From: codekipper@gmail.com (codekipper at gmail.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [linux-sunxi][PATCH v3 3/8] ARM: dts: sun4i: Add the SPDIF clk to the A10
Date: Mon, 21 Mar 2016 21:01:01 +0100 [thread overview]
Message-ID: <1458590466-12572-4-git-send-email-codekipper@gmail.com> (raw)
In-Reply-To: <1458590466-12572-1-git-send-email-codekipper@gmail.com>
From: Marcus Cooper <codekipper@gmail.com>
Add the SPDIF clock to the A10 dtsi.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
arch/arm/boot/dts/sun4i-a10.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 62fcef9..5747522 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -477,6 +477,17 @@
clock-output-names = "ir1";
};
+ spdif_clk: clk at 01c200c0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod1-clk";
+ reg = <0x01c200c0 0x4>;
+ clocks = <&pll2 SUN4I_A10_PLL2_8X>,
+ <&pll2 SUN4I_A10_PLL2_4X>,
+ <&pll2 SUN4I_A10_PLL2_2X>,
+ <&pll2 SUN4I_A10_PLL2_1X>;
+ clock-output-names = "spdif";
+ };
+
usb_clk: clk at 01c200cc {
#clock-cells = <1>;
#reset-cells = <1>;
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
Marcus Cooper
<codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH v3 3/8] ARM: dts: sun4i: Add the SPDIF clk to the A10
Date: Mon, 21 Mar 2016 21:01:01 +0100 [thread overview]
Message-ID: <1458590466-12572-4-git-send-email-codekipper@gmail.com> (raw)
In-Reply-To: <1458590466-12572-1-git-send-email-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Add the SPDIF clock to the A10 dtsi.
Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/sun4i-a10.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 62fcef9..5747522 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -477,6 +477,17 @@
clock-output-names = "ir1";
};
+ spdif_clk: clk@01c200c0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod1-clk";
+ reg = <0x01c200c0 0x4>;
+ clocks = <&pll2 SUN4I_A10_PLL2_8X>,
+ <&pll2 SUN4I_A10_PLL2_4X>,
+ <&pll2 SUN4I_A10_PLL2_2X>,
+ <&pll2 SUN4I_A10_PLL2_1X>;
+ clock-output-names = "spdif";
+ };
+
usb_clk: clk@01c200cc {
#clock-cells = <1>;
#reset-cells = <1>;
--
2.7.4
next prev parent reply other threads:[~2016-03-21 20:01 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-21 20:00 [linux-sunxi][PATCH v3 0/8] ARM: sunxi: Add SPDIF playback support codekipper at gmail.com
2016-03-21 20:00 ` [PATCH " codekipper-Re5JQEeQqe8AvxtiuMwx3w
2016-03-21 20:00 ` [linux-sunxi][PATCH v3 1/8] ARM: dts :sunxi: Add SPDIF TX pin to the A10 codekipper at gmail.com
2016-03-21 20:00 ` [PATCH " codekipper-Re5JQEeQqe8AvxtiuMwx3w
2016-03-21 20:01 ` [linux-sunxi][PATCH v3 2/8] ARM: dts :sun7i: Add SPDIF TX pin to the A20 codekipper at gmail.com
2016-03-21 20:01 ` [PATCH " codekipper-Re5JQEeQqe8AvxtiuMwx3w
2016-03-23 10:28 ` [linux-sunxi][PATCH " Chen-Yu Tsai
2016-03-23 10:28 ` [PATCH " Chen-Yu Tsai
2016-03-24 7:51 ` [linux-sunxi][PATCH " Maxime Ripard
2016-03-24 7:51 ` [PATCH " Maxime Ripard
2016-03-21 20:01 ` codekipper at gmail.com [this message]
2016-03-21 20:01 ` [PATCH v3 3/8] ARM: dts: sun4i: Add the SPDIF clk to the A10 codekipper-Re5JQEeQqe8AvxtiuMwx3w
2016-03-21 20:01 ` [linux-sunxi][PATCH v3 4/8] ARM: dts: sun7i: Add the SPDIF clk to the A20 codekipper at gmail.com
2016-03-21 20:01 ` [PATCH " codekipper-Re5JQEeQqe8AvxtiuMwx3w
2016-03-21 20:01 ` [linux-sunxi][PATCH v3 5/8] ARM: dts: sun4i: Add the SPDIF block to the A10 codekipper at gmail.com
2016-03-21 20:01 ` [PATCH " codekipper-Re5JQEeQqe8AvxtiuMwx3w
2016-03-21 20:01 ` [linux-sunxi][PATCH v3 6/8] ARM: dts: sun7i: Add the SPDIF block to the A20 codekipper at gmail.com
2016-03-21 20:01 ` [PATCH " codekipper-Re5JQEeQqe8AvxtiuMwx3w
2016-03-21 20:01 ` [linux-sunxi][PATCH v3 7/8] ARM: dts: sun4i: Add SPDIF to the Mele A1000 codekipper at gmail.com
2016-03-21 20:01 ` [PATCH " codekipper-Re5JQEeQqe8AvxtiuMwx3w
2016-03-21 20:01 ` [linux-sunxi][PATCH v3 8/8] ARM: dts: sun7i: Add SPDIF to the Itead Ibox codekipper at gmail.com
2016-03-21 20:01 ` [PATCH " codekipper-Re5JQEeQqe8AvxtiuMwx3w
2016-03-22 7:46 ` [linux-sunxi][PATCH v3 0/8] ARM: sunxi: Add SPDIF playback support Maxime Ripard
2016-03-22 7:46 ` [PATCH " Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458590466-12572-4-git-send-email-codekipper@gmail.com \
--to=codekipper@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.