Patch "dts: vt8500: Add SDHC node to DTS file for WM8650" has been added to the 3.10-stable tree

Patch "dts: vt8500: Add SDHC node to DTS file for WM8650" has been added to the 3.10-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    dts: vt8500: Add SDHC node to DTS file for WM8650

to the 3.10-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     dts-vt8500-add-sdhc-node-to-dts-file-for-wm8650.patch
and it can be found in the queue-3.10 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 0f090bf14e51e7eefb71d9d1c545807f8b627986 Mon Sep 17 00:00:00 2001
From: Roman Volkov <rvolkov@v1ros.org>
Date: Fri, 1 Jan 2016 16:38:11 +0300
Subject: dts: vt8500: Add SDHC node to DTS file for WM8650

From: Roman Volkov <rvolkov@v1ros.org>

commit 0f090bf14e51e7eefb71d9d1c545807f8b627986 upstream.

Since WM8650 has the same 'WMT' SDHC controller as WM8505, and the driver
is already in the kernel, this node enables the controller support for
WM8650

Signed-off-by: Roman Volkov <rvolkov@v1ros.org>
Reviewed-by: Alexey Charkov <alchark@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/wm8650.dtsi |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/arch/arm/boot/dts/wm8650.dtsi
+++ b/arch/arm/boot/dts/wm8650.dtsi
@@ -130,6 +130,15 @@
 			interrupts = <43>;
 		};
 
+		sdhc@d800a000 {
+			compatible = "wm,wm8505-sdhc";
+			reg = <0xd800a000 0x400>;
+			interrupts = <20>, <21>;
+			clocks = <&clksdhc>;
+			bus-width = <4>;
+			sdon-inverted;
+		};
+
 		fb: fb@d8050800 {
 			compatible = "wm,wm8505-fb";
 			reg = <0xd8050800 0x200>;


Patches currently in stable-queue which might be from rvolkov@v1ros.org are

queue-3.10/clocksource-drivers-vt8500-increase-the-minimum-delta.patch
queue-3.10/dts-vt8500-add-sdhc-node-to-dts-file-for-wm8650.patch