From: <gregkh@linuxfoundation.org>
To: hverkuil@xs4all.nl, gregkh@linuxfoundation.org,
hans.verkuil@cisco.com, mchehab@osg.samsung.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "[media] adv7511: TX_EDID_PRESENT is still 1 after a disconnect" has been added to the 4.4-stable tree
Date: Sat, 09 Apr 2016 17:40:51 -0700 [thread overview]
Message-ID: <146024885169182@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
[media] adv7511: TX_EDID_PRESENT is still 1 after a disconnect
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
adv7511-tx_edid_present-is-still-1-after-a-disconnect.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From b339a72e04a62f0b1882c43492fc712f1176b3e6 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Wed, 10 Feb 2016 09:32:25 -0200
Subject: [media] adv7511: TX_EDID_PRESENT is still 1 after a disconnect
From: Hans Verkuil <hverkuil@xs4all.nl>
commit b339a72e04a62f0b1882c43492fc712f1176b3e6 upstream.
The V4L2_CID_TX_EDID_PRESENT control reports if an EDID is present.
The adv7511 however still reported the EDID present after disconnecting
the HDMI cable. Fix the logic regarding this control. And when the EDID
is disconnected also call ADV7511_EDID_DETECT to notify the bridge driver.
This was also missing.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/media/i2c/adv7511.c | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)
--- a/drivers/media/i2c/adv7511.c
+++ b/drivers/media/i2c/adv7511.c
@@ -1161,12 +1161,23 @@ static void adv7511_dbg_dump_edid(int lv
}
}
+static void adv7511_notify_no_edid(struct v4l2_subdev *sd)
+{
+ struct adv7511_state *state = get_adv7511_state(sd);
+ struct adv7511_edid_detect ed;
+
+ /* We failed to read the EDID, so send an event for this. */
+ ed.present = false;
+ ed.segment = adv7511_rd(sd, 0xc4);
+ v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed);
+ v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, 0x0);
+}
+
static void adv7511_edid_handler(struct work_struct *work)
{
struct delayed_work *dwork = to_delayed_work(work);
struct adv7511_state *state = container_of(dwork, struct adv7511_state, edid_handler);
struct v4l2_subdev *sd = &state->sd;
- struct adv7511_edid_detect ed;
v4l2_dbg(1, debug, sd, "%s:\n", __func__);
@@ -1191,9 +1202,7 @@ static void adv7511_edid_handler(struct
}
/* We failed to read the EDID, so send an event for this. */
- ed.present = false;
- ed.segment = adv7511_rd(sd, 0xc4);
- v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed);
+ adv7511_notify_no_edid(sd);
v4l2_dbg(1, debug, sd, "%s: no edid found\n", __func__);
}
@@ -1264,7 +1273,6 @@ static void adv7511_check_monitor_presen
/* update read only ctrls */
v4l2_ctrl_s_ctrl(state->hotplug_ctrl, adv7511_have_hotplug(sd) ? 0x1 : 0x0);
v4l2_ctrl_s_ctrl(state->rx_sense_ctrl, adv7511_have_rx_sense(sd) ? 0x1 : 0x0);
- v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0);
if ((status & MASK_ADV7511_HPD_DETECT) && ((status & MASK_ADV7511_MSEN_DETECT) || state->edid.segments)) {
v4l2_dbg(1, debug, sd, "%s: hotplug and (rx-sense or edid)\n", __func__);
@@ -1294,6 +1302,7 @@ static void adv7511_check_monitor_presen
}
adv7511_s_power(sd, false);
memset(&state->edid, 0, sizeof(struct adv7511_state_edid));
+ adv7511_notify_no_edid(sd);
}
}
@@ -1370,6 +1379,7 @@ static bool adv7511_check_edid_status(st
}
/* one more segment read ok */
state->edid.segments = segment + 1;
+ v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, 0x1);
if (((state->edid.data[0x7e] >> 1) + 1) > state->edid.segments) {
/* Request next EDID segment */
v4l2_dbg(1, debug, sd, "%s: request segment %d\n", __func__, state->edid.segments);
@@ -1389,7 +1399,6 @@ static bool adv7511_check_edid_status(st
ed.present = true;
ed.segment = 0;
state->edid_detect_counter++;
- v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0);
v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed);
return ed.present;
}
Patches currently in stable-queue which might be from hverkuil@xs4all.nl are
queue-4.4/adv7511-tx_edid_present-is-still-1-after-a-disconnect.patch
queue-4.4/sched-preempt-sh-kmap_coherent-relies-on-disabled-preemption.patch
reply other threads:[~2016-04-10 0:40 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=146024885169182@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=hans.verkuil@cisco.com \
--cc=hverkuil@xs4all.nl \
--cc=mchehab@osg.samsung.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.