All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas Huth <thuth@redhat.com>
To: qemu-ppc@nongnu.org, david@gibson.dropbear.id.au
Cc: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH v2 4/4] hw/ppc/spapr: Implement the h_page_init hypercall
Date: Thu, 11 Feb 2016 13:47:21 +0100	[thread overview]
Message-ID: <1455194841-4283-5-git-send-email-thuth@redhat.com> (raw)
In-Reply-To: <1455194841-4283-1-git-send-email-thuth@redhat.com>

This hypercall either initializes a page with zeros, or copies
another page.
According to LoPAPR, the i-cache of the page should also be
flushed if using H_ICACHE_INVALIDATE or H_ICACHE_SYNCHRONIZE,
and the d-cache should be synchronized to the RAM if the
H_ICACHE_SYNCHRONIZE flag is used. For this, two new macros
are introduced, kvmppc_dcbst() and kvmppc_icbi(), which use
the corresponding assembler instructions to flush the caches
if running with KVM on Power. If the code runs with TCG instead,
the code only uses tb_flush(), assuming that this will be
enough for synchronization.

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 hw/ppc/spapr_hcall.c | 70 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 target-ppc/kvm_ppc.h | 24 ++++++++++++++++--
 2 files changed, 92 insertions(+), 2 deletions(-)

diff --git a/hw/ppc/spapr_hcall.c b/hw/ppc/spapr_hcall.c
index 6e9b6be..b6d9eee 100644
--- a/hw/ppc/spapr_hcall.c
+++ b/hw/ppc/spapr_hcall.c
@@ -386,6 +386,75 @@ static target_ulong h_set_xdabr(PowerPCCPU *cpu, sPAPRMachineState *spapr,
     return H_SUCCESS;
 }
 
+static target_ulong h_page_init(PowerPCCPU *cpu, sPAPRMachineState *spapr,
+                                target_ulong opcode, target_ulong *args)
+{
+    CPUPPCState *env = &cpu->env;
+    target_ulong flags = args[0];
+    hwaddr dst = args[1];
+    hwaddr src = args[2];
+    hwaddr len = TARGET_PAGE_SIZE;
+    uint8_t *pdst, *psrc, *ptr;
+
+    if (flags & ~(H_ICACHE_SYNCHRONIZE | H_ICACHE_INVALIDATE
+                  | H_COPY_PAGE | H_ZERO_PAGE)) {
+        qemu_log_mask(LOG_UNIMP, "h_page_init: Bad flags (" TARGET_FMT_lx "\n",
+                      flags);
+        return H_PARAMETER;
+    }
+
+    if (!is_ram_address(spapr, dst) || (dst & ~TARGET_PAGE_MASK) != 0) {
+        return H_PARAMETER;
+    }
+
+    /* Map-in source */
+    if (flags & H_COPY_PAGE) {
+        if (!is_ram_address(spapr, src) || (src & ~TARGET_PAGE_MASK) != 0) {
+            return H_PARAMETER;
+        }
+        psrc = cpu_physical_memory_map(src, &len, 0);
+        if (!psrc || len != TARGET_PAGE_SIZE) {
+            return H_HARDWARE;
+        }
+    }
+
+    /* Map-in destination */
+    pdst = cpu_physical_memory_map(dst, &len, 1);
+    if (!pdst || len != TARGET_PAGE_SIZE) {
+        if (flags & H_COPY_PAGE) {
+            cpu_physical_memory_unmap(psrc, len, 0, 0);
+        }
+        return H_HARDWARE;
+    }
+
+    if (flags & H_ZERO_PAGE) {
+        memset(pdst, 0, len);
+    }
+    if (flags & H_COPY_PAGE) {
+        memcpy(pdst, psrc, len);
+        cpu_physical_memory_unmap(psrc, len, 0, len);
+    }
+
+    if (kvm_enabled() && (flags & H_ICACHE_SYNCHRONIZE) != 0) {
+        for (ptr = pdst; ptr < pdst + len; ptr += env->dcache_line_size) {
+            kvmppc_dcbst(ptr);
+        }
+    }
+
+    if (flags & (H_ICACHE_SYNCHRONIZE | H_ICACHE_INVALIDATE)) {
+        if (kvm_enabled()) {
+            for (ptr = pdst; ptr < pdst + len; ptr += env->icache_line_size) {
+                kvmppc_icbi(ptr);
+            }
+        } else {
+            tb_flush(CPU(cpu));
+        }
+    }
+
+    cpu_physical_memory_unmap(pdst, len, 1, len);
+    return H_SUCCESS;
+}
+
 #define FLAGS_REGISTER_VPA         0x0000200000000000ULL
 #define FLAGS_REGISTER_DTL         0x0000400000000000ULL
 #define FLAGS_REGISTER_SLBSHADOW   0x0000600000000000ULL
@@ -1045,6 +1114,7 @@ static void hypercall_register_types(void)
     spapr_register_hypercall(H_SET_SPRG0, h_set_sprg0);
     spapr_register_hypercall(H_SET_DABR, h_set_dabr);
     spapr_register_hypercall(H_SET_XDABR, h_set_xdabr);
+    spapr_register_hypercall(H_PAGE_INIT, h_page_init);
     spapr_register_hypercall(H_SET_MODE, h_set_mode);
 
     /* "debugger" hcalls (also used by SLOF). Note: We do -not- differenciate
diff --git a/target-ppc/kvm_ppc.h b/target-ppc/kvm_ppc.h
index 62406ce..2354aaf 100644
--- a/target-ppc/kvm_ppc.h
+++ b/target-ppc/kvm_ppc.h
@@ -254,15 +254,35 @@ static inline int kvmppc_enable_hwrng(void)
 #endif
 
 #ifndef CONFIG_KVM
+
 #define kvmppc_eieio() do { } while (0)
-#else
+#define kvmppc_dcbst(addr) do { } while (0)
+#define kvmppc_icbi(addr) do { } while (0)
+
+#else   /* CONFIG_KVM */
+
 #define kvmppc_eieio() \
     do {                                          \
         if (kvm_enabled()) {                          \
             asm volatile("eieio" : : : "memory"); \
         } \
     } while (0)
-#endif
+
+#define kvmppc_dcbst(addr) \
+    do { \
+        if (kvm_enabled()) { \
+            asm volatile("dcbst 0,%0" : : "r"(addr)); \
+        } \
+    } while (0)
+
+#define kvmppc_icbi(addr) \
+    do { \
+        if (kvm_enabled()) { \
+            asm volatile("icbi 0,%0" : : "r"(addr)); \
+        } \
+    } while (0)
+
+#endif  /* CONFIG_KVM */
 
 #ifndef KVM_INTERRUPT_SET
 #define KVM_INTERRUPT_SET -1
-- 
1.8.3.1

  parent reply	other threads:[~2016-02-11 12:47 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-11 12:47 [Qemu-devel] [PATCH v2 0/4] hw/ppc/spapr: Add "Processor Register Hypervisor Resource Access" H-calls Thomas Huth
2016-02-11 12:47 ` [Qemu-devel] [PATCH v2 1/4] hw/ppc/spapr: Add h_set_sprg0 hypercall Thomas Huth
2016-02-11 12:47 ` [Qemu-devel] [PATCH v2 2/4] hw/ppc/spapr: Implement h_set_dabr Thomas Huth
2016-02-11 12:47 ` [Qemu-devel] [PATCH v2 3/4] hw/ppc/spapr: Implement the h_set_xdabr hypercall Thomas Huth
2016-02-11 12:47 ` Thomas Huth [this message]
2016-02-12  0:43   ` [Qemu-devel] [PATCH v2 4/4] hw/ppc/spapr: Implement the h_page_init hypercall David Gibson
2016-02-12  0:31 ` [Qemu-devel] [PATCH v2 0/4] hw/ppc/spapr: Add "Processor Register Hypervisor Resource Access" H-calls David Gibson
2016-02-15 10:37   ` Thomas Huth

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1455194841-4283-5-git-send-email-thuth@redhat.com \
    --to=thuth@redhat.com \
    --cc=david@gibson.dropbear.id.au \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.