From: jszhang@marvell.com (Jisheng Zhang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 4/4] net: mvneta: update clocks property and document additional clock-names
Date: Wed, 20 Jan 2016 19:27:25 +0800 [thread overview]
Message-ID: <1453289245-2061-5-git-send-email-jszhang@marvell.com> (raw)
In-Reply-To: <1453289245-2061-1-git-send-email-jszhang@marvell.com>
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
---
Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
index aeea50c..d0cb869 100644
--- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
+++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
@@ -6,12 +6,17 @@ Required properties:
- interrupts: interrupt for the device
- phy: See ethernet.txt file in the same directory.
- phy-mode: See ethernet.txt file in the same directory
-- clocks: a pointer to the reference clock for this device.
+- clocks: List of clocks for this device. At least one clock is
+ mandatory for the core clock. If several clocks are given, then the
+ clock-names property must be used to identify them.
Optional properties:
- tx-csum-limit: maximum mtu supported by port that allow TX checksum.
Value is presented in bytes. If not used, by default 1600B is set for
"marvell,armada-370-neta" and 9800B for others.
+- clock-names: List of names corresponding to clocks property; shall be
+ "core" for core clock and "bus" for the optional bus clock.
+
Example:
--
2.7.0.rc3
WARNING: multiple messages have this Message-ID (diff)
From: Jisheng Zhang <jszhang@marvell.com>
To: thomas.petazzoni@free-electrons.com, davem@davemloft.net,
mw@semihalf.com, robh+dt@kernel.org, pawel.moll@arm.com,
mark.rutland@arm.com, ijc+devicetree@hellion.org.uk,
galak@codeaurora.org, sebastian.hesselbarth@gmail.com
Cc: Jisheng Zhang <jszhang@marvell.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org
Subject: [PATCH v3 4/4] net: mvneta: update clocks property and document additional clock-names
Date: Wed, 20 Jan 2016 19:27:25 +0800 [thread overview]
Message-ID: <1453289245-2061-5-git-send-email-jszhang@marvell.com> (raw)
In-Reply-To: <1453289245-2061-1-git-send-email-jszhang@marvell.com>
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
---
Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
index aeea50c..d0cb869 100644
--- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
+++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
@@ -6,12 +6,17 @@ Required properties:
- interrupts: interrupt for the device
- phy: See ethernet.txt file in the same directory.
- phy-mode: See ethernet.txt file in the same directory
-- clocks: a pointer to the reference clock for this device.
+- clocks: List of clocks for this device. At least one clock is
+ mandatory for the core clock. If several clocks are given, then the
+ clock-names property must be used to identify them.
Optional properties:
- tx-csum-limit: maximum mtu supported by port that allow TX checksum.
Value is presented in bytes. If not used, by default 1600B is set for
"marvell,armada-370-neta" and 9800B for others.
+- clock-names: List of names corresponding to clocks property; shall be
+ "core" for core clock and "bus" for the optional bus clock.
+
Example:
--
2.7.0.rc3
WARNING: multiple messages have this Message-ID (diff)
From: Jisheng Zhang <jszhang@marvell.com>
To: <thomas.petazzoni@free-electrons.com>, <davem@davemloft.net>,
<mw@semihalf.com>, <robh+dt@kernel.org>, <pawel.moll@arm.com>,
<mark.rutland@arm.com>, <ijc+devicetree@hellion.org.uk>,
<galak@codeaurora.org>, <sebastian.hesselbarth@gmail.com>
Cc: <devicetree@vger.kernel.org>, <netdev@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Jisheng Zhang <jszhang@marvell.com>
Subject: [PATCH v3 4/4] net: mvneta: update clocks property and document additional clock-names
Date: Wed, 20 Jan 2016 19:27:25 +0800 [thread overview]
Message-ID: <1453289245-2061-5-git-send-email-jszhang@marvell.com> (raw)
In-Reply-To: <1453289245-2061-1-git-send-email-jszhang@marvell.com>
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
---
Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
index aeea50c..d0cb869 100644
--- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
+++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
@@ -6,12 +6,17 @@ Required properties:
- interrupts: interrupt for the device
- phy: See ethernet.txt file in the same directory.
- phy-mode: See ethernet.txt file in the same directory
-- clocks: a pointer to the reference clock for this device.
+- clocks: List of clocks for this device. At least one clock is
+ mandatory for the core clock. If several clocks are given, then the
+ clock-names property must be used to identify them.
Optional properties:
- tx-csum-limit: maximum mtu supported by port that allow TX checksum.
Value is presented in bytes. If not used, by default 1600B is set for
"marvell,armada-370-neta" and 9800B for others.
+- clock-names: List of names corresponding to clocks property; shall be
+ "core" for core clock and "bus" for the optional bus clock.
+
Example:
--
2.7.0.rc3
WARNING: multiple messages have this Message-ID (diff)
From: Jisheng Zhang <jszhang@marvell.com>
To: <thomas.petazzoni@free-electrons.com>, <davem@davemloft.net>,
<mw@semihalf.com>, <robh+dt@kernel.org>, <pawel.moll@arm.com>,
<mark.rutland@arm.com>, <ijc+devicetree@hellion.org.uk>,
<galak@codeaurora.org>, <sebastian.hesselbarth@gmail.com>
Cc: Jisheng Zhang <jszhang@marvell.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org
Subject: [PATCH v3 4/4] net: mvneta: update clocks property and document additional clock-names
Date: Wed, 20 Jan 2016 19:27:25 +0800 [thread overview]
Message-ID: <1453289245-2061-5-git-send-email-jszhang@marvell.com> (raw)
In-Reply-To: <1453289245-2061-1-git-send-email-jszhang@marvell.com>
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
---
Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
index aeea50c..d0cb869 100644
--- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
+++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
@@ -6,12 +6,17 @@ Required properties:
- interrupts: interrupt for the device
- phy: See ethernet.txt file in the same directory.
- phy-mode: See ethernet.txt file in the same directory
-- clocks: a pointer to the reference clock for this device.
+- clocks: List of clocks for this device. At least one clock is
+ mandatory for the core clock. If several clocks are given, then the
+ clock-names property must be used to identify them.
Optional properties:
- tx-csum-limit: maximum mtu supported by port that allow TX checksum.
Value is presented in bytes. If not used, by default 1600B is set for
"marvell,armada-370-neta" and 9800B for others.
+- clock-names: List of names corresponding to clocks property; shall be
+ "core" for core clock and "bus" for the optional bus clock.
+
Example:
--
2.7.0.rc3
next prev parent reply other threads:[~2016-01-20 11:27 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-20 11:27 [PATCH v3 0/4] net: mvneta: support more than one clk Jisheng Zhang
2016-01-20 11:27 ` Jisheng Zhang
2016-01-20 11:27 ` Jisheng Zhang
2016-01-20 11:27 ` Jisheng Zhang
2016-01-20 11:27 ` [PATCH v3 1/4] net: mvneta: sort the headers in alphabetic order Jisheng Zhang
2016-01-20 11:27 ` Jisheng Zhang
2016-01-20 11:27 ` Jisheng Zhang
2016-01-20 11:27 ` Jisheng Zhang
2016-01-20 11:27 ` [PATCH v3 2/4] net: mvneta: Try to get named core clock first Jisheng Zhang
2016-01-20 11:27 ` Jisheng Zhang
2016-01-20 11:27 ` Jisheng Zhang
2016-01-20 11:27 ` Jisheng Zhang
2016-01-20 11:27 ` [PATCH v3 3/4] net: mvneta: get optional bus clk Jisheng Zhang
2016-01-20 11:27 ` Jisheng Zhang
2016-01-20 11:27 ` Jisheng Zhang
2016-01-20 11:27 ` Jisheng Zhang
2016-01-20 11:27 ` Jisheng Zhang [this message]
2016-01-20 11:27 ` [PATCH v3 4/4] net: mvneta: update clocks property and document additional clock-names Jisheng Zhang
2016-01-20 11:27 ` Jisheng Zhang
2016-01-20 11:27 ` Jisheng Zhang
2016-01-20 16:29 ` Rob Herring
2016-01-20 16:29 ` Rob Herring
2016-01-21 20:05 ` [PATCH v3 0/4] net: mvneta: support more than one clk David Miller
2016-01-21 20:05 ` David Miller
2016-01-21 20:05 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453289245-2061-5-git-send-email-jszhang@marvell.com \
--to=jszhang@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.