From: Stephen Boyd <sboyd@codeaurora.org>
To: Mike Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 06/14] clk: divider: Add hw based registration APIs
Date: Mon, 8 Feb 2016 17:45:33 -0800 [thread overview]
Message-ID: <1454982341-22715-7-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1454982341-22715-1-git-send-email-sboyd@codeaurora.org>
Add registration APIs in the clk divider code to return struct
clk_hw pointers instead of struct clk pointers. This way we hide
the struct clk pointer from providers unless they need to use
consumer facing APIs.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/clk-divider.c | 91 ++++++++++++++++++++++++++++++++++++++++----
include/linux/clk-provider.h | 10 +++++
2 files changed, 93 insertions(+), 8 deletions(-)
diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index ded3ff4b91b9..65ea60c32856 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -423,15 +423,16 @@ const struct clk_ops clk_divider_ops = {
};
EXPORT_SYMBOL_GPL(clk_divider_ops);
-static struct clk *_register_divider(struct device *dev, const char *name,
+static struct clk_hw *_register_divider(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
u8 clk_divider_flags, const struct clk_div_table *table,
spinlock_t *lock)
{
struct clk_divider *div;
- struct clk *clk;
+ struct clk_hw *hw;
struct clk_init_data init;
+ int ret;
if (clk_divider_flags & CLK_DIVIDER_HIWORD_MASK) {
if (width + shift > 16) {
@@ -461,12 +462,14 @@ static struct clk *_register_divider(struct device *dev, const char *name,
div->table = table;
/* register the clock */
- clk = clk_register(dev, &div->hw);
-
- if (IS_ERR(clk))
+ hw = &div->hw;
+ ret = clk_hw_register(dev, hw);
+ if (ret) {
kfree(div);
+ hw = ERR_PTR(ret);
+ }
- return clk;
+ return hw;
}
/**
@@ -486,12 +489,39 @@ struct clk *clk_register_divider(struct device *dev, const char *name,
void __iomem *reg, u8 shift, u8 width,
u8 clk_divider_flags, spinlock_t *lock)
{
- return _register_divider(dev, name, parent_name, flags, reg, shift,
+ struct clk_hw *hw;
+
+ hw = _register_divider(dev, name, parent_name, flags, reg, shift,
width, clk_divider_flags, NULL, lock);
+ if (IS_ERR(hw))
+ return ERR_CAST(hw);
+ return hw->clk;
}
EXPORT_SYMBOL_GPL(clk_register_divider);
/**
+ * clk_hw_register_divider - register a divider clock with the clock framework
+ * @dev: device registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @flags: framework-specific flags
+ * @reg: register address to adjust divider
+ * @shift: number of bits to shift the bitfield
+ * @width: width of the bitfield
+ * @clk_divider_flags: divider-specific flags for this clock
+ * @lock: shared register lock for this clock
+ */
+struct clk_hw *clk_hw_register_divider(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 shift, u8 width,
+ u8 clk_divider_flags, spinlock_t *lock)
+{
+ return _register_divider(dev, name, parent_name, flags, reg, shift,
+ width, clk_divider_flags, NULL, lock);
+}
+EXPORT_SYMBOL_GPL(clk_hw_register_divider);
+
+/**
* clk_register_divider_table - register a table based divider clock with
* the clock framework
* @dev: device registering this clock
@@ -511,11 +541,41 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name,
u8 clk_divider_flags, const struct clk_div_table *table,
spinlock_t *lock)
{
- return _register_divider(dev, name, parent_name, flags, reg, shift,
+ struct clk_hw *hw;
+
+ hw = _register_divider(dev, name, parent_name, flags, reg, shift,
width, clk_divider_flags, table, lock);
+ if (IS_ERR(hw))
+ return ERR_CAST(hw);
+ return hw->clk;
}
EXPORT_SYMBOL_GPL(clk_register_divider_table);
+/**
+ * clk_hw_register_divider_table - register a table based divider clock with
+ * the clock framework
+ * @dev: device registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @flags: framework-specific flags
+ * @reg: register address to adjust divider
+ * @shift: number of bits to shift the bitfield
+ * @width: width of the bitfield
+ * @clk_divider_flags: divider-specific flags for this clock
+ * @table: array of divider/value pairs ending with a div set to 0
+ * @lock: shared register lock for this clock
+ */
+struct clk_hw *clk_hw_register_divider_table(struct device *dev,
+ const char *name, const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 shift, u8 width,
+ u8 clk_divider_flags, const struct clk_div_table *table,
+ spinlock_t *lock)
+{
+ return _register_divider(dev, name, parent_name, flags, reg, shift,
+ width, clk_divider_flags, table, lock);
+}
+EXPORT_SYMBOL_GPL(clk_hw_register_divider_table);
+
void clk_unregister_divider(struct clk *clk)
{
struct clk_divider *div;
@@ -531,3 +591,18 @@ void clk_unregister_divider(struct clk *clk)
kfree(div);
}
EXPORT_SYMBOL_GPL(clk_unregister_divider);
+
+/**
+ * clk_hw_unregister_divider - unregister a clk divider
+ * @hw: hardware-specific clock data to unregister
+ */
+void clk_hw_unregister_divider(struct clk_hw *hw)
+{
+ struct clk_divider *div;
+
+ div = to_clk_divider(hw);
+
+ clk_hw_unregister(hw);
+ kfree(div);
+}
+EXPORT_SYMBOL_GPL(clk_hw_unregister_divider);
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 1af1afae05f8..666462958ef2 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -400,12 +400,22 @@ struct clk *clk_register_divider(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
u8 clk_divider_flags, spinlock_t *lock);
+struct clk_hw *clk_hw_register_divider(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 shift, u8 width,
+ u8 clk_divider_flags, spinlock_t *lock);
struct clk *clk_register_divider_table(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
u8 clk_divider_flags, const struct clk_div_table *table,
spinlock_t *lock);
+struct clk_hw *clk_hw_register_divider_table(struct device *dev,
+ const char *name, const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 shift, u8 width,
+ u8 clk_divider_flags, const struct clk_div_table *table,
+ spinlock_t *lock);
void clk_unregister_divider(struct clk *clk);
+void clk_hw_unregister_divider(struct clk_hw *hw);
/**
* struct clk_mux - multiplexer clock
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
WARNING: multiple messages have this Message-ID (diff)
From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 06/14] clk: divider: Add hw based registration APIs
Date: Mon, 8 Feb 2016 17:45:33 -0800 [thread overview]
Message-ID: <1454982341-22715-7-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1454982341-22715-1-git-send-email-sboyd@codeaurora.org>
Add registration APIs in the clk divider code to return struct
clk_hw pointers instead of struct clk pointers. This way we hide
the struct clk pointer from providers unless they need to use
consumer facing APIs.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/clk-divider.c | 91 ++++++++++++++++++++++++++++++++++++++++----
include/linux/clk-provider.h | 10 +++++
2 files changed, 93 insertions(+), 8 deletions(-)
diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index ded3ff4b91b9..65ea60c32856 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -423,15 +423,16 @@ const struct clk_ops clk_divider_ops = {
};
EXPORT_SYMBOL_GPL(clk_divider_ops);
-static struct clk *_register_divider(struct device *dev, const char *name,
+static struct clk_hw *_register_divider(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
u8 clk_divider_flags, const struct clk_div_table *table,
spinlock_t *lock)
{
struct clk_divider *div;
- struct clk *clk;
+ struct clk_hw *hw;
struct clk_init_data init;
+ int ret;
if (clk_divider_flags & CLK_DIVIDER_HIWORD_MASK) {
if (width + shift > 16) {
@@ -461,12 +462,14 @@ static struct clk *_register_divider(struct device *dev, const char *name,
div->table = table;
/* register the clock */
- clk = clk_register(dev, &div->hw);
-
- if (IS_ERR(clk))
+ hw = &div->hw;
+ ret = clk_hw_register(dev, hw);
+ if (ret) {
kfree(div);
+ hw = ERR_PTR(ret);
+ }
- return clk;
+ return hw;
}
/**
@@ -486,12 +489,39 @@ struct clk *clk_register_divider(struct device *dev, const char *name,
void __iomem *reg, u8 shift, u8 width,
u8 clk_divider_flags, spinlock_t *lock)
{
- return _register_divider(dev, name, parent_name, flags, reg, shift,
+ struct clk_hw *hw;
+
+ hw = _register_divider(dev, name, parent_name, flags, reg, shift,
width, clk_divider_flags, NULL, lock);
+ if (IS_ERR(hw))
+ return ERR_CAST(hw);
+ return hw->clk;
}
EXPORT_SYMBOL_GPL(clk_register_divider);
/**
+ * clk_hw_register_divider - register a divider clock with the clock framework
+ * @dev: device registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @flags: framework-specific flags
+ * @reg: register address to adjust divider
+ * @shift: number of bits to shift the bitfield
+ * @width: width of the bitfield
+ * @clk_divider_flags: divider-specific flags for this clock
+ * @lock: shared register lock for this clock
+ */
+struct clk_hw *clk_hw_register_divider(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 shift, u8 width,
+ u8 clk_divider_flags, spinlock_t *lock)
+{
+ return _register_divider(dev, name, parent_name, flags, reg, shift,
+ width, clk_divider_flags, NULL, lock);
+}
+EXPORT_SYMBOL_GPL(clk_hw_register_divider);
+
+/**
* clk_register_divider_table - register a table based divider clock with
* the clock framework
* @dev: device registering this clock
@@ -511,11 +541,41 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name,
u8 clk_divider_flags, const struct clk_div_table *table,
spinlock_t *lock)
{
- return _register_divider(dev, name, parent_name, flags, reg, shift,
+ struct clk_hw *hw;
+
+ hw = _register_divider(dev, name, parent_name, flags, reg, shift,
width, clk_divider_flags, table, lock);
+ if (IS_ERR(hw))
+ return ERR_CAST(hw);
+ return hw->clk;
}
EXPORT_SYMBOL_GPL(clk_register_divider_table);
+/**
+ * clk_hw_register_divider_table - register a table based divider clock with
+ * the clock framework
+ * @dev: device registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @flags: framework-specific flags
+ * @reg: register address to adjust divider
+ * @shift: number of bits to shift the bitfield
+ * @width: width of the bitfield
+ * @clk_divider_flags: divider-specific flags for this clock
+ * @table: array of divider/value pairs ending with a div set to 0
+ * @lock: shared register lock for this clock
+ */
+struct clk_hw *clk_hw_register_divider_table(struct device *dev,
+ const char *name, const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 shift, u8 width,
+ u8 clk_divider_flags, const struct clk_div_table *table,
+ spinlock_t *lock)
+{
+ return _register_divider(dev, name, parent_name, flags, reg, shift,
+ width, clk_divider_flags, table, lock);
+}
+EXPORT_SYMBOL_GPL(clk_hw_register_divider_table);
+
void clk_unregister_divider(struct clk *clk)
{
struct clk_divider *div;
@@ -531,3 +591,18 @@ void clk_unregister_divider(struct clk *clk)
kfree(div);
}
EXPORT_SYMBOL_GPL(clk_unregister_divider);
+
+/**
+ * clk_hw_unregister_divider - unregister a clk divider
+ * @hw: hardware-specific clock data to unregister
+ */
+void clk_hw_unregister_divider(struct clk_hw *hw)
+{
+ struct clk_divider *div;
+
+ div = to_clk_divider(hw);
+
+ clk_hw_unregister(hw);
+ kfree(div);
+}
+EXPORT_SYMBOL_GPL(clk_hw_unregister_divider);
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 1af1afae05f8..666462958ef2 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -400,12 +400,22 @@ struct clk *clk_register_divider(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
u8 clk_divider_flags, spinlock_t *lock);
+struct clk_hw *clk_hw_register_divider(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 shift, u8 width,
+ u8 clk_divider_flags, spinlock_t *lock);
struct clk *clk_register_divider_table(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
u8 clk_divider_flags, const struct clk_div_table *table,
spinlock_t *lock);
+struct clk_hw *clk_hw_register_divider_table(struct device *dev,
+ const char *name, const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 shift, u8 width,
+ u8 clk_divider_flags, const struct clk_div_table *table,
+ spinlock_t *lock);
void clk_unregister_divider(struct clk *clk);
+void clk_hw_unregister_divider(struct clk_hw *hw);
/**
* struct clk_mux - multiplexer clock
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2016-02-09 1:45 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-09 1:45 [PATCH 00/14] clk_hw based clkdev/DT providers Stephen Boyd
2016-02-09 1:45 ` Stephen Boyd
2016-02-09 1:45 ` [PATCH 01/14] mfd: intel_quark_i2c_gpio: Use clkdev_create() Stephen Boyd
2016-02-09 1:45 ` Stephen Boyd
2016-02-10 16:23 ` Lee Jones
2016-02-10 16:23 ` Lee Jones
2016-02-10 18:35 ` Stephen Boyd
2016-02-10 18:35 ` Stephen Boyd
2016-02-11 9:09 ` Lee Jones
2016-02-11 9:09 ` Lee Jones
2016-02-11 11:08 ` Lee Jones
2016-02-11 11:08 ` Lee Jones
2016-02-15 15:14 ` Andy Shevchenko
2016-02-15 15:14 ` Andy Shevchenko
2016-02-15 22:13 ` Michael Turquette
2016-02-15 22:13 ` Michael Turquette
2016-02-15 22:13 ` Michael Turquette
2016-02-09 1:45 ` [PATCH 02/14] clkdev: Remove clk_register_clkdevs() Stephen Boyd
2016-02-09 1:45 ` Stephen Boyd
2016-02-15 15:16 ` Andy Shevchenko
2016-02-15 15:16 ` Andy Shevchenko
2016-02-15 22:12 ` Michael Turquette
2016-02-15 22:12 ` Michael Turquette
2016-02-15 22:12 ` Michael Turquette
2016-02-09 1:45 ` [PATCH 03/14] clk: Add {devm_}clk_hw_{register,unregister}() APIs Stephen Boyd
2016-02-09 1:45 ` Stephen Boyd
2016-02-15 22:13 ` Michael Turquette
2016-02-15 22:13 ` Michael Turquette
2016-02-15 22:13 ` [PATCH 03/14] clk: Add {devm_}clk_hw_{register, unregister}() APIs Michael Turquette
2016-02-09 1:45 ` [PATCH 04/14] clk: Add clk_hw OF clk providers Stephen Boyd
2016-02-09 1:45 ` Stephen Boyd
2016-02-09 3:31 ` kbuild test robot
2016-02-09 3:31 ` kbuild test robot
2016-02-09 1:45 ` [PATCH 05/14] clkdev: Add clk_hw based registration APIs Stephen Boyd
2016-02-09 1:45 ` Stephen Boyd
2016-02-09 1:45 ` Stephen Boyd [this message]
2016-02-09 1:45 ` [PATCH 06/14] clk: divider: Add hw " Stephen Boyd
2016-02-09 1:45 ` [PATCH 07/14] clk: gate: " Stephen Boyd
2016-02-09 1:45 ` Stephen Boyd
2016-02-09 1:45 ` [PATCH 08/14] clk: mux: " Stephen Boyd
2016-02-09 1:45 ` Stephen Boyd
2016-02-09 1:45 ` [PATCH 09/14] clk: fixed-factor: " Stephen Boyd
2016-02-09 1:45 ` Stephen Boyd
2016-02-09 1:45 ` [PATCH 10/14] clk: fractional-divider: " Stephen Boyd
2016-02-09 1:45 ` Stephen Boyd
2016-02-09 1:45 ` [PATCH 11/14] clk: composite: " Stephen Boyd
2016-02-09 1:45 ` Stephen Boyd
2016-02-09 1:45 ` [PATCH 12/14] clk: gpio: " Stephen Boyd
2016-02-09 1:45 ` Stephen Boyd
2016-02-09 1:45 ` [PATCH 13/14] clk: fixed-rate: " Stephen Boyd
2016-02-09 1:45 ` Stephen Boyd
2016-02-09 1:45 ` [PATCH 14/14] clk: qcom: Migrate to clk_hw based registration and OF APIs Stephen Boyd
2016-02-09 1:45 ` Stephen Boyd
2016-02-09 5:30 ` kbuild test robot
2016-02-09 5:30 ` kbuild test robot
2016-02-09 8:01 ` kbuild test robot
2016-02-09 8:01 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454982341-22715-7-git-send-email-sboyd@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.