From: Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
Thierry Reding
<thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Alexandre Courbot
<gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Olof Johansson <olofj-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH] ARM64: tegra: Add support for Google Pixel C
Date: Wed, 6 Jan 2016 09:40:22 +0000 [thread overview]
Message-ID: <1452073222-2956-1-git-send-email-jonathanh@nvidia.com> (raw)
Add initial device-tree support for Google Pixel C (a.k.a. Smaug) based
upon Tegra210 SoC with 3 GiB of LPDDR4 RAM.
Signed-off-by: Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
arch/arm64/boot/dts/nvidia/Makefile | 1 +
arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 42 +++++++++++++++++++++++++++
2 files changed, 43 insertions(+)
create mode 100644 arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile
index a7e865da1005..0f7cdf3e05c1 100644
--- a/arch/arm64/boot/dts/nvidia/Makefile
+++ b/arch/arm64/boot/dts/nvidia/Makefile
@@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2571.dtb
+dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb
always := $(dtb-y)
clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
new file mode 100644
index 000000000000..a7474f5fcbcc
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
@@ -0,0 +1,42 @@
+/dts-v1/;
+
+#include "tegra210.dtsi"
+
+/ {
+ model = "Google Pixel C";
+ compatible = "google,smaug-rev8", "google,smaug-rev7",
+ "google,smaug-rev6", "google,smaug-rev5",
+ "google,smaug-rev4", "google,smaug-rev3",
+ "google,smaug-rev1", "google,smaug", "nvidia,tegra210";
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0xc0000000>;
+ };
+
+ serial@0,70006000 {
+ status = "okay";
+ };
+
+ pmc@0,7000e400 {
+ nvidia,invert-interrupt;
+ nvidia,suspend-mode = <0>;
+ nvidia,cpu-pwr-good-time = <0>;
+ nvidia,cpu-pwr-off-time = <0>;
+ nvidia,core-pwr-good-time = <12000 6000>;
+ nvidia,core-pwr-off-time = <39053>;
+ nvidia,core-power-req-active-high;
+ nvidia,sys-clock-req-active-high;
+ status = "okay";
+ };
+
+ sdhci@0,700b0600 {
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+ };
+};
--
2.1.4
WARNING: multiple messages have this Message-ID (diff)
From: jonathanh@nvidia.com (Jon Hunter)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM64: tegra: Add support for Google Pixel C
Date: Wed, 6 Jan 2016 09:40:22 +0000 [thread overview]
Message-ID: <1452073222-2956-1-git-send-email-jonathanh@nvidia.com> (raw)
Add initial device-tree support for Google Pixel C (a.k.a. Smaug) based
upon Tegra210 SoC with 3 GiB of LPDDR4 RAM.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
---
arch/arm64/boot/dts/nvidia/Makefile | 1 +
arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 42 +++++++++++++++++++++++++++
2 files changed, 43 insertions(+)
create mode 100644 arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile
index a7e865da1005..0f7cdf3e05c1 100644
--- a/arch/arm64/boot/dts/nvidia/Makefile
+++ b/arch/arm64/boot/dts/nvidia/Makefile
@@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2571.dtb
+dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb
always := $(dtb-y)
clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
new file mode 100644
index 000000000000..a7474f5fcbcc
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
@@ -0,0 +1,42 @@
+/dts-v1/;
+
+#include "tegra210.dtsi"
+
+/ {
+ model = "Google Pixel C";
+ compatible = "google,smaug-rev8", "google,smaug-rev7",
+ "google,smaug-rev6", "google,smaug-rev5",
+ "google,smaug-rev4", "google,smaug-rev3",
+ "google,smaug-rev1", "google,smaug", "nvidia,tegra210";
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0xc0000000>;
+ };
+
+ serial at 0,70006000 {
+ status = "okay";
+ };
+
+ pmc at 0,7000e400 {
+ nvidia,invert-interrupt;
+ nvidia,suspend-mode = <0>;
+ nvidia,cpu-pwr-good-time = <0>;
+ nvidia,cpu-pwr-off-time = <0>;
+ nvidia,core-pwr-good-time = <12000 6000>;
+ nvidia,core-pwr-off-time = <39053>;
+ nvidia,core-power-req-active-high;
+ nvidia,sys-clock-req-active-high;
+ status = "okay";
+ };
+
+ sdhci at 0,700b0600 {
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+ };
+};
--
2.1.4
next reply other threads:[~2016-01-06 9:40 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-06 9:40 Jon Hunter [this message]
2016-01-06 9:40 ` [PATCH] ARM64: tegra: Add support for Google Pixel C Jon Hunter
[not found] ` <1452073222-2956-1-git-send-email-jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-01-06 9:46 ` Mark Rutland
2016-01-06 9:46 ` Mark Rutland
2016-01-06 12:49 ` Jon Hunter
2016-01-06 12:49 ` Jon Hunter
[not found] ` <568D0D70.4020309-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-01-07 13:19 ` Jon Hunter
2016-01-07 13:19 ` Jon Hunter
[not found] ` <568E65F0.2070201-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-01-07 14:11 ` Arnd Bergmann
2016-01-07 14:11 ` Arnd Bergmann
2016-01-07 16:53 ` Jon Hunter
2016-01-07 16:53 ` Jon Hunter
[not found] ` <568E9804.5020503-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-01-07 17:20 ` Rob Herring
2016-01-07 17:20 ` Rob Herring
[not found] ` <CAL_Jsq++DkgJA--40YBqGZd5BJFkzXfKt_st1kN+ZiVY7yb8OA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-01-07 18:00 ` Jon Hunter
2016-01-07 18:00 ` Jon Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1452073222-2956-1-git-send-email-jonathanh@nvidia.com \
--to=jonathanh-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=olofj-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
--cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.