All of lore.kernel.org
 help / color / mirror / Atom feed
From: tthayer@opensource.altera.com (tthayer at opensource.altera.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/7] EDAC, altera: New file operations for Arria10 ECC modules
Date: Wed, 30 Mar 2016 10:27:42 -0500	[thread overview]
Message-ID: <1459351668-14622-2-git-send-email-tthayer@opensource.altera.com> (raw)
In-Reply-To: <1459351668-14622-1-git-send-email-tthayer@opensource.altera.com>

From: Thor Thayer <tthayer@opensource.altera.com>

In preparation for the Arria10 peripheral ECCs, new file
operations are used because the Arria10 IRQ trigger mechanism
is different than Cyclone5/Arria5 and Arria10 L2 cache.

Add new pointer for file operations function to ecc data
structure and point to current file operations function.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
 drivers/edac/altera_edac.c |    5 ++++-
 drivers/edac/altera_edac.h |    1 +
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index 0afdc58..fb6fe56 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -668,7 +668,7 @@ static void altr_create_edacdev_dbgfs(struct edac_device_ctl_info *edac_dci,
 
 	if (!edac_debugfs_create_file(priv->dbgfs_name, S_IWUSR,
 				      drvdata->debugfs_dir, edac_dci,
-				      &altr_edac_device_inject_fops))
+				      priv->inject_fops))
 		debugfs_remove_recursive(drvdata->debugfs_dir);
 }
 
@@ -886,6 +886,7 @@ const struct edac_device_prv_data ocramecc_data = {
 	.ue_set_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_INJD),
 	.set_err_ofst = ALTR_OCR_ECC_REG_OFFSET,
 	.trig_alloc_sz = ALTR_TRIG_OCRAM_BYTE_SIZE,
+	.inject_fops = &altr_edac_device_inject_fops,
 };
 
 #endif	/* CONFIG_EDAC_ALTERA_OCRAM */
@@ -975,6 +976,7 @@ const struct edac_device_prv_data l2ecc_data = {
 	.ue_set_mask = (ALTR_L2_ECC_EN | ALTR_L2_ECC_INJD),
 	.set_err_ofst = ALTR_L2_ECC_REG_OFFSET,
 	.trig_alloc_sz = ALTR_TRIG_L2C_BYTE_SIZE,
+	.inject_fops = &altr_edac_device_inject_fops,
 };
 
 const struct edac_device_prv_data a10_l2ecc_data = {
@@ -991,6 +993,7 @@ const struct edac_device_prv_data a10_l2ecc_data = {
 	.set_err_ofst = ALTR_A10_L2_ECC_INJ_OFST,
 	.ecc_irq_handler = altr_edac_a10_l2_irq,
 	.trig_alloc_sz = ALTR_TRIG_L2C_BYTE_SIZE,
+	.inject_fops = &altr_edac_device_inject_fops,
 };
 
 #endif	/* CONFIG_EDAC_ALTERA_L2C */
diff --git a/drivers/edac/altera_edac.h b/drivers/edac/altera_edac.h
index b0a17d0..c995388 100644
--- a/drivers/edac/altera_edac.h
+++ b/drivers/edac/altera_edac.h
@@ -262,6 +262,7 @@ struct edac_device_prv_data {
 	irqreturn_t (*ecc_irq_handler)(struct altr_edac_device_dev *dci,
 				       bool sb);
 	int trig_alloc_sz;
+	const struct file_operations *inject_fops;
 };
 
 struct altr_edac_device_dev {
-- 
1.7.9.5

WARNING: multiple messages have this Message-ID (diff)
From: <tthayer@opensource.altera.com>
To: bp@alien8.de, dougthompson@xmission.com, m.chehab@samsung.com,
	robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
	ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
	linux@arm.linux.org.uk, dinguyen@opensource.altera.com,
	grant.likely@linaro.org
Cc: devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-edac@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	tthayer@opensource.altera.com
Subject: [PATCH 1/7] EDAC, altera: New file operations for Arria10 ECC modules
Date: Wed, 30 Mar 2016 10:27:42 -0500	[thread overview]
Message-ID: <1459351668-14622-2-git-send-email-tthayer@opensource.altera.com> (raw)
In-Reply-To: <1459351668-14622-1-git-send-email-tthayer@opensource.altera.com>

From: Thor Thayer <tthayer@opensource.altera.com>

In preparation for the Arria10 peripheral ECCs, new file
operations are used because the Arria10 IRQ trigger mechanism
is different than Cyclone5/Arria5 and Arria10 L2 cache.

Add new pointer for file operations function to ecc data
structure and point to current file operations function.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
 drivers/edac/altera_edac.c |    5 ++++-
 drivers/edac/altera_edac.h |    1 +
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index 0afdc58..fb6fe56 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -668,7 +668,7 @@ static void altr_create_edacdev_dbgfs(struct edac_device_ctl_info *edac_dci,
 
 	if (!edac_debugfs_create_file(priv->dbgfs_name, S_IWUSR,
 				      drvdata->debugfs_dir, edac_dci,
-				      &altr_edac_device_inject_fops))
+				      priv->inject_fops))
 		debugfs_remove_recursive(drvdata->debugfs_dir);
 }
 
@@ -886,6 +886,7 @@ const struct edac_device_prv_data ocramecc_data = {
 	.ue_set_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_INJD),
 	.set_err_ofst = ALTR_OCR_ECC_REG_OFFSET,
 	.trig_alloc_sz = ALTR_TRIG_OCRAM_BYTE_SIZE,
+	.inject_fops = &altr_edac_device_inject_fops,
 };
 
 #endif	/* CONFIG_EDAC_ALTERA_OCRAM */
@@ -975,6 +976,7 @@ const struct edac_device_prv_data l2ecc_data = {
 	.ue_set_mask = (ALTR_L2_ECC_EN | ALTR_L2_ECC_INJD),
 	.set_err_ofst = ALTR_L2_ECC_REG_OFFSET,
 	.trig_alloc_sz = ALTR_TRIG_L2C_BYTE_SIZE,
+	.inject_fops = &altr_edac_device_inject_fops,
 };
 
 const struct edac_device_prv_data a10_l2ecc_data = {
@@ -991,6 +993,7 @@ const struct edac_device_prv_data a10_l2ecc_data = {
 	.set_err_ofst = ALTR_A10_L2_ECC_INJ_OFST,
 	.ecc_irq_handler = altr_edac_a10_l2_irq,
 	.trig_alloc_sz = ALTR_TRIG_L2C_BYTE_SIZE,
+	.inject_fops = &altr_edac_device_inject_fops,
 };
 
 #endif	/* CONFIG_EDAC_ALTERA_L2C */
diff --git a/drivers/edac/altera_edac.h b/drivers/edac/altera_edac.h
index b0a17d0..c995388 100644
--- a/drivers/edac/altera_edac.h
+++ b/drivers/edac/altera_edac.h
@@ -262,6 +262,7 @@ struct edac_device_prv_data {
 	irqreturn_t (*ecc_irq_handler)(struct altr_edac_device_dev *dci,
 				       bool sb);
 	int trig_alloc_sz;
+	const struct file_operations *inject_fops;
 };
 
 struct altr_edac_device_dev {
-- 
1.7.9.5

WARNING: multiple messages have this Message-ID (diff)
From: <tthayer@opensource.altera.com>
To: <bp@alien8.de>, <dougthompson@xmission.com>,
	<m.chehab@samsung.com>, <robh+dt@kernel.org>,
	<pawel.moll@arm.com>, <mark.rutland@arm.com>,
	<ijc+devicetree@hellion.org.uk>, <galak@codeaurora.org>,
	<linux@arm.linux.org.uk>, <dinguyen@opensource.altera.com>,
	<grant.likely@linaro.org>
Cc: <devicetree@vger.kernel.org>, <linux-doc@vger.kernel.org>,
	<linux-edac@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<tthayer@opensource.altera.com>
Subject: [PATCH 1/7] EDAC, altera: New file operations for Arria10 ECC modules
Date: Wed, 30 Mar 2016 10:27:42 -0500	[thread overview]
Message-ID: <1459351668-14622-2-git-send-email-tthayer@opensource.altera.com> (raw)
In-Reply-To: <1459351668-14622-1-git-send-email-tthayer@opensource.altera.com>

From: Thor Thayer <tthayer@opensource.altera.com>

In preparation for the Arria10 peripheral ECCs, new file
operations are used because the Arria10 IRQ trigger mechanism
is different than Cyclone5/Arria5 and Arria10 L2 cache.

Add new pointer for file operations function to ecc data
structure and point to current file operations function.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
 drivers/edac/altera_edac.c |    5 ++++-
 drivers/edac/altera_edac.h |    1 +
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index 0afdc58..fb6fe56 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -668,7 +668,7 @@ static void altr_create_edacdev_dbgfs(struct edac_device_ctl_info *edac_dci,
 
 	if (!edac_debugfs_create_file(priv->dbgfs_name, S_IWUSR,
 				      drvdata->debugfs_dir, edac_dci,
-				      &altr_edac_device_inject_fops))
+				      priv->inject_fops))
 		debugfs_remove_recursive(drvdata->debugfs_dir);
 }
 
@@ -886,6 +886,7 @@ const struct edac_device_prv_data ocramecc_data = {
 	.ue_set_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_INJD),
 	.set_err_ofst = ALTR_OCR_ECC_REG_OFFSET,
 	.trig_alloc_sz = ALTR_TRIG_OCRAM_BYTE_SIZE,
+	.inject_fops = &altr_edac_device_inject_fops,
 };
 
 #endif	/* CONFIG_EDAC_ALTERA_OCRAM */
@@ -975,6 +976,7 @@ const struct edac_device_prv_data l2ecc_data = {
 	.ue_set_mask = (ALTR_L2_ECC_EN | ALTR_L2_ECC_INJD),
 	.set_err_ofst = ALTR_L2_ECC_REG_OFFSET,
 	.trig_alloc_sz = ALTR_TRIG_L2C_BYTE_SIZE,
+	.inject_fops = &altr_edac_device_inject_fops,
 };
 
 const struct edac_device_prv_data a10_l2ecc_data = {
@@ -991,6 +993,7 @@ const struct edac_device_prv_data a10_l2ecc_data = {
 	.set_err_ofst = ALTR_A10_L2_ECC_INJ_OFST,
 	.ecc_irq_handler = altr_edac_a10_l2_irq,
 	.trig_alloc_sz = ALTR_TRIG_L2C_BYTE_SIZE,
+	.inject_fops = &altr_edac_device_inject_fops,
 };
 
 #endif	/* CONFIG_EDAC_ALTERA_L2C */
diff --git a/drivers/edac/altera_edac.h b/drivers/edac/altera_edac.h
index b0a17d0..c995388 100644
--- a/drivers/edac/altera_edac.h
+++ b/drivers/edac/altera_edac.h
@@ -262,6 +262,7 @@ struct edac_device_prv_data {
 	irqreturn_t (*ecc_irq_handler)(struct altr_edac_device_dev *dci,
 				       bool sb);
 	int trig_alloc_sz;
+	const struct file_operations *inject_fops;
 };
 
 struct altr_edac_device_dev {
-- 
1.7.9.5

  reply	other threads:[~2016-03-30 15:27 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-30 15:27 [PATCH] Addition of Altera Arria10 On-Chip RAM ECC tthayer at opensource.altera.com
2016-03-30 15:27 ` tthayer
2016-03-30 15:27 ` tthayer
2016-03-30 15:27 ` tthayer at opensource.altera.com [this message]
2016-03-30 15:27   ` [PATCH 1/7] EDAC, altera: New file operations for Arria10 ECC modules tthayer
2016-03-30 15:27   ` tthayer
2016-03-30 15:27 ` [PATCH 2/7] EDAC, altera: Add register offset for ECC Enable tthayer at opensource.altera.com
2016-03-30 15:27   ` tthayer
2016-03-30 15:27   ` tthayer
2016-03-30 15:27 ` [PATCH 3/7] EDAC, altera: Make OCRAM ECC dependency check generic tthayer at opensource.altera.com
2016-03-30 15:27   ` tthayer
2016-03-30 15:27   ` tthayer
2016-03-30 15:27 ` [PATCH 4/7] Documentation: dt: socfpga: Add Altera Arria10 OCRAM binding tthayer at opensource.altera.com
2016-03-30 15:27   ` tthayer
2016-03-30 15:27   ` tthayer
2016-04-01 17:03   ` Rob Herring
2016-04-01 17:03     ` Rob Herring
2016-04-01 17:03     ` Rob Herring
2016-03-30 15:27 ` [PATCH 5/7] EDAC, altera: Addition of Arria10 OCRAM ECC tthayer at opensource.altera.com
2016-03-30 15:27   ` tthayer
2016-03-30 15:27   ` tthayer
2016-03-30 15:27 ` [PATCH 6/7] ARM: socfpga: Enable Arria10 OCRAM ECC on startup tthayer at opensource.altera.com
2016-03-30 15:27   ` tthayer
2016-03-30 15:27   ` tthayer
2016-03-30 17:11   ` Dinh Nguyen
2016-03-30 17:11     ` Dinh Nguyen
2016-03-30 17:11     ` Dinh Nguyen
2016-03-31 16:08     ` Thor Thayer
2016-03-31 16:08       ` Thor Thayer
2016-03-31 16:08       ` Thor Thayer
2016-03-30 15:27 ` [PATCH 7/7] ARM: dts: Add Altera Arria10 OCRAM EDAC devicetree entry tthayer at opensource.altera.com
2016-03-30 15:27   ` tthayer
2016-03-30 15:27   ` tthayer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1459351668-14622-2-git-send-email-tthayer@opensource.altera.com \
    --to=tthayer@opensource.altera.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.