Patch "ARM: dts: at91: sama5d4ek: add phy address and IRQ for macb0" has been added to the 4.4-stable tree

Patch "ARM: dts: at91: sama5d4ek: add phy address and IRQ for macb0" has been added to the 4.4-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    ARM: dts: at91: sama5d4ek: add phy address and IRQ for macb0

to the 4.4-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     arm-dts-at91-sama5d4ek-add-phy-address-and-irq-for-macb0.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From aae6b18f5c95b9dc78de66d1e27e8afeee2763b7 Mon Sep 17 00:00:00 2001
From: Wenyou Yang <wenyou.yang@atmel.com>
Date: Wed, 27 Jan 2016 13:16:24 +0800
Subject: ARM: dts: at91: sama5d4ek: add phy address and IRQ for macb0

From: Wenyou Yang <wenyou.yang@atmel.com>

commit aae6b18f5c95b9dc78de66d1e27e8afeee2763b7 upstream.

On SAMA5D4EK board, the Ethernet doesn't work after resuming from the suspend
state.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
[nicolas.ferre@atmel.com: adapt to newer kernel]
Fixes: 38153a017896 ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board")
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/at91-sama5d4ek.dts |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -160,8 +160,15 @@
 			};
 
 			macb0: ethernet@f8020000 {
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
 				phy-mode = "rmii";
 				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioE>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+				};
 			};
 
 			mmc1: mmc@fc000000 {
@@ -193,6 +200,10 @@
 
 			pinctrl@fc06a000 {
 				board {
+					pinctrl_macb0_phy_irq: macb0_phy_irq {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 					pinctrl_mmc0_cd: mmc0_cd {
 						atmel,pins =
 							<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;


Patches currently in stable-queue which might be from wenyou.yang@atmel.com are

queue-4.4/arm-dts-at91-sama5d4ek-add-phy-address-and-irq-for-macb0.patch