From: dawei chien <dawei.chien@mediatek.com>
To: Eduardo Valentin <edubezval@gmail.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>,
"Rafael J. Wysocki" <rjw@rjwysocki.net>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Daniel Kurtz <djkurtz@chromium.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
linux-mediatek@lists.infradead.org, srv_heupstream@mediatek.com,
Sascha Hauer <kernel@pengutronix.de>
Subject: Re: [PATCH v3 2/2] arm64: dts: mt8173: Add thermal zone node for mt8173.
Date: Thu, 5 Nov 2015 19:10:50 +0800 [thread overview]
Message-ID: <1446721850.4016.58.camel@mtksdaap41> (raw)
In-Reply-To: <20151104194111.GD14127@localhost.localdomain>
On Wed, 2015-11-04 at 11:41 -0800, Eduardo Valentin wrote:
> On Thu, Oct 22, 2015 at 08:02:39PM +0800, Dawei Chien wrote:
> > Add thermal zone node to mt8173.dtsi.
> >
> > Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
> > ---
> > This patch is base on
> > https://patchwork.kernel.org/patch/7249821/
> > https://patchwork.kernel.org/patch/7249861/
> > https://patchwork.kernel.org/patch/7249891/
> > ---
> > arch/arm64/boot/dts/mediatek/mt8173.dtsi | 90 ++++++++++++++++++++++++++++++
>
> This patch adds also the static / dynamic power models too. Can you
> please split this patch in two: one for the thermal zones, one for the
> models.
Thank you for reviewing, I will split this patch in two and resend
again.
> > 1 file changed, 90 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > index 3b18f37..eaf12bf 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > @@ -16,6 +16,7 @@
> > #include <dt-bindings/interrupt-controller/arm-gic.h>
> > #include <dt-bindings/power/mt8173-power.h>
> > #include <dt-bindings/reset-controller/mt8173-resets.h>
> > +#include <dt-bindings/thermal/mt8173.h>
> > #include "mt8173-pinfunc.h"
> >
> > / {
> > @@ -54,6 +55,18 @@
> > reg = <0x000>;
> > enable-method = "psci";
> > cpu-idle-states = <&CPU_SLEEP_0>;
> > + static-power-points = <
> > + 859000 43
> > + 908000 52
> > + 983000 86
> > + 1009000 123
> > + 1028000 138
> > + 1083000 172
> > + 1110900 180
> > + 1125000 192
> > + >;
> > + dynamic-power-coefficient = <263>;
> > + #cooling-cells = <2>;
> > };
> >
> > cpu1: cpu@1 {
> > @@ -62,6 +75,17 @@
> > reg = <0x001>;
> > enable-method = "psci";
> > cpu-idle-states = <&CPU_SLEEP_0>;
> > + static-power-points = <
> > + 859000 43
> > + 908000 52
> > + 983000 86
> > + 1009000 123
> > + 1028000 138
> > + 1083000 172
> > + 1110900 180
> > + 1125000 192
> > + >;
> > + dynamic-power-coefficient = <263>;
> > };
> >
> > cpu2: cpu@100 {
> > @@ -70,6 +94,18 @@
> > reg = <0x100>;
> > enable-method = "psci";
> > cpu-idle-states = <&CPU_SLEEP_0>;
> > + static-power-points = <
> > + 828000 72
> > + 867000 90
> > + 927000 156
> > + 968000 181
> > + 1007000 298
> > + 1049000 435
> > + 1089900 533
> > + 1125000 533
> > + >;
> > + dynamic-power-coefficient = <530>;
> > + #cooling-cells = <2>;
> > };
> >
> > cpu3: cpu@101 {
> > @@ -78,6 +114,17 @@
> > reg = <0x101>;
> > enable-method = "psci";
> > cpu-idle-states = <&CPU_SLEEP_0>;
> > + static-power-points = <
> > + 828000 72
> > + 867000 90
> > + 927000 156
> > + 968000 181
> > + 1007000 298
> > + 1049000 435
> > + 1089900 533
> > + 1125000 533
> > + >;
> > + dynamic-power-coefficient = <530>;
> > };
> >
> > idle-states {
> > @@ -116,6 +163,49 @@
> > clock-output-names = "clk32k";
> > };
> >
> > + thermal-zones {
> > + cpu_thermal: cpu_thermal {
> > + polling-delay-passive = <1000>; /* milliseconds */
> > + polling-delay = <1000>; /* milliseconds */
> > +
> > + thermal-sensors = <&thermal MT8173_THERMAL_ZONE_CA57>;
> > + sustainable-power = <1500>;
> > +
> > + trips {
> > + threshold: trip-point@0 {
> > + temperature = <68000>;
> > + hysteresis = <2000>;
> > + type = "passive";
> > + };
> > +
> > + target: trip-point@1 {
> > + temperature = <85000>;
> > + hysteresis = <2000>;
> > + type = "passive";
> > + };
> > +
> > + cpu_crit: cpu_crit@0 {
> > + temperature = <115000>;
> > + hysteresis = <2000>;
> > + type = "critical";
> > + };
> > + };
> > +
> > + cooling-maps {
> > + map@0 {
> > + trip = <&target>;
> > + cooling-device = <&cpu0 0 0>;
> > + contribution = <1024>;
> > + };
> > + map@1 {
> > + trip = <&target>;
> > + cooling-device = <&cpu2 0 0>;
> > + contribution = <2048>;
> > + };
> > + };
> > + };
> > + };
> > +
> > timer {
> > compatible = "arm,armv8-timer";
> > interrupt-parent = <&gic>;
> > --
> > 1.7.9.5
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: dawei.chien@mediatek.com (dawei chien)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/2] arm64: dts: mt8173: Add thermal zone node for mt8173.
Date: Thu, 5 Nov 2015 19:10:50 +0800 [thread overview]
Message-ID: <1446721850.4016.58.camel@mtksdaap41> (raw)
In-Reply-To: <20151104194111.GD14127@localhost.localdomain>
On Wed, 2015-11-04 at 11:41 -0800, Eduardo Valentin wrote:
> On Thu, Oct 22, 2015 at 08:02:39PM +0800, Dawei Chien wrote:
> > Add thermal zone node to mt8173.dtsi.
> >
> > Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
> > ---
> > This patch is base on
> > https://patchwork.kernel.org/patch/7249821/
> > https://patchwork.kernel.org/patch/7249861/
> > https://patchwork.kernel.org/patch/7249891/
> > ---
> > arch/arm64/boot/dts/mediatek/mt8173.dtsi | 90 ++++++++++++++++++++++++++++++
>
> This patch adds also the static / dynamic power models too. Can you
> please split this patch in two: one for the thermal zones, one for the
> models.
Thank you for reviewing, I will split this patch in two and resend
again.
> > 1 file changed, 90 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > index 3b18f37..eaf12bf 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > @@ -16,6 +16,7 @@
> > #include <dt-bindings/interrupt-controller/arm-gic.h>
> > #include <dt-bindings/power/mt8173-power.h>
> > #include <dt-bindings/reset-controller/mt8173-resets.h>
> > +#include <dt-bindings/thermal/mt8173.h>
> > #include "mt8173-pinfunc.h"
> >
> > / {
> > @@ -54,6 +55,18 @@
> > reg = <0x000>;
> > enable-method = "psci";
> > cpu-idle-states = <&CPU_SLEEP_0>;
> > + static-power-points = <
> > + 859000 43
> > + 908000 52
> > + 983000 86
> > + 1009000 123
> > + 1028000 138
> > + 1083000 172
> > + 1110900 180
> > + 1125000 192
> > + >;
> > + dynamic-power-coefficient = <263>;
> > + #cooling-cells = <2>;
> > };
> >
> > cpu1: cpu at 1 {
> > @@ -62,6 +75,17 @@
> > reg = <0x001>;
> > enable-method = "psci";
> > cpu-idle-states = <&CPU_SLEEP_0>;
> > + static-power-points = <
> > + 859000 43
> > + 908000 52
> > + 983000 86
> > + 1009000 123
> > + 1028000 138
> > + 1083000 172
> > + 1110900 180
> > + 1125000 192
> > + >;
> > + dynamic-power-coefficient = <263>;
> > };
> >
> > cpu2: cpu at 100 {
> > @@ -70,6 +94,18 @@
> > reg = <0x100>;
> > enable-method = "psci";
> > cpu-idle-states = <&CPU_SLEEP_0>;
> > + static-power-points = <
> > + 828000 72
> > + 867000 90
> > + 927000 156
> > + 968000 181
> > + 1007000 298
> > + 1049000 435
> > + 1089900 533
> > + 1125000 533
> > + >;
> > + dynamic-power-coefficient = <530>;
> > + #cooling-cells = <2>;
> > };
> >
> > cpu3: cpu at 101 {
> > @@ -78,6 +114,17 @@
> > reg = <0x101>;
> > enable-method = "psci";
> > cpu-idle-states = <&CPU_SLEEP_0>;
> > + static-power-points = <
> > + 828000 72
> > + 867000 90
> > + 927000 156
> > + 968000 181
> > + 1007000 298
> > + 1049000 435
> > + 1089900 533
> > + 1125000 533
> > + >;
> > + dynamic-power-coefficient = <530>;
> > };
> >
> > idle-states {
> > @@ -116,6 +163,49 @@
> > clock-output-names = "clk32k";
> > };
> >
> > + thermal-zones {
> > + cpu_thermal: cpu_thermal {
> > + polling-delay-passive = <1000>; /* milliseconds */
> > + polling-delay = <1000>; /* milliseconds */
> > +
> > + thermal-sensors = <&thermal MT8173_THERMAL_ZONE_CA57>;
> > + sustainable-power = <1500>;
> > +
> > + trips {
> > + threshold: trip-point at 0 {
> > + temperature = <68000>;
> > + hysteresis = <2000>;
> > + type = "passive";
> > + };
> > +
> > + target: trip-point at 1 {
> > + temperature = <85000>;
> > + hysteresis = <2000>;
> > + type = "passive";
> > + };
> > +
> > + cpu_crit: cpu_crit at 0 {
> > + temperature = <115000>;
> > + hysteresis = <2000>;
> > + type = "critical";
> > + };
> > + };
> > +
> > + cooling-maps {
> > + map at 0 {
> > + trip = <&target>;
> > + cooling-device = <&cpu0 0 0>;
> > + contribution = <1024>;
> > + };
> > + map at 1 {
> > + trip = <&target>;
> > + cooling-device = <&cpu2 0 0>;
> > + contribution = <2048>;
> > + };
> > + };
> > + };
> > + };
> > +
> > timer {
> > compatible = "arm,armv8-timer";
> > interrupt-parent = <&gic>;
> > --
> > 1.7.9.5
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> > the body of a message to majordomo at vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: dawei chien <dawei.chien@mediatek.com>
To: Eduardo Valentin <edubezval@gmail.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>,
"Rafael J. Wysocki" <rjw@rjwysocki.net>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Daniel Kurtz <djkurtz@chromium.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
"Daniel Lezcano" <daniel.lezcano@linaro.org>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-pm@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>,
<srv_heupstream@mediatek.com>,
Sascha Hauer <kernel@pengutronix.de>
Subject: Re: [PATCH v3 2/2] arm64: dts: mt8173: Add thermal zone node for mt8173.
Date: Thu, 5 Nov 2015 19:10:50 +0800 [thread overview]
Message-ID: <1446721850.4016.58.camel@mtksdaap41> (raw)
In-Reply-To: <20151104194111.GD14127@localhost.localdomain>
On Wed, 2015-11-04 at 11:41 -0800, Eduardo Valentin wrote:
> On Thu, Oct 22, 2015 at 08:02:39PM +0800, Dawei Chien wrote:
> > Add thermal zone node to mt8173.dtsi.
> >
> > Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
> > ---
> > This patch is base on
> > https://patchwork.kernel.org/patch/7249821/
> > https://patchwork.kernel.org/patch/7249861/
> > https://patchwork.kernel.org/patch/7249891/
> > ---
> > arch/arm64/boot/dts/mediatek/mt8173.dtsi | 90 ++++++++++++++++++++++++++++++
>
> This patch adds also the static / dynamic power models too. Can you
> please split this patch in two: one for the thermal zones, one for the
> models.
Thank you for reviewing, I will split this patch in two and resend
again.
> > 1 file changed, 90 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > index 3b18f37..eaf12bf 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > @@ -16,6 +16,7 @@
> > #include <dt-bindings/interrupt-controller/arm-gic.h>
> > #include <dt-bindings/power/mt8173-power.h>
> > #include <dt-bindings/reset-controller/mt8173-resets.h>
> > +#include <dt-bindings/thermal/mt8173.h>
> > #include "mt8173-pinfunc.h"
> >
> > / {
> > @@ -54,6 +55,18 @@
> > reg = <0x000>;
> > enable-method = "psci";
> > cpu-idle-states = <&CPU_SLEEP_0>;
> > + static-power-points = <
> > + 859000 43
> > + 908000 52
> > + 983000 86
> > + 1009000 123
> > + 1028000 138
> > + 1083000 172
> > + 1110900 180
> > + 1125000 192
> > + >;
> > + dynamic-power-coefficient = <263>;
> > + #cooling-cells = <2>;
> > };
> >
> > cpu1: cpu@1 {
> > @@ -62,6 +75,17 @@
> > reg = <0x001>;
> > enable-method = "psci";
> > cpu-idle-states = <&CPU_SLEEP_0>;
> > + static-power-points = <
> > + 859000 43
> > + 908000 52
> > + 983000 86
> > + 1009000 123
> > + 1028000 138
> > + 1083000 172
> > + 1110900 180
> > + 1125000 192
> > + >;
> > + dynamic-power-coefficient = <263>;
> > };
> >
> > cpu2: cpu@100 {
> > @@ -70,6 +94,18 @@
> > reg = <0x100>;
> > enable-method = "psci";
> > cpu-idle-states = <&CPU_SLEEP_0>;
> > + static-power-points = <
> > + 828000 72
> > + 867000 90
> > + 927000 156
> > + 968000 181
> > + 1007000 298
> > + 1049000 435
> > + 1089900 533
> > + 1125000 533
> > + >;
> > + dynamic-power-coefficient = <530>;
> > + #cooling-cells = <2>;
> > };
> >
> > cpu3: cpu@101 {
> > @@ -78,6 +114,17 @@
> > reg = <0x101>;
> > enable-method = "psci";
> > cpu-idle-states = <&CPU_SLEEP_0>;
> > + static-power-points = <
> > + 828000 72
> > + 867000 90
> > + 927000 156
> > + 968000 181
> > + 1007000 298
> > + 1049000 435
> > + 1089900 533
> > + 1125000 533
> > + >;
> > + dynamic-power-coefficient = <530>;
> > };
> >
> > idle-states {
> > @@ -116,6 +163,49 @@
> > clock-output-names = "clk32k";
> > };
> >
> > + thermal-zones {
> > + cpu_thermal: cpu_thermal {
> > + polling-delay-passive = <1000>; /* milliseconds */
> > + polling-delay = <1000>; /* milliseconds */
> > +
> > + thermal-sensors = <&thermal MT8173_THERMAL_ZONE_CA57>;
> > + sustainable-power = <1500>;
> > +
> > + trips {
> > + threshold: trip-point@0 {
> > + temperature = <68000>;
> > + hysteresis = <2000>;
> > + type = "passive";
> > + };
> > +
> > + target: trip-point@1 {
> > + temperature = <85000>;
> > + hysteresis = <2000>;
> > + type = "passive";
> > + };
> > +
> > + cpu_crit: cpu_crit@0 {
> > + temperature = <115000>;
> > + hysteresis = <2000>;
> > + type = "critical";
> > + };
> > + };
> > +
> > + cooling-maps {
> > + map@0 {
> > + trip = <&target>;
> > + cooling-device = <&cpu0 0 0>;
> > + contribution = <1024>;
> > + };
> > + map@1 {
> > + trip = <&target>;
> > + cooling-device = <&cpu2 0 0>;
> > + contribution = <2048>;
> > + };
> > + };
> > + };
> > + };
> > +
> > timer {
> > compatible = "arm,armv8-timer";
> > interrupt-parent = <&gic>;
> > --
> > 1.7.9.5
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-11-05 11:10 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-22 12:02 [PATCH v3 0/2] thermal: mediatek: Add cpu power cooling model Dawei Chien
2015-10-22 12:02 ` Dawei Chien
2015-10-22 12:02 ` Dawei Chien
2015-10-22 12:02 ` [PATCH v3 1/2] " Dawei Chien
2015-10-22 12:02 ` Dawei Chien
2015-10-22 12:02 ` Dawei Chien
[not found] ` <1445515359-8587-2-git-send-email-dawei.chien-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2015-11-04 19:40 ` Eduardo Valentin
2015-11-04 19:40 ` Eduardo Valentin
2015-11-04 19:40 ` Eduardo Valentin
2015-11-05 11:10 ` dawei chien
2015-11-05 11:10 ` dawei chien
2015-11-05 11:10 ` dawei chien
2015-11-06 3:24 ` Viresh Kumar
2015-11-06 3:24 ` Viresh Kumar
2015-11-10 11:20 ` Javi Merino
2015-11-10 11:20 ` Javi Merino
2015-11-10 18:41 ` Eduardo Valentin
2015-11-10 18:41 ` Eduardo Valentin
[not found] ` <20151110184121.GC5240-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2015-11-11 9:36 ` Javi Merino
2015-11-11 9:36 ` Javi Merino
2015-11-11 9:36 ` Javi Merino
2015-11-13 5:02 ` Viresh Kumar
2015-11-13 5:02 ` Viresh Kumar
[not found] ` <1445515359-8587-1-git-send-email-dawei.chien-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2015-10-22 12:02 ` [PATCH v3 2/2] arm64: dts: mt8173: Add thermal zone node for mt8173 Dawei Chien
2015-10-22 12:02 ` Dawei Chien
2015-10-22 12:02 ` Dawei Chien
2015-10-28 15:39 ` Viresh Kumar
2015-10-28 15:39 ` Viresh Kumar
2015-11-02 10:51 ` dawei chien
2015-11-02 10:51 ` dawei chien
2015-11-02 10:51 ` dawei chien
2015-11-04 19:41 ` Eduardo Valentin
2015-11-04 19:41 ` Eduardo Valentin
2015-11-05 11:10 ` dawei chien [this message]
2015-11-05 11:10 ` dawei chien
2015-11-05 11:10 ` dawei chien
2015-10-28 15:44 ` [PATCH v3 0/2] thermal: mediatek: Add cpu power cooling model Viresh Kumar
2015-10-28 15:44 ` Viresh Kumar
2015-11-02 10:46 ` dawei chien
2015-11-02 10:46 ` dawei chien
2015-11-02 10:46 ` dawei chien
2015-11-02 12:10 ` Viresh Kumar
2015-11-02 12:10 ` Viresh Kumar
2015-11-02 12:10 ` Viresh Kumar
2015-11-05 11:09 ` dawei chien
2015-11-05 11:09 ` dawei chien
2015-11-05 11:09 ` dawei chien
2015-11-06 3:20 ` Viresh Kumar
2015-11-06 3:20 ` Viresh Kumar
2015-11-06 3:20 ` Viresh Kumar
2015-11-11 12:00 ` dawei chien
2015-11-11 12:00 ` dawei chien
2015-11-11 12:00 ` dawei chien
2015-11-02 15:53 ` Punit Agrawal
2015-11-02 15:53 ` Punit Agrawal
2015-11-02 15:53 ` Punit Agrawal
2015-11-02 16:10 ` Viresh Kumar
2015-11-02 16:10 ` Viresh Kumar
2015-11-04 19:36 ` Eduardo Valentin
2015-11-04 19:36 ` Eduardo Valentin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1446721850.4016.58.camel@mtksdaap41 \
--to=dawei.chien@mediatek.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=djkurtz@chromium.org \
--cc=edubezval@gmail.com \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=pawel.moll@arm.com \
--cc=rjw@rjwysocki.net \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=srv_heupstream@mediatek.com \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.