Users can use this type of early printk by specifying
kernel parameter of "earlyprintk=xdbc". This gives users a chance
of providing debug output.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
---
Documentation/kernel-parameters.txt | 1 +
arch/x86/kernel/early_printk.c | 5 +++++
drivers/usb/early/xhci-dbc.c | 43 +++++++++++++++++++++++++++++++++++++
include/linux/usb/xhci-dbc.h | 5 +++++
4 files changed, 54 insertions(+)
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 22a4b68..b65b07f 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1032,6 +1032,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
earlyprintk=ttySn[,baudrate]
earlyprintk=dbgp[debugController#]
earlyprintk=pciserial,bus:device.function[,baudrate]
+ earlyprintk=xdbc[xhciController#]
earlyprintk is useful when the kernel crashes before
the normal console is initialized. It is not enabled by
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index eec40f5..5341a16 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -17,6 +17,7 @@
#include <asm/intel-mid.h>
#include <asm/pgtable.h>
#include <linux/usb/ehci_def.h>
+#include <linux/usb/xhci-dbc.h>
#include <linux/efi.h>
#include <asm/efi.h>
#include <asm/pci_x86.h>
@@ -373,6 +374,10 @@ static int __init setup_early_printk(char *buf)
if (!strncmp(buf, "dbgp", 4) && !early_dbgp_init(buf + 4))
early_console_register(&early_dbgp_console, keep);
#endif
+#ifdef CONFIG_EARLY_PRINTK_XDBC
+ if (!strncmp(buf, "xdbc", 4) && !early_xdbc_init(buf + 4))
+ early_console_register(&early_xdbc_console, keep);
+#endif
#ifdef CONFIG_HVC_XEN
if (!strncmp(buf, "xen", 3))
early_console_register(&xenboot_console, keep);
diff --git a/drivers/usb/early/xhci-dbc.c b/drivers/usb/early/xhci-dbc.c
index aaf655f..68a7139 100644
--- a/drivers/usb/early/xhci-dbc.c
+++ b/drivers/usb/early/xhci-dbc.c
@@ -10,6 +10,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/console.h>
#include <linux/pci_regs.h>
#include <linux/pci_ids.h>
#include <linux/bootmem.h>
@@ -1332,3 +1333,45 @@ int xdbc_bulk_write(const char *bytes, int size)
return ret;
}
+
+/*
+ * Start a bulk-in or bulk-out transfer, wait until transfer completion
+ * or error. Return the count of actually transferred bytes or error.
+ */
+static void early_xdbc_write(struct console *con, const char *str, u32 n)
+{
+ int chunk, ret;
+ static char buf[XDBC_MAX_PACKET];
+ int use_cr = 0;
+
+ if (!xdbcp->xdbc_reg)
+ return;
+ memset(buf, 0, XDBC_MAX_PACKET);
+ while (n > 0) {
+ for (chunk = 0; chunk < XDBC_MAX_PACKET && n > 0;
+ str++, chunk++, n--) {
+ if (!use_cr && *str == '\n') {
+ use_cr = 1;
+ buf[chunk] = '\r';
+ str--;
+ n++;
+ continue;
+ }
+ if (use_cr)
+ use_cr = 0;
+ buf[chunk] = *str;
+ }
+ if (chunk > 0) {
+ ret = xdbc_bulk_write(buf, chunk);
+ if (ret < 0)
+ break;
+ }
+ }
+}
+
+struct console early_xdbc_console = {
+ .name = "earlyxdbc",
+ .write = early_xdbc_write,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
diff --git a/include/linux/usb/xhci-dbc.h b/include/linux/usb/xhci-dbc.h
index 289ba58..a556eb8 100644
--- a/include/linux/usb/xhci-dbc.h
+++ b/include/linux/usb/xhci-dbc.h
@@ -216,4 +216,9 @@ struct xdbc_state {
#define xdbc_read64(regs) xhci_read_64(NULL, (regs))
#define xdbc_write64(val, regs) xhci_write_64(NULL, (val), (regs))
+#ifdef CONFIG_EARLY_PRINTK_XDBC
+extern int early_xdbc_init(char *s);
+extern struct console early_xdbc_console;
+#endif /* CONFIG_EARLY_PRINTK_XDBC */
+
#endif /* __LINUX_XHCI_DBC_H */
--
2.1.4
next prev parent reply other threads:[~2015-10-28 8:03 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-28 8:00 [PATCH 00/12] usb: early: add support for early printk through USB3 debug port Lu Baolu
2015-10-28 8:00 ` [PATCH 01/12] usb: xhci: expose xhci extended capabilities via debugfs Lu Baolu
2015-10-28 9:27 ` Oliver Neukum
2015-10-29 1:18 ` Lu, Baolu
2015-10-28 12:40 ` Greg Kroah-Hartman
2015-10-29 1:22 ` Lu, Baolu
2015-10-30 12:09 ` Lu, Baolu
2015-10-30 14:45 ` Greg Kroah-Hartman
2015-11-02 13:07 ` Lu, Baolu
2015-10-28 8:00 ` [PATCH 02/12] x86: fixmap: add permanent fixmap for xhci debug port Lu Baolu
2015-10-28 8:00 ` [PATCH 03/12] usb: xhci: dbc: probe and setup xhci debug capability Lu Baolu
2015-10-28 8:00 ` [PATCH 04/12] usb: xhci: dbc: add support for Intel xHCI dbc quirk Lu Baolu
2015-10-28 8:00 ` [PATCH 05/12] usb: xhci: dbc: add debug buffer Lu Baolu
2015-10-28 8:00 ` [PATCH 06/12] usb: xhci: dbc: add bulk out and bulk in interfaces Lu Baolu
2015-10-28 8:00 ` [PATCH 07/12] usb: xhci: dbc: handle dbc-configured exit Lu Baolu
2015-10-28 8:00 ` [PATCH 08/12] usb: xhci: dbc: handle endpoint stall Lu Baolu
2015-10-28 8:00 ` Lu Baolu [this message]
2015-10-28 8:00 ` [PATCH 10/12] usb: xhci: dbc: add handshake between debug target and host Lu Baolu
2015-10-28 8:00 ` [PATCH 11/12] usb: serial: usb_debug: add support for dbc debug device Lu Baolu
2015-10-28 9:10 ` Johan Hovold
2015-10-29 1:24 ` Lu, Baolu
2015-10-28 12:33 ` Greg Kroah-Hartman
2015-10-29 1:43 ` Lu, Baolu
2015-10-30 11:46 ` Lu, Baolu
2015-10-30 14:41 ` Greg Kroah-Hartman
2015-10-31 5:37 ` Lu, Baolu
2015-10-28 8:00 ` [PATCH 12/12] usb: doc: add document for xHCI DbC driver Lu Baolu
2015-11-03 9:42 ` [PATCH 00/12] usb: early: add support for early printk through USB3 debug port Dave Young
2015-11-04 0:40 ` Lu, Baolu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1446019243-5565-10-git-send-email-baolu.lu@linux.intel.com \
--to=baolu.lu@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.