From: jonmason@broadcom.com (Jon Mason)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] ARM: dts: NSP: Add I2C support to the DT
Date: Tue, 17 Nov 2015 14:55:27 -0500 [thread overview]
Message-ID: <1447790127-27237-3-git-send-email-jonmason@broadcom.com> (raw)
In-Reply-To: <1447790127-27237-1-git-send-email-jonmason@broadcom.com>
Add I2C support to the Broadcom Northstar Plus Device Tree. Since no
driver changes are needed to enable this hardware, only the device tree
changes are required to make this functional.
Signed-off-by: Jon Mason <jonmason@broadcom.com>
---
arch/arm/boot/dts/bcm-nsp.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 7335a74..b74438c 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -217,5 +217,14 @@
brcm,nand-has-wp;
};
+
+ i2c0: i2c at 38000 {
+ compatible = "brcm,iproc-i2c";
+ reg = <0x38000 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
+ clock-frequency = <100000>;
+ };
};
};
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Jon Mason <jonmason@broadcom.com>
To: Florian Fainelli <f.fainelli@gmail.com>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Russell King <linux@arm.linux.org.uk>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
bcm-kernel-feedback-list@broadcom.com
Subject: [PATCH 2/2] ARM: dts: NSP: Add I2C support to the DT
Date: Tue, 17 Nov 2015 14:55:27 -0500 [thread overview]
Message-ID: <1447790127-27237-3-git-send-email-jonmason@broadcom.com> (raw)
In-Reply-To: <1447790127-27237-1-git-send-email-jonmason@broadcom.com>
Add I2C support to the Broadcom Northstar Plus Device Tree. Since no
driver changes are needed to enable this hardware, only the device tree
changes are required to make this functional.
Signed-off-by: Jon Mason <jonmason@broadcom.com>
---
arch/arm/boot/dts/bcm-nsp.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 7335a74..b74438c 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -217,5 +217,14 @@
brcm,nand-has-wp;
};
+
+ i2c0: i2c@38000 {
+ compatible = "brcm,iproc-i2c";
+ reg = <0x38000 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
+ clock-frequency = <100000>;
+ };
};
};
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Jon Mason <jonmason@broadcom.com>
To: Florian Fainelli <f.fainelli@gmail.com>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
"Ian Campbell" <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Russell King <linux@arm.linux.org.uk>
Cc: <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
<bcm-kernel-feedback-list@broadcom.com>
Subject: [PATCH 2/2] ARM: dts: NSP: Add I2C support to the DT
Date: Tue, 17 Nov 2015 14:55:27 -0500 [thread overview]
Message-ID: <1447790127-27237-3-git-send-email-jonmason@broadcom.com> (raw)
In-Reply-To: <1447790127-27237-1-git-send-email-jonmason@broadcom.com>
Add I2C support to the Broadcom Northstar Plus Device Tree. Since no
driver changes are needed to enable this hardware, only the device tree
changes are required to make this functional.
Signed-off-by: Jon Mason <jonmason@broadcom.com>
---
arch/arm/boot/dts/bcm-nsp.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 7335a74..b74438c 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -217,5 +217,14 @@
brcm,nand-has-wp;
};
+
+ i2c0: i2c@38000 {
+ compatible = "brcm,iproc-i2c";
+ reg = <0x38000 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
+ clock-frequency = <100000>;
+ };
};
};
--
1.9.1
next prev parent reply other threads:[~2015-11-17 19:55 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-17 19:55 [PATCH 0/2] ARM: dts: NSP: clean-ups and I2C support Jon Mason
2015-11-17 19:55 ` Jon Mason
2015-11-17 19:55 ` Jon Mason
2015-11-17 19:55 ` [PATCH 1/2] ARM: dts: NSP: Device Tree clean-ups Jon Mason
2015-11-17 19:55 ` Jon Mason
2015-11-17 19:55 ` Jon Mason
2015-11-17 19:55 ` Jon Mason [this message]
2015-11-17 19:55 ` [PATCH 2/2] ARM: dts: NSP: Add I2C support to the DT Jon Mason
2015-11-17 19:55 ` Jon Mason
2015-11-19 23:36 ` [PATCH 0/2] ARM: dts: NSP: clean-ups and I2C support Florian Fainelli
2015-11-19 23:36 ` Florian Fainelli
2015-11-19 23:36 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447790127-27237-3-git-send-email-jonmason@broadcom.com \
--to=jonmason@broadcom.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.