Patch "serial: 8250_pci: Add Intel Broadwell ports" has been added to the 4.4-stable tree

Patch "serial: 8250_pci: Add Intel Broadwell ports" has been added to the 4.4-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    serial: 8250_pci: Add Intel Broadwell ports

to the 4.4-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     serial-8250_pci-add-intel-broadwell-ports.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 6c55d9b98335f7f6bd5f061866ff1633401f3a44 Mon Sep 17 00:00:00 2001
From: Mika Westerberg <mika.westerberg@linux.intel.com>
Date: Fri, 29 Jan 2016 16:49:47 +0200
Subject: serial: 8250_pci: Add Intel Broadwell ports

From: Mika Westerberg <mika.westerberg@linux.intel.com>

commit 6c55d9b98335f7f6bd5f061866ff1633401f3a44 upstream.

Some recent (early 2015) macbooks have Intel Broadwell where LPSS UARTs are
PCI enumerated instead of ACPI. The LPSS UART block is pretty much same as
used on Intel Baytrail so we can reuse the existing Baytrail setup code.

Add both Broadwell LPSS UART ports to the list of supported devices.

Signed-off-by: Leif Liddy <leif.liddy@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250_pci.c |   29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1379,6 +1379,9 @@ ce4100_serial_setup(struct serial_privat
 #define PCI_DEVICE_ID_INTEL_BSW_UART1	0x228a
 #define PCI_DEVICE_ID_INTEL_BSW_UART2	0x228c
 
+#define PCI_DEVICE_ID_INTEL_BDW_UART1	0x9ce3
+#define PCI_DEVICE_ID_INTEL_BDW_UART2	0x9ce4
+
 #define BYT_PRV_CLK			0x800
 #define BYT_PRV_CLK_EN			(1 << 0)
 #define BYT_PRV_CLK_M_VAL_SHIFT		1
@@ -1461,11 +1464,13 @@ byt_serial_setup(struct serial_private *
 	switch (pdev->device) {
 	case PCI_DEVICE_ID_INTEL_BYT_UART1:
 	case PCI_DEVICE_ID_INTEL_BSW_UART1:
+	case PCI_DEVICE_ID_INTEL_BDW_UART1:
 		rx_param->src_id = 3;
 		tx_param->dst_id = 2;
 		break;
 	case PCI_DEVICE_ID_INTEL_BYT_UART2:
 	case PCI_DEVICE_ID_INTEL_BSW_UART2:
+	case PCI_DEVICE_ID_INTEL_BDW_UART2:
 		rx_param->src_id = 5;
 		tx_param->dst_id = 4;
 		break;
@@ -2063,6 +2068,20 @@ static struct pci_serial_quirk pci_seria
 		.subdevice	= PCI_ANY_ID,
 		.setup		= byt_serial_setup,
 	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_BDW_UART1,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= byt_serial_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_BDW_UART2,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= byt_serial_setup,
+	},
 	/*
 	 * ITE
 	 */
@@ -5522,6 +5541,16 @@ static struct pci_device_id serial_pci_t
 		PCI_ANY_ID,  PCI_ANY_ID,
 		PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
 		pbn_byt },
+
+	/* Intel Broadwell */
+	{	PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BDW_UART1,
+		PCI_ANY_ID,  PCI_ANY_ID,
+		PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
+		pbn_byt },
+	{	PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BDW_UART2,
+		PCI_ANY_ID,  PCI_ANY_ID,
+		PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
+		pbn_byt },
 
 	/*
 	 * Intel Quark x1000


Patches currently in stable-queue which might be from mika.westerberg@linux.intel.com are

queue-4.4/serial-8250_pci-add-intel-broadwell-ports.patch
queue-4.4/scsi-add-marvell-console-to-vpd-blacklist.patch