From: Kishon Vijay Abraham I <kishon@ti.com>
To: kishon@ti.com, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org
Cc: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
rogerq@ti.com, nsekhar@ti.com, linux-pci@vger.kernel.org,
linux-usb@vger.kernel.org, tony@atomide.com, t-kristo@ti.com
Subject: [PATCH v3 1/9] phy: ti-pipe3: introduce local struct device* in probe
Date: Tue, 15 Dec 2015 14:46:00 +0530 [thread overview]
Message-ID: <1450170968-11282-2-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1450170968-11282-1-git-send-email-kishon@ti.com>
No functional change. Introduce local struct device pointer in
probe and replace using &pdev->dev/phy->dev with the local
device pointer. This is in preparation to split ti_pipe3_probe
and add separate functions for getting mem resource, getting
sysctrl and getting clocks.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/phy/phy-ti-pipe3.c | 54 ++++++++++++++++++++++----------------------
1 file changed, 27 insertions(+), 27 deletions(-)
diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
index 93bc112..c511105 100644
--- a/drivers/phy/phy-ti-pipe3.c
+++ b/drivers/phy/phy-ti-pipe3.c
@@ -319,40 +319,41 @@ static int ti_pipe3_probe(struct platform_device *pdev)
struct platform_device *control_pdev;
const struct of_device_id *match;
struct clk *clk;
+ struct device *dev = &pdev->dev;
- phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
if (!phy)
return -ENOMEM;
- phy->dev = &pdev->dev;
+ phy->dev = dev;
if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
- match = of_match_device(ti_pipe3_id_table, &pdev->dev);
+ match = of_match_device(ti_pipe3_id_table, dev);
if (!match)
return -EINVAL;
phy->dpll_map = (struct pipe3_dpll_map *)match->data;
if (!phy->dpll_map) {
- dev_err(&pdev->dev, "no DPLL data\n");
+ dev_err(dev, "no DPLL data\n");
return -EINVAL;
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"pll_ctrl");
- phy->pll_ctrl_base = devm_ioremap_resource(&pdev->dev, res);
+ phy->pll_ctrl_base = devm_ioremap_resource(dev, res);
if (IS_ERR(phy->pll_ctrl_base))
return PTR_ERR(phy->pll_ctrl_base);
- phy->sys_clk = devm_clk_get(phy->dev, "sysclk");
+ phy->sys_clk = devm_clk_get(dev, "sysclk");
if (IS_ERR(phy->sys_clk)) {
- dev_err(&pdev->dev, "unable to get sysclk\n");
+ dev_err(dev, "unable to get sysclk\n");
return -EINVAL;
}
}
- phy->refclk = devm_clk_get(phy->dev, "refclk");
+ phy->refclk = devm_clk_get(dev, "refclk");
if (IS_ERR(phy->refclk)) {
- dev_err(&pdev->dev, "unable to get refclk\n");
+ dev_err(dev, "unable to get refclk\n");
/* older DTBs have missing refclk in SATA PHY
* so don't bail out in case of SATA PHY.
*/
@@ -361,9 +362,9 @@ static int ti_pipe3_probe(struct platform_device *pdev)
}
if (!of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
- phy->wkupclk = devm_clk_get(phy->dev, "wkupclk");
+ phy->wkupclk = devm_clk_get(dev, "wkupclk");
if (IS_ERR(phy->wkupclk)) {
- dev_err(&pdev->dev, "unable to get wkupclk\n");
+ dev_err(dev, "unable to get wkupclk\n");
return PTR_ERR(phy->wkupclk);
}
} else {
@@ -371,14 +372,14 @@ static int ti_pipe3_probe(struct platform_device *pdev)
phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node,
"syscon-pllreset");
if (IS_ERR(phy->dpll_reset_syscon)) {
- dev_info(&pdev->dev,
+ dev_info(dev,
"can't get syscon-pllreset, sata dpll won't idle\n");
phy->dpll_reset_syscon = NULL;
} else {
if (of_property_read_u32_index(node,
"syscon-pllreset", 1,
&phy->dpll_reset_reg)) {
- dev_err(&pdev->dev,
+ dev_err(dev,
"couldn't get pllreset reg. offset\n");
return -EINVAL;
}
@@ -387,30 +388,30 @@ static int ti_pipe3_probe(struct platform_device *pdev)
if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
- clk = devm_clk_get(phy->dev, "dpll_ref");
+ clk = devm_clk_get(dev, "dpll_ref");
if (IS_ERR(clk)) {
- dev_err(&pdev->dev, "unable to get dpll ref clk\n");
+ dev_err(dev, "unable to get dpll ref clk\n");
return PTR_ERR(clk);
}
clk_set_rate(clk, 1500000000);
- clk = devm_clk_get(phy->dev, "dpll_ref_m2");
+ clk = devm_clk_get(dev, "dpll_ref_m2");
if (IS_ERR(clk)) {
- dev_err(&pdev->dev, "unable to get dpll ref m2 clk\n");
+ dev_err(dev, "unable to get dpll ref m2 clk\n");
return PTR_ERR(clk);
}
clk_set_rate(clk, 100000000);
- clk = devm_clk_get(phy->dev, "phy-div");
+ clk = devm_clk_get(dev, "phy-div");
if (IS_ERR(clk)) {
- dev_err(&pdev->dev, "unable to get phy-div clk\n");
+ dev_err(dev, "unable to get phy-div clk\n");
return PTR_ERR(clk);
}
clk_set_rate(clk, 100000000);
- phy->div_clk = devm_clk_get(phy->dev, "div-clk");
+ phy->div_clk = devm_clk_get(dev, "div-clk");
if (IS_ERR(phy->div_clk)) {
- dev_err(&pdev->dev, "unable to get div-clk\n");
+ dev_err(dev, "unable to get div-clk\n");
return PTR_ERR(phy->div_clk);
}
} else {
@@ -419,13 +420,13 @@ static int ti_pipe3_probe(struct platform_device *pdev)
control_node = of_parse_phandle(node, "ctrl-module", 0);
if (!control_node) {
- dev_err(&pdev->dev, "Failed to get control device phandle\n");
+ dev_err(dev, "Failed to get control device phandle\n");
return -EINVAL;
}
control_pdev = of_find_device_by_node(control_node);
if (!control_pdev) {
- dev_err(&pdev->dev, "Failed to get control device\n");
+ dev_err(dev, "Failed to get control device\n");
return -EINVAL;
}
@@ -434,7 +435,7 @@ static int ti_pipe3_probe(struct platform_device *pdev)
omap_control_phy_power(phy->control_dev, 0);
platform_set_drvdata(pdev, phy);
- pm_runtime_enable(phy->dev);
+ pm_runtime_enable(dev);
/*
* Prevent auto-disable of refclk for SATA PHY due to Errata i783
@@ -446,13 +447,12 @@ static int ti_pipe3_probe(struct platform_device *pdev)
}
}
- generic_phy = devm_phy_create(phy->dev, NULL, &ops);
+ generic_phy = devm_phy_create(dev, NULL, &ops);
if (IS_ERR(generic_phy))
return PTR_ERR(generic_phy);
phy_set_drvdata(generic_phy, phy);
- phy_provider = devm_of_phy_provider_register(phy->dev,
- of_phy_simple_xlate);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
if (IS_ERR(phy_provider))
return PTR_ERR(phy_provider);
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: <kishon@ti.com>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>
Cc: <robh+dt@kernel.org>, <pawel.moll@arm.com>,
<mark.rutland@arm.com>, <ijc+devicetree@hellion.org.uk>,
<galak@codeaurora.org>, <rogerq@ti.com>, <nsekhar@ti.com>,
<linux-pci@vger.kernel.org>, <linux-usb@vger.kernel.org>,
<tony@atomide.com>, <t-kristo@ti.com>
Subject: [PATCH v3 1/9] phy: ti-pipe3: introduce local struct device* in probe
Date: Tue, 15 Dec 2015 14:46:00 +0530 [thread overview]
Message-ID: <1450170968-11282-2-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1450170968-11282-1-git-send-email-kishon@ti.com>
No functional change. Introduce local struct device pointer in
probe and replace using &pdev->dev/phy->dev with the local
device pointer. This is in preparation to split ti_pipe3_probe
and add separate functions for getting mem resource, getting
sysctrl and getting clocks.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/phy/phy-ti-pipe3.c | 54 ++++++++++++++++++++++----------------------
1 file changed, 27 insertions(+), 27 deletions(-)
diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
index 93bc112..c511105 100644
--- a/drivers/phy/phy-ti-pipe3.c
+++ b/drivers/phy/phy-ti-pipe3.c
@@ -319,40 +319,41 @@ static int ti_pipe3_probe(struct platform_device *pdev)
struct platform_device *control_pdev;
const struct of_device_id *match;
struct clk *clk;
+ struct device *dev = &pdev->dev;
- phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
if (!phy)
return -ENOMEM;
- phy->dev = &pdev->dev;
+ phy->dev = dev;
if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
- match = of_match_device(ti_pipe3_id_table, &pdev->dev);
+ match = of_match_device(ti_pipe3_id_table, dev);
if (!match)
return -EINVAL;
phy->dpll_map = (struct pipe3_dpll_map *)match->data;
if (!phy->dpll_map) {
- dev_err(&pdev->dev, "no DPLL data\n");
+ dev_err(dev, "no DPLL data\n");
return -EINVAL;
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"pll_ctrl");
- phy->pll_ctrl_base = devm_ioremap_resource(&pdev->dev, res);
+ phy->pll_ctrl_base = devm_ioremap_resource(dev, res);
if (IS_ERR(phy->pll_ctrl_base))
return PTR_ERR(phy->pll_ctrl_base);
- phy->sys_clk = devm_clk_get(phy->dev, "sysclk");
+ phy->sys_clk = devm_clk_get(dev, "sysclk");
if (IS_ERR(phy->sys_clk)) {
- dev_err(&pdev->dev, "unable to get sysclk\n");
+ dev_err(dev, "unable to get sysclk\n");
return -EINVAL;
}
}
- phy->refclk = devm_clk_get(phy->dev, "refclk");
+ phy->refclk = devm_clk_get(dev, "refclk");
if (IS_ERR(phy->refclk)) {
- dev_err(&pdev->dev, "unable to get refclk\n");
+ dev_err(dev, "unable to get refclk\n");
/* older DTBs have missing refclk in SATA PHY
* so don't bail out in case of SATA PHY.
*/
@@ -361,9 +362,9 @@ static int ti_pipe3_probe(struct platform_device *pdev)
}
if (!of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
- phy->wkupclk = devm_clk_get(phy->dev, "wkupclk");
+ phy->wkupclk = devm_clk_get(dev, "wkupclk");
if (IS_ERR(phy->wkupclk)) {
- dev_err(&pdev->dev, "unable to get wkupclk\n");
+ dev_err(dev, "unable to get wkupclk\n");
return PTR_ERR(phy->wkupclk);
}
} else {
@@ -371,14 +372,14 @@ static int ti_pipe3_probe(struct platform_device *pdev)
phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node,
"syscon-pllreset");
if (IS_ERR(phy->dpll_reset_syscon)) {
- dev_info(&pdev->dev,
+ dev_info(dev,
"can't get syscon-pllreset, sata dpll won't idle\n");
phy->dpll_reset_syscon = NULL;
} else {
if (of_property_read_u32_index(node,
"syscon-pllreset", 1,
&phy->dpll_reset_reg)) {
- dev_err(&pdev->dev,
+ dev_err(dev,
"couldn't get pllreset reg. offset\n");
return -EINVAL;
}
@@ -387,30 +388,30 @@ static int ti_pipe3_probe(struct platform_device *pdev)
if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
- clk = devm_clk_get(phy->dev, "dpll_ref");
+ clk = devm_clk_get(dev, "dpll_ref");
if (IS_ERR(clk)) {
- dev_err(&pdev->dev, "unable to get dpll ref clk\n");
+ dev_err(dev, "unable to get dpll ref clk\n");
return PTR_ERR(clk);
}
clk_set_rate(clk, 1500000000);
- clk = devm_clk_get(phy->dev, "dpll_ref_m2");
+ clk = devm_clk_get(dev, "dpll_ref_m2");
if (IS_ERR(clk)) {
- dev_err(&pdev->dev, "unable to get dpll ref m2 clk\n");
+ dev_err(dev, "unable to get dpll ref m2 clk\n");
return PTR_ERR(clk);
}
clk_set_rate(clk, 100000000);
- clk = devm_clk_get(phy->dev, "phy-div");
+ clk = devm_clk_get(dev, "phy-div");
if (IS_ERR(clk)) {
- dev_err(&pdev->dev, "unable to get phy-div clk\n");
+ dev_err(dev, "unable to get phy-div clk\n");
return PTR_ERR(clk);
}
clk_set_rate(clk, 100000000);
- phy->div_clk = devm_clk_get(phy->dev, "div-clk");
+ phy->div_clk = devm_clk_get(dev, "div-clk");
if (IS_ERR(phy->div_clk)) {
- dev_err(&pdev->dev, "unable to get div-clk\n");
+ dev_err(dev, "unable to get div-clk\n");
return PTR_ERR(phy->div_clk);
}
} else {
@@ -419,13 +420,13 @@ static int ti_pipe3_probe(struct platform_device *pdev)
control_node = of_parse_phandle(node, "ctrl-module", 0);
if (!control_node) {
- dev_err(&pdev->dev, "Failed to get control device phandle\n");
+ dev_err(dev, "Failed to get control device phandle\n");
return -EINVAL;
}
control_pdev = of_find_device_by_node(control_node);
if (!control_pdev) {
- dev_err(&pdev->dev, "Failed to get control device\n");
+ dev_err(dev, "Failed to get control device\n");
return -EINVAL;
}
@@ -434,7 +435,7 @@ static int ti_pipe3_probe(struct platform_device *pdev)
omap_control_phy_power(phy->control_dev, 0);
platform_set_drvdata(pdev, phy);
- pm_runtime_enable(phy->dev);
+ pm_runtime_enable(dev);
/*
* Prevent auto-disable of refclk for SATA PHY due to Errata i783
@@ -446,13 +447,12 @@ static int ti_pipe3_probe(struct platform_device *pdev)
}
}
- generic_phy = devm_phy_create(phy->dev, NULL, &ops);
+ generic_phy = devm_phy_create(dev, NULL, &ops);
if (IS_ERR(generic_phy))
return PTR_ERR(generic_phy);
phy_set_drvdata(generic_phy, phy);
- phy_provider = devm_of_phy_provider_register(phy->dev,
- of_phy_simple_xlate);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
if (IS_ERR(phy_provider))
return PTR_ERR(phy_provider);
--
1.7.9.5
next prev parent reply other threads:[~2015-12-15 9:16 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-15 9:15 [PATCH v3 0/9] phy: use syscon framework APIs to set ctrl mod reg Kishon Vijay Abraham I
2015-12-15 9:15 ` Kishon Vijay Abraham I
2015-12-15 9:16 ` Kishon Vijay Abraham I [this message]
2015-12-15 9:16 ` [PATCH v3 1/9] phy: ti-pipe3: introduce local struct device* in probe Kishon Vijay Abraham I
2015-12-15 9:16 ` [PATCH v3 2/9] phy: ti-pipe3: move clk initialization to a separate function Kishon Vijay Abraham I
2015-12-15 9:16 ` Kishon Vijay Abraham I
[not found] ` <1450170968-11282-1-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2015-12-15 9:16 ` [PATCH v3 3/9] phy: ti-pipe3: move sysctrl " Kishon Vijay Abraham I
2015-12-15 9:16 ` Kishon Vijay Abraham I
2015-12-15 9:16 ` [PATCH v3 4/9] phy: ti-pipe3: move mem resource " Kishon Vijay Abraham I
2015-12-15 9:16 ` Kishon Vijay Abraham I
2015-12-15 9:16 ` [PATCH v3 5/9] phy: ti-pipe3: use ti_pipe3_power_off to power off the PHY during probe Kishon Vijay Abraham I
2015-12-15 9:16 ` Kishon Vijay Abraham I
2015-12-15 9:16 ` [PATCH v3 6/9] phy: ti-pipe3: use *syscon* framework API to power on/off the PHY Kishon Vijay Abraham I
2015-12-15 9:16 ` Kishon Vijay Abraham I
2015-12-20 3:38 ` Rob Herring
2015-12-21 8:36 ` Kishon Vijay Abraham I
2015-12-21 8:36 ` Kishon Vijay Abraham I
2015-12-15 9:16 ` [PATCH v3 7/9] phy: ti-pipe3: use *syscon* framework API to set PCS value of " Kishon Vijay Abraham I
2015-12-15 9:16 ` Kishon Vijay Abraham I
2015-12-20 3:38 ` Rob Herring
2015-12-15 9:16 ` [PATCH v3 8/9] phy: omap-usb2: use omap_usb_power_off to power off the PHY during probe Kishon Vijay Abraham I
2015-12-15 9:16 ` Kishon Vijay Abraham I
2015-12-15 9:16 ` [PATCH v3 9/9] phy: omap-usb2: use *syscon* framework API to power on/off the PHY Kishon Vijay Abraham I
2015-12-15 9:16 ` Kishon Vijay Abraham I
2015-12-20 3:39 ` Rob Herring
2015-12-20 12:07 ` Kishon Vijay Abraham I
2015-12-20 12:07 ` Kishon Vijay Abraham I
[not found] ` <56769A1F.3060607-l0cyMroinI0@public.gmane.org>
2015-12-22 18:19 ` Rob Herring
2015-12-22 18:19 ` Rob Herring
2015-12-15 10:56 ` [PATCH v3 0/9] phy: use syscon framework APIs to set ctrl mod reg Arnd Bergmann
2015-12-15 11:14 ` Kishon Vijay Abraham I
2015-12-15 11:14 ` Kishon Vijay Abraham I
2015-12-15 11:55 ` Arnd Bergmann
2015-12-15 12:46 ` Kishon Vijay Abraham I
2015-12-15 12:46 ` Kishon Vijay Abraham I
[not found] ` <56700BC0.7020007-l0cyMroinI0@public.gmane.org>
2015-12-15 15:26 ` Tony Lindgren
2015-12-15 15:26 ` Tony Lindgren
2015-12-18 10:16 ` Kishon Vijay Abraham I
2015-12-18 10:16 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450170968-11282-2-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=nsekhar@ti.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=rogerq@ti.com \
--cc=t-kristo@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.