[PATCH] ARM: dts: sun4i: Enable USB DRC on Hyundai-a7hd

All of lore.kernel.org
 help / color / mirror / Atom feed

From: peter@korsgaard.com (Peter Korsgaard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: sun4i: Enable USB DRC on Hyundai-a7hd
Date: Tue, 16 Feb 2016 22:00:04 +0100	[thread overview]
Message-ID: <1455656404-31191-1-git-send-email-peter@korsgaard.com> (raw)

Enable the OTG USB controller on the A7HD.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
---
 arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts | 34 ++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
index 43f58fb..9103864 100644
--- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
@@ -87,6 +87,30 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0_id_detect_pin at 0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin at 0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &reg_usb2_vbus {
 	gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
 	status = "okay";
@@ -102,7 +126,17 @@
 	allwinner,pins = "PH6";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
 };
-- 
2.1.4

WARNING: multiple messages have this Message-ID (diff)

From: Peter Korsgaard <peter-+2lRwdCCLRT2eFz/2MeuCQ@public.gmane.org>
To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
	hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
	Peter Korsgaard <peter-+2lRwdCCLRT2eFz/2MeuCQ@public.gmane.org>
Subject: [PATCH] ARM: dts: sun4i: Enable USB DRC on Hyundai-a7hd
Date: Tue, 16 Feb 2016 22:00:04 +0100	[thread overview]
Message-ID: <1455656404-31191-1-git-send-email-peter@korsgaard.com> (raw)

Enable the OTG USB controller on the A7HD.

Signed-off-by: Peter Korsgaard <peter-+2lRwdCCLRT2eFz/2MeuCQ@public.gmane.org>
---
 arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts | 34 ++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
index 43f58fb..9103864 100644
--- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
@@ -87,6 +87,30 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &reg_usb2_vbus {
 	gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
 	status = "okay";
@@ -102,7 +126,17 @@
 	allwinner,pins = "PH6";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
 };
-- 
2.1.4

next             reply	other threads:[~2016-02-16 21:00 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-16 21:00 Peter Korsgaard [this message]
2016-02-16 21:00 ` [PATCH] ARM: dts: sun4i: Enable USB DRC on Hyundai-a7hd Peter Korsgaard
2016-02-17 13:59 ` [linux-sunxi] " Hans de Goede
2016-02-17 13:59   ` Hans de Goede
2016-02-22  3:34 ` Maxime Ripard
2016-02-22  3:34   ` Maxime Ripard
2016-02-23 14:53 ` [linux-sunxi] " Hans de Goede
2016-02-23 14:53   ` Hans de Goede
2016-02-23 18:39   ` Peter Korsgaard
2016-02-23 18:39     ` Peter Korsgaard

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:43f58fb dfblob:9103864 dfblob:43f58fb dfblob:9103864 )
 OR (
bs:"[PATCH] ARM: dts: sun4i: Enable USB DRC on Hyundai-a7hd" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1455656404-31191-1-git-send-email-peter@korsgaard.com \
    --to=peter@korsgaard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.