Patch "phy: twl4030-usb: Fix unbalanced pm_runtime_enable on module reload" has been added to the 4.4-stable tree

Patch "phy: twl4030-usb: Fix unbalanced pm_runtime_enable on module reload" has been added to the 4.4-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    phy: twl4030-usb: Fix unbalanced pm_runtime_enable on module reload

to the 4.4-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     phy-twl4030-usb-fix-unbalanced-pm_runtime_enable-on-module-reload.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 58a66dba1beac2121d931cda4682ae4d40816af5 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 30 Nov 2015 21:39:54 -0800
Subject: phy: twl4030-usb: Fix unbalanced pm_runtime_enable on module reload

From: Tony Lindgren <tony@atomide.com>

commit 58a66dba1beac2121d931cda4682ae4d40816af5 upstream.

If we reload phy-twl4030-usb, we get a warning about unbalanced
pm_runtime_enable. Let's fix the issue and also fix idling of the
device on unload before we attempt to shut it down.

If we don't properly idle the PHY before shutting it down on removal,
the twl4030 ends up consuming about 62mW of extra power compared to
running idle with the module loaded.

Cc: Bin Liu <b-liu@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: NeilBrown <neil@brown.name>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/phy/phy-twl4030-usb.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

--- a/drivers/phy/phy-twl4030-usb.c
+++ b/drivers/phy/phy-twl4030-usb.c
@@ -715,6 +715,7 @@ static int twl4030_usb_probe(struct plat
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
 	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
 
 	/* Our job is to use irqs and status from the power module
 	 * to keep the transceiver disabled when nothing's connected.
@@ -758,6 +759,13 @@ static int twl4030_usb_remove(struct pla
 	/* set transceiver mode to power on defaults */
 	twl4030_usb_set_mode(twl, -1);
 
+	/* idle ulpi before powering off */
+	if (cable_present(twl->linkstat))
+		pm_runtime_put_noidle(twl->dev);
+	pm_runtime_mark_last_busy(twl->dev);
+	pm_runtime_put_sync_suspend(twl->dev);
+	pm_runtime_disable(twl->dev);
+
 	/* autogate 60MHz ULPI clock,
 	 * clear dpll clock request for i2c access,
 	 * disable 32KHz
@@ -772,11 +780,6 @@ static int twl4030_usb_remove(struct pla
 	/* disable complete OTG block */
 	twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
 
-	if (cable_present(twl->linkstat))
-		pm_runtime_put_noidle(twl->dev);
-	pm_runtime_mark_last_busy(twl->dev);
-	pm_runtime_put(twl->dev);
-
 	return 0;
 }
 


Patches currently in stable-queue which might be from tony@atomide.com are

queue-4.4/phy-twl4030-usb-relase-usb-phy-on-unload.patch
queue-4.4/arm-omap2-fix-wait_dll_lock_timed-for-rodata.patch
queue-4.4/arm-dts-fix-omap5-pmic-control-lines-for-rtc-writes.patch
queue-4.4/arm-omap2-fix-l2_inv_api_params-for-rodata.patch
queue-4.4/arm-omap2-fix-ppa_zero_params-and-ppa_por_params-for-rodata.patch
queue-4.4/arm-omap2-fix-l2dis_3630-for-rodata.patch
queue-4.4/arm-omap2-fix-save_secure_ram_context-for-rodata.patch
queue-4.4/phy-twl4030-usb-fix-unbalanced-pm_runtime_enable-on-module-reload.patch
queue-4.4/arm-dts-omap5-board-common-enable-rtc-and-charging-of-backup-battery.patch
queue-4.4/arm-dts-fix-wl12xx-missing-clocks-that-cause-hangs.patch