From: Priit Laes <plaes@plaes.org>
To: maxime.ripard@free-electrons.com,
Mike Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
David Airlie <airlied@linux.ie>,
Thierry Reding <thierry.reding@gmail.com>,
Philipp Zabel <p.zabel@pengutronix.de>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
dri-devel@lists.freedesktop.org, linux-sunxi@googlegroups.com,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Chen-Yu Tsai <wens@csie.org>, Hans de Goede <hdegoede@redhat.com>,
Alexander Kaplan <alex@nextthing.co>,
Boris Brezillon <boris.brezillon@free-electrons.com>,
Wynter Woods <wynter@nextthing.co>,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
Rob Clark <robdclark@gmail.com>, Daniel Vetter <daniel@ffwll.ch>
Subject: Re: [linux-sunxi] [PATCH v2 00/26] drm: Add Allwinner A10 display engine support
Date: Sat, 20 Feb 2016 15:45:41 +0200 [thread overview]
Message-ID: <1455975941.10551.3.camel@plaes.org> (raw)
In-Reply-To: <1452785109-6172-1-git-send-email-maxime.ripard@free-electrons.com>
On Thu, 2016-01-14 at 16:24 +0100, Maxime Ripard wrote:
> Hi everyone,
>
> The Allwinner SoCs (except for the very latest ones) all share the
> same set of controllers, loosely coupled together to form the display
> pipeline.
>
> Depending on the SoC, the number of instances of the controller will
> change (2 instances of each in the A10, only one in the A13, for
> example), and the output availables will change too (HDMI, composite,
> VGA on the A20, none of them on the A13).
>
> On most featured SoCs, it looks like that:
>
> +--------------------------------------------+
> | RAM |
> +--------------------------------------------+
> | | | |
> v | | v
> +----------------+ | | +----------------+
> | Frontend | | | | Frontend |
> +----------------+ | | +----------------+
> | | | |
> v | | v
> +----------------+ | | +----------------+
> | Backend |<+ +>| Backend |
> +----------------+ +----------------+
> | |
> v v
> +----------------+ +----------------+---> LVDS
> | TCON | | TCON |---> RGB
> +----------------+ +----------------+
> | +---+ +---+ |
> | | | |
> v v v v
> +------------+ +------------+ +------------+---> VGA
> | TV Encoder | | HDMI | | TV Encoder |---> Composite
> +------------+ +------------+ +------------+
>
> The current code only assumes that there is a single instance of all
> the controllers. It also supports only the RGB and Composite
> interfaces.
I found some time to play with it (with intention to get it running
also on sun7i and sun4i) and ran into this when trying to build
sun4i_drm as module:
ERROR: "sun4i_tcon1_mode_set" [drivers/gpu/drm/sun4i/sun4i_tv.ko] undefined!
ERROR: "sun4i_backend_apply_color_correction" [drivers/gpu/drm/sun4i/sun4i_tv.ko] undefined!
ERROR: "sun4i_tcon_channel_disable" [drivers/gpu/drm/sun4i/sun4i_tv.ko] undefined!
ERROR: "sun4i_tcon_channel_enable" [drivers/gpu/drm/sun4i/sun4i_tv.ko] undefined!
ERROR: "clk_unregister_composite" [drivers/gpu/drm/sun4i/sun4i_tcon.ko] undefined!
ERROR: "sun4i_rgb_init" [drivers/gpu/drm/sun4i/sun4i_tcon.ko] undefined!
ERROR: "clk_register_composite" [drivers/gpu/drm/sun4i/sun4i_tcon.ko] undefined!
ERROR: "sun4i_backend_update_layer_coord" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_backend_update_layer_formats" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_tcon_channel_disable" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_tcon_enable_vblank" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_backend_update_layer_buffer" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_backend_layer_enable" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_tcon_channel_enable" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_tcon_enable" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_tcon_disable" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_tcon0_mode_set" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_backend_commit" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
scripts/Makefile.modpost:91: recipe for target '__modpost' failed
>
> Let me know what you think,
> Maxime
>
> Changes from v1:
> - Rebased on top of 4.4
>
> - Merged the clock drivers for the display and TCON channel 0
> clocks
> - Replaced the container_of calls in the display reset clocks to an
> inline function
> - Checked the return code of of_clk_parent_fill in the clocks
> drivers
> - Checked the return code of of_clk_add_provider in the tcon-ch1
> and
> PLL3 clocks
> - Added missing clocks headers
> - Created a composite clock unregister function
>
> - Moved the binding documentation to
> Documentation/devicetree/bindings/display
> - Added the clocks binding documentation
> - Added the Olimex vendor to the list of DT vendors
> - Moved to the OF graph representation and the component framework
>
> - Moved the reset cells count check into the reset framework to
> avoid duplicating the code in every xlate implementation.
> - Made the reset_ops const
>
> - Reworked the DRM cmdline mode parsing code to allow named mode
> - Fixed the TV mode lookup when the mode name is not present (for
> example because it was given by the userspace)
>
> - Made the driver outputs optional (to avoid crashing when a board
> doesn't have either a panel or a composite output enabled)
> - Added multiple plane support with transparency
> - Moved the backend registers writes commit in the CRTC
> atomic_flush
> callback
> - Removed the load / unload functions
> - Removed the enabled booleans in my private structure and removed
> the implicit call to disable_unused_functions in the DRM core to
> push it in the drivers.
> - Fixed a few bitmasks on some bitfields definition
> - Fixed the RGB connector mode validation that was not testing the
> right values
>
> Matthias Brugger (1):
> clk: Add regmap support
>
> Maxime Ripard (25):
> reset: Move DT cell size check to the core
> reset: Make reset_control_ops const
> clk: composite: Add unregister function
> clk: sunxi: Add display and TCON0 clocks driver
> clk: sunxi: Add PLL3 clock
> clk: sunxi: Add TCON channel1 clock
> clk: sun5i: add DRAM gates
> ARM: sun5i: dt: Add pll3 and pll7 clocks
> ARM: sun5i: a13: Add display and TCON clocks
> ARM: sun5i: Add DRAM gates
> ARM: sun5i: Add TV encoder gate to the DTSI
> drm/fb_cma_helper: Remove implicit call to disable_unused_functions
> drm/modes: Rewrite the command line parser
> drm/modes: Support modes names on the command line
> drm: Add Allwinner A10 Display Engine support
> drm: sun4i: Add DT bindings documentation
> drm: sun4i: Add RGB output
> drm: sun4i: Add composite output
> drm: sun4i: tv: Add PAL output standard
> drm: sun4i: tv: Add NTSC output standard
> ARM: sun5i: r8: Add display blocks to the DTSI
> ARM: sun5i: chip: Enable the TV Encoder
> devicetree: Add olimex vendor prefix
> drm/panel: simple: Add timings for the Olimex LCD-OLinuXino-4.3TS
> DO NOT MERGE: ARM: sun5i: chip: Enable the LCD panel
>
> Documentation/devicetree/bindings/clock/sunxi.txt | 5 +
> .../display/panel/olimex,lcd-olinuxino-43-ts.txt | 7 +
> .../bindings/display/sunxi/sun4i-drm.txt | 228 +++++++
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> arch/arm/boot/dts/sun5i-a10s.dtsi | 7 +-
> arch/arm/boot/dts/sun5i-a13.dtsi | 46 +-
> arch/arm/boot/dts/sun5i-r8-chip.dts | 17 +
> arch/arm/boot/dts/sun5i-r8.dtsi | 139 ++++-
> arch/arm/boot/dts/sun5i.dtsi | 62 ++
> drivers/clk/Makefile | 1 +
> drivers/clk/clk-composite.c | 15 +
> drivers/clk/clk-divider.c | 68 ++-
> drivers/clk/clk-gate.c | 54 +-
> drivers/clk/clk-io.c | 48 ++
> drivers/clk/clk-io.h | 22 +
> drivers/clk/clk-mux.c | 94 ++-
> drivers/clk/sunxi/Makefile | 3 +
> drivers/clk/sunxi/clk-simple-gates.c | 2 +
> drivers/clk/sunxi/clk-sun4i-display.c | 241 ++++++++
> drivers/clk/sunxi/clk-sun4i-pll3.c | 90 +++
> drivers/clk/sunxi/clk-sun4i-tcon-ch1.c | 154 +++++
> drivers/gpu/drm/Kconfig | 2 +
> drivers/gpu/drm/Makefile | 3 +-
> drivers/gpu/drm/drm_crtc.c | 3 +-
> drivers/gpu/drm/drm_fb_cma_helper.c | 3 -
> drivers/gpu/drm/drm_fb_helper.c | 4 +
> drivers/gpu/drm/drm_modes.c | 327 ++++++----
> drivers/gpu/drm/imx/imx-drm-core.c | 1 +
> drivers/gpu/drm/panel/panel-simple.c | 26 +
> drivers/gpu/drm/sti/sti_drv.c | 1 +
> drivers/gpu/drm/sun4i/Kconfig | 14 +
> drivers/gpu/drm/sun4i/Makefile | 12 +
> drivers/gpu/drm/sun4i/sun4i_backend.c | 321 ++++++++++
> drivers/gpu/drm/sun4i/sun4i_backend.h | 160 +++++
> drivers/gpu/drm/sun4i/sun4i_crtc.c | 120 ++++
> drivers/gpu/drm/sun4i/sun4i_crtc.h | 30 +
> drivers/gpu/drm/sun4i/sun4i_drv.c | 325 ++++++++++
> drivers/gpu/drm/sun4i/sun4i_drv.h | 30 +
> drivers/gpu/drm/sun4i/sun4i_framebuffer.c | 54 ++
> drivers/gpu/drm/sun4i/sun4i_framebuffer.h | 19 +
> drivers/gpu/drm/sun4i/sun4i_layer.c | 160 +++++
> drivers/gpu/drm/sun4i/sun4i_layer.h | 30 +
> drivers/gpu/drm/sun4i/sun4i_rgb.c | 229 +++++++
> drivers/gpu/drm/sun4i/sun4i_rgb.h | 18 +
> drivers/gpu/drm/sun4i/sun4i_tcon.c | 521
> ++++++++++++++++
> drivers/gpu/drm/sun4i/sun4i_tcon.h | 177 ++++++
> drivers/gpu/drm/sun4i/sun4i_tv.c | 675
> +++++++++++++++++++++
> drivers/gpu/drm/tilcdc/tilcdc_drv.c | 1 +
> drivers/reset/core.c | 6 +-
> include/drm/drm_modes.h | 1 +
> include/linux/clk-provider.h | 55 +-
> include/linux/reset-controller.h | 2 +-
> 52 files changed, 4455 insertions(+), 179 deletions(-)
> create mode 100644
> Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino-
> 43-ts.txt
> create mode 100644
> Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
> create mode 100644 drivers/clk/clk-io.c
> create mode 100644 drivers/clk/clk-io.h
> create mode 100644 drivers/clk/sunxi/clk-sun4i-display.c
> create mode 100644 drivers/clk/sunxi/clk-sun4i-pll3.c
> create mode 100644 drivers/clk/sunxi/clk-sun4i-tcon-ch1.c
> create mode 100644 drivers/gpu/drm/sun4i/Kconfig
> create mode 100644 drivers/gpu/drm/sun4i/Makefile
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_backend.c
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_backend.h
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_crtc.c
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_crtc.h
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_drv.c
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_drv.h
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_framebuffer.c
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_framebuffer.h
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_layer.c
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_layer.h
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_rgb.c
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_rgb.h
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_tcon.c
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_tcon.h
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_tv.c
>
> --
> 2.6.4
>
WARNING: multiple messages have this Message-ID (diff)
From: plaes@plaes.org (Priit Laes)
To: linux-arm-kernel@lists.infradead.org
Subject: [linux-sunxi] [PATCH v2 00/26] drm: Add Allwinner A10 display engine support
Date: Sat, 20 Feb 2016 15:45:41 +0200 [thread overview]
Message-ID: <1455975941.10551.3.camel@plaes.org> (raw)
In-Reply-To: <1452785109-6172-1-git-send-email-maxime.ripard@free-electrons.com>
On Thu, 2016-01-14 at 16:24 +0100, Maxime Ripard wrote:
> Hi everyone,
>
> The Allwinner SoCs (except for the very latest ones) all share the
> same set of controllers, loosely coupled together to form the display
> pipeline.
>
> Depending on the SoC, the number of instances of the controller will
> change (2 instances of each in the A10, only one in the A13, for
> example), and the output availables will change too (HDMI, composite,
> VGA on the A20, none of them on the A13).
>
> On most featured SoCs, it looks like that:
>
> ?+--------------------------------------------+
> ?|????????????????????RAM?????????????????????|
> ?+--------------------------------------------+
> ???????|????????????|??????|????????????|
> ???????v????????????|??????|????????????v
> ?+----------------+ |??????| +----------------+
> ?|????Frontend????| |??????| |????Frontend????|
> ?+----------------+ |??????| +----------------+
> ?????????|??????????|??????|?????????|
> ?????????v??????????|??????|?????????v
> ?+----------------+ |??????| +----------------+
> ?|????Backend?????|<+??????+>|????Backend?????|
> ?+----------------+??????????+----------------+
> ?????????|???????????????????????????|
> ?????????v???????????????????????????v
> ?+----------------+??????????+----------------+---> LVDS
> ?|??????TCON??????|??????????|??????TCON??????|---> RGB
> ?+----------------+??????????+----------------+
> ???????|???????+---+???????+---+??????????|
> ???????|???????????|???????|??????????????|
> ???????v???????????v???????v??????????????v
> ?+------------+??+------------+??+------------+---> VGA
> ?| TV Encoder |??|????HDMI????|??| TV Encoder |---> Composite
> ?+------------+??+------------+??+------------+
>
> The current code only assumes that there is a single instance of all
> the controllers. It also supports only the RGB and Composite
> interfaces.
I found some time to play with it (with intention to get it running
also on sun7i and sun4i) and ran into this when trying to build
sun4i_drm as module:
ERROR: "sun4i_tcon1_mode_set" [drivers/gpu/drm/sun4i/sun4i_tv.ko] undefined!
ERROR: "sun4i_backend_apply_color_correction" [drivers/gpu/drm/sun4i/sun4i_tv.ko] undefined!
ERROR: "sun4i_tcon_channel_disable" [drivers/gpu/drm/sun4i/sun4i_tv.ko] undefined!
ERROR: "sun4i_tcon_channel_enable" [drivers/gpu/drm/sun4i/sun4i_tv.ko] undefined!
ERROR: "clk_unregister_composite" [drivers/gpu/drm/sun4i/sun4i_tcon.ko] undefined!
ERROR: "sun4i_rgb_init" [drivers/gpu/drm/sun4i/sun4i_tcon.ko] undefined!
ERROR: "clk_register_composite" [drivers/gpu/drm/sun4i/sun4i_tcon.ko] undefined!
ERROR: "sun4i_backend_update_layer_coord" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_backend_update_layer_formats" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_tcon_channel_disable" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_tcon_enable_vblank" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_backend_update_layer_buffer" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_backend_layer_enable" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_tcon_channel_enable" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_tcon_enable" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_tcon_disable" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_tcon0_mode_set" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_backend_commit" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
scripts/Makefile.modpost:91: recipe for target '__modpost' failed
>
> Let me know what you think,
> Maxime
>
> Changes from v1:
> ? - Rebased on top of 4.4
>
> ? - Merged the clock drivers for the display and TCON channel 0
> clocks
> ? - Replaced the container_of calls in the display reset clocks to an
> ????inline function
> ? - Checked the return code of of_clk_parent_fill in the clocks
> ????drivers
> ? - Checked the return code of of_clk_add_provider in the tcon-ch1
> and
> ????PLL3 clocks
> ? - Added missing clocks headers
> ? - Created a composite clock unregister function
>
> ? - Moved the binding documentation to
> ????Documentation/devicetree/bindings/display
> ? - Added the clocks binding documentation
> ? - Added the Olimex vendor to the list of DT vendors
> ? - Moved to the OF graph representation and the component framework
>
> ? - Moved the reset cells count check into the reset framework to
> ????avoid duplicating the code in every xlate implementation.
> ? - Made the reset_ops const
>
> ? - Reworked the DRM cmdline mode parsing code to allow named mode
> ? - Fixed the TV mode lookup when the mode name is not present (for
> ????example because it was given by the userspace)
>
> ? - Made the driver outputs optional (to avoid crashing when a board
> ????doesn't have either a panel or a composite output enabled)
> ? - Added multiple plane support with transparency
> ? - Moved the backend registers writes commit in the CRTC
> atomic_flush
> ????callback
> ? - Removed the load / unload functions
> ? - Removed the enabled booleans in my private structure and removed
> ????the implicit call to disable_unused_functions in the DRM core to
> ????push it in the drivers.
> ? - Fixed a few bitmasks on some bitfields definition
> ? - Fixed the RGB connector mode validation that was not testing the
> ????right values
>
> Matthias Brugger (1):
> ? clk: Add regmap support
>
> Maxime Ripard (25):
> ? reset: Move DT cell size check to the core
> ? reset: Make reset_control_ops const
> ? clk: composite: Add unregister function
> ? clk: sunxi: Add display and TCON0 clocks driver
> ? clk: sunxi: Add PLL3 clock
> ? clk: sunxi: Add TCON channel1 clock
> ? clk: sun5i: add DRAM gates
> ? ARM: sun5i: dt: Add pll3 and pll7 clocks
> ? ARM: sun5i: a13: Add display and TCON clocks
> ? ARM: sun5i: Add DRAM gates
> ? ARM: sun5i: Add TV encoder gate to the DTSI
> ? drm/fb_cma_helper: Remove implicit call to disable_unused_functions
> ? drm/modes: Rewrite the command line parser
> ? drm/modes: Support modes names on the command line
> ? drm: Add Allwinner A10 Display Engine support
> ? drm: sun4i: Add DT bindings documentation
> ? drm: sun4i: Add RGB output
> ? drm: sun4i: Add composite output
> ? drm: sun4i: tv: Add PAL output standard
> ? drm: sun4i: tv: Add NTSC output standard
> ? ARM: sun5i: r8: Add display blocks to the DTSI
> ? ARM: sun5i: chip: Enable the TV Encoder
> ? devicetree: Add olimex vendor prefix
> ? drm/panel: simple: Add timings for the Olimex LCD-OLinuXino-4.3TS
> ? DO NOT MERGE: ARM: sun5i: chip: Enable the LCD panel
>
> ?Documentation/devicetree/bindings/clock/sunxi.txt??|???5 +
> ?.../display/panel/olimex,lcd-olinuxino-43-ts.txt???|???7 +
> ?.../bindings/display/sunxi/sun4i-drm.txt???????????| 228 +++++++
> ?.../devicetree/bindings/vendor-prefixes.txt????????|???1 +
> ?arch/arm/boot/dts/sun5i-a10s.dtsi??????????????????|???7 +-
> ?arch/arm/boot/dts/sun5i-a13.dtsi???????????????????|??46 +-
> ?arch/arm/boot/dts/sun5i-r8-chip.dts????????????????|??17 +
> ?arch/arm/boot/dts/sun5i-r8.dtsi????????????????????| 139 ++++-
> ?arch/arm/boot/dts/sun5i.dtsi???????????????????????|??62 ++
> ?drivers/clk/Makefile???????????????????????????????|???1 +
> ?drivers/clk/clk-composite.c????????????????????????|??15 +
> ?drivers/clk/clk-divider.c??????????????????????????|??68 ++-
> ?drivers/clk/clk-gate.c?????????????????????????????|??54 +-
> ?drivers/clk/clk-io.c???????????????????????????????|??48 ++
> ?drivers/clk/clk-io.h???????????????????????????????|??22 +
> ?drivers/clk/clk-mux.c??????????????????????????????|??94 ++-
> ?drivers/clk/sunxi/Makefile?????????????????????????|???3 +
> ?drivers/clk/sunxi/clk-simple-gates.c???????????????|???2 +
> ?drivers/clk/sunxi/clk-sun4i-display.c??????????????| 241 ++++++++
> ?drivers/clk/sunxi/clk-sun4i-pll3.c?????????????????|??90 +++
> ?drivers/clk/sunxi/clk-sun4i-tcon-ch1.c?????????????| 154 +++++
> ?drivers/gpu/drm/Kconfig????????????????????????????|???2 +
> ?drivers/gpu/drm/Makefile???????????????????????????|???3 +-
> ?drivers/gpu/drm/drm_crtc.c?????????????????????????|???3 +-
> ?drivers/gpu/drm/drm_fb_cma_helper.c????????????????|???3 -
> ?drivers/gpu/drm/drm_fb_helper.c????????????????????|???4 +
> ?drivers/gpu/drm/drm_modes.c????????????????????????| 327 ++++++----
> ?drivers/gpu/drm/imx/imx-drm-core.c?????????????????|???1 +
> ?drivers/gpu/drm/panel/panel-simple.c???????????????|??26 +
> ?drivers/gpu/drm/sti/sti_drv.c??????????????????????|???1 +
> ?drivers/gpu/drm/sun4i/Kconfig??????????????????????|??14 +
> ?drivers/gpu/drm/sun4i/Makefile?????????????????????|??12 +
> ?drivers/gpu/drm/sun4i/sun4i_backend.c??????????????| 321 ++++++++++
> ?drivers/gpu/drm/sun4i/sun4i_backend.h??????????????| 160 +++++
> ?drivers/gpu/drm/sun4i/sun4i_crtc.c?????????????????| 120 ++++
> ?drivers/gpu/drm/sun4i/sun4i_crtc.h?????????????????|??30 +
> ?drivers/gpu/drm/sun4i/sun4i_drv.c??????????????????| 325 ++++++++++
> ?drivers/gpu/drm/sun4i/sun4i_drv.h??????????????????|??30 +
> ?drivers/gpu/drm/sun4i/sun4i_framebuffer.c??????????|??54 ++
> ?drivers/gpu/drm/sun4i/sun4i_framebuffer.h??????????|??19 +
> ?drivers/gpu/drm/sun4i/sun4i_layer.c????????????????| 160 +++++
> ?drivers/gpu/drm/sun4i/sun4i_layer.h????????????????|??30 +
> ?drivers/gpu/drm/sun4i/sun4i_rgb.c??????????????????| 229 +++++++
> ?drivers/gpu/drm/sun4i/sun4i_rgb.h??????????????????|??18 +
> ?drivers/gpu/drm/sun4i/sun4i_tcon.c?????????????????| 521
> ++++++++++++++++
> ?drivers/gpu/drm/sun4i/sun4i_tcon.h?????????????????| 177 ++++++
> ?drivers/gpu/drm/sun4i/sun4i_tv.c???????????????????| 675
> +++++++++++++++++++++
> ?drivers/gpu/drm/tilcdc/tilcdc_drv.c????????????????|???1 +
> ?drivers/reset/core.c???????????????????????????????|???6 +-
> ?include/drm/drm_modes.h????????????????????????????|???1 +
> ?include/linux/clk-provider.h???????????????????????|??55 +-
> ?include/linux/reset-controller.h???????????????????|???2 +-
> ?52 files changed, 4455 insertions(+), 179 deletions(-)
> ?create mode 100644
> Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino-
> 43-ts.txt
> ?create mode 100644
> Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
> ?create mode 100644 drivers/clk/clk-io.c
> ?create mode 100644 drivers/clk/clk-io.h
> ?create mode 100644 drivers/clk/sunxi/clk-sun4i-display.c
> ?create mode 100644 drivers/clk/sunxi/clk-sun4i-pll3.c
> ?create mode 100644 drivers/clk/sunxi/clk-sun4i-tcon-ch1.c
> ?create mode 100644 drivers/gpu/drm/sun4i/Kconfig
> ?create mode 100644 drivers/gpu/drm/sun4i/Makefile
> ?create mode 100644 drivers/gpu/drm/sun4i/sun4i_backend.c
> ?create mode 100644 drivers/gpu/drm/sun4i/sun4i_backend.h
> ?create mode 100644 drivers/gpu/drm/sun4i/sun4i_crtc.c
> ?create mode 100644 drivers/gpu/drm/sun4i/sun4i_crtc.h
> ?create mode 100644 drivers/gpu/drm/sun4i/sun4i_drv.c
> ?create mode 100644 drivers/gpu/drm/sun4i/sun4i_drv.h
> ?create mode 100644 drivers/gpu/drm/sun4i/sun4i_framebuffer.c
> ?create mode 100644 drivers/gpu/drm/sun4i/sun4i_framebuffer.h
> ?create mode 100644 drivers/gpu/drm/sun4i/sun4i_layer.c
> ?create mode 100644 drivers/gpu/drm/sun4i/sun4i_layer.h
> ?create mode 100644 drivers/gpu/drm/sun4i/sun4i_rgb.c
> ?create mode 100644 drivers/gpu/drm/sun4i/sun4i_rgb.h
> ?create mode 100644 drivers/gpu/drm/sun4i/sun4i_tcon.c
> ?create mode 100644 drivers/gpu/drm/sun4i/sun4i_tcon.h
> ?create mode 100644 drivers/gpu/drm/sun4i/sun4i_tv.c
>
> --?
> 2.6.4
>
WARNING: multiple messages have this Message-ID (diff)
From: Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
Mike Turquette
<mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
David Airlie <airlied-cv59FeDIM0c@public.gmane.org>,
Thierry Reding
<thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
Laurent Pinchart
<laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>,
Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
Alexander Kaplan <alex-MflLfwwFzuz+yO7R74ARew@public.gmane.org>,
Boris Brezillon
<boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Wynter Woods <wynter-MflLfwwFzuz+yO7R74ARew@public.gmane.org>,
Thomas Petazzoni
<thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Rob Clark <robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Daniel Vetter <daniel-/w4YWyX8dFk@public.gmane.org>
Subject: Re: [PATCH v2 00/26] drm: Add Allwinner A10 display engine support
Date: Sat, 20 Feb 2016 15:45:41 +0200 [thread overview]
Message-ID: <1455975941.10551.3.camel@plaes.org> (raw)
In-Reply-To: <1452785109-6172-1-git-send-email-maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
On Thu, 2016-01-14 at 16:24 +0100, Maxime Ripard wrote:
> Hi everyone,
>
> The Allwinner SoCs (except for the very latest ones) all share the
> same set of controllers, loosely coupled together to form the display
> pipeline.
>
> Depending on the SoC, the number of instances of the controller will
> change (2 instances of each in the A10, only one in the A13, for
> example), and the output availables will change too (HDMI, composite,
> VGA on the A20, none of them on the A13).
>
> On most featured SoCs, it looks like that:
>
> +--------------------------------------------+
> | RAM |
> +--------------------------------------------+
> | | | |
> v | | v
> +----------------+ | | +----------------+
> | Frontend | | | | Frontend |
> +----------------+ | | +----------------+
> | | | |
> v | | v
> +----------------+ | | +----------------+
> | Backend |<+ +>| Backend |
> +----------------+ +----------------+
> | |
> v v
> +----------------+ +----------------+---> LVDS
> | TCON | | TCON |---> RGB
> +----------------+ +----------------+
> | +---+ +---+ |
> | | | |
> v v v v
> +------------+ +------------+ +------------+---> VGA
> | TV Encoder | | HDMI | | TV Encoder |---> Composite
> +------------+ +------------+ +------------+
>
> The current code only assumes that there is a single instance of all
> the controllers. It also supports only the RGB and Composite
> interfaces.
I found some time to play with it (with intention to get it running
also on sun7i and sun4i) and ran into this when trying to build
sun4i_drm as module:
ERROR: "sun4i_tcon1_mode_set" [drivers/gpu/drm/sun4i/sun4i_tv.ko] undefined!
ERROR: "sun4i_backend_apply_color_correction" [drivers/gpu/drm/sun4i/sun4i_tv.ko] undefined!
ERROR: "sun4i_tcon_channel_disable" [drivers/gpu/drm/sun4i/sun4i_tv.ko] undefined!
ERROR: "sun4i_tcon_channel_enable" [drivers/gpu/drm/sun4i/sun4i_tv.ko] undefined!
ERROR: "clk_unregister_composite" [drivers/gpu/drm/sun4i/sun4i_tcon.ko] undefined!
ERROR: "sun4i_rgb_init" [drivers/gpu/drm/sun4i/sun4i_tcon.ko] undefined!
ERROR: "clk_register_composite" [drivers/gpu/drm/sun4i/sun4i_tcon.ko] undefined!
ERROR: "sun4i_backend_update_layer_coord" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_backend_update_layer_formats" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_tcon_channel_disable" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_tcon_enable_vblank" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_backend_update_layer_buffer" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_backend_layer_enable" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_tcon_channel_enable" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_tcon_enable" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_tcon_disable" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_tcon0_mode_set" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
ERROR: "sun4i_backend_commit" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
scripts/Makefile.modpost:91: recipe for target '__modpost' failed
>
> Let me know what you think,
> Maxime
>
> Changes from v1:
> - Rebased on top of 4.4
>
> - Merged the clock drivers for the display and TCON channel 0
> clocks
> - Replaced the container_of calls in the display reset clocks to an
> inline function
> - Checked the return code of of_clk_parent_fill in the clocks
> drivers
> - Checked the return code of of_clk_add_provider in the tcon-ch1
> and
> PLL3 clocks
> - Added missing clocks headers
> - Created a composite clock unregister function
>
> - Moved the binding documentation to
> Documentation/devicetree/bindings/display
> - Added the clocks binding documentation
> - Added the Olimex vendor to the list of DT vendors
> - Moved to the OF graph representation and the component framework
>
> - Moved the reset cells count check into the reset framework to
> avoid duplicating the code in every xlate implementation.
> - Made the reset_ops const
>
> - Reworked the DRM cmdline mode parsing code to allow named mode
> - Fixed the TV mode lookup when the mode name is not present (for
> example because it was given by the userspace)
>
> - Made the driver outputs optional (to avoid crashing when a board
> doesn't have either a panel or a composite output enabled)
> - Added multiple plane support with transparency
> - Moved the backend registers writes commit in the CRTC
> atomic_flush
> callback
> - Removed the load / unload functions
> - Removed the enabled booleans in my private structure and removed
> the implicit call to disable_unused_functions in the DRM core to
> push it in the drivers.
> - Fixed a few bitmasks on some bitfields definition
> - Fixed the RGB connector mode validation that was not testing the
> right values
>
> Matthias Brugger (1):
> clk: Add regmap support
>
> Maxime Ripard (25):
> reset: Move DT cell size check to the core
> reset: Make reset_control_ops const
> clk: composite: Add unregister function
> clk: sunxi: Add display and TCON0 clocks driver
> clk: sunxi: Add PLL3 clock
> clk: sunxi: Add TCON channel1 clock
> clk: sun5i: add DRAM gates
> ARM: sun5i: dt: Add pll3 and pll7 clocks
> ARM: sun5i: a13: Add display and TCON clocks
> ARM: sun5i: Add DRAM gates
> ARM: sun5i: Add TV encoder gate to the DTSI
> drm/fb_cma_helper: Remove implicit call to disable_unused_functions
> drm/modes: Rewrite the command line parser
> drm/modes: Support modes names on the command line
> drm: Add Allwinner A10 Display Engine support
> drm: sun4i: Add DT bindings documentation
> drm: sun4i: Add RGB output
> drm: sun4i: Add composite output
> drm: sun4i: tv: Add PAL output standard
> drm: sun4i: tv: Add NTSC output standard
> ARM: sun5i: r8: Add display blocks to the DTSI
> ARM: sun5i: chip: Enable the TV Encoder
> devicetree: Add olimex vendor prefix
> drm/panel: simple: Add timings for the Olimex LCD-OLinuXino-4.3TS
> DO NOT MERGE: ARM: sun5i: chip: Enable the LCD panel
>
> Documentation/devicetree/bindings/clock/sunxi.txt | 5 +
> .../display/panel/olimex,lcd-olinuxino-43-ts.txt | 7 +
> .../bindings/display/sunxi/sun4i-drm.txt | 228 +++++++
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> arch/arm/boot/dts/sun5i-a10s.dtsi | 7 +-
> arch/arm/boot/dts/sun5i-a13.dtsi | 46 +-
> arch/arm/boot/dts/sun5i-r8-chip.dts | 17 +
> arch/arm/boot/dts/sun5i-r8.dtsi | 139 ++++-
> arch/arm/boot/dts/sun5i.dtsi | 62 ++
> drivers/clk/Makefile | 1 +
> drivers/clk/clk-composite.c | 15 +
> drivers/clk/clk-divider.c | 68 ++-
> drivers/clk/clk-gate.c | 54 +-
> drivers/clk/clk-io.c | 48 ++
> drivers/clk/clk-io.h | 22 +
> drivers/clk/clk-mux.c | 94 ++-
> drivers/clk/sunxi/Makefile | 3 +
> drivers/clk/sunxi/clk-simple-gates.c | 2 +
> drivers/clk/sunxi/clk-sun4i-display.c | 241 ++++++++
> drivers/clk/sunxi/clk-sun4i-pll3.c | 90 +++
> drivers/clk/sunxi/clk-sun4i-tcon-ch1.c | 154 +++++
> drivers/gpu/drm/Kconfig | 2 +
> drivers/gpu/drm/Makefile | 3 +-
> drivers/gpu/drm/drm_crtc.c | 3 +-
> drivers/gpu/drm/drm_fb_cma_helper.c | 3 -
> drivers/gpu/drm/drm_fb_helper.c | 4 +
> drivers/gpu/drm/drm_modes.c | 327 ++++++----
> drivers/gpu/drm/imx/imx-drm-core.c | 1 +
> drivers/gpu/drm/panel/panel-simple.c | 26 +
> drivers/gpu/drm/sti/sti_drv.c | 1 +
> drivers/gpu/drm/sun4i/Kconfig | 14 +
> drivers/gpu/drm/sun4i/Makefile | 12 +
> drivers/gpu/drm/sun4i/sun4i_backend.c | 321 ++++++++++
> drivers/gpu/drm/sun4i/sun4i_backend.h | 160 +++++
> drivers/gpu/drm/sun4i/sun4i_crtc.c | 120 ++++
> drivers/gpu/drm/sun4i/sun4i_crtc.h | 30 +
> drivers/gpu/drm/sun4i/sun4i_drv.c | 325 ++++++++++
> drivers/gpu/drm/sun4i/sun4i_drv.h | 30 +
> drivers/gpu/drm/sun4i/sun4i_framebuffer.c | 54 ++
> drivers/gpu/drm/sun4i/sun4i_framebuffer.h | 19 +
> drivers/gpu/drm/sun4i/sun4i_layer.c | 160 +++++
> drivers/gpu/drm/sun4i/sun4i_layer.h | 30 +
> drivers/gpu/drm/sun4i/sun4i_rgb.c | 229 +++++++
> drivers/gpu/drm/sun4i/sun4i_rgb.h | 18 +
> drivers/gpu/drm/sun4i/sun4i_tcon.c | 521
> ++++++++++++++++
> drivers/gpu/drm/sun4i/sun4i_tcon.h | 177 ++++++
> drivers/gpu/drm/sun4i/sun4i_tv.c | 675
> +++++++++++++++++++++
> drivers/gpu/drm/tilcdc/tilcdc_drv.c | 1 +
> drivers/reset/core.c | 6 +-
> include/drm/drm_modes.h | 1 +
> include/linux/clk-provider.h | 55 +-
> include/linux/reset-controller.h | 2 +-
> 52 files changed, 4455 insertions(+), 179 deletions(-)
> create mode 100644
> Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino-
> 43-ts.txt
> create mode 100644
> Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
> create mode 100644 drivers/clk/clk-io.c
> create mode 100644 drivers/clk/clk-io.h
> create mode 100644 drivers/clk/sunxi/clk-sun4i-display.c
> create mode 100644 drivers/clk/sunxi/clk-sun4i-pll3.c
> create mode 100644 drivers/clk/sunxi/clk-sun4i-tcon-ch1.c
> create mode 100644 drivers/gpu/drm/sun4i/Kconfig
> create mode 100644 drivers/gpu/drm/sun4i/Makefile
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_backend.c
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_backend.h
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_crtc.c
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_crtc.h
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_drv.c
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_drv.h
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_framebuffer.c
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_framebuffer.h
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_layer.c
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_layer.h
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_rgb.c
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_rgb.h
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_tcon.c
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_tcon.h
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_tv.c
>
> --
> 2.6.4
>
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
next prev parent reply other threads:[~2016-02-20 13:45 UTC|newest]
Thread overview: 196+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-14 15:24 [PATCH v2 00/26] drm: Add Allwinner A10 display engine support Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-14 15:24 ` [PATCH v2 01/26] reset: Move DT cell size check to the core Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-15 15:50 ` Philipp Zabel
2016-01-15 15:50 ` Philipp Zabel
2016-01-15 15:50 ` Philipp Zabel
2016-01-14 15:24 ` [PATCH v2 02/26] reset: Make reset_control_ops const Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-15 15:50 ` Philipp Zabel
2016-01-15 15:50 ` Philipp Zabel
2016-01-15 15:50 ` Philipp Zabel
2016-01-14 15:24 ` [PATCH v2 03/26] clk: Add regmap support Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-28 7:56 ` Stephen Boyd
2016-01-28 7:56 ` Stephen Boyd
2016-01-28 7:56 ` Stephen Boyd
2016-01-14 15:24 ` [PATCH v2 04/26] clk: composite: Add unregister function Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-14 15:24 ` [PATCH v2 05/26] clk: sunxi: Add display and TCON0 clocks driver Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-15 3:01 ` Rob Herring
2016-01-15 3:01 ` Rob Herring
2016-01-15 3:01 ` Rob Herring
2016-01-16 14:08 ` [linux-sunxi] " Priit Laes
2016-01-16 14:08 ` Priit Laes
2016-01-16 14:08 ` [linux-sunxi] " Priit Laes
2016-01-16 15:29 ` Chen-Yu Tsai
2016-01-16 15:29 ` Chen-Yu Tsai
2016-01-16 15:29 ` Chen-Yu Tsai
2016-02-03 20:18 ` Maxime Ripard
2016-02-03 20:18 ` Maxime Ripard
2016-02-03 20:18 ` Maxime Ripard
2016-01-14 15:24 ` [PATCH v2 06/26] clk: sunxi: Add PLL3 clock Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-15 3:02 ` Rob Herring
2016-01-15 3:02 ` Rob Herring
2016-01-15 3:02 ` Rob Herring
2016-01-16 16:05 ` Chen-Yu Tsai
2016-01-16 16:05 ` Chen-Yu Tsai
2016-01-16 16:05 ` Chen-Yu Tsai
2016-02-03 20:27 ` Maxime Ripard
2016-02-03 20:27 ` Maxime Ripard
2016-02-03 20:27 ` Maxime Ripard
2016-01-14 15:24 ` [PATCH v2 07/26] clk: sunxi: Add TCON channel1 clock Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-15 3:03 ` Rob Herring
2016-01-15 3:03 ` Rob Herring
2016-01-15 3:03 ` Rob Herring
2016-01-16 16:36 ` Chen-Yu Tsai
2016-01-16 16:36 ` Chen-Yu Tsai
2016-01-16 16:36 ` Chen-Yu Tsai
2016-02-03 20:29 ` Maxime Ripard
2016-02-03 20:29 ` Maxime Ripard
2016-02-03 20:29 ` Maxime Ripard
2016-01-14 15:24 ` [PATCH v2 08/26] clk: sun5i: add DRAM gates Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-15 3:04 ` Rob Herring
2016-01-15 3:04 ` Rob Herring
2016-01-15 3:04 ` Rob Herring
2016-01-14 15:24 ` [PATCH v2 09/26] ARM: sun5i: dt: Add pll3 and pll7 clocks Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-14 15:24 ` [PATCH v2 10/26] ARM: sun5i: a13: Add display and TCON clocks Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-16 17:06 ` Chen-Yu Tsai
2016-01-16 17:06 ` Chen-Yu Tsai
2016-01-16 17:06 ` Chen-Yu Tsai
2016-02-03 20:31 ` Maxime Ripard
2016-02-03 20:31 ` Maxime Ripard
2016-02-05 9:49 ` Chen-Yu Tsai
2016-02-05 9:49 ` Chen-Yu Tsai
2016-02-05 9:49 ` Chen-Yu Tsai
2016-01-14 15:24 ` [PATCH v2 11/26] ARM: sun5i: Add DRAM gates Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-16 17:10 ` Chen-Yu Tsai
2016-01-16 17:10 ` Chen-Yu Tsai
2016-01-16 17:10 ` Chen-Yu Tsai
2016-02-03 20:36 ` Maxime Ripard
2016-02-03 20:36 ` Maxime Ripard
2016-01-14 15:24 ` [PATCH v2 12/26] ARM: sun5i: Add TV encoder gate to the DTSI Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-16 17:12 ` Chen-Yu Tsai
2016-01-16 17:12 ` Chen-Yu Tsai
2016-01-16 17:12 ` Chen-Yu Tsai
2016-01-14 15:24 ` [PATCH v2 13/26] drm/fb_cma_helper: Remove implicit call to disable_unused_functions Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-14 23:13 ` Laurent Pinchart
2016-01-14 23:13 ` Laurent Pinchart
2016-01-14 23:13 ` Laurent Pinchart
2016-01-15 10:17 ` Daniel Vetter
2016-01-15 10:17 ` Daniel Vetter
2016-01-15 10:17 ` Daniel Vetter
2016-01-24 22:19 ` Laurent Pinchart
2016-01-24 22:19 ` Laurent Pinchart
2016-01-24 22:19 ` Laurent Pinchart
2016-01-24 22:19 ` Laurent Pinchart
2016-01-25 7:29 ` Daniel Vetter
2016-01-25 7:29 ` Daniel Vetter
2016-01-25 7:29 ` Daniel Vetter
[not found] ` <20160125072938.GI11240-dv86pmgwkMBes7Z6vYuT8azUEOm+Xw19@public.gmane.org>
2016-01-25 19:02 ` Laurent Pinchart
2016-01-25 19:02 ` Laurent Pinchart
2016-01-25 19:02 ` Laurent Pinchart
2016-01-25 19:02 ` Laurent Pinchart
2016-01-25 19:02 ` Laurent Pinchart
2016-01-25 19:02 ` Laurent Pinchart
2016-01-25 19:02 ` Laurent Pinchart
2016-01-24 22:19 ` Laurent Pinchart
2016-01-24 22:19 ` Laurent Pinchart
[not found] ` <20160115101730.GH19130-dv86pmgwkMBes7Z6vYuT8azUEOm+Xw19@public.gmane.org>
2016-01-24 22:19 ` Laurent Pinchart
2016-01-14 15:24 ` [PATCH v2 14/26] drm/modes: Rewrite the command line parser Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-14 15:24 ` [PATCH v2 15/26] drm/modes: Support modes names on the command line Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-14 15:24 ` [PATCH v2 16/26] drm: Add Allwinner A10 Display Engine support Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-14 15:24 ` Maxime Ripard
2016-01-16 15:11 ` [linux-sunxi] " Priit Laes
2016-01-16 15:11 ` Priit Laes
2016-01-16 15:11 ` [linux-sunxi] " Priit Laes
2016-01-17 12:58 ` Priit Laes
2016-01-17 12:58 ` Priit Laes
2016-01-17 12:58 ` Priit Laes
2016-01-19 15:38 ` Maxime Ripard
2016-01-19 15:38 ` Maxime Ripard
2016-01-14 15:25 ` [PATCH v2 17/26] drm: sun4i: Add DT bindings documentation Maxime Ripard
2016-01-14 15:25 ` Maxime Ripard
2016-01-14 15:25 ` Maxime Ripard
2016-01-15 3:15 ` Rob Herring
2016-01-15 3:15 ` Rob Herring
2016-01-15 3:15 ` Rob Herring
2016-02-03 19:59 ` Maxime Ripard
2016-02-03 19:59 ` Maxime Ripard
2016-02-03 19:59 ` Maxime Ripard
2016-02-03 20:19 ` Rob Herring
2016-02-03 20:19 ` Rob Herring
2016-02-03 20:19 ` Rob Herring
2016-02-03 20:47 ` Maxime Ripard
2016-02-03 20:47 ` Maxime Ripard
2016-02-03 20:47 ` Maxime Ripard
2016-01-14 15:25 ` [PATCH v2 18/26] drm: sun4i: Add RGB output Maxime Ripard
2016-01-14 15:25 ` Maxime Ripard
2016-01-14 15:25 ` Maxime Ripard
2016-01-14 15:25 ` [PATCH v2 19/26] drm: sun4i: Add composite output Maxime Ripard
2016-01-14 15:25 ` Maxime Ripard
2016-01-14 15:25 ` Maxime Ripard
2016-01-14 15:25 ` [PATCH v2 20/26] drm: sun4i: tv: Add PAL output standard Maxime Ripard
2016-01-14 15:25 ` Maxime Ripard
2016-01-14 15:25 ` Maxime Ripard
2016-01-14 15:25 ` [PATCH v2 21/26] drm: sun4i: tv: Add NTSC " Maxime Ripard
2016-01-14 15:25 ` Maxime Ripard
2016-01-14 15:25 ` Maxime Ripard
2016-01-14 15:25 ` [PATCH v2 22/26] ARM: sun5i: r8: Add display blocks to the DTSI Maxime Ripard
2016-01-14 15:25 ` Maxime Ripard
2016-01-14 15:25 ` Maxime Ripard
2016-01-14 15:25 ` [PATCH v2 23/26] ARM: sun5i: chip: Enable the TV Encoder Maxime Ripard
2016-01-14 15:25 ` Maxime Ripard
2016-01-14 15:25 ` Maxime Ripard
2016-01-14 15:25 ` [PATCH v2 24/26] devicetree: Add olimex vendor prefix Maxime Ripard
2016-01-14 15:25 ` Maxime Ripard
2016-01-14 15:25 ` Maxime Ripard
2016-01-15 3:15 ` Rob Herring
2016-01-15 3:15 ` Rob Herring
2016-01-15 3:15 ` Rob Herring
2016-01-15 6:41 ` Stefan Wahren
2016-01-15 6:41 ` Stefan Wahren
2016-01-15 8:05 ` Maxime Ripard
2016-01-15 8:05 ` Maxime Ripard
2016-01-15 8:05 ` Maxime Ripard
2016-01-14 15:25 ` [PATCH v2 25/26] drm/panel: simple: Add timings for the Olimex LCD-OLinuXino-4.3TS Maxime Ripard
2016-01-14 15:25 ` Maxime Ripard
2016-01-14 15:25 ` Maxime Ripard
2016-01-15 3:17 ` Rob Herring
2016-01-15 3:17 ` Rob Herring
2016-01-15 3:17 ` Rob Herring
2016-01-14 15:25 ` [PATCH v2 26/26] DO NOT MERGE: ARM: sun5i: chip: Enable the LCD panel Maxime Ripard
2016-01-14 15:25 ` Maxime Ripard
2016-01-14 15:25 ` Maxime Ripard
2016-02-20 13:45 ` Priit Laes [this message]
2016-02-20 13:45 ` [PATCH v2 00/26] drm: Add Allwinner A10 display engine support Priit Laes
2016-02-20 13:45 ` [linux-sunxi] " Priit Laes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1455975941.10551.3.camel@plaes.org \
--to=plaes@plaes.org \
--cc=airlied@linux.ie \
--cc=alex@nextthing.co \
--cc=boris.brezillon@free-electrons.com \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=hdegoede@redhat.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@free-electrons.com \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robdclark@gmail.com \
--cc=sboyd@codeaurora.org \
--cc=thierry.reding@gmail.com \
--cc=thomas.petazzoni@free-electrons.com \
--cc=wens@csie.org \
--cc=wynter@nextthing.co \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.