Patch "[media] adv7511: TX_EDID_PRESENT is still 1 after a disconnect" has been added to the 4.4-stable tree

Patch "[media] adv7511: TX_EDID_PRESENT is still 1 after a disconnect" has been added to the 4.4-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    [media] adv7511: TX_EDID_PRESENT is still 1 after a disconnect

to the 4.4-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     adv7511-tx_edid_present-is-still-1-after-a-disconnect.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From b339a72e04a62f0b1882c43492fc712f1176b3e6 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Wed, 10 Feb 2016 09:32:25 -0200
Subject: [media] adv7511: TX_EDID_PRESENT is still 1 after a disconnect

From: Hans Verkuil <hverkuil@xs4all.nl>

commit b339a72e04a62f0b1882c43492fc712f1176b3e6 upstream.

The V4L2_CID_TX_EDID_PRESENT control reports if an EDID is present.
The adv7511 however still reported the EDID present after disconnecting
the HDMI cable. Fix the logic regarding this control. And when the EDID
is disconnected also call ADV7511_EDID_DETECT to notify the bridge driver.
This was also missing.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/i2c/adv7511.c |   21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)

--- a/drivers/media/i2c/adv7511.c
+++ b/drivers/media/i2c/adv7511.c
@@ -1161,12 +1161,23 @@ static void adv7511_dbg_dump_edid(int lv
 	}
 }
 
+static void adv7511_notify_no_edid(struct v4l2_subdev *sd)
+{
+	struct adv7511_state *state = get_adv7511_state(sd);
+	struct adv7511_edid_detect ed;
+
+	/* We failed to read the EDID, so send an event for this. */
+	ed.present = false;
+	ed.segment = adv7511_rd(sd, 0xc4);
+	v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed);
+	v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, 0x0);
+}
+
 static void adv7511_edid_handler(struct work_struct *work)
 {
 	struct delayed_work *dwork = to_delayed_work(work);
 	struct adv7511_state *state = container_of(dwork, struct adv7511_state, edid_handler);
 	struct v4l2_subdev *sd = &state->sd;
-	struct adv7511_edid_detect ed;
 
 	v4l2_dbg(1, debug, sd, "%s:\n", __func__);
 
@@ -1191,9 +1202,7 @@ static void adv7511_edid_handler(struct
 	}
 
 	/* We failed to read the EDID, so send an event for this. */
-	ed.present = false;
-	ed.segment = adv7511_rd(sd, 0xc4);
-	v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed);
+	adv7511_notify_no_edid(sd);
 	v4l2_dbg(1, debug, sd, "%s: no edid found\n", __func__);
 }
 
@@ -1264,7 +1273,6 @@ static void adv7511_check_monitor_presen
 	/* update read only ctrls */
 	v4l2_ctrl_s_ctrl(state->hotplug_ctrl, adv7511_have_hotplug(sd) ? 0x1 : 0x0);
 	v4l2_ctrl_s_ctrl(state->rx_sense_ctrl, adv7511_have_rx_sense(sd) ? 0x1 : 0x0);
-	v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0);
 
 	if ((status & MASK_ADV7511_HPD_DETECT) && ((status & MASK_ADV7511_MSEN_DETECT) || state->edid.segments)) {
 		v4l2_dbg(1, debug, sd, "%s: hotplug and (rx-sense or edid)\n", __func__);
@@ -1294,6 +1302,7 @@ static void adv7511_check_monitor_presen
 		}
 		adv7511_s_power(sd, false);
 		memset(&state->edid, 0, sizeof(struct adv7511_state_edid));
+		adv7511_notify_no_edid(sd);
 	}
 }
 
@@ -1370,6 +1379,7 @@ static bool adv7511_check_edid_status(st
 		}
 		/* one more segment read ok */
 		state->edid.segments = segment + 1;
+		v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, 0x1);
 		if (((state->edid.data[0x7e] >> 1) + 1) > state->edid.segments) {
 			/* Request next EDID segment */
 			v4l2_dbg(1, debug, sd, "%s: request segment %d\n", __func__, state->edid.segments);
@@ -1389,7 +1399,6 @@ static bool adv7511_check_edid_status(st
 		ed.present = true;
 		ed.segment = 0;
 		state->edid_detect_counter++;
-		v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0);
 		v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed);
 		return ed.present;
 	}


Patches currently in stable-queue which might be from hverkuil@xs4all.nl are

queue-4.4/adv7511-tx_edid_present-is-still-1-after-a-disconnect.patch
queue-4.4/sched-preempt-sh-kmap_coherent-relies-on-disabled-preemption.patch