* [linux-sunxi][PATCH] ARM: dts: sun4i: Enable USB DRC on the MK8082
@ 2016-02-12 11:54 ` codekipper-Re5JQEeQqe8AvxtiuMwx3w
0 siblings, 0 replies; 4+ messages in thread
From: codekipper at gmail.com @ 2016-02-12 11:54 UTC (permalink / raw)
To: linux-arm-kernel
From: Marcus Cooper <codekipper@gmail.com>
Enable the otg/drc usb controller on the MK8082.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
arch/arm/boot/dts/sun4i-a10-mk802.dts | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts
index ddf0683..ee46ea8 100644
--- a/arch/arm/boot/dts/sun4i-a10-mk802.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts
@@ -44,6 +44,7 @@
#include "sun4i-a10.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "MK802";
@@ -84,7 +85,25 @@
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
+ usb0_id_detect_pin: usb0_id_detect_pin at 0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb0_vbus_detect_pin: usb0_vbus_detect_pin at 0 {
+ allwinner,pins = "PH5";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
usb2_vbus_pin_mk802: usb2_vbus_pin at 0 {
allwinner,pins = "PH12";
allwinner,function = "gpio_out";
@@ -93,6 +112,10 @@
};
};
+®_usb0_vbus {
+ status = "okay";
+};
+
®_usb1_vbus {
status = "okay";
};
@@ -109,7 +132,17 @@
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_vbus-supply = <®_usb0_vbus>;
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
status = "okay";
--
2.7.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH] ARM: dts: sun4i: Enable USB DRC on the MK8082
@ 2016-02-12 11:54 ` codekipper-Re5JQEeQqe8AvxtiuMwx3w
0 siblings, 0 replies; 4+ messages in thread
From: codekipper-Re5JQEeQqe8AvxtiuMwx3w @ 2016-02-12 11:54 UTC (permalink / raw)
To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Marcus Cooper
From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Enable the otg/drc usb controller on the MK8082.
Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/sun4i-a10-mk802.dts | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts
index ddf0683..ee46ea8 100644
--- a/arch/arm/boot/dts/sun4i-a10-mk802.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts
@@ -44,6 +44,7 @@
#include "sun4i-a10.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "MK802";
@@ -84,7 +85,25 @@
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ allwinner,pins = "PH5";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
usb2_vbus_pin_mk802: usb2_vbus_pin@0 {
allwinner,pins = "PH12";
allwinner,function = "gpio_out";
@@ -93,6 +112,10 @@
};
};
+®_usb0_vbus {
+ status = "okay";
+};
+
®_usb1_vbus {
status = "okay";
};
@@ -109,7 +132,17 @@
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_vbus-supply = <®_usb0_vbus>;
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
status = "okay";
--
2.7.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [linux-sunxi][PATCH] ARM: dts: sun4i: Enable USB DRC on the MK8082
@ 2016-02-12 12:00 ` Code Kipper
0 siblings, 0 replies; 4+ messages in thread
From: Code Kipper @ 2016-02-12 12:00 UTC (permalink / raw)
To: linux-arm-kernel
NAK...doohhh got the name of the device wrong in both subject and
description. V2 sent.
On 12 February 2016 at 12:54, <codekipper@gmail.com> wrote:
> From: Marcus Cooper <codekipper@gmail.com>
>
> Enable the otg/drc usb controller on the MK8082.
>
> Signed-off-by: Marcus Cooper <codekipper@gmail.com>
> ---
> arch/arm/boot/dts/sun4i-a10-mk802.dts | 33 +++++++++++++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts
> index ddf0683..ee46ea8 100644
> --- a/arch/arm/boot/dts/sun4i-a10-mk802.dts
> +++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts
> @@ -44,6 +44,7 @@
> #include "sun4i-a10.dtsi"
> #include "sunxi-common-regulators.dtsi"
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/pinctrl/sun4i-a10.h>
>
> / {
> model = "MK802";
> @@ -84,7 +85,25 @@
> status = "okay";
> };
>
> +&otg_sram {
> + status = "okay";
> +};
> +
> &pio {
> + usb0_id_detect_pin: usb0_id_detect_pin at 0 {
> + allwinner,pins = "PH4";
> + allwinner,function = "gpio_in";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + usb0_vbus_detect_pin: usb0_vbus_detect_pin at 0 {
> + allwinner,pins = "PH5";
> + allwinner,function = "gpio_in";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> usb2_vbus_pin_mk802: usb2_vbus_pin at 0 {
> allwinner,pins = "PH12";
> allwinner,function = "gpio_out";
> @@ -93,6 +112,10 @@
> };
> };
>
> +®_usb0_vbus {
> + status = "okay";
> +};
> +
> ®_usb1_vbus {
> status = "okay";
> };
> @@ -109,7 +132,17 @@
> status = "okay";
> };
>
> +&usb_otg {
> + dr_mode = "otg";
> + status = "okay";
> +};
> +
> &usbphy {
> + pinctrl-names = "default";
> + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
> + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
> + usb0_vbus-supply = <®_usb0_vbus>;
> usb1_vbus-supply = <®_usb1_vbus>;
> usb2_vbus-supply = <®_usb2_vbus>;
> status = "okay";
> --
> 2.7.1
>
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] ARM: dts: sun4i: Enable USB DRC on the MK8082
@ 2016-02-12 12:00 ` Code Kipper
0 siblings, 0 replies; 4+ messages in thread
From: Code Kipper @ 2016-02-12 12:00 UTC (permalink / raw)
To: Maxime Ripard; +Cc: linux-arm-kernel, devicetree, linux-sunxi, Marcus Cooper
NAK...doohhh got the name of the device wrong in both subject and
description. V2 sent.
On 12 February 2016 at 12:54, <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>
> Enable the otg/drc usb controller on the MK8082.
>
> Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
> arch/arm/boot/dts/sun4i-a10-mk802.dts | 33 +++++++++++++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts
> index ddf0683..ee46ea8 100644
> --- a/arch/arm/boot/dts/sun4i-a10-mk802.dts
> +++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts
> @@ -44,6 +44,7 @@
> #include "sun4i-a10.dtsi"
> #include "sunxi-common-regulators.dtsi"
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/pinctrl/sun4i-a10.h>
>
> / {
> model = "MK802";
> @@ -84,7 +85,25 @@
> status = "okay";
> };
>
> +&otg_sram {
> + status = "okay";
> +};
> +
> &pio {
> + usb0_id_detect_pin: usb0_id_detect_pin@0 {
> + allwinner,pins = "PH4";
> + allwinner,function = "gpio_in";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
> + allwinner,pins = "PH5";
> + allwinner,function = "gpio_in";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> usb2_vbus_pin_mk802: usb2_vbus_pin@0 {
> allwinner,pins = "PH12";
> allwinner,function = "gpio_out";
> @@ -93,6 +112,10 @@
> };
> };
>
> +®_usb0_vbus {
> + status = "okay";
> +};
> +
> ®_usb1_vbus {
> status = "okay";
> };
> @@ -109,7 +132,17 @@
> status = "okay";
> };
>
> +&usb_otg {
> + dr_mode = "otg";
> + status = "okay";
> +};
> +
> &usbphy {
> + pinctrl-names = "default";
> + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
> + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
> + usb0_vbus-supply = <®_usb0_vbus>;
> usb1_vbus-supply = <®_usb1_vbus>;
> usb2_vbus-supply = <®_usb2_vbus>;
> status = "okay";
> --
> 2.7.1
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-02-12 12:00 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-02-12 11:54 [linux-sunxi][PATCH] ARM: dts: sun4i: Enable USB DRC on the MK8082 codekipper at gmail.com
2016-02-12 11:54 ` [PATCH] " codekipper-Re5JQEeQqe8AvxtiuMwx3w
2016-02-12 12:00 ` [linux-sunxi][PATCH] " Code Kipper
2016-02-12 12:00 ` [PATCH] " Code Kipper
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.