From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Rob Herring <robherring2@gmail.com>
Cc: "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-fbdev@vger.kernel.org" <linux-fbdev@vger.kernel.org>,
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>,
dri-devel@lists.freedesktop.org,
SH-Linux <linux-sh@vger.kernel.org>
Subject: Re: [PATCH 03/16] video: Add DT binding documentation for VGA connector
Date: Wed, 27 Aug 2014 17:22:42 +0000 [thread overview]
Message-ID: <1455918.Ek46oPnquz@avalon> (raw)
In-Reply-To: <CAL_JsqLOzrgncpTa3SqMjc=XeYuvXhGrvk9dKA+Fgh_g_wycCA@mail.gmail.com>
Hi Rob,
On Wednesday 27 August 2014 12:12:36 Rob Herring wrote:
> On Wed, Aug 27, 2014 at 11:41 AM, Laurent Pinchart wrote:
> > The VGA connector is described by a single input port and an optional
> > DDC bus.
>
> Wasn't there a generic connector binding for DVI, HDMI, etc.?
As far as I know, there are three separate generic bindings for DVI
connectors, HDMI connectors, and analog TV connectors. The VGA connector
doesn't seem to really fit into one of those categories.
> > Cc: devicetree@vger.kernel.org
> > Cc: linux-fbdev@vger.kernel.org
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas@ideasonboard.com>
> > ---
> >
> > .../devicetree/bindings/video/vga-connector.txt | 28
> > ++++++++++++++++++++++ 1 file changed, 28 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/video/vga-connector.txt>
> > diff --git a/Documentation/devicetree/bindings/video/vga-connector.txt
> > b/Documentation/devicetree/bindings/video/vga-connector.txt new file mode
> > 100644
> > index 0000000..9a45ec1
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/video/vga-connector.txt
> > @@ -0,0 +1,28 @@
> > +VGA Connector
> > +=======
> > +
> > +Required properties:
> > +- compatible: "vga-connector"
> > +
> > +Optional properties:
> > +- label: a symbolic name for the connector
>
> ...which corresponds to hardware labels.
>
> > +- ddc-i2c-bus: phandle to the I2C bus that is connected to VGA DDC
> > +
> > +Required nodes:
> > +- Video port for VGA input
>
> A reference to the relevant video graph bindings should be added here.
I'll fix that.
> > +
> > +Example
> > +-------
> > +
> > +vga0: connector@0 {
> > + compatible = "vga-connector";
> > + label = "vga";
> > +
> > + ddc-i2c-bus = <&i2c3>;
> > +
> > + port {
> > + vga_connector_in: endpoint {
> > + remote-endpoint = <&adv7123_out>;
> > + };
> > + };
> > +};
--
Regards,
Laurent Pinchart
WARNING: multiple messages have this Message-ID (diff)
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Rob Herring <robherring2@gmail.com>
Cc: "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-fbdev@vger.kernel.org" <linux-fbdev@vger.kernel.org>,
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>,
dri-devel@lists.freedesktop.org,
SH-Linux <linux-sh@vger.kernel.org>
Subject: Re: [PATCH 03/16] video: Add DT binding documentation for VGA connector
Date: Wed, 27 Aug 2014 19:22:42 +0200 [thread overview]
Message-ID: <1455918.Ek46oPnquz@avalon> (raw)
In-Reply-To: <CAL_JsqLOzrgncpTa3SqMjc=XeYuvXhGrvk9dKA+Fgh_g_wycCA@mail.gmail.com>
Hi Rob,
On Wednesday 27 August 2014 12:12:36 Rob Herring wrote:
> On Wed, Aug 27, 2014 at 11:41 AM, Laurent Pinchart wrote:
> > The VGA connector is described by a single input port and an optional
> > DDC bus.
>
> Wasn't there a generic connector binding for DVI, HDMI, etc.?
As far as I know, there are three separate generic bindings for DVI
connectors, HDMI connectors, and analog TV connectors. The VGA connector
doesn't seem to really fit into one of those categories.
> > Cc: devicetree@vger.kernel.org
> > Cc: linux-fbdev@vger.kernel.org
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas@ideasonboard.com>
> > ---
> >
> > .../devicetree/bindings/video/vga-connector.txt | 28
> > ++++++++++++++++++++++ 1 file changed, 28 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/video/vga-connector.txt>
> > diff --git a/Documentation/devicetree/bindings/video/vga-connector.txt
> > b/Documentation/devicetree/bindings/video/vga-connector.txt new file mode
> > 100644
> > index 0000000..9a45ec1
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/video/vga-connector.txt
> > @@ -0,0 +1,28 @@
> > +VGA Connector
> > +==============
> > +
> > +Required properties:
> > +- compatible: "vga-connector"
> > +
> > +Optional properties:
> > +- label: a symbolic name for the connector
>
> ...which corresponds to hardware labels.
>
> > +- ddc-i2c-bus: phandle to the I2C bus that is connected to VGA DDC
> > +
> > +Required nodes:
> > +- Video port for VGA input
>
> A reference to the relevant video graph bindings should be added here.
I'll fix that.
> > +
> > +Example
> > +-------
> > +
> > +vga0: connector@0 {
> > + compatible = "vga-connector";
> > + label = "vga";
> > +
> > + ddc-i2c-bus = <&i2c3>;
> > +
> > + port {
> > + vga_connector_in: endpoint {
> > + remote-endpoint = <&adv7123_out>;
> > + };
> > + };
> > +};
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2014-08-27 17:22 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-27 16:40 [PATCH 00/16] R-Car Display Unit DT bindings Laurent Pinchart
2014-08-27 16:40 ` Laurent Pinchart
2014-08-27 16:40 ` [PATCH 01/16] devicetree: Add vendor prefix "mitsubishi" to vendor-prefixes.txt Laurent Pinchart
2014-08-27 16:40 ` Laurent Pinchart
2014-08-27 17:08 ` Rob Herring
2014-08-27 17:08 ` Rob Herring
2014-08-27 16:40 ` [PATCH 02/16] devicetree: Add vendor prefix "thine" " Laurent Pinchart
2014-08-27 16:40 ` Laurent Pinchart
2014-08-27 17:07 ` Rob Herring
2014-08-27 17:07 ` Rob Herring
2014-08-27 16:41 ` [PATCH 03/16] video: Add DT binding documentation for VGA connector Laurent Pinchart
2014-08-27 16:41 ` Laurent Pinchart
2014-08-27 17:12 ` Rob Herring
2014-08-27 17:12 ` Rob Herring
2014-08-27 17:22 ` Laurent Pinchart [this message]
2014-08-27 17:22 ` Laurent Pinchart
2014-09-15 8:52 ` Tomi Valkeinen
2014-09-15 8:52 ` Tomi Valkeinen
2014-08-27 16:41 ` [PATCH 04/16] video: Add ADV7123 DT bindings documentation Laurent Pinchart
2014-08-27 16:41 ` Laurent Pinchart
2014-08-27 16:41 ` [PATCH 05/16] video: Add THC63LVDM83D " Laurent Pinchart
2014-08-27 16:41 ` Laurent Pinchart
2014-08-27 16:41 ` [PATCH 06/16] video: Add DT bindings for the R-Car Display Unit Laurent Pinchart
2014-08-27 16:41 ` Laurent Pinchart
2014-08-27 16:41 ` [PATCH 07/16] drm/rcar-du: Use struct videomode in platform data Laurent Pinchart
2014-08-27 16:41 ` Laurent Pinchart
2014-08-27 16:41 ` [PATCH 08/16] drm/rcar-du: Add OF support Laurent Pinchart
2014-08-27 16:41 ` Laurent Pinchart
2014-08-27 16:41 ` [PATCH 09/16] ARM: shmobile: r8a7779: Add DU node to device tree Laurent Pinchart
2014-08-27 16:41 ` Laurent Pinchart
2014-08-27 16:41 ` [PATCH 10/16] ARM: shmobile: r8a7790: " Laurent Pinchart
2014-08-27 16:41 ` Laurent Pinchart
2014-08-27 16:41 ` [PATCH 11/16] ARM: shmobile: r8a7791: " Laurent Pinchart
2014-08-27 16:41 ` Laurent Pinchart
2014-08-27 16:41 ` [PATCH 12/16] ARM: shmobile: lager-reference: Remove DU platform device Laurent Pinchart
2014-08-27 16:41 ` Laurent Pinchart
2014-08-27 16:41 ` [PATCH 13/16] ARM: shmobile: koelsch-reference: " Laurent Pinchart
2014-08-27 16:41 ` Laurent Pinchart
2014-08-27 16:41 ` [PATCH 14/16] ARM: shmobile: marzen: Enable DU device in DT Laurent Pinchart
2014-08-27 16:41 ` Laurent Pinchart
2014-08-27 16:41 ` [PATCH 15/16] ARM: shmobile: lager: " Laurent Pinchart
2014-08-27 16:41 ` Laurent Pinchart
2014-08-27 16:41 ` [PATCH 16/16] ARM: shmobile: koelsch: " Laurent Pinchart
2014-08-27 16:41 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1455918.Ek46oPnquz@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=robherring2@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.