From: "Andrew F. Davis" <afd@ti.com>
To: Philipp Zabel <p.zabel@pengutronix.de>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>, Suman Anna <s-anna@ti.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
"Andrew F. Davis" <afd@ti.com>
Subject: [PATCH 0/2] Add support for SYSCON reset
Date: Mon, 25 Jan 2016 13:02:42 -0600 [thread overview]
Message-ID: <1453748564-6429-1-git-send-email-afd@ti.com> (raw)
Some SoCs contain reset controls for modules that are memory-mapped to
areas shared with other module configuration settings. This requires
synchronization across all drivers accessing this memory area. This
series adds a generic SYSCON reset driver to allow resets toggled
by bits in memory-mapped registers through SYSCON.
Andrew F. Davis (2):
Documentation: dt: reset: Add syscon reset binding
reset: add a SYSCON based reset driver
.../devicetree/bindings/reset/syscon-reset.txt | 84 +++++++
drivers/reset/Kconfig | 10 +
drivers/reset/Makefile | 1 +
drivers/reset/reset-syscon.c | 259 +++++++++++++++++++++
4 files changed, 354 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/syscon-reset.txt
create mode 100644 drivers/reset/reset-syscon.c
--
2.7.0
WARNING: multiple messages have this Message-ID (diff)
From: "Andrew F. Davis" <afd@ti.com>
To: Philipp Zabel <p.zabel@pengutronix.de>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>, Suman Anna <s-anna@ti.com>
Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
"Andrew F. Davis" <afd@ti.com>
Subject: [PATCH 0/2] Add support for SYSCON reset
Date: Mon, 25 Jan 2016 13:02:42 -0600 [thread overview]
Message-ID: <1453748564-6429-1-git-send-email-afd@ti.com> (raw)
Some SoCs contain reset controls for modules that are memory-mapped to
areas shared with other module configuration settings. This requires
synchronization across all drivers accessing this memory area. This
series adds a generic SYSCON reset driver to allow resets toggled
by bits in memory-mapped registers through SYSCON.
Andrew F. Davis (2):
Documentation: dt: reset: Add syscon reset binding
reset: add a SYSCON based reset driver
.../devicetree/bindings/reset/syscon-reset.txt | 84 +++++++
drivers/reset/Kconfig | 10 +
drivers/reset/Makefile | 1 +
drivers/reset/reset-syscon.c | 259 +++++++++++++++++++++
4 files changed, 354 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/syscon-reset.txt
create mode 100644 drivers/reset/reset-syscon.c
--
2.7.0
next reply other threads:[~2016-01-25 19:02 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-25 19:02 Andrew F. Davis [this message]
2016-01-25 19:02 ` [PATCH 0/2] Add support for SYSCON reset Andrew F. Davis
2016-01-25 19:02 ` [PATCH 1/2] Documentation: dt: reset: Add syscon reset binding Andrew F. Davis
2016-01-25 19:02 ` Andrew F. Davis
2016-01-29 3:22 ` Rob Herring
2016-02-02 15:23 ` Andrew F. Davis
2016-02-02 15:23 ` Andrew F. Davis
2016-02-02 16:44 ` Philipp Zabel
2016-02-02 19:25 ` Andrew F. Davis
2016-02-02 19:25 ` Andrew F. Davis
[not found] ` <56B102B4.1010000-l0cyMroinI0@public.gmane.org>
2016-02-04 15:49 ` Philipp Zabel
2016-02-04 15:49 ` Philipp Zabel
[not found] ` <1454600979.3356.68.camel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2016-02-07 16:39 ` Andrew F. Davis
2016-02-07 16:39 ` Andrew F. Davis
2016-01-25 19:02 ` [PATCH 2/2] reset: add a SYSCON based reset driver Andrew F. Davis
2016-01-25 19:02 ` Andrew F. Davis
2016-01-25 22:07 ` kbuild test robot
2016-01-25 22:07 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453748564-6429-1-git-send-email-afd@ti.com \
--to=afd@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=p.zabel@pengutronix.de \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=s-anna@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.