* [PATCH V9 3/7] libxl: add pvusb API
2015-11-24 8:35 [PATCH V9 0/7] xen pvusb toolstack work Chunyan Liu
2015-11-24 8:35 ` [PATCH V9 1/7] libxl: export some functions for pvusb use Chunyan Liu
2015-11-24 8:35 ` [PATCH V9 2/7] libxl_utils: add internal function to read sysfs file contents Chunyan Liu
@ 2015-11-24 8:35 ` Chunyan Liu
2015-11-24 8:35 ` [PATCH V9 4/7] libxl: add libxl_device_usb_assignable_list API Chunyan Liu
` (4 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Chunyan Liu @ 2015-11-24 8:35 UTC (permalink / raw)
To: xen-devel
Cc: jgross, wei.liu2, ian.campbell, george.dunlap, Ian.Jackson,
Chunyan Liu, jfehlig, Simon Cao
Add pvusb APIs, including:
- attach/detach (create/destroy) virtual usb controller.
- attach/detach usb device
- list usb controller and usb devices
- some other helper functions
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Simon Cao <caobosimon@gmail.com>
---
changes:
- update DEFINE_DEVICE_REMOVE instead of creating a new
DEFINE_DEVICE_REMOVE_EXT
- use libxl__xs_read_checked instead of libxl__xs_read
- update local READ_SUBPATH(_INT) macros to include more common codes
- save drvpath before unbind
- get_assigned_devices: call libxl__device_usb_list_for_ctrl instead of
doing all things from scratch
- usb_interface_xenstore_encode: use special char to avoid confusion
- usb readdir_r instead of readdir
- check syscall errno
- remove usbinfo definition
- address other comments except:
libxl__device_usb_add/remove and do_usb_add/remove, in previous discussion,
we'd like to get usbctrlinfo once and pass that as parameter to
do_usb_add/remove. However, during update, found that in adding usb
process, still need to try twice to get usbctrlinfo. (Before set_default,
if usbctrl doesn't exist it doesn't doing getting usbctrlinfo actually;
after set_default, needs to get usbctrlinfo then). So, finally, just
change codes to make adding/removing process symmetrical by getting
usbctrlinfo twice.
tools/libxl/Makefile | 2 +-
tools/libxl/libxl.c | 50 +-
tools/libxl/libxl.h | 74 ++
tools/libxl/libxl_device.c | 5 +-
tools/libxl/libxl_internal.h | 18 +
tools/libxl/libxl_osdeps.h | 13 +
tools/libxl/libxl_pvusb.c | 1523 ++++++++++++++++++++++++++++++++++
tools/libxl/libxl_types.idl | 46 +
tools/libxl/libxl_types_internal.idl | 1 +
tools/libxl/libxl_utils.c | 18 +
tools/libxl/libxl_utils.h | 5 +
11 files changed, 1752 insertions(+), 3 deletions(-)
create mode 100644 tools/libxl/libxl_pvusb.c
diff --git a/tools/libxl/Makefile b/tools/libxl/Makefile
index c5ecec1..ef9ccd3 100644
--- a/tools/libxl/Makefile
+++ b/tools/libxl/Makefile
@@ -103,7 +103,7 @@ LIBXL_OBJS = flexarray.o libxl.o libxl_create.o libxl_dm.o libxl_pci.o \
libxl_stream_read.o libxl_stream_write.o \
libxl_save_callout.o _libxl_save_msgs_callout.o \
libxl_qmp.o libxl_event.o libxl_fork.o \
- libxl_dom_suspend.o $(LIBXL_OBJS-y)
+ libxl_dom_suspend.o libxl_pvusb.o $(LIBXL_OBJS-y)
LIBXL_OBJS += libxl_genid.o
LIBXL_OBJS += _libxl_types.o libxl_flask.o _libxl_types_internal.o
diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
index afbff66..99e446a 100644
--- a/tools/libxl/libxl.c
+++ b/tools/libxl/libxl.c
@@ -4144,6 +4144,36 @@ out:
return rc;
}
+static void libxl__initiate_device_disk_remove(libxl__egc *egc,
+ libxl__ao_device *aodev)
+{
+ return libxl__initiate_device_remove(egc, aodev);
+}
+
+static void libxl__initiate_device_nic_remove(libxl__egc *egc,
+ libxl__ao_device *aodev)
+{
+ return libxl__initiate_device_remove(egc, aodev);
+}
+
+static void libxl__initiate_device_vtpm_remove(libxl__egc *egc,
+ libxl__ao_device *aodev)
+{
+ return libxl__initiate_device_remove(egc, aodev);
+}
+
+static void libxl__initiate_device_vkb_remove(libxl__egc *egc,
+ libxl__ao_device *aodev)
+{
+ return libxl__initiate_device_remove(egc, aodev);
+}
+
+static void libxl__initiate_device_vfb_remove(libxl__egc *egc,
+ libxl__ao_device *aodev)
+{
+ return libxl__initiate_device_remove(egc, aodev);
+}
+
/******************************************************************************/
/* Macro for defining device remove/destroy functions in a compact way */
@@ -4158,6 +4188,8 @@ out:
* libxl_device_vkb_destroy
* libxl_device_vfb_remove
* libxl_device_vfb_destroy
+ * libxl_device_usbctrl_remove
+ * libxl_device_usbctrl_destroy
*/
#define DEFINE_DEVICE_REMOVE(type, removedestroy, f) \
int libxl_device_##type##_##removedestroy(libxl_ctx *ctx, \
@@ -4179,7 +4211,7 @@ out:
aodev->dev = device; \
aodev->callback = device_addrm_aocomplete; \
aodev->force = f; \
- libxl__initiate_device_remove(egc, aodev); \
+ libxl__initiate_device_##type##_remove(egc, aodev); \
\
out: \
if (rc) return AO_CREATE_FAIL(rc); \
@@ -4209,6 +4241,10 @@ DEFINE_DEVICE_REMOVE(vfb, destroy, 1)
DEFINE_DEVICE_REMOVE(vtpm, remove, 0)
DEFINE_DEVICE_REMOVE(vtpm, destroy, 1)
+/* usbctrl */
+DEFINE_DEVICE_REMOVE(usbctrl, remove, 0)
+DEFINE_DEVICE_REMOVE(usbctrl, destroy, 1)
+
/* channel/console hotunplug is not implemented. There are 2 possibilities:
* 1. add support for secondary consoles to xenconsoled
* 2. dynamically add/remove qemu chardevs via qmp messages. */
@@ -4222,6 +4258,8 @@ DEFINE_DEVICE_REMOVE(vtpm, destroy, 1)
* libxl_device_disk_add
* libxl_device_nic_add
* libxl_device_vtpm_add
+ * libxl_device_usbctrl_add
+ * libxl_device_usb_add
*/
#define DEFINE_DEVICE_ADD(type) \
@@ -4253,6 +4291,12 @@ DEFINE_DEVICE_ADD(nic)
/* vtpm */
DEFINE_DEVICE_ADD(vtpm)
+/* usbctrl */
+DEFINE_DEVICE_ADD(usbctrl)
+
+/* usb */
+DEFINE_DEVICE_ADD(usb)
+
#undef DEFINE_DEVICE_ADD
/******************************************************************************/
@@ -6794,6 +6838,10 @@ int libxl_retrieve_domain_configuration(libxl_ctx *ctx, uint32_t domid,
MERGE(pci, pcidevs, COMPARE_PCI, {});
+ MERGE(usbctrl, usbctrls, COMPARE_USBCTRL, {});
+
+ MERGE(usb, usbs, COMPARE_USB, {});
+
/* Take care of removable device. We maintain invariant in the
* insert / remove operation so that:
* 1. if xenstore is "empty" while JSON is not, the result
diff --git a/tools/libxl/libxl.h b/tools/libxl/libxl.h
index 615b1de..594e23d 100644
--- a/tools/libxl/libxl.h
+++ b/tools/libxl/libxl.h
@@ -123,6 +123,12 @@
#define LIBXL_HAVE_DOMAIN_NODEAFFINITY 1
/*
+ * LIBXL_HAVE_PVUSB indicates functions for plugging in USB devices
+ * through pvusb -- both hotplug and at domain creation time..
+ */
+#define LIBXL_HAVE_PVUSB 1
+
+/*
* LIBXL_HAVE_BUILDINFO_HVM_VENDOR_DEVICE indicates that the
* libxl_vendor_device field is present in the hvm sections of
* libxl_domain_build_info. This field tells libxl which
@@ -1411,6 +1417,74 @@ int libxl_cdrom_insert(libxl_ctx *ctx, uint32_t domid, libxl_device_disk *disk,
const libxl_asyncop_how *ao_how)
LIBXL_EXTERNAL_CALLERS_ONLY;
+/*
+ * USB
+ *
+ * For each device removed or added, one of these protocols is available:
+ * - PV (i.e., PVUSB)
+ * - DEVICEMODEL (i.e, qemu)
+ *
+ * PV is available for either PV or HVM domains. DEVICEMODEL is only
+ * available for HVM domains. The caller can additionally specify
+ * "AUTO", in which case the library will try to determine the best
+ * protocol automatically.
+ *
+ * At the moment, the only protocol implemented is PV.
+ *
+ * One can add/remove USB controllers to/from guest, and attach/detach USB
+ * devices to/from USB controllers.
+ *
+ * To add USB controllers and USB devices, one can adding USB controllers
+ * first and then attaching USB devices to some USB controller, or adding
+ * USB devices to guest directly, it will automatically create a USB
+ * controller for USB devices to attach.
+ *
+ * To remove USB controllers or USB devices, one can remove USB devices
+ * under USB controller one by one and then remove USB controller, or
+ * remove USB controller directly, it will remove all USB devices under
+ * it automatically.
+ *
+ */
+/* USB Controllers*/
+int libxl_device_usbctrl_add(libxl_ctx *ctx, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ const libxl_asyncop_how *ao_how)
+ LIBXL_EXTERNAL_CALLERS_ONLY;
+
+int libxl_device_usbctrl_remove(libxl_ctx *ctx, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ const libxl_asyncop_how *ao_how)
+ LIBXL_EXTERNAL_CALLERS_ONLY;
+
+int libxl_device_usbctrl_destroy(libxl_ctx *ctx, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ const libxl_asyncop_how *ao_how)
+ LIBXL_EXTERNAL_CALLERS_ONLY;
+
+libxl_device_usbctrl *libxl_device_usbctrl_list(libxl_ctx *ctx,
+ uint32_t domid, int *num);
+
+void libxl_device_usbctrl_list_free(libxl_device_usbctrl *list, int nr);
+
+
+int libxl_device_usbctrl_getinfo(libxl_ctx *ctx, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ libxl_usbctrlinfo *usbctrlinfo);
+
+/* USB Devices */
+int libxl_device_usb_add(libxl_ctx *ctx, uint32_t domid, libxl_device_usb *usb,
+ const libxl_asyncop_how *ao_how)
+ LIBXL_EXTERNAL_CALLERS_ONLY;
+
+int libxl_device_usb_remove(libxl_ctx *ctx, uint32_t domid, libxl_device_usb *usb,
+ const libxl_asyncop_how *ao_how)
+ LIBXL_EXTERNAL_CALLERS_ONLY;
+
+libxl_device_usb *
+libxl_device_usb_list(libxl_ctx *ctx, uint32_t domid, int *num);
+
+void libxl_device_usb_list_free(libxl_device_usb *list, int nr);
+
/* Network Interfaces */
int libxl_device_nic_add(libxl_ctx *ctx, uint32_t domid, libxl_device_nic *nic,
const libxl_asyncop_how *ao_how)
diff --git a/tools/libxl/libxl_device.c b/tools/libxl/libxl_device.c
index 8bb5e93..6715c16 100644
--- a/tools/libxl/libxl_device.c
+++ b/tools/libxl/libxl_device.c
@@ -676,7 +676,10 @@ void libxl__devices_destroy(libxl__egc *egc, libxl__devices_remove_state *drs)
aodev->action = LIBXL__DEVICE_ACTION_REMOVE;
aodev->dev = dev;
aodev->force = drs->force;
- libxl__initiate_device_remove(egc, aodev);
+ if (dev->backend_kind == LIBXL__DEVICE_KIND_VUSB)
+ libxl__initiate_device_usbctrl_remove(egc, aodev);
+ else
+ libxl__initiate_device_remove(egc, aodev);
}
}
}
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 7aff237..b2c4173 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -2569,6 +2569,14 @@ _hidden void libxl__device_vtpm_add(libxl__egc *egc, uint32_t domid,
libxl_device_vtpm *vtpm,
libxl__ao_device *aodev);
+_hidden void libxl__device_usbctrl_add(libxl__egc *egc, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ libxl__ao_device *aodev);
+
+_hidden void libxl__device_usb_add(libxl__egc *egc, uint32_t domid,
+ libxl_device_usb *usb,
+ libxl__ao_device *aodev);
+
/* Internal function to connect a vkb device */
_hidden int libxl__device_vkb_add(libxl__gc *gc, uint32_t domid,
libxl_device_vkb *vkb);
@@ -2601,6 +2609,13 @@ _hidden void libxl__wait_device_connection(libxl__egc*,
_hidden void libxl__initiate_device_remove(libxl__egc *egc,
libxl__ao_device *aodev);
+_hidden int libxl__device_from_usbctrl(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ libxl__device *device);
+
+_hidden void libxl__initiate_device_usbctrl_remove(libxl__egc *egc,
+ libxl__ao_device *aodev);
+
/*
* libxl__get_hotplug_script_info returns the args and env that should
* be passed to the hotplug script for the requested device.
@@ -3958,6 +3973,9 @@ static inline void libxl__update_config_vtpm(libxl__gc *gc,
#define COMPARE_PCI(a, b) ((a)->func == (b)->func && \
(a)->bus == (b)->bus && \
(a)->dev == (b)->dev)
+#define COMPARE_USB(a, b) ((a)->ctrl == (b)->ctrl && \
+ (a)->port == (b)->port)
+#define COMPARE_USBCTRL(a, b) ((a)->devid == (b)->devid)
/* DEVICE_ADD
*
diff --git a/tools/libxl/libxl_osdeps.h b/tools/libxl/libxl_osdeps.h
index d9661c9..802c762 100644
--- a/tools/libxl/libxl_osdeps.h
+++ b/tools/libxl/libxl_osdeps.h
@@ -24,6 +24,8 @@
#define _GNU_SOURCE
#if defined(__NetBSD__)
+#define SYSFS_USB_DEV "/sys/bus/usb/devices"
+#define SYSFS_USBBACK_DRIVER "/kern/xen/usb"
#define SYSFS_PCI_DEV "/sys/bus/pci/devices"
#define SYSFS_PCIBACK_DRIVER "/kern/xen/pci"
#define NETBACK_NIC_NAME "xvif%ui%d"
@@ -31,6 +33,8 @@
#elif defined(__OpenBSD__)
#include <util.h>
#elif defined(__linux__)
+#define SYSFS_USB_DEV "/sys/bus/usb/devices"
+#define SYSFS_USBBACK_DRIVER "/sys/bus/usb/drivers/usbback"
#define SYSFS_PCI_DEV "/sys/bus/pci/devices"
#define SYSFS_PCIBACK_DRIVER "/sys/bus/pci/drivers/pciback"
#define NETBACK_NIC_NAME "vif%u.%d"
@@ -38,6 +42,8 @@
#elif defined(__sun__)
#include <stropts.h>
#elif defined(__FreeBSD__)
+#define SYSFS_USB_DEV "/dev/null"
+#define SYSFS_USBBACK_DRIVER "/dev/null"
#define SYSFS_PCI_DEV "/dev/null"
#define SYSFS_PCIBACK_DRIVER "/dev/null"
#define NETBACK_NIC_NAME "xnb%u.%d"
@@ -45,6 +51,13 @@
#include <sys/endian.h>
#endif
+#ifndef SYSFS_USBBACK_DRIVER
+#error define SYSFS_USBBACK_DRIVER for your platform
+#endif
+#ifndef SYSFS_USB_DEV
+#error define SYSFS_USB_DEV for your platform
+#endif
+
#ifndef SYSFS_PCIBACK_DRIVER
#error define SYSFS_PCIBACK_DRIVER for your platform
#endif
diff --git a/tools/libxl/libxl_pvusb.c b/tools/libxl/libxl_pvusb.c
new file mode 100644
index 0000000..96b41e6
--- /dev/null
+++ b/tools/libxl/libxl_pvusb.c
@@ -0,0 +1,1523 @@
+/*
+ * Copyright (C) 2015 SUSE LINUX Products GmbH, Nuernberg, Germany.
+ * Author Chunyan Liu <cyliu@suse.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published
+ * by the Free Software Foundation; version 2.1 only. with the special
+ * exception on linking described in file LICENSE.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ */
+
+#include "libxl_osdeps.h" /* must come before any other headers */
+
+#include "libxl_internal.h"
+#include <inttypes.h>
+
+#define USBBACK_INFO_PATH "/libxl/usbback"
+
+#define USBHUB_CLASS_CODE 9
+
+static int libxl__device_usbctrl_setdefault(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbctrl *usbctrl)
+{
+ int rc;
+ libxl_domain_type domtype = libxl__domain_type(gc, domid);
+
+ if (!usbctrl->version)
+ usbctrl->version = 2;
+
+ if (!usbctrl->ports)
+ usbctrl->ports = 8;
+
+ if (usbctrl->type == LIBXL_USBCTRL_TYPE_AUTO) {
+ if (domtype == LIBXL_DOMAIN_TYPE_PV) {
+ usbctrl->type = LIBXL_USBCTRL_TYPE_PV;
+ } else if (domtype == LIBXL_DOMAIN_TYPE_HVM) {
+ /* FIXME: See if we can detect PV frontend */
+ usbctrl->type = LIBXL_USBCTRL_TYPE_DEVICEMODEL;
+ }
+ }
+
+ rc = libxl__resolve_domid(gc, usbctrl->backend_domname,
+ &usbctrl->backend_domid);
+ return rc;
+}
+
+int libxl__device_from_usbctrl(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ libxl__device *device)
+{
+ device->backend_devid = usbctrl->devid;
+ device->backend_domid = usbctrl->backend_domid;
+ device->backend_kind = LIBXL__DEVICE_KIND_VUSB;
+ device->devid = usbctrl->devid;
+ device->domid = domid;
+ device->kind = LIBXL__DEVICE_KIND_VUSB;
+
+ return 0;
+}
+
+/* Add usbctrl information to xenstore.
+ *
+ * Adding a usb controller will add a new 'vusb' device in xenstore, and
+ * add corresponding frontend, backend information to it. According to
+ * "update_json", decide wether to update json config file.
+ */
+static int libxl__device_usbctrl_add_xenstore(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ bool update_json)
+{
+ libxl__device *device;
+ flexarray_t *front;
+ flexarray_t *back;
+ xs_transaction_t t = XBT_NULL;
+ int i, rc;
+ libxl_domain_config d_config;
+ libxl_device_usbctrl usbctrl_saved;
+ libxl__domain_userdata_lock *lock = NULL;
+
+ libxl_domain_config_init(&d_config);
+ libxl_device_usbctrl_init(&usbctrl_saved);
+ libxl_device_usbctrl_copy(CTX, &usbctrl_saved, usbctrl);
+
+ GCNEW(device);
+ rc = libxl__device_from_usbctrl(gc, domid, usbctrl, device);
+ if (rc) goto out;
+
+ front = flexarray_make(gc, 4, 1);
+ back = flexarray_make(gc, 12, 1);
+
+ flexarray_append_pair(back, "frontend-id", GCSPRINTF("%d", domid));
+ flexarray_append_pair(back, "online", "1");
+ flexarray_append_pair(back, "state",
+ GCSPRINTF("%d", XenbusStateInitialising));
+ flexarray_append_pair(back, "type",
+ (char *)libxl_usbctrl_type_to_string(usbctrl->type));
+ flexarray_append_pair(back, "usb-ver", GCSPRINTF("%d", usbctrl->version));
+ flexarray_append_pair(back, "num-ports", GCSPRINTF("%d", usbctrl->ports));
+ flexarray_append_pair(back, "port", "");
+ for (i = 0; i < usbctrl->ports; i++)
+ flexarray_append_pair(back, GCSPRINTF("port/%d", i + 1), "");
+
+ flexarray_append_pair(front, "backend-id",
+ GCSPRINTF("%d", usbctrl->backend_domid));
+ flexarray_append_pair(front, "state",
+ GCSPRINTF("%d", XenbusStateInitialising));
+
+ if (update_json) {
+ lock = libxl__lock_domain_userdata(gc, domid);
+ if (!lock) {
+ rc = ERROR_LOCK_FAIL;
+ goto out;
+ }
+
+ rc = libxl__get_domain_configuration(gc, domid, &d_config);
+ if (rc) goto out;
+
+ DEVICE_ADD(usbctrl, usbctrls, domid, &usbctrl_saved,
+ COMPARE_USBCTRL, &d_config);
+ }
+
+ for (;;) {
+ rc = libxl__xs_transaction_start(gc, &t);
+ if (rc) goto out;
+
+ rc = libxl__device_exists(gc, t, device);
+ if (rc < 0) goto out;
+ if (rc == 1) {
+ /* already exists in xenstore */
+ LOG(ERROR, "device already exists in xenstore");
+ rc = ERROR_DEVICE_EXISTS;
+ goto out;
+ }
+
+ if (update_json) {
+ rc = libxl__set_domain_configuration(gc, domid, &d_config);
+ if (rc) goto out;
+ }
+
+ libxl__device_generic_add(gc, t, device,
+ libxl__xs_kvs_of_flexarray(gc, back, back->count),
+ libxl__xs_kvs_of_flexarray(gc, front, front->count),
+ NULL);
+
+ rc = libxl__xs_transaction_commit(gc, &t);
+ if (!rc) break;
+ if (rc < 0) goto out;
+ }
+
+out:
+ libxl__xs_transaction_abort(gc, &t);
+ if (lock) libxl__unlock_domain_userdata(lock);
+ libxl_device_usbctrl_dispose(&usbctrl_saved);
+ libxl_domain_config_dispose(&d_config);
+ return rc;
+}
+
+/* AO operation to add a usb controller.
+ *
+ * Generally, it does:
+ * 1) fill in necessary usb controler information with default value
+ * 2) write usb controller frontend/backend info to xenstore, update json
+ * config file if necessary.
+ * 3) wait for device connection. PVUSB frontend and backend driver will
+ * probe xenstore paths and build connection between frontend and backend.
+ *
+ * Before calling this function, aodev should be properly filled:
+ * aodev->ao, aodev->callback, aodev->update_json, ...
+ */
+void libxl__device_usbctrl_add(libxl__egc *egc, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ libxl__ao_device *aodev)
+{
+ STATE_AO_GC(aodev->ao);
+ libxl__device *device;
+ int rc;
+
+ rc = libxl__device_usbctrl_setdefault(gc, domid, usbctrl);
+ if (rc < 0) goto out;
+
+ if (usbctrl->devid == -1) {
+ usbctrl->devid = libxl__device_nextid(gc, domid, "vusb");
+ if (usbctrl->devid < 0) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ }
+
+ if (usbctrl->type != LIBXL_USBCTRL_TYPE_PV) {
+ LOG(ERROR, "Unsupported USB controller type");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = libxl__device_usbctrl_add_xenstore(gc, domid, usbctrl,
+ aodev->update_json);
+ if (rc) goto out;
+
+ GCNEW(device);
+ rc = libxl__device_from_usbctrl(gc, domid, usbctrl, device);
+ if (rc) goto out;
+
+ aodev->dev = device;
+ aodev->action = LIBXL__DEVICE_ACTION_ADD;
+ libxl__wait_device_connection(egc, aodev);
+ return;
+
+out:
+ aodev->rc = rc;
+ aodev->callback(egc, aodev);
+ return;
+}
+
+static int
+libxl__device_usb_list_for_usbctrl(libxl__gc *gc, uint32_t domid,
+ libxl_devid usbctrl,
+ libxl_device_usb **usbs, int *num);
+
+static int
+libxl__device_usb_remove(libxl__gc *gc, uint32_t domid, libxl_device_usb *usb);
+
+/* AO function to remove a usb controller.
+ *
+ * Generally, it does:
+ * 1) check if the usb controller exists or not
+ * 2) remove all usb devices under controller
+ * 3) remove usb controller information from xenstore
+ *
+ * Before calling this function, aodev should be properly filled:
+ * aodev->ao, aodev->dev, aodev->callback, ...
+ */
+void libxl__initiate_device_usbctrl_remove(libxl__egc *egc,
+ libxl__ao_device *aodev)
+{
+ STATE_AO_GC(aodev->ao);
+ libxl_ctx *ctx = CTX;
+ libxl_device_usb *usbs = NULL;
+ int numusb = 0;
+ int i, rc;
+ uint32_t domid = ao->domid;
+ int usbctrl_devid = aodev->dev->devid;
+ libxl_device_usbctrl usbctrl;
+ libxl_usbctrlinfo usbctrlinfo;
+
+ libxl_device_usbctrl_init(&usbctrl);
+ libxl_usbctrlinfo_init(&usbctrlinfo);
+ usbctrl.devid = usbctrl_devid;
+
+ rc = libxl_device_usbctrl_getinfo(ctx, domid, &usbctrl, &usbctrlinfo);
+ if (rc) goto out;
+
+ if (usbctrlinfo.type != LIBXL_USBCTRL_TYPE_PV) {
+ LOG(ERROR, "Unsupported USB controller type");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ /* Remove usb devices first */
+ rc = libxl__device_usb_list_for_usbctrl(gc, domid, usbctrl_devid,
+ &usbs, &numusb);
+ if (rc) goto out;
+
+ for (i = 0; i < numusb; i++) {
+ if (libxl__device_usb_remove(gc, domid, &usbs[i])) {
+ LOG(ERROR, "libxl__device_usb_remove failed");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ }
+
+ libxl_device_usbctrl_dispose(&usbctrl);
+ libxl_usbctrlinfo_dispose(&usbctrlinfo);
+
+ /* Remove usbctrl */
+ return libxl__initiate_device_remove(egc, aodev);
+
+out:
+ libxl_device_usbctrl_dispose(&usbctrl);
+ libxl_usbctrlinfo_dispose(&usbctrlinfo);
+ aodev->rc = rc;
+ aodev->callback(egc, aodev);
+ return;
+}
+
+libxl_device_usbctrl *
+libxl_device_usbctrl_list(libxl_ctx *ctx, uint32_t domid, int *num)
+{
+ GC_INIT(ctx);
+ libxl_device_usbctrl *usbctrls = NULL;
+ char *path = NULL;
+ char **entry = NULL;
+ unsigned int nentries = 0;
+
+ *num = 0;
+
+ path = GCSPRINTF("%s/device/vusb",
+ libxl__xs_get_dompath(gc, domid));
+ entry = libxl__xs_directory(gc, XBT_NULL, path, &nentries);
+
+ if (entry && nentries) {
+ usbctrls = libxl__zalloc(NOGC, sizeof(*usbctrls) * nentries);
+ libxl_device_usbctrl *usbctrl;
+ libxl_device_usbctrl *end = usbctrls + nentries;
+ for (usbctrl = usbctrls;
+ usbctrl < end;
+ usbctrl++, entry++, (*num)++) {
+ const char *tmp, *be_path, *fe_path;
+ int ret;
+
+ libxl_device_usbctrl_init(usbctrl);
+ usbctrl->devid = atoi(*entry);
+
+#define READ_SUBPATH(path, subpath) ({ \
+ ret = libxl__xs_read_checked(gc, XBT_NULL, \
+ GCSPRINTF("%s/" subpath, path), \
+ &tmp); \
+ if (ret) goto out; \
+ (char *)tmp; \
+ })
+
+#define READ_SUBPATH_INT(path, subpath) ({ \
+ ret = libxl__xs_read_checked(gc, XBT_NULL, \
+ GCSPRINTF("%s/" subpath, path), \
+ &tmp); \
+ if (ret) goto out; \
+ tmp ? atoi(tmp) : -1; \
+ })
+
+ fe_path = GCSPRINTF("%s/%s", path, *entry);
+ be_path = READ_SUBPATH(fe_path, "backend");
+ usbctrl->backend_domid = READ_SUBPATH_INT(fe_path, "backend-id");
+ usbctrl->version = READ_SUBPATH_INT(be_path, "usb-ver");
+ usbctrl->ports = READ_SUBPATH_INT(be_path, "num-ports");
+ libxl_usbctrl_type_from_string(READ_SUBPATH(be_path, "type"),
+ &usbctrl->type);
+
+#undef READ_SUBPATH
+#undef READ_SUBPATH_INT
+ }
+ }
+
+ GC_FREE;
+ return usbctrls;
+
+out:
+ LOG(ERROR, "Unable to list USB Controllers");
+ libxl_device_usbctrl_list_free(usbctrls, *num);
+ GC_FREE;
+ *num = 0;
+ return NULL;
+}
+
+int libxl_device_usbctrl_getinfo(libxl_ctx *ctx, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ libxl_usbctrlinfo *usbctrlinfo)
+{
+ GC_INIT(ctx);
+ const char *dompath, *fe_path, *be_path, *tmp;
+ int rc;
+
+ usbctrlinfo->devid = usbctrl->devid;
+
+#define READ_SUBPATH(path, subpath) ({ \
+ rc = libxl__xs_read_checked(gc, XBT_NULL, \
+ GCSPRINTF("%s/" subpath, path), \
+ &tmp); \
+ if (rc) goto out; \
+ (char *)tmp; \
+ })
+
+#define READ_SUBPATH_INT(path, subpath) ({ \
+ rc = libxl__xs_read_checked(gc, XBT_NULL, \
+ GCSPRINTF("%s/" subpath, path), \
+ &tmp); \
+ if (rc) goto out; \
+ tmp ? atoi(tmp) : -1; \
+ })
+
+ dompath = libxl__xs_get_dompath(gc, domid);
+ fe_path = GCSPRINTF("%s/device/vusb/%d", dompath, usbctrl->devid);
+ be_path = READ_SUBPATH(fe_path, "backend");
+ usbctrlinfo->backend = libxl__strdup(NOGC, be_path);
+ usbctrlinfo->backend_id = READ_SUBPATH_INT(fe_path, "backend-id");
+ usbctrlinfo->state = READ_SUBPATH_INT(fe_path, "state");
+ usbctrlinfo->evtch = READ_SUBPATH_INT(fe_path, "event-channel");
+ usbctrlinfo->ref_urb = READ_SUBPATH_INT(fe_path, "urb-ring-ref");
+ usbctrlinfo->ref_conn = READ_SUBPATH_INT(fe_path, "urb-ring-ref");
+ tmp = READ_SUBPATH(be_path, "frontend");
+ usbctrlinfo->frontend = libxl__strdup(NOGC, tmp);
+ usbctrlinfo->frontend_id = READ_SUBPATH_INT(be_path, "frontend-id");
+ usbctrlinfo->ports = READ_SUBPATH_INT(be_path, "num-ports");
+ usbctrlinfo->version = READ_SUBPATH_INT(be_path, "usb-ver");;
+ tmp = READ_SUBPATH(be_path, "type");
+ libxl_usbctrl_type_from_string(tmp, &usbctrlinfo->type);
+
+#undef READ_SUBPATH
+#undef READ_SUBPATH_INT
+
+ rc = 0;
+
+out:
+ GC_FREE;
+ return rc;
+}
+
+int libxl_devid_to_device_usbctrl(libxl_ctx *ctx,
+ uint32_t domid,
+ int devid,
+ libxl_device_usbctrl *usbctrl)
+{
+ libxl_device_usbctrl *usbctrls;
+ int nb = 0;
+ int i, rc;
+
+ usbctrls = libxl_device_usbctrl_list(ctx, domid, &nb);
+ if (!usbctrls)
+ return ERROR_FAIL;
+
+ rc = ERROR_FAIL;
+ for (i = 0; i < nb; i++) {
+ if (devid == usbctrls[i].devid) {
+ libxl_device_usbctrl_copy(ctx, usbctrl, &usbctrls[i]);
+ rc = 0;
+ break;
+ }
+ }
+
+ libxl_device_usbctrl_list_free(usbctrls, nb);
+ return rc;
+}
+
+static char *usb_busaddr_to_busid(libxl__gc *gc, int bus, int addr)
+{
+ DIR *dir;
+ char *busid = NULL;
+
+ /* invalid hostbus or hostaddr */
+ if (bus < 1 || addr < 1)
+ return NULL;
+
+ dir = opendir(SYSFS_USB_DEV);
+ if (!dir) {
+ LOGE(ERROR, "opendir failed: '%s'", SYSFS_USB_DEV);
+ return NULL;
+ }
+
+ size_t need = offsetof(struct dirent, d_name) +
+ pathconf(SYSFS_USB_DEV, _PC_NAME_MAX) + 1;
+ struct dirent *de_buf = libxl__zalloc(gc, need);
+ struct dirent *de;
+
+ for (;;) {
+ char *filename;
+ void *buf;
+ int busnum = -1;
+ int devnum = -1;
+
+ int r = readdir_r(dir, de_buf, &de);
+ if (r) {
+ LOGE(ERROR, "failed to readdir %s", SYSFS_USB_DEV);
+ break;
+ }
+ if (!de)
+ break;
+
+ if (!strcmp(de->d_name, ".") ||
+ !strcmp(de->d_name, ".."))
+ continue;
+
+ filename = GCSPRINTF(SYSFS_USB_DEV"/%s/devnum", de->d_name);
+ if (!libxl__read_sysfs_file_contents(gc, filename, &buf, NULL))
+ devnum = atoi(buf);
+
+ filename = GCSPRINTF(SYSFS_USB_DEV"/%s/busnum", de->d_name);
+ if (!libxl__read_sysfs_file_contents(gc, filename, &buf, NULL))
+ busnum = atoi(buf);
+
+ if (bus == busnum && addr == devnum) {
+ busid = libxl__strdup(gc, de->d_name);
+ break;
+ }
+ }
+
+ closedir(dir);
+ return busid;
+}
+
+static int usb_busaddr_from_busid(libxl__gc *gc, const char *busid,
+ uint8_t *bus, uint8_t *addr)
+{
+ char *filename;
+ void *buf;
+
+ filename = GCSPRINTF(SYSFS_USB_DEV"/%s/busnum", busid);
+ if (!libxl__read_sysfs_file_contents(gc, filename, &buf, NULL))
+ *bus = atoi((char *)buf);
+ else
+ return ERROR_FAIL;
+
+ filename = GCSPRINTF(SYSFS_USB_DEV"/%s/devnum", busid);
+ if (!libxl__read_sysfs_file_contents(gc, filename, &buf, NULL))
+ *addr = atoi((char *)buf);
+ else
+ return ERROR_FAIL;
+
+ return 0;
+}
+
+static int get_assigned_devices(libxl__gc *gc,
+ libxl_device_usb **list, int *num)
+{
+ char **domlist;
+ unsigned int ndom = 0;
+ int i, j, k;
+ int rc;
+
+ *list = NULL;
+ *num = 0;
+
+ domlist = libxl__xs_directory(gc, XBT_NULL, "/local/domain", &ndom);
+ for (i = 0; i < ndom; i++) {
+ char *path;
+ char **usbctrls;
+ unsigned int nc = 0;
+ uint32_t domid = atoi(domlist[i]);
+
+ path = GCSPRINTF("%s/device/vusb", libxl__xs_get_dompath(gc, domid));
+ usbctrls = libxl__xs_directory(gc, XBT_NULL, path, &nc);
+
+ for (j = 0; j < nc; j++) {
+ libxl_device_usb *tmp = NULL;
+ int nd = 0;
+
+ rc = libxl__device_usb_list_for_usbctrl(gc, domid,
+ atoi(usbctrls[j]),
+ &tmp, &nd);
+ if (rc) goto out;
+
+ if (!nd) continue;
+
+ GCREALLOC_ARRAY(*list, *num + nd);
+ for (k = 0; k < nd; k++) {
+ libxl_device_usb_copy(CTX, *list + *num, tmp + k);
+ (*num)++;
+ }
+ }
+ }
+
+ return 0;
+
+out:
+ LOG(ERROR, "fail to get assigned devices");
+ return rc;
+}
+
+static bool is_usbdev_in_array(libxl_device_usb *usbs, int num,
+ libxl_device_usb *usb)
+{
+ int i;
+
+ for (i = 0; i < num; i++) {
+ if (usbs[i].u.hostdev.hostbus == usb->u.hostdev.hostbus &&
+ usbs[i].u.hostdev.hostaddr == usb->u.hostdev.hostaddr)
+ return true;
+ }
+
+ return false;
+}
+
+/* check if USB device type is assignable */
+static bool is_usb_assignable(libxl__gc *gc, libxl_device_usb *usb)
+{
+ int classcode;
+ char *filename;
+ void *buf = NULL;
+ char *busid = NULL;
+
+ busid = usb_busaddr_to_busid(gc, usb->u.hostdev.hostbus,
+ usb->u.hostdev.hostaddr);
+ if (!busid) return false;
+
+ filename = GCSPRINTF(SYSFS_USB_DEV"/%s/bDeviceClass", busid);
+ if (libxl__read_sysfs_file_contents(gc, filename, &buf, NULL))
+ return false;
+
+ classcode = atoi(buf);
+ return classcode != USBHUB_CLASS_CODE;
+}
+
+/* get usb devices under certain usb controller */
+static int
+libxl__device_usb_list_for_usbctrl(libxl__gc *gc, uint32_t domid,
+ libxl_devid usbctrl,
+ libxl_device_usb **usbs, int *num)
+{
+ const char *fe_path, *be_path, *num_devs;
+ int n, i, rc;
+
+ *usbs = NULL;
+ *num = 0;
+
+ fe_path = GCSPRINTF("%s/device/vusb/%d",
+ libxl__xs_get_dompath(gc, domid), usbctrl);
+
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/backend", fe_path),
+ &be_path);
+ if (rc) goto out;
+
+ if (!be_path) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/num-ports", be_path),
+ &num_devs);
+ if (rc) goto out;
+
+ n = num_devs ? atoi(num_devs) : 0;
+
+ for (i = 0; i < n; i++) {
+ const char *busid;
+ libxl_device_usb *usb;
+
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/port/%d", be_path, i + 1),
+ &busid);
+ if (rc) goto out;
+
+ if (busid && strcmp(busid, "")) {
+ GCREALLOC_ARRAY(*usbs, *num + 1);
+ usb = *usbs + *num;
+ (*num)++;
+ libxl_device_usb_init(usb);
+ usb->ctrl = usbctrl;
+ usb->port = i + 1;
+ usb->devtype = LIBXL_USBDEV_TYPE_HOSTDEV;
+ rc = usb_busaddr_from_busid(gc, busid,
+ &usb->u.hostdev.hostbus,
+ &usb->u.hostdev.hostaddr);
+ if (rc) goto out;
+ }
+ }
+
+ rc = 0;
+
+out:
+ return rc;
+}
+
+/* get all usb devices of the domain */
+libxl_device_usb *
+libxl_device_usb_list(libxl_ctx *ctx, uint32_t domid, int *num)
+{
+ GC_INIT(ctx);
+ libxl_device_usb *usbs = NULL;
+ const char *path;
+ char **usbctrls;
+ unsigned int nc = 0;
+ int i, j;
+
+ *num = 0;
+
+ path = GCSPRINTF("%s/device/vusb",
+ libxl__xs_get_dompath(gc, domid));
+ usbctrls = libxl__xs_directory(gc, XBT_NULL, path, &nc);
+
+ for (i = 0; i < nc; i++) {
+ int r, nd = 0;
+ libxl_device_usb *tmp = NULL;
+
+ r = libxl__device_usb_list_for_usbctrl(gc, domid,
+ atoi(usbctrls[i]), &tmp, &nd);
+ if (!r || !nd) continue;
+
+ usbs = libxl__realloc(NOGC, usbs, sizeof(*usbs) * (*num + nd));
+ for (j = 0; j < nd; j++) {
+ libxl_device_usb_copy(ctx, usbs + *num, tmp + j);
+ (*num)++;
+ }
+ }
+
+ GC_FREE;
+ return usbs;
+}
+
+/* find first unused controller:port and give that to usb device */
+static int
+libxl__device_usb_set_default_usbctrl(libxl__gc *gc, uint32_t domid,
+ libxl_device_usb *usb)
+{
+ libxl_device_usbctrl *usbctrls = NULL;
+ int numctrl = 0;
+ int i, j, rc;
+
+ usbctrls = libxl_device_usbctrl_list(CTX, domid, &numctrl);
+ if (!numctrl || !usbctrls) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = ERROR_FAIL;
+ for (i = 0; i < numctrl; i++) {
+ for (j = 0; j < usbctrls[i].ports; j++) {
+ const char *path, *tmp;
+
+ path = GCSPRINTF("%s/backend/vusb/%d/%d/port/%d",
+ libxl__xs_get_dompath(gc, LIBXL_TOOLSTACK_DOMID),
+ domid, usbctrls[i].devid, j + 1);
+ tmp = libxl__xs_read(gc, XBT_NULL, path);
+ if (tmp && !strcmp(tmp, "")) {
+ usb->ctrl = usbctrls[i].devid;
+ usb->port = j + 1;
+ rc = 0;
+ goto out;
+ }
+ }
+ }
+
+out:
+ libxl_device_usbctrl_list_free(usbctrls, numctrl);
+ return rc;
+}
+
+/* Fill in usb information with default value.
+ *
+ * Generally, it does:
+ * 1) if "controller" is not specified:
+ * - if "port" is not specified, try to find an available controller:port,
+ * if found, use that; otherwise, create a new controller, use this
+ * controller and its first port
+ * - if "port" is specified, report error.
+ * 2) if "controller" is specified, but port is not specified:
+ * try to find an available port under this controller, if found, use
+ * that, otherwise, report error.
+ * 3) if both "controller" and "port" are specified:
+ * check the controller:port is available, if not, report error.
+ */
+static int libxl__device_usb_setdefault(libxl__gc *gc, uint32_t domid,
+ libxl_device_usb *usb,
+ bool update_json)
+{
+ int rc;
+
+ if (!usb->devtype)
+ usb->devtype = LIBXL_USBDEV_TYPE_HOSTDEV;
+
+ if (usb->ctrl == -1) {
+ if (usb->port) {
+ LOG(ERROR, "USB controller must be specified if you specify port");
+ return ERROR_INVAL;
+ }
+
+ rc = libxl__device_usb_set_default_usbctrl(gc, domid, usb);
+ /* If no existing controller to host this usb device, add a new one */
+ if (rc) {
+ libxl_device_usbctrl *usbctrl;
+
+ GCNEW(usbctrl);
+ libxl_device_usbctrl_init(usbctrl);
+ rc = libxl__device_usbctrl_setdefault(gc, domid, usbctrl);
+ if (rc < 0) goto out;
+
+ if (usbctrl->devid == -1) {
+ usbctrl->devid = libxl__device_nextid(gc, domid, "vusb");
+ if (usbctrl->devid < 0) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ }
+
+ rc = libxl__device_usbctrl_add_xenstore(gc, domid, usbctrl,
+ update_json);
+ if (rc) goto out;
+
+ usb->ctrl = usbctrl->devid;
+ usb->port = 1;
+ }
+ } else if (!usb->port) {
+ /* Valid port starts from 1. Choose port for us. */
+ int i, ports;
+ const char *fe_path, *be_path, *tmp;
+
+ fe_path = GCSPRINTF("%s/device/vusb/%d",
+ libxl__xs_get_dompath(gc, domid), usb->ctrl);
+
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/backend", fe_path), &be_path);
+ if (rc) goto out;
+
+ if (!be_path) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/num-ports", be_path), &tmp);
+ if (rc) goto out;
+
+ ports = tmp ? atoi(tmp) : 0;
+
+ for (i = 0; i < ports; i++) {
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/port/%d", be_path, i + 1),
+ &tmp);
+ if (rc) goto out;
+
+ if (tmp && !strcmp(tmp, "")) {
+ usb->port = i + 1;
+ break;
+ }
+ }
+
+ if (!usb->port) {
+ LOG(ERROR, "No available port under specified controller");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ } else {
+ const char *fe_path, *be_path, *tmp;
+
+ fe_path = GCSPRINTF("%s/device/vusb/%d",
+ libxl__xs_get_dompath(gc, domid), usb->ctrl);
+
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/backend", fe_path), &be_path);
+ if (rc) goto out;
+
+ if (!be_path) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/port/%d", be_path, usb->port),
+ &tmp);
+ if (rc) goto out;
+
+ if (tmp && strcmp(tmp, "")) {
+ LOG(ERROR, "The controller port isn't available");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ }
+
+ rc = 0;
+
+out:
+ return rc;
+}
+
+/* Add usb information to xenstore
+ *
+ * Adding a usb device won't create new 'vusb' device, but only write
+ * the device busid to the controller:port in xenstore.
+ */
+static int libxl__device_usb_add_xenstore(libxl__gc *gc, uint32_t domid,
+ libxl_device_usb *usb,
+ bool update_json)
+{
+ char *be_path, *busid;
+ int rc;
+ xs_transaction_t t = XBT_NULL;
+ libxl_domain_config d_config;
+ libxl_device_usb usb_saved;
+ libxl__domain_userdata_lock *lock = NULL;
+
+ libxl_domain_config_init(&d_config);
+ libxl_device_usb_init(&usb_saved);
+ libxl_device_usb_copy(CTX, &usb_saved, usb);
+
+ busid = usb_busaddr_to_busid(gc, usb->u.hostdev.hostbus,
+ usb->u.hostdev.hostaddr);
+ if (!busid) {
+ LOG(DEBUG, "Fail to get busid of usb device");
+ goto out;
+ }
+
+ if (update_json) {
+ lock = libxl__lock_domain_userdata(gc, domid);
+ if (!lock) {
+ rc = ERROR_LOCK_FAIL;
+ goto out;
+ }
+
+ rc = libxl__get_domain_configuration(gc, domid, &d_config);
+ if (rc) goto out;
+
+ DEVICE_ADD(usb, usbs, domid, &usb_saved, COMPARE_USB, &d_config);
+ }
+
+ for (;;) {
+ rc = libxl__xs_transaction_start(gc, &t);
+ if (rc) goto out;
+
+ if (update_json) {
+ rc = libxl__set_domain_configuration(gc, domid, &d_config);
+ if (rc) goto out;
+ }
+
+ be_path = GCSPRINTF("%s/backend/vusb/%d/%d/port/%d",
+ libxl__xs_get_dompath(gc, LIBXL_TOOLSTACK_DOMID),
+ domid, usb->ctrl, usb->port);
+
+ LOG(DEBUG, "Adding usb device %s to xenstore: controller %d, port %d",
+ busid, usb->ctrl, usb->port);
+
+ if (libxl__xs_write_checked(gc, t, be_path, busid))
+ goto out;
+
+ rc = libxl__xs_transaction_commit(gc, &t);
+ if (!rc) break;
+ if (rc < 0) goto out;
+ }
+
+ rc = 0;
+
+out:
+ if (lock) libxl__unlock_domain_userdata(lock);
+ libxl_device_usb_dispose(&usb_saved);
+ libxl_domain_config_dispose(&d_config);
+ return rc;
+}
+
+static int libxl__device_usb_remove_xenstore(libxl__gc *gc, uint32_t domid,
+ libxl_device_usb *usb)
+{
+ char *be_path;
+
+ be_path = GCSPRINTF("%s/backend/vusb/%d/%d/port/%d",
+ libxl__xs_get_dompath(gc, LIBXL_TOOLSTACK_DOMID),
+ domid, usb->ctrl, usb->port);
+
+ LOG(DEBUG, "Removing usb device from xenstore: controller %d, port %d",
+ usb->ctrl, usb->port);
+
+ return libxl__xs_write_checked(gc, XBT_NULL, be_path, "");
+}
+
+static char *usbback_busid_from_ctrlport(libxl__gc *gc, uint32_t domid,
+ libxl_device_usb *usb)
+{
+ return libxl__xs_read(gc, XBT_NULL,
+ GCSPRINTF("%s/backend/vusb/%d/%d/port/%d",
+ libxl__xs_get_dompath(gc, LIBXL_TOOLSTACK_DOMID),
+ domid, usb->ctrl, usb->port));
+}
+
+/* get original driver path of usb interface, stored in @drvpath */
+static int usb_intf_get_drvpath(libxl__gc *gc, const char *intf,
+ char **drvpath)
+{
+ char *spath, *dp = NULL;
+ struct stat st;
+ int rc;
+
+ spath = GCSPRINTF(SYSFS_USB_DEV"/%s/driver", intf);
+
+ rc = lstat(spath, &st);
+ if (rc == 0) {
+ /* Find the canonical path to the driver. */
+ dp = libxl__zalloc(gc, PATH_MAX);
+ dp = realpath(spath, dp);
+ } else if (errno != ENOENT) {
+ LOGE(ERROR, "lstat failed: '%s'", spath);
+ return ERROR_FAIL;
+ }
+
+ *drvpath = dp;
+
+ return 0;
+}
+
+static int sysfs_write_intf(libxl__gc *gc, const char *intf, const char *path)
+{
+ int rc, fd = -1;
+
+ fd = open(path, O_WRONLY);
+ if (fd < 0) {
+ LOGE(ERROR, "open file failed: '%s'", path);
+ return ERROR_FAIL;
+ }
+
+ rc = write(fd, intf, strlen(intf));
+ close(fd);
+ if (rc < 0) {
+ LOGE(ERROR, "write '%s' to '%s' failed", intf, path);
+ return errno;
+ }
+ if (rc != strlen(intf)) {
+ LOG(ERROR, "write '%s' to '%s' failed: incorrect write count",
+ intf, path);
+ return ERROR_FAIL;
+ }
+
+ return 0;
+}
+
+static int unbind_usb_intf(libxl__gc *gc, const char *intf)
+{
+ char *path;
+
+ path = GCSPRINTF(SYSFS_USB_DEV"/%s/driver/unbind", intf);
+ return sysfs_write_intf(gc, intf, path);
+}
+
+static int bind_usb_intf(libxl__gc *gc, const char *intf, const char *drvpath)
+{
+ char *path;
+ struct stat st;
+
+ path = GCSPRINTF("%s/%s", drvpath, intf);
+ /* if already bound, return */
+ if (!lstat(path, &st))
+ return 0;
+
+ path = GCSPRINTF("%s/bind", drvpath);
+ return sysfs_write_intf(gc, intf, path);
+}
+
+/* Is usb interface bound to usbback? */
+static int usb_intf_is_assigned(libxl__gc *gc, char *intf)
+{
+ char *spath;
+ int rc;
+ struct stat st;
+
+ spath = GCSPRINTF(SYSFS_USBBACK_DRIVER"/%s", intf);
+ rc = lstat(spath, &st);
+
+ if (rc == 0)
+ return 1;
+ if (rc < 0 && errno == ENOENT)
+ return 0;
+ LOGE(ERROR, "Accessing %s", spath);
+ return -1;
+}
+
+static int usb_get_all_interfaces(libxl__gc *gc, char *busid,
+ char ***intfs, int *num)
+{
+ DIR *dir;
+ char *buf;
+ int rc;
+
+ *intfs = NULL;
+ *num = 0;
+
+ buf = GCSPRINTF("%s:", busid);
+
+ dir = opendir(SYSFS_USB_DEV);
+ if (!dir) {
+ LOGE(ERROR, "opendir failed: '%s'", SYSFS_USB_DEV);
+ return ERROR_FAIL;
+ }
+
+ size_t need = offsetof(struct dirent, d_name) +
+ pathconf(SYSFS_USB_DEV, _PC_NAME_MAX) + 1;
+ struct dirent *de_buf = libxl__zalloc(gc, need);
+ struct dirent *de;
+
+ for (;;) {
+ int r = readdir_r(dir, de_buf, &de);
+
+ if (r) {
+ LOGE(ERROR, "failed to readdir %s", SYSFS_USB_DEV);
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ if (!de)
+ break;
+
+ if (!strcmp(de->d_name, ".") ||
+ !strcmp(de->d_name, ".."))
+ continue;
+
+ if (!strncmp(de->d_name, buf, strlen(buf))) {
+ GCREALLOC_ARRAY(*intfs, *num + 1);
+ (*intfs)[*num] = libxl__strdup(gc, de->d_name);
+ (*num)++;
+ }
+ }
+
+ rc = 0;
+
+out:
+ closedir(dir);
+ return rc;
+}
+
+/* Encode usb interface so that it could be written to xenstore as a key.
+ *
+ * Since xenstore key cannot include '.' or ':', we'll change '.' to '_',
+ * change ':' to '@'. For example, 3-1:2.1 will be encoded to 3-1@2_1.
+ * This will be used to save original driver of USB device to xenstore.
+ */
+static char *usb_interface_xenstore_encode(libxl__gc *gc, const char *busid)
+{
+ char *str = libxl__strdup(gc, busid);
+ int i, len = strlen(str);
+
+ for (i = 0; i < len; i++) {
+ if (str[i] == '.')
+ str[i] = '_';
+ if (str[i] == ':')
+ str[i] = '@';
+ }
+ return str;
+}
+
+/* Unbind USB device from "usbback" driver.
+ *
+ * If there are many interfaces under USB device, check each interface,
+ * unbind from "usbback" driver and rebind to its original driver.
+ */
+static int usbback_dev_unassign(libxl__gc *gc, char *busid)
+{
+ char **intfs = NULL;
+ char *usb_encode = NULL;
+ char *path = NULL;
+ int i, num = 0;
+ int rc;
+
+ if (usb_get_all_interfaces(gc, busid, &intfs, &num) < 0)
+ return ERROR_FAIL;
+
+ usb_encode = usb_interface_xenstore_encode(gc, busid);
+
+ for (i = 0; i < num; i++) {
+ char *intf = intfs[i];
+ char *usb_intf_encode = NULL;
+ const char *drvpath;
+
+ /* check if the USB interface is already bound to "usbback" */
+ if (usb_intf_is_assigned(gc, intf) > 0) {
+ /* unbind interface from usbback driver */
+ if (unbind_usb_intf(gc, intf) < 0) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ }
+
+ /* try to rebind USB interface to its originial driver.
+ * If rebinding failed, export warning so that user can
+ * handle it later.
+ */
+ usb_intf_encode = usb_interface_xenstore_encode(gc, intf);
+ path = GCSPRINTF(USBBACK_INFO_PATH"/%s/%s/driver_path",
+ usb_encode, usb_intf_encode);
+ rc = libxl__xs_read_checked(gc, XBT_NULL, path, &drvpath);
+ if (rc) continue;
+
+ if (drvpath && bind_usb_intf(gc, intf, drvpath))
+ LOGE(WARN, "Couldn't rebind %s to %s", intf, drvpath);
+ }
+
+ /* finally, remove xenstore driver path */
+ path = GCSPRINTF(USBBACK_INFO_PATH"/%s", usb_encode);
+ libxl__xs_rm_checked(gc, XBT_NULL, path);
+ rc = 0;
+
+out:
+ return rc;
+}
+
+/* Bind USB device to "usbback" driver.
+ *
+ * If there are many interfaces under USB device, check each interface,
+ * unbind from original driver and bind to "usbback" driver.
+ */
+static int usbback_dev_assign(libxl__gc *gc, libxl_device_usb *usb)
+{
+ char **intfs = NULL;
+ int num = 0, i;
+ int rc;
+ char *busid;
+ char *usb_encode = NULL;
+
+ busid = usb_busaddr_to_busid(gc, usb->u.hostdev.hostbus,
+ usb->u.hostdev.hostaddr);
+ if (!busid)
+ return ERROR_FAIL;
+
+ rc = usb_get_all_interfaces(gc, busid, &intfs, &num);
+ if (rc)
+ return rc;
+
+ usb_encode = usb_interface_xenstore_encode(gc, busid);
+
+ for (i = 0; i < num; i++) {
+ char *intf = intfs[i];
+ char *drvpath = NULL;
+
+ /* already assigned to usbback */
+ if (usb_intf_is_assigned(gc, intf) > 0)
+ continue;
+
+ rc = usb_intf_get_drvpath(gc, intf, &drvpath);
+ if (rc < 0) goto out;
+
+ if (drvpath) {
+ /* write driver path to xenstore for later rebinding */
+ char *usb_intf_encode = NULL;
+ char *path;
+
+ usb_intf_encode = usb_interface_xenstore_encode(gc, intf);
+ path = GCSPRINTF(USBBACK_INFO_PATH"/%s/%s/driver_path",
+ usb_encode, usb_intf_encode);
+ if (libxl__xs_write_checked(gc, XBT_NULL, path, drvpath) < 0)
+ goto out;
+
+ /* unbind interface from original driver */
+ if (unbind_usb_intf(gc, intf) < 0) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ }
+
+ /* bind interface to usbback */
+ if (bind_usb_intf(gc, intf, SYSFS_USBBACK_DRIVER) < 0) {
+ LOG(ERROR, "Couldn't bind %s to %s", intf, SYSFS_USBBACK_DRIVER);
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ }
+
+ return 0;
+
+out:
+ /* some interfaces might be bound to usbback, unbind it and
+ * rebind it to its original driver
+ */
+ usbback_dev_unassign(gc, busid);
+ return rc;
+}
+
+static int do_usb_add(libxl__gc *gc, uint32_t domid,
+ libxl_device_usb *usbdev,
+ bool update_json)
+{
+ int rc;
+ libxl_device_usbctrl usbctrl;
+ libxl_usbctrlinfo usbctrlinfo;
+
+ libxl_device_usbctrl_init(&usbctrl);
+ libxl_usbctrlinfo_init(&usbctrlinfo);
+ usbctrl.devid = usbdev->ctrl;
+
+ rc = libxl_device_usbctrl_getinfo(CTX, domid, &usbctrl, &usbctrlinfo);
+ if (rc) goto out;
+
+ switch (usbctrlinfo.type) {
+ case LIBXL_USBCTRL_TYPE_PV:
+ rc = libxl__device_usb_add_xenstore(gc, domid, usbdev, update_json);
+ if (rc) goto out;
+
+ rc = usbback_dev_assign(gc, usbdev);
+ if (rc) {
+ libxl__device_usb_remove_xenstore(gc, domid, usbdev);
+ goto out;
+ }
+ break;
+ case LIBXL_USBCTRL_TYPE_DEVICEMODEL:
+ default:
+ LOG(ERROR, "Unsupported usb controller type");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = 0;
+
+out:
+ libxl_device_usbctrl_dispose(&usbctrl);
+ libxl_usbctrlinfo_dispose(&usbctrlinfo);
+ return rc;
+}
+
+/* AO operation to add a usb device.
+ *
+ * Generally, it does:
+ * 1) check if the usb device type is assignable
+ * 2) check if the usb device is already assigned to a domain
+ * 3) add 'busid' of the usb device to xenstore contoller/port/.
+ * (PVUSB driver watches the xenstore changes and will detect that.)
+ * 4) unbind usb device from original driver and bind to usbback.
+ * If usb device has many interfaces, then:
+ * - unbind each interface from its original driver and bind to usbback.
+ * - store the original driver to xenstore for later rebinding when
+ * detaching the device.
+ *
+ * Before calling this function, aodev should be properly filled:
+ * aodev->ao, aodev->callback, aodev->update_json, ...
+ */
+void libxl__device_usb_add(libxl__egc *egc, uint32_t domid,
+ libxl_device_usb *usb,
+ libxl__ao_device *aodev)
+{
+ STATE_AO_GC(aodev->ao);
+ int rc;
+ libxl_device_usb *assigned;
+ int num_assigned;
+ libxl_device_usbctrl usbctrl;
+ libxl_usbctrlinfo usbctrlinfo;
+
+ libxl_device_usbctrl_init(&usbctrl);
+ libxl_usbctrlinfo_init(&usbctrlinfo);
+
+ /* Currently only support adding USB device from Dom0 backend.
+ * So, if USB controller is specified, check its backend domain,
+ * if it's not Dom0, report error.
+ */
+ if (usb->ctrl != -1) {
+ usbctrl.devid = usb->ctrl;
+ rc = libxl_device_usbctrl_getinfo(CTX, domid, &usbctrl, &usbctrlinfo);
+ if (rc) goto out;
+
+ if (usbctrlinfo.backend_id != LIBXL_TOOLSTACK_DOMID) {
+ LOG(ERROR, "Don't support adding USB device from non-Dom0 backend");
+ rc = ERROR_INVAL;
+ goto out;
+ }
+ }
+
+ /* check usb device is assignable type */
+ if (!is_usb_assignable(gc, usb)) {
+ LOG(ERROR, "USB device is not assignable.");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ /* check usb device is already assigned */
+ rc = get_assigned_devices(gc, &assigned, &num_assigned);
+ if (rc) {
+ LOG(ERROR, "cannot determine if device is assigned,"
+ " refusing to continue");
+ goto out;
+ }
+
+ if (is_usbdev_in_array(assigned, num_assigned, usb)) {
+ LOG(ERROR, "USB device already attached to a domain");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ /* fill default values, e.g, if usb->ctrl and usb->port not specified,
+ * choose first available controller:port and fill in. */
+ rc = libxl__device_usb_setdefault(gc, domid, usb, aodev->update_json);
+ if (rc) goto out;
+
+ /* do actual adding usb device operation */
+ rc = do_usb_add(gc, domid, usb, aodev->update_json);
+
+out:
+ libxl_device_usbctrl_dispose(&usbctrl);
+ libxl_usbctrlinfo_dispose(&usbctrlinfo);
+ aodev->rc = rc;
+ aodev->callback(egc, aodev);
+ return;
+}
+
+static int do_usb_remove(libxl__gc *gc, uint32_t domid,
+ libxl_device_usb *usbdev)
+{
+ int rc;
+ char *busid;
+ libxl_device_usbctrl usbctrl;
+ libxl_usbctrlinfo usbctrlinfo;
+
+ libxl_device_usbctrl_init(&usbctrl);
+ libxl_usbctrlinfo_init(&usbctrlinfo);
+ usbctrl.devid = usbdev->ctrl;
+
+ rc = libxl_device_usbctrl_getinfo(CTX, domid, &usbctrl, &usbctrlinfo);
+ if (rc) goto out;
+
+ switch (usbctrlinfo.type) {
+ case LIBXL_USBCTRL_TYPE_PV:
+ busid = usbback_busid_from_ctrlport(gc, domid, usbdev);
+ if (!busid) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = libxl__device_usb_remove_xenstore(gc, domid, usbdev);
+ if (rc) goto out;
+
+ rc = usbback_dev_unassign(gc, busid);
+ if (rc) {
+ /* Till here, usb device information is already removed
+ * from xenstore, usb list couldn't list it any more.
+ * If unassign usb device from usbback failed, export
+ * warning only so that user could handle driver status
+ * later.
+ */
+ LOG(WARN, "unbind usb device from usbback and rebind to its "
+ "original driver failed");
+ }
+ break;
+ case LIBXL_USBCTRL_TYPE_DEVICEMODEL:
+ default:
+ LOG(ERROR, "Unsupported usb controller type");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = 0;
+
+out:
+ libxl_device_usbctrl_dispose(&usbctrl);
+ libxl_usbctrlinfo_dispose(&usbctrlinfo);
+ return rc;
+}
+
+/* Operation to remove usb device.
+ *
+ * Generally, it does:
+ * 1) check if the usb device is assigned to the domain
+ * 2) remove the usb device from xenstore controller/port.
+ * 3) unbind usb device from usbback and rebind to its original driver.
+ * If usb device has many interfaces, do it to each interface.
+ */
+static int libxl__device_usb_remove(libxl__gc *gc, uint32_t domid,
+ libxl_device_usb *usb)
+{
+ libxl_usbctrlinfo usbctrlinfo;
+ libxl_device_usbctrl usbctrl;
+ int rc;
+
+ if (usb->ctrl < 0 || usb->port < 1) {
+ LOG(ERROR, "Invalid USB device");
+ return ERROR_FAIL;
+ }
+
+ libxl_device_usbctrl_init(&usbctrl);
+ libxl_usbctrlinfo_init(&usbctrlinfo);
+ usbctrl.devid = usb->ctrl;
+
+ rc = libxl_device_usbctrl_getinfo(CTX, domid, &usbctrl, &usbctrlinfo);
+ if (rc) goto out;
+
+ if (usbctrlinfo.backend_id != LIBXL_TOOLSTACK_DOMID) {
+ LOG(ERROR, "Don't support removing USB device from non-Dom0 backend");
+ rc = ERROR_INVAL;
+ goto out;
+ }
+
+ /* do actual removing usb device operation */
+ rc = do_usb_remove(gc, domid, usb);
+
+out:
+ libxl_device_usbctrl_dispose(&usbctrl);
+ libxl_usbctrlinfo_dispose(&usbctrlinfo);
+ return rc;
+}
+
+int libxl_device_usb_remove(libxl_ctx *ctx, uint32_t domid,
+ libxl_device_usb *usb,
+ const libxl_asyncop_how *ao_how)
+
+{
+ AO_CREATE(ctx, domid, ao_how);
+ int rc;
+
+ rc = libxl__device_usb_remove(gc, domid, usb);
+
+ libxl__ao_complete(egc, ao, rc);
+ return AO_INPROGRESS;
+}
+
+int libxl_ctrlport_to_device_usb(libxl_ctx *ctx,
+ uint32_t domid,
+ int ctrl,
+ int port,
+ libxl_device_usb *usb)
+{
+ GC_INIT(ctx);
+ const char *dompath, *be_path, *busid;
+ int rc;
+
+ dompath = libxl__xs_get_dompath(gc, domid);
+
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/device/vusb/%d/backend", dompath, ctrl),
+ &be_path);
+ if (rc) goto out;
+
+ if (!be_path) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/port/%d", be_path, port),
+ &busid);
+ if (rc) goto out;
+
+ if (!busid || !strcmp(busid, "")) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ usb->ctrl = ctrl;
+ usb->port = port;
+ usb->devtype = LIBXL_USBDEV_TYPE_HOSTDEV;
+ rc = usb_busaddr_from_busid(gc, busid, &usb->u.hostdev.hostbus,
+ &usb->u.hostdev.hostaddr);
+
+out:
+ GC_FREE;
+ return rc;
+}
+/*
+ * Local variables:
+ * mode: C
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
index d6ef9a2..24183c8 100644
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -603,6 +603,35 @@ libxl_device_rdm = Struct("device_rdm", [
("policy", libxl_rdm_reserve_policy),
])
+libxl_usbctrl_type = Enumeration("usbctrl_type", [
+ (0, "AUTO"),
+ (1, "PV"),
+ (2, "DEVICEMODEL"),
+ ])
+
+libxl_usbdev_type = Enumeration("usbdev_type", [
+ (1, "hostdev"),
+ ])
+
+libxl_device_usbctrl = Struct("device_usbctrl", [
+ ("type", libxl_usbctrl_type),
+ ("devid", libxl_devid),
+ ("version", integer),
+ ("ports", integer),
+ ("backend_domid", libxl_domid),
+ ("backend_domname", string),
+ ])
+
+libxl_device_usb = Struct("device_usb", [
+ ("ctrl", libxl_devid),
+ ("port", integer),
+ ("u", KeyedUnion(None, libxl_usbdev_type, "devtype",
+ [("hostdev", Struct(None, [
+ ("hostbus", uint8),
+ ("hostaddr", uint8)])),
+ ])),
+ ])
+
libxl_device_dtdev = Struct("device_dtdev", [
("path", string),
])
@@ -635,6 +664,8 @@ libxl_domain_config = Struct("domain_config", [
("pcidevs", Array(libxl_device_pci, "num_pcidevs")),
("rdms", Array(libxl_device_rdm, "num_rdms")),
("dtdevs", Array(libxl_device_dtdev, "num_dtdevs")),
+ ("usbctrls", Array(libxl_device_usbctrl, "num_usbctrls")),
+ ("usbs", Array(libxl_device_usb, "num_usbs")),
("vfbs", Array(libxl_device_vfb, "num_vfbs")),
("vkbs", Array(libxl_device_vkb, "num_vkbs")),
("vtpms", Array(libxl_device_vtpm, "num_vtpms")),
@@ -684,6 +715,21 @@ libxl_vtpminfo = Struct("vtpminfo", [
("uuid", libxl_uuid),
], dir=DIR_OUT)
+libxl_usbctrlinfo = Struct("usbctrlinfo", [
+ ("type", libxl_usbctrl_type),
+ ("devid", libxl_devid),
+ ("version", integer),
+ ("ports", integer),
+ ("backend", string),
+ ("backend_id", uint32),
+ ("frontend", string),
+ ("frontend_id", uint32),
+ ("state", integer),
+ ("evtch", integer),
+ ("ref_urb", integer),
+ ("ref_conn", integer),
+ ], dir=DIR_OUT)
+
libxl_vcpuinfo = Struct("vcpuinfo", [
("vcpuid", uint32),
("cpu", uint32),
diff --git a/tools/libxl/libxl_types_internal.idl b/tools/libxl/libxl_types_internal.idl
index 5e55685..696f5f8 100644
--- a/tools/libxl/libxl_types_internal.idl
+++ b/tools/libxl/libxl_types_internal.idl
@@ -22,6 +22,7 @@ libxl__device_kind = Enumeration("device_kind", [
(6, "VKBD"),
(7, "CONSOLE"),
(8, "VTPM"),
+ (9, "VUSB"),
])
libxl__console_backend = Enumeration("console_backend", [
diff --git a/tools/libxl/libxl_utils.c b/tools/libxl/libxl_utils.c
index 7f612a6..f7f84b6 100644
--- a/tools/libxl/libxl_utils.c
+++ b/tools/libxl/libxl_utils.c
@@ -1314,6 +1314,24 @@ int libxl__random_bytes(libxl__gc *gc, uint8_t *buf, size_t len)
return ret;
}
+void libxl_device_usbctrl_list_free(libxl_device_usbctrl *list, int nr)
+{
+ int i;
+
+ for (i = 0; i < nr; i++)
+ libxl_device_usbctrl_dispose(&list[i]);
+ free(list);
+}
+
+void libxl_device_usb_list_free(libxl_device_usb *list, int nr)
+{
+ int i;
+
+ for (i = 0; i < nr; i++)
+ libxl_device_usb_dispose(&list[i]);
+ free(list);
+}
+
/*
* Local variables:
* mode: C
diff --git a/tools/libxl/libxl_utils.h b/tools/libxl/libxl_utils.h
index 339ebdf..60487e3 100644
--- a/tools/libxl/libxl_utils.h
+++ b/tools/libxl/libxl_utils.h
@@ -76,6 +76,11 @@ int libxl_uuid_to_device_vtpm(libxl_ctx *ctx, uint32_t domid,
libxl_uuid *uuid, libxl_device_vtpm *vtpm);
int libxl_devid_to_device_vtpm(libxl_ctx *ctx, uint32_t domid,
int devid, libxl_device_vtpm *vtpm);
+int libxl_devid_to_device_usbctrl(libxl_ctx *ctx, uint32_t domid,
+ int devid, libxl_device_usbctrl *usbctrl);
+int libxl_ctrlport_to_device_usb(libxl_ctx *ctx, uint32_t domid,
+ int ctrl, int port,
+ libxl_device_usb *usb);
int libxl_bitmap_alloc(libxl_ctx *ctx, libxl_bitmap *bitmap, int n_bits);
/* Allocated bimap is from malloc, libxl_bitmap_dispose() to be
--
2.1.4
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH V9 5/7] xl: add pvusb commands
2015-11-24 8:35 [PATCH V9 0/7] xen pvusb toolstack work Chunyan Liu
` (3 preceding siblings ...)
2015-11-24 8:35 ` [PATCH V9 4/7] libxl: add libxl_device_usb_assignable_list API Chunyan Liu
@ 2015-11-24 8:35 ` Chunyan Liu
2015-11-24 8:35 ` [PATCH V9 6/7] xl: add usb-assignable-list command Chunyan Liu
` (2 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Chunyan Liu @ 2015-11-24 8:35 UTC (permalink / raw)
To: xen-devel
Cc: jgross, wei.liu2, ian.campbell, george.dunlap, Ian.Jackson,
Chunyan Liu, jfehlig, Simon Cao
Add pvusb commands: usb-ctrl-attach, usb-ctrl-detach, usb-list,
usb-attach and usb-detach.
To attach a usb device to guest through pvusb, one could follow
following example:
#xl usbctrl-attach test_vm version=1 ports=8
#xl usb-list test_vm
will show the usb controllers and port usage under the domain.
#xl usb-attach test_vm hostbus=1 hostaddr=2
will find the first usable controller:port, and attach usb
device whose busnum is 1 and devnum is 6.
One could also specify which <controller> and which <port>.
#xl usb-detach test_vm 0 1
will detach USB device under controller 0 port 1.
#xl usbctrl-detach test_vm dev_id
will destroy the controller with specified dev_id. Dev_id
can be traced in usb-list info.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Simon Cao <caobosimon@gmail.com>
---
Changes:
- use libxl_usbdev/usbctrl_type_from_string instead of
comparing oparg string mannually.
- update docs as George suggested
docs/man/xl.pod.1 | 41 ++++++++
tools/libxl/xl.h | 5 +
tools/libxl/xl_cmdimpl.c | 241 ++++++++++++++++++++++++++++++++++++++++++++++
tools/libxl/xl_cmdtable.c | 25 +++++
4 files changed, 312 insertions(+)
diff --git a/docs/man/xl.pod.1 b/docs/man/xl.pod.1
index d0cd612..eb02238 100644
--- a/docs/man/xl.pod.1
+++ b/docs/man/xl.pod.1
@@ -1345,6 +1345,47 @@ List pass-through pci devices for a domain.
=back
+=head1 USB PASS-THROUGH
+
+=over 4
+
+=item B<usbctrl-attach> I<domain-id> I[<type=val>] [I<version=val>] [I<ports=number>]
+
+Create a new USB controller for the specified domain.
+B<type=val> is the usb controller type. Currently only 'pv' and 'auto'
+are supported.
+B<version=val> is the usb controller version. Possible values include
+1 (USB1.1) and 2 (USB2.0).
+B<ports=number> is the total ports of the usb controller. The maximum
+number is 31.
+By default, it will create a USB2.0 controller with 8 ports.
+
+=item B<usbctrl-detach> I<domain-id> I<devid>
+
+Destroy a USB controller from the specified domain.
+B<devid> is devid of the USB controller.
+
+=item B<usb-attach> I<domain-id> I<hostbus=busnum> I<hostaddr=devnum> [I<controller=devid> [I<port=number>]]
+
+Hot-plug a new pass-through USB device to the specified domain.
+B<hostbus> and B<hostaddr> are the bus and device number of the physical
+USB device to pass through.
+B<controller=devid> B<port=number> is the USB controller:port to hotplug the
+USB device to. By default, it will find the first available controller:port
+and use it; if there is no controller, a new controller will be created.
+
+=item B<usb-detach> I<domain-id> I<controller=devid> I<port=number>
+
+Hot-unplug a previously assigned USB device from a domain.
+B<controller=devid> and B<port=number> is USB controller:port in guest where the
+USB device is attached to.
+
+=item B<usb-list> I<domain-id>
+
+List pass-through usb devices for a domain.
+
+=back
+
=head1 TMEM
=over 4
diff --git a/tools/libxl/xl.h b/tools/libxl/xl.h
index 0021112..ddd9690 100644
--- a/tools/libxl/xl.h
+++ b/tools/libxl/xl.h
@@ -85,6 +85,11 @@ int main_blockdetach(int argc, char **argv);
int main_vtpmattach(int argc, char **argv);
int main_vtpmlist(int argc, char **argv);
int main_vtpmdetach(int argc, char **argv);
+int main_usbctrl_attach(int argc, char **argv);
+int main_usbctrl_detach(int argc, char **argv);
+int main_usbattach(int argc, char **argv);
+int main_usbdetach(int argc, char **argv);
+int main_usblist(int argc, char **argv);
int main_uptime(int argc, char **argv);
int main_claims(int argc, char **argv);
int main_tmem_list(int argc, char **argv);
diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
index 365798b..25b472c 100644
--- a/tools/libxl/xl_cmdimpl.c
+++ b/tools/libxl/xl_cmdimpl.c
@@ -1255,6 +1255,58 @@ static void parse_vnuma_config(const XLU_Config *config,
free(vcpu_parsed);
}
+/* Parses usbctrl data and adds info into usbctrl
+ * Returns 1 if the input token does not match one of the keys
+ * or parsed values are not correct. Successful parse returns 0 */
+static int parse_usbctrl_config(libxl_device_usbctrl *usbctrl, char *token)
+{
+ char *oparg;
+
+ if (MATCH_OPTION("type", token, oparg)) {
+ if (libxl_usbctrl_type_from_string(oparg, &usbctrl->type)) {
+ fprintf(stderr, "Invalid usb controller type '%s'\n", oparg);
+ return 1;
+ }
+ } else if (MATCH_OPTION("version", token, oparg)) {
+ usbctrl->version = atoi(oparg);
+ } else if (MATCH_OPTION("ports", token, oparg)) {
+ usbctrl->ports = atoi(oparg);
+ } else {
+ fprintf(stderr, "Unknown string `%s' in usb spec\n", token);
+ return 1;
+ }
+
+ return 0;
+}
+
+/* Parses usb data and adds info into usb
+ * Returns 1 if the input token does not match one of the keys
+ * or parsed values are not correct. Successful parse returns 0 */
+static int parse_usb_config(libxl_device_usb *usb, char *token)
+{
+ char *oparg;
+
+ if (MATCH_OPTION("devtype", token, oparg)) {
+ if (libxl_usbdev_type_from_string(oparg, &usb->devtype)) {
+ fprintf(stderr, "Invalid usb type: %s\n", optarg);
+ return 1;
+ }
+ } else if (MATCH_OPTION("hostbus", token, oparg)) {
+ usb->u.hostdev.hostbus = strtoul(oparg, NULL, 0);
+ } else if (MATCH_OPTION("hostaddr", token, oparg)) {
+ usb->u.hostdev.hostaddr = strtoul(oparg, NULL, 0);
+ } else if (MATCH_OPTION("controller", token, oparg)) {
+ usb->ctrl = atoi(oparg);
+ } else if (MATCH_OPTION("port", token, oparg)) {
+ usb->port = atoi(oparg);
+ } else {
+ fprintf(stderr, "Unknown string `%s' in usb spec\n", token);
+ return 1;
+ }
+
+ return 0;
+}
+
static void parse_config_data(const char *config_source,
const char *config_data,
int config_len,
@@ -3396,6 +3448,195 @@ int main_cd_insert(int argc, char **argv)
return 0;
}
+int main_usbctrl_attach(int argc, char **argv)
+{
+ uint32_t domid;
+ int opt, rc = 0;
+ libxl_device_usbctrl usbctrl;
+
+ SWITCH_FOREACH_OPT(opt, "", NULL, "usbctrl-attach", 1) {
+ /* No options */
+ }
+
+ domid = find_domain(argv[optind++]);
+
+ libxl_device_usbctrl_init(&usbctrl);
+
+ for (argv += optind, argc -= optind; argc > 0; ++argv, --argc) {
+ if (parse_usbctrl_config(&usbctrl, *argv))
+ return 1;
+ }
+
+ rc = libxl_device_usbctrl_add(ctx, domid, &usbctrl, 0);
+ if (rc) {
+ fprintf(stderr, "libxl_device_usbctrl_add failed.\n");
+ rc = 1;
+ }
+
+ libxl_device_usbctrl_dispose(&usbctrl);
+ return rc;
+}
+
+int main_usbctrl_detach(int argc, char **argv)
+{
+ uint32_t domid;
+ int opt, devid, rc;
+ libxl_device_usbctrl usbctrl;
+
+ SWITCH_FOREACH_OPT(opt, "", NULL, "usbctrl-detach", 2) {
+ /* No options */
+ }
+
+ domid = find_domain(argv[optind]);
+ devid = atoi(argv[optind+1]);
+
+ libxl_device_usbctrl_init(&usbctrl);
+ if (libxl_devid_to_device_usbctrl(ctx, domid, devid, &usbctrl)) {
+ fprintf(stderr, "Unknown device %s.\n", argv[optind+1]);
+ return 1;
+ }
+
+ rc = libxl_device_usbctrl_remove(ctx, domid, &usbctrl, 0);
+ if (rc) {
+ fprintf(stderr, "libxl_device_usbctrl_remove failed.\n");
+ rc = 1;
+ }
+
+ libxl_device_usbctrl_dispose(&usbctrl);
+ return rc;
+
+}
+
+int main_usbattach(int argc, char **argv)
+{
+ uint32_t domid;
+ int opt, rc;
+ libxl_device_usb usb;
+
+ SWITCH_FOREACH_OPT(opt, "", NULL, "usb-attach", 2) {
+ /* No options */
+ }
+
+ libxl_device_usb_init(&usb);
+
+ domid = find_domain(argv[optind++]);
+
+ for (argv += optind, argc -= optind; argc > 0; ++argv, --argc) {
+ if (parse_usb_config(&usb, *argv))
+ return 1;
+ }
+
+ rc = libxl_device_usb_add(ctx, domid, &usb, 0);
+ if (rc) {
+ fprintf(stderr, "libxl_device_usb_add failed.\n");
+ rc = 1;
+ }
+
+ libxl_device_usb_dispose(&usb);
+ return rc;
+}
+
+int main_usbdetach(int argc, char **argv)
+{
+ uint32_t domid;
+ int ctrl, port;
+ int opt, rc = 1;
+ libxl_device_usb usb;
+
+ SWITCH_FOREACH_OPT(opt, "", NULL, "usb-detach", 3) {
+ /* No options */
+ }
+
+ domid = find_domain(argv[optind]);
+ ctrl = atoi(argv[optind+1]);
+ port = atoi(argv[optind+2]);
+
+ if (argc - optind > 3) {
+ fprintf(stderr, "Invalid arguments.\n");
+ return 1;
+ }
+
+ libxl_device_usb_init(&usb);
+ if (libxl_ctrlport_to_device_usb(ctx, domid, ctrl, port, &usb)) {
+ fprintf(stderr, "Unknown device at controller %d port %d.\n",
+ ctrl, port);
+ return 1;
+ }
+
+ rc = libxl_device_usb_remove(ctx, domid, &usb, 0);
+ if (rc) {
+ fprintf(stderr, "libxl_device_usb_remove failed.\n");
+ rc = 1;
+ }
+
+ libxl_device_usb_dispose(&usb);
+ return rc;
+}
+
+int main_usblist(int argc, char **argv)
+{
+ uint32_t domid;
+ libxl_device_usbctrl *usbctrls;
+ libxl_usbctrlinfo usbctrlinfo;
+ int numctrl, i, j, opt;
+
+ SWITCH_FOREACH_OPT(opt, "", NULL, "usb-list", 1) {
+ /* No options */
+ }
+
+ domid = find_domain(argv[optind++]);
+
+ if (argc > optind) {
+ fprintf(stderr, "Invalid arguments.\n");
+ exit(-1);
+ }
+
+ usbctrls = libxl_device_usbctrl_list(ctx, domid, &numctrl);
+ if (!usbctrls) {
+ return 0;
+ }
+
+ for (i = 0; i < numctrl; ++i) {
+ printf("%-6s %-6s %-3s %-5s %-7s %-5s %-30s\n",
+ "Devid", "Type", "BE", "state", "usb-ver", "ports", "BE-path");
+
+ libxl_usbctrlinfo_init(&usbctrlinfo);
+
+ if (!libxl_device_usbctrl_getinfo(ctx, domid,
+ &usbctrls[i], &usbctrlinfo)) {
+ printf("%-6d %-6s %-3d %-5d %-7d %-5d %-30s\n",
+ usbctrlinfo.devid,
+ libxl_usbctrl_type_to_string(usbctrlinfo.type),
+ usbctrlinfo.backend_id, usbctrlinfo.state,
+ usbctrlinfo.version, usbctrlinfo.ports,
+ usbctrlinfo.backend);
+
+ for (j = 1; j <= usbctrlinfo.ports; j++) {
+ libxl_device_usb usb;
+
+ libxl_device_usb_init(&usb);
+
+ printf(" Port %d:", j);
+
+ if (!libxl_ctrlport_to_device_usb(ctx, domid,
+ usbctrlinfo.devid, j, &usb)) {
+ printf(" Bus %03x Device %03x\n",
+ usb.u.hostdev.hostbus, usb.u.hostdev.hostaddr);
+ } else {
+ printf("\n");
+ }
+
+ libxl_device_usb_dispose(&usb);
+ }
+ }
+
+ libxl_usbctrlinfo_dispose(&usbctrlinfo);
+ }
+
+ libxl_device_usbctrl_list_free(usbctrls, numctrl);
+ return 0;
+}
+
int main_console(int argc, char **argv)
{
uint32_t domid;
diff --git a/tools/libxl/xl_cmdtable.c b/tools/libxl/xl_cmdtable.c
index 0071f12..c7231ae 100644
--- a/tools/libxl/xl_cmdtable.c
+++ b/tools/libxl/xl_cmdtable.c
@@ -551,6 +551,31 @@ struct cmd_spec cmd_table[] = {
},
#endif
+ { "usbctrl-attach",
+ &main_usbctrl_attach, 0, 1,
+ "Create a virtual USB controller for a domain",
+ "<Domain> [type=pv] [version=<version>] [ports=<number>]",
+ },
+ { "usbctrl-detach",
+ &main_usbctrl_detach, 0, 1,
+ "Remove the virtual USB controller specified by <DevId> for a domain",
+ "<Domain> <DevId>",
+ },
+ { "usb-attach",
+ &main_usbattach, 0, 1,
+ "Attach a USB device to a domain",
+ "<Domain> hostbus=<busnum> hostaddr=<devnum> [controller=<DevId> [port=<port>]]",
+ },
+ { "usb-detach",
+ &main_usbdetach, 0, 1,
+ "Detach a USB device from a domain",
+ "<Domain> <controller> <port>",
+ },
+ { "usb-list",
+ &main_usblist, 0, 0,
+ "List information about USB devices for a domain",
+ "<Domain>",
+ },
};
int cmdtable_len = sizeof(cmd_table)/sizeof(struct cmd_spec);
--
2.1.4
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH V9 7/7] domcreate: support pvusb in configuration file
2015-11-24 8:35 [PATCH V9 0/7] xen pvusb toolstack work Chunyan Liu
` (5 preceding siblings ...)
2015-11-24 8:35 ` [PATCH V9 6/7] xl: add usb-assignable-list command Chunyan Liu
@ 2015-11-24 8:35 ` Chunyan Liu
2015-11-25 9:19 ` [PATCH V9 0/7] xen pvusb toolstack work Chun Yan Liu
7 siblings, 0 replies; 10+ messages in thread
From: Chunyan Liu @ 2015-11-24 8:35 UTC (permalink / raw)
To: xen-devel
Cc: jgross, wei.liu2, ian.campbell, george.dunlap, Ian.Jackson,
Chunyan Liu, jfehlig, Simon Cao
Add code to support pvusb in domain config file. One could specify
usbctrl and usb in domain's configuration file and create domain,
then usb controllers will be created and usb device would be attached
to guest automatically.
One could specify usb controllers and usb devices in config file
like this:
usbctrl=['version=2,ports=4', 'version=1, ports=4', ]
usbdev=['hostbus=2, hostaddr=1, controller=0,port=1', ]
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Simon Cao <caobosimon@gmail.com>
---
changes:
- doc update
Not changed in this version:
- naming 'usbdev' or 'usb' for usb device.
If decided, all places including libxl API and all in this patch
should be changed all together. See how we decide.
docs/man/xl.cfg.pod.5 | 84 ++++++++++++++++++++++++++++++++++++++++++++
tools/libxl/libxl_create.c | 73 ++++++++++++++++++++++++++++++++++++--
tools/libxl/libxl_device.c | 4 +++
tools/libxl/libxl_internal.h | 8 +++++
tools/libxl/xl_cmdimpl.c | 54 +++++++++++++++++++++++++++-
5 files changed, 219 insertions(+), 4 deletions(-)
diff --git a/docs/man/xl.cfg.pod.5 b/docs/man/xl.cfg.pod.5
index b63846a..db00371 100644
--- a/docs/man/xl.cfg.pod.5
+++ b/docs/man/xl.cfg.pod.5
@@ -722,6 +722,90 @@ Note this may be overridden by rdm_policy option in PCI device configuration.
=back
+=item B<usbctrl=[ "USBCTRL_SPEC_STRING", "USBCTRL_SPEC_STRING", ... ]>
+
+Specifies the USB controllers created for this guest. Each
+B<USB_SPEC_STRING> has the form C<KEY=VALUE,KEY=VALUE,...> where:
+
+=over 4
+
+=item B<KEY=VALUE>
+
+Possible B<KEY>s are:
+
+=over 4
+
+=item B<type=TYPE>
+
+Specifies the usb controller type. Currently only 'pv' and 'auto'
+are supported.
+
+=item B<version=VERSION>
+
+Specifies the usb controller version. Possible values include
+1 (USB1.1) and 2 (USB2.0). Default is 2 (USB2.0).
+
+=item B<ports=PORTS>
+
+Specifies the total ports of the usb controller. The maximum
+number is 31. Default is 8.
+
+USB controler ids start from 0. In line with the USB spec, however,
+ports on a controller start from 1.
+
+E.g.
+usbctrl=["version=1,ports=4", "version=2,ports=8",]
+The first controller has:
+controller id = 0, and port 1,2,3,4.
+The second controller has:
+controller id = 1, and port 1,2,3,4,5,6,7,8.
+
+=back
+
+=back
+
+=item B<usbdev=[ "USB_SPEC_STRING", "USB_SPEC_STRING", ... ]>
+
+Specifiec the USB devices to be attached to the guest at boot. Each
+B<USB_SPEC_STRING> has the form C<KEY=VALUE,KEY=VALUE,...> where:
+
+=over 4
+
+=item B<KEY=VALUE>
+
+Possible B<KEY>s are:
+
+=over 4
+
+=item B<devtype=hostdev>
+
+Specifies USB device type. Currently only support 'hostdev'.
+
+=item B<hostbus=busnum>
+
+Specifies busnum of the USB device from the host perspective.
+
+=item B<hostaddr=devnum>
+
+Specifies devnum of the USB device from the host perspective.
+
+=item B<controller=CONTROLLER>
+
+Specifies USB controller id, to which controller the USB device is attached.
+
+=item B<port=PORT>
+
+Specifies USB port, to which port the USB device is attached. B<port=PORT>
+is valid only when B<controller=CONTROLLER> is specified.
+
+=back
+
+If no controller is specified, an available controller:port combination
+will be used. If there are no available controller:port options,
+a new controller will be created.
+
+=back
+
=item B<pci=[ "PCI_SPEC_STRING", "PCI_SPEC_STRING", ... ]>
Specifies the host PCI devices to passthrough to this guest. Each B<PCI_SPEC_STRING>
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index f0fee00..f817187 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -727,6 +727,10 @@ static void domcreate_launch_dm(libxl__egc *egc, libxl__multidev *aodevs,
static void domcreate_attach_vtpms(libxl__egc *egc, libxl__multidev *multidev,
int ret);
+static void domcreate_attach_usbctrls(libxl__egc *egc,
+ libxl__multidev *multidev, int ret);
+static void domcreate_attach_usbs(libxl__egc *egc, libxl__multidev *multidev,
+ int ret);
static void domcreate_attach_pci(libxl__egc *egc, libxl__multidev *aodevs,
int ret);
static void domcreate_attach_dtdev(libxl__egc *egc,
@@ -1385,13 +1389,13 @@ static void domcreate_attach_vtpms(libxl__egc *egc,
if (d_config->num_vtpms > 0) {
/* Attach vtpms */
libxl__multidev_begin(ao, &dcs->multidev);
- dcs->multidev.callback = domcreate_attach_pci;
+ dcs->multidev.callback = domcreate_attach_usbctrls;
libxl__add_vtpms(egc, ao, domid, d_config, &dcs->multidev);
libxl__multidev_prepared(egc, &dcs->multidev, 0);
return;
}
- domcreate_attach_pci(egc, multidev, 0);
+ domcreate_attach_usbctrls(egc, multidev, 0);
return;
error_out:
@@ -1399,6 +1403,69 @@ error_out:
domcreate_complete(egc, dcs, ret);
}
+static void domcreate_attach_usbctrls(libxl__egc *egc,
+ libxl__multidev *multidev, int ret)
+{
+ libxl__domain_create_state *dcs = CONTAINER_OF(multidev, *dcs, multidev);
+ STATE_AO_GC(dcs->ao);
+ int domid = dcs->guest_domid;
+
+ libxl_domain_config *const d_config = dcs->guest_config;
+
+ if (ret) {
+ LOG(ERROR, "unable to add vtpm devices");
+ goto error_out;
+ }
+
+ if (d_config->num_usbctrls > 0) {
+ /* Attach usbctrls */
+ libxl__multidev_begin(ao, &dcs->multidev);
+ dcs->multidev.callback = domcreate_attach_usbs;
+ libxl__add_usbctrls(egc, ao, domid, d_config, &dcs->multidev);
+ libxl__multidev_prepared(egc, &dcs->multidev, 0);
+ return;
+ }
+
+ domcreate_attach_usbs(egc, multidev, 0);
+ return;
+
+error_out:
+ assert(ret);
+ domcreate_complete(egc, dcs, ret);
+}
+
+
+static void domcreate_attach_usbs(libxl__egc *egc, libxl__multidev *multidev,
+ int ret)
+{
+ libxl__domain_create_state *dcs = CONTAINER_OF(multidev, *dcs, multidev);
+ STATE_AO_GC(dcs->ao);
+ int domid = dcs->guest_domid;
+
+ libxl_domain_config *const d_config = dcs->guest_config;
+
+ if (ret) {
+ LOG(ERROR, "unable to add usbctrl devices");
+ goto error_out;
+ }
+
+ if (d_config->num_usbs > 0) {
+ /* Attach usbctrls */
+ libxl__multidev_begin(ao, &dcs->multidev);
+ dcs->multidev.callback = domcreate_attach_pci;
+ libxl__add_usbs(egc, ao, domid, d_config, &dcs->multidev);
+ libxl__multidev_prepared(egc, &dcs->multidev, 0);
+ return;
+ }
+
+ domcreate_attach_pci(egc, multidev, 0);
+ return;
+
+error_out:
+ assert(ret);
+ domcreate_complete(egc, dcs, ret);
+}
+
static void domcreate_attach_pci(libxl__egc *egc, libxl__multidev *multidev,
int ret)
{
@@ -1411,7 +1478,7 @@ static void domcreate_attach_pci(libxl__egc *egc, libxl__multidev *multidev,
libxl_domain_config *const d_config = dcs->guest_config;
if (ret) {
- LOG(ERROR, "unable to add vtpm devices");
+ LOG(ERROR, "unable to add usb devices");
goto error_out;
}
diff --git a/tools/libxl/libxl_device.c b/tools/libxl/libxl_device.c
index 6715c16..0ede029 100644
--- a/tools/libxl/libxl_device.c
+++ b/tools/libxl/libxl_device.c
@@ -544,6 +544,8 @@ void libxl__multidev_prepared(libxl__egc *egc,
* libxl__add_disks
* libxl__add_nics
* libxl__add_vtpms
+ * libxl__add_usbctrls
+ * libxl__add_usbs
*/
#define DEFINE_DEVICES_ADD(type) \
@@ -563,6 +565,8 @@ void libxl__multidev_prepared(libxl__egc *egc,
DEFINE_DEVICES_ADD(disk)
DEFINE_DEVICES_ADD(nic)
DEFINE_DEVICES_ADD(vtpm)
+DEFINE_DEVICES_ADD(usbctrl)
+DEFINE_DEVICES_ADD(usb)
#undef DEFINE_DEVICES_ADD
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index b2c4173..4143c3f 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -3302,6 +3302,14 @@ _hidden void libxl__add_vtpms(libxl__egc *egc, libxl__ao *ao, uint32_t domid,
libxl_domain_config *d_config,
libxl__multidev *multidev);
+_hidden void libxl__add_usbctrls(libxl__egc *egc, libxl__ao *ao,
+ uint32_t domid, libxl_domain_config *d_config,
+ libxl__multidev *multidev);
+
+_hidden void libxl__add_usbs(libxl__egc *egc, libxl__ao *ao,
+ uint32_t domid, libxl_domain_config *d_config,
+ libxl__multidev *multidev);
+
/*----- device model creation -----*/
/* First layer; wraps libxl__spawn_spawn. */
diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
index 5043f25..ced3749 100644
--- a/tools/libxl/xl_cmdimpl.c
+++ b/tools/libxl/xl_cmdimpl.c
@@ -1315,7 +1315,8 @@ static void parse_config_data(const char *config_source,
const char *buf;
long l, vcpus = 0;
XLU_Config *config;
- XLU_ConfigList *cpus, *vbds, *nics, *pcis, *cvfbs, *cpuids, *vtpms;
+ XLU_ConfigList *cpus, *vbds, *nics, *pcis, *cvfbs, *cpuids, *vtpms,
+ *usbctrls, *usbs;
XLU_ConfigList *channels, *ioports, *irqs, *iomem, *viridian, *dtdevs;
int num_ioports, num_irqs, num_iomem, num_cpus, num_viridian;
int pci_power_mgmt = 0;
@@ -2132,6 +2133,57 @@ skip_vfb:
}
}
+ if (!xlu_cfg_get_list(config, "usbctrl", &usbctrls, 0, 0)) {
+ d_config->num_usbctrls = 0;
+ d_config->usbctrls = NULL;
+ while ((buf = xlu_cfg_get_listitem(usbctrls, d_config->num_usbctrls))
+ != NULL) {
+ libxl_device_usbctrl *usbctrl;
+ char *buf2 = strdup(buf);
+ char *p;
+
+ usbctrl = ARRAY_EXTEND_INIT(d_config->usbctrls,
+ d_config->num_usbctrls,
+ libxl_device_usbctrl_init);
+ p = strtok(buf2, ",");
+ if (!p)
+ goto skip_usbctrl;
+ do {
+ while (*p == ' ')
+ p++;
+ if (parse_usbctrl_config(usbctrl, p))
+ exit(1);
+ } while ((p = strtok(NULL, ",")) != NULL);
+skip_usbctrl:
+ free(buf2);
+ }
+ }
+
+ if (!xlu_cfg_get_list(config, "usbdev", &usbs, 0, 0)) {
+ d_config->num_usbs = 0;
+ d_config->usbs = NULL;
+ while ((buf = xlu_cfg_get_listitem(usbs, d_config->num_usbs)) != NULL) {
+ libxl_device_usb *usb;
+ char *buf2 = strdup(buf);
+ char *p;
+
+ usb = ARRAY_EXTEND_INIT_NODEVID(d_config->usbs,
+ d_config->num_usbs,
+ libxl_device_usb_init);
+ p = strtok(buf2, ",");
+ if (!p)
+ goto skip_usb;
+ do {
+ while (*p == ' ')
+ p++;
+ if (parse_usb_config(usb, p))
+ exit(1);
+ } while ((p = strtok(NULL, ",")) != NULL);
+skip_usb:
+ free(buf2);
+ }
+ }
+
switch (xlu_cfg_get_list(config, "cpuid", &cpuids, 0, 1)) {
case 0:
{
--
2.1.4
^ permalink raw reply related [flat|nested] 10+ messages in thread