From: Matthew McClintock <mmcclint@codeaurora.org>
To: Andy Gross <agross@codeaurora.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: Matthew McClintock <mmcclint@codeaurora.org>,
Varadarajan Narayanan <varada@codeaurora.org>,
linux-kernel@vger.kernel.org,
qca-upstream.external@qca.qualcomm.com
Subject: [PATCH 4/5] qcom: ipq4019: Add basic board/dts support for IPQ4019 SoC
Date: Thu, 5 Nov 2015 16:07:55 -0600 [thread overview]
Message-ID: <1446761276-9111-5-git-send-email-mmcclint@codeaurora.org> (raw)
In-Reply-To: <1446761276-9111-1-git-send-email-mmcclint@codeaurora.org>
Add initial dts files and SoC support for IPQ4019
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 108 ++++++++++++++++++++++++++++++++++++
1 file changed, 108 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-ipq4019.dtsi
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
new file mode 100644
index 0000000..157a9ca
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -0,0 +1,108 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "skeleton.dtsi"
+#include <dt-bindings/reset/qcom,gcc-ipq4019.h>
+#include <dt-bindings/clock/qcom,gcc-ipq4019.h>
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ4019";
+ compatible = "qcom,ipq4019";
+ interrupt-parent = <&intc>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ clocks = <&gcc GCC_APPS_CLK_SRC>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ clocks = <&gcc GCC_APPS_CLK_SRC>;
+ };
+
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x2>;
+ clocks = <&gcc GCC_APPS_CLK_SRC>;
+ };
+
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x3>;
+ clocks = <&gcc GCC_APPS_CLK_SRC>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "simple-bus";
+
+ intc: interrupt-controller@b000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x0b000000 0x1000>,
+ <0x0b002000 0x1000>;
+ };
+
+ gcc: clock-controller@1800000 {
+ compatible = "qcom,gcc-ipq4019";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ reg = <0x1800000 0x60000>;
+ };
+
+ tlmm: pinctrl@0x01000000 {
+ compatible = "qcom,ipq4019-pinctrl";
+ reg = <0x01000000 0x300000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 208 0>;
+ };
+
+ serial@78af000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x78af000 0x200>;
+ interrupts = <0 107 0>;
+ status = "disabled";
+ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ };
+
+ serial@78b0000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x78b0000 0x200>;
+ interrupts = <0 108 0>;
+ status = "disabled";
+ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ };
+ };
+};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
WARNING: multiple messages have this Message-ID (diff)
From: mmcclint@codeaurora.org (Matthew McClintock)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/5] qcom: ipq4019: Add basic board/dts support for IPQ4019 SoC
Date: Thu, 5 Nov 2015 16:07:55 -0600 [thread overview]
Message-ID: <1446761276-9111-5-git-send-email-mmcclint@codeaurora.org> (raw)
In-Reply-To: <1446761276-9111-1-git-send-email-mmcclint@codeaurora.org>
Add initial dts files and SoC support for IPQ4019
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 108 ++++++++++++++++++++++++++++++++++++
1 file changed, 108 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-ipq4019.dtsi
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
new file mode 100644
index 0000000..157a9ca
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -0,0 +1,108 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "skeleton.dtsi"
+#include <dt-bindings/reset/qcom,gcc-ipq4019.h>
+#include <dt-bindings/clock/qcom,gcc-ipq4019.h>
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ4019";
+ compatible = "qcom,ipq4019";
+ interrupt-parent = <&intc>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ clocks = <&gcc GCC_APPS_CLK_SRC>;
+ };
+
+ cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ clocks = <&gcc GCC_APPS_CLK_SRC>;
+ };
+
+ cpu at 2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x2>;
+ clocks = <&gcc GCC_APPS_CLK_SRC>;
+ };
+
+ cpu at 3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x3>;
+ clocks = <&gcc GCC_APPS_CLK_SRC>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "simple-bus";
+
+ intc: interrupt-controller at b000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x0b000000 0x1000>,
+ <0x0b002000 0x1000>;
+ };
+
+ gcc: clock-controller at 1800000 {
+ compatible = "qcom,gcc-ipq4019";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ reg = <0x1800000 0x60000>;
+ };
+
+ tlmm: pinctrl at 0x01000000 {
+ compatible = "qcom,ipq4019-pinctrl";
+ reg = <0x01000000 0x300000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 208 0>;
+ };
+
+ serial at 78af000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x78af000 0x200>;
+ interrupts = <0 107 0>;
+ status = "disabled";
+ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ };
+
+ serial at 78b0000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x78b0000 0x200>;
+ interrupts = <0 108 0>;
+ status = "disabled";
+ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ };
+ };
+};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
WARNING: multiple messages have this Message-ID (diff)
From: Matthew McClintock <mmcclint@codeaurora.org>
To: Andy Gross <agross@codeaurora.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: Matthew McClintock <mmcclint@codeaurora.org>,
linux-kernel@vger.kernel.org,
qca-upstream.external@qca.qualcomm.com,
Varadarajan Narayanan <varada@codeaurora.org>
Subject: [PATCH 4/5] qcom: ipq4019: Add basic board/dts support for IPQ4019 SoC
Date: Thu, 5 Nov 2015 16:07:55 -0600 [thread overview]
Message-ID: <1446761276-9111-5-git-send-email-mmcclint@codeaurora.org> (raw)
In-Reply-To: <1446761276-9111-1-git-send-email-mmcclint@codeaurora.org>
Add initial dts files and SoC support for IPQ4019
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 108 ++++++++++++++++++++++++++++++++++++
1 file changed, 108 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-ipq4019.dtsi
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
new file mode 100644
index 0000000..157a9ca
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -0,0 +1,108 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "skeleton.dtsi"
+#include <dt-bindings/reset/qcom,gcc-ipq4019.h>
+#include <dt-bindings/clock/qcom,gcc-ipq4019.h>
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ4019";
+ compatible = "qcom,ipq4019";
+ interrupt-parent = <&intc>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ clocks = <&gcc GCC_APPS_CLK_SRC>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ clocks = <&gcc GCC_APPS_CLK_SRC>;
+ };
+
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x2>;
+ clocks = <&gcc GCC_APPS_CLK_SRC>;
+ };
+
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x3>;
+ clocks = <&gcc GCC_APPS_CLK_SRC>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "simple-bus";
+
+ intc: interrupt-controller@b000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x0b000000 0x1000>,
+ <0x0b002000 0x1000>;
+ };
+
+ gcc: clock-controller@1800000 {
+ compatible = "qcom,gcc-ipq4019";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ reg = <0x1800000 0x60000>;
+ };
+
+ tlmm: pinctrl@0x01000000 {
+ compatible = "qcom,ipq4019-pinctrl";
+ reg = <0x01000000 0x300000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 208 0>;
+ };
+
+ serial@78af000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x78af000 0x200>;
+ interrupts = <0 107 0>;
+ status = "disabled";
+ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ };
+
+ serial@78b0000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x78b0000 0x200>;
+ interrupts = <0 108 0>;
+ status = "disabled";
+ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ };
+ };
+};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2015-11-05 22:07 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-05 22:07 [PATCH 0/5] arm: qcom: Add support for IPQ8014 family of SoCs Matthew McClintock
2015-11-05 22:07 ` [PATCH 1/5] pinctrl: qcom: ipq4019: Add IPQ4019 pinctrl support Matthew McClintock
2015-11-06 2:34 ` Rob Herring
2015-11-06 3:24 ` Matthew McClintock
2015-11-05 22:07 ` [PATCH 2/5] clk: qcom: Add IPQ4019 Global Clock Controller support Matthew McClintock
2015-11-05 23:32 ` [PATCH] clk: qcom: fix platform_no_drv_owner.cocci warnings kbuild test robot
2015-11-05 23:32 ` kbuild test robot
2015-11-05 23:32 ` [PATCH 2/5] clk: qcom: Add IPQ4019 Global Clock Controller support kbuild test robot
2015-11-05 23:32 ` kbuild test robot
2015-11-06 1:15 ` Stephen Boyd
2015-11-05 22:07 ` [PATCH 3/5] ARM: qcom: add IPQ4019 compatible match Matthew McClintock
2015-11-05 22:07 ` Matthew McClintock [this message]
2015-11-05 22:07 ` [PATCH 4/5] qcom: ipq4019: Add basic board/dts support for IPQ4019 SoC Matthew McClintock
2015-11-05 22:07 ` Matthew McClintock
2015-11-05 22:07 ` [PATCH 5/5] dts: ipq4019: Add support for IPQ4019 DK01 board Matthew McClintock
2015-11-05 22:07 ` Matthew McClintock
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1446761276-9111-5-git-send-email-mmcclint@codeaurora.org \
--to=mmcclint@codeaurora.org \
--cc=agross@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=qca-upstream.external@qca.qualcomm.com \
--cc=varada@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.