From: "Dr. David Alan Gilbert (git)" <dgilbert@redhat.com>
To: qemu-devel@nongnu.org, quintela@redhat.com, amit.shah@redhat.com
Cc: aarcange@redhat.com, den@openvz.org, marcel.a@redhat.com,
eblake@redhat.com
Subject: [Qemu-devel] [PATCH v2 2/5] Migration: Split out ram part of qmp_query_migrate
Date: Fri, 29 Apr 2016 15:47:40 +0100 [thread overview]
Message-ID: <1461941263-9523-3-git-send-email-dgilbert@redhat.com> (raw)
In-Reply-To: <1461941263-9523-1-git-send-email-dgilbert@redhat.com>
From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
The RAM section of qmp_query_migrate is reasonably complex
and repeated 3 times. Split it out into a helper.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
migration/migration.c | 57 ++++++++++++++++++++-------------------------------
1 file changed, 22 insertions(+), 35 deletions(-)
diff --git a/migration/migration.c b/migration/migration.c
index 991313a..bfb326d 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -561,6 +561,25 @@ static void get_xbzrle_cache_stats(MigrationInfo *info)
}
}
+static void populate_ram_info(MigrationInfo *info, MigrationState *s)
+{
+ info->has_ram = true;
+ info->ram = g_malloc0(sizeof(*info->ram));
+ info->ram->transferred = ram_bytes_transferred();
+ info->ram->total = ram_bytes_total();
+ info->ram->duplicate = dup_mig_pages_transferred();
+ info->ram->skipped = skipped_mig_pages_transferred();
+ info->ram->normal = norm_mig_pages_transferred();
+ info->ram->normal_bytes = norm_mig_bytes_transferred();
+ info->ram->mbps = s->mbps;
+ info->ram->dirty_sync_count = s->dirty_sync_count;
+
+ if (s->state != MIGRATION_STATUS_COMPLETED) {
+ info->ram->remaining = ram_bytes_remaining();
+ info->ram->dirty_pages_rate = s->dirty_pages_rate;
+ }
+}
+
MigrationInfo *qmp_query_migrate(Error **errp)
{
MigrationInfo *info = g_malloc0(sizeof(*info));
@@ -585,18 +604,7 @@ MigrationInfo *qmp_query_migrate(Error **errp)
info->has_setup_time = true;
info->setup_time = s->setup_time;
- info->has_ram = true;
- info->ram = g_malloc0(sizeof(*info->ram));
- info->ram->transferred = ram_bytes_transferred();
- info->ram->remaining = ram_bytes_remaining();
- info->ram->total = ram_bytes_total();
- info->ram->duplicate = dup_mig_pages_transferred();
- info->ram->skipped = skipped_mig_pages_transferred();
- info->ram->normal = norm_mig_pages_transferred();
- info->ram->normal_bytes = norm_mig_bytes_transferred();
- info->ram->dirty_pages_rate = s->dirty_pages_rate;
- info->ram->mbps = s->mbps;
- info->ram->dirty_sync_count = s->dirty_sync_count;
+ populate_ram_info(info, s);
if (blk_mig_active()) {
info->has_disk = true;
@@ -624,18 +632,7 @@ MigrationInfo *qmp_query_migrate(Error **errp)
info->has_setup_time = true;
info->setup_time = s->setup_time;
- info->has_ram = true;
- info->ram = g_malloc0(sizeof(*info->ram));
- info->ram->transferred = ram_bytes_transferred();
- info->ram->remaining = ram_bytes_remaining();
- info->ram->total = ram_bytes_total();
- info->ram->duplicate = dup_mig_pages_transferred();
- info->ram->skipped = skipped_mig_pages_transferred();
- info->ram->normal = norm_mig_pages_transferred();
- info->ram->normal_bytes = norm_mig_bytes_transferred();
- info->ram->dirty_pages_rate = s->dirty_pages_rate;
- info->ram->mbps = s->mbps;
- info->ram->dirty_sync_count = s->dirty_sync_count;
+ populate_ram_info(info, s);
if (blk_mig_active()) {
info->has_disk = true;
@@ -658,17 +655,7 @@ MigrationInfo *qmp_query_migrate(Error **errp)
info->has_setup_time = true;
info->setup_time = s->setup_time;
- info->has_ram = true;
- info->ram = g_malloc0(sizeof(*info->ram));
- info->ram->transferred = ram_bytes_transferred();
- info->ram->remaining = 0;
- info->ram->total = ram_bytes_total();
- info->ram->duplicate = dup_mig_pages_transferred();
- info->ram->skipped = skipped_mig_pages_transferred();
- info->ram->normal = norm_mig_pages_transferred();
- info->ram->normal_bytes = norm_mig_bytes_transferred();
- info->ram->mbps = s->mbps;
- info->ram->dirty_sync_count = s->dirty_sync_count;
+ populate_ram_info(info, s);
break;
case MIGRATION_STATUS_FAILED:
info->has_status = true;
--
2.5.5
next prev parent reply other threads:[~2016-04-29 14:48 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-29 14:47 [Qemu-devel] [PATCH v2 0/5] postcopy (& 1 test) patch for 2.7 Dr. David Alan Gilbert (git)
2016-04-29 14:47 ` [Qemu-devel] [PATCH v2 1/5] Postcopy: Avoid 0 length discards Dr. David Alan Gilbert (git)
2016-04-29 15:03 ` Denis V. Lunev
2016-04-29 14:47 ` Dr. David Alan Gilbert (git) [this message]
2016-04-29 14:56 ` [Qemu-devel] [PATCH v2 2/5] Migration: Split out ram part of qmp_query_migrate Eric Blake
2016-04-29 15:02 ` Denis V. Lunev
2016-04-29 14:47 ` [Qemu-devel] [PATCH v2 3/5] Postcopy: Add stats on page requests Dr. David Alan Gilbert (git)
2016-04-29 14:57 ` Eric Blake
2016-04-29 15:03 ` Denis V. Lunev
2016-04-29 14:47 ` [Qemu-devel] [PATCH v2 4/5] test: Postcopy Dr. David Alan Gilbert (git)
2016-05-01 8:44 ` Marcel Apfelbaum
2016-05-03 9:22 ` Dr. David Alan Gilbert
2016-05-03 10:05 ` Marcel Apfelbaum
2016-05-03 10:34 ` Dr. David Alan Gilbert
2016-05-03 10:42 ` Marcel Apfelbaum
2016-05-06 12:35 ` Dr. David Alan Gilbert
2016-04-29 14:47 ` [Qemu-devel] [PATCH v2 5/5] tests: fix libqtest socket timeouts Dr. David Alan Gilbert (git)
2016-05-01 8:22 ` Marcel Apfelbaum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461941263-9523-3-git-send-email-dgilbert@redhat.com \
--to=dgilbert@redhat.com \
--cc=aarcange@redhat.com \
--cc=amit.shah@redhat.com \
--cc=den@openvz.org \
--cc=eblake@redhat.com \
--cc=marcel.a@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.