Adding Demo Utilities to /proc

Adding Demo Utilities to /proc

[Haleigh Novak]

[-- Attachment #1: Type: text/plain, Size: 2171 bytes --]

Hello All,


Firstly I would like to say that I am new here and fairly new to Yocto, so I do apologize if this is the wrong board for this question. (And if it is could someone direct me to the correct board?) Background on me: graduated OSU before Fall 2015 started with a BA Computer Science Computer Systems - minimal yocto ~2 months baby level stuff.


Some background on the issue: I am following these directions http://www.crashcourse.ca/introduction-linux-kernel-programming/lesson-11-adding-proc-files-your-modules-part-1 to create a jiffies utility  folder in /proc as a precursor to a larger project. I have made the appropriate changes within the /usr/src/kernel/fs/proc folder and now I am trying to compile and load the module, to place a jiffies entry in /proc. Well when I run 'make' from /usr/src/kernel/ I get most of the way through, way past building my jiffies.o file in user/src/kernel/fs/proc, without errors but toward the end I get the following error.


LZO     arch/arm/boot/compressed/piggy.lzo
/bin/sh: lzop: command not found
/usr/src/kernel/arch/arm/boot/compressed/Makefile:193: recipe for target 'arch/arm/boot/compressed/piggy.lzo' failed
make[2]: *** [arch/arm/boot/compressed/piggy.lzo] Error 1
/usr/src/kernel/arch/arm/boot/Makefile:52: recipe for target 'arch/arm/boot/compressed/vmlinux' failed
make[1]: *** [arch/arm/boot/compressed/vmlinux] Error 2
/usr/src/kernel/arch/arm/Makefile:305: recipe for target 'zImage' failed
make: *** [zImage] Error 2

I had not though to try to 'make' in this manner before I attempted this project so I don't know if this worked originally. My yocto build is located on one host machine and the actual implementation / working area is on another with an arm processor. I ssh into my device that the yocto build is for and from there I work with the code. If I try to 'make' on the host machine I get an error that it can not find/access some generated files so  hat option I think is out and googling only resulted in that type of solution one to be done on my host machine.

Has anyone ever had this problem before or could point me in a better direction?

Thank you.

H

[-- Attachment #2: Type: text/html, Size: 3066 bytes --]

Re: Adding Demo Utilities to /proc

[Rudolf Streif]

[-- Attachment #1: Type: text/plain, Size: 2517 bytes --]

Hi Haleigh,

This is your clue

>/bin/sh: lzop: command not found

You need to install it on your dev box, e.g. for Ubuntu

sudo apt-get install lzop

Cheers,
Rudi

Hello All,


Firstly I would like to say that I am new here and fairly new to Yocto, so
I do apologize if this is the wrong board for this question. (And if it is
could someone direct me to the correct board?) Background on me: graduated
OSU before Fall 2015 started with a BA Computer Science Computer Systems
- minimal yocto ~2 months baby level stuff.


Some background on the issue: I am following these directions
http://www.crashcourse.ca/introduction-linux-kernel-programming/lesson-11-adding-proc-files-your-modules-part-1
to create a jiffies utility  folder in /proc as a precursor to a larger
project. I have made the appropriate changes within the
/usr/src/kernel/fs/proc folder and now I am trying to compile and load the
module, to place a jiffies entry in /proc. Well when I run 'make' from
/usr/src/kernel/ I get most of the way through, way past building my
jiffies.o file in user/src/kernel/fs/proc, without errors but toward the
end I get the following error.


LZO     arch/arm/boot/compressed/piggy.lzo
/bin/sh: lzop: command not found
/usr/src/kernel/arch/arm/boot/compressed/Makefile:193: recipe for target
'arch/arm/boot/compressed/piggy.lzo' failed
make[2]: *** [arch/arm/boot/compressed/piggy.lzo] Error 1
/usr/src/kernel/arch/arm/boot/Makefile:52: recipe for target
'arch/arm/boot/compressed/vmlinux' failed
make[1]: *** [arch/arm/boot/compressed/vmlinux] Error 2
/usr/src/kernel/arch/arm/Makefile:305: recipe for target 'zImage' failed
make: *** [zImage] Error 2

I had not though to try to 'make' in this manner before I attempted this
project so I don't know if this worked originally. My yocto build is
located on one host machine and the actual implementation / working area is
on another with an arm processor. I ssh into my device that the yocto build
is for and from there I work with the code. If I try to 'make' on the host
machine I get an error that it can not find/access some generated files so
 hat option I think is out and googling only resulted in that type of
solution one to be done on my host machine.

Has anyone ever had this problem before or could point me in a better
direction?

Thank you.

H

--
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto

[-- Attachment #2: Type: text/html, Size: 3551 bytes --]