From: Rajendra Nayak <rnayak@codeaurora.org>
To: edubezval@gmail.com, andy.gross@linaro.org
Cc: linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, rui.zhang@intel.com,
sboyd@codeaurora.org, nrajan@codeaurora.org,
lina.iyer@linaro.org, punit.agrawal@arm.com,
Rajendra Nayak <rnayak@codeaurora.org>
Subject: [PATCH v6 00/11] qcom: Add support for TSENS driver
Date: Thu, 5 May 2016 14:21:38 +0530 [thread overview]
Message-ID: <1462438309-11196-1-git-send-email-rnayak@codeaurora.org> (raw)
Current set of patches apply on 4.6-rc6. Fixes for the nvmem apis
are now posted [1] and queued in -next [2]
Patches [1-6] will need to be merged via thermal tree/Eduardo.
Patches [7-11] will need to go via qcom-msm tree/Andy.
Changes since v5:
* Minor review fixes from Eduardo
Changes since v4:
* dropped qcom,tsens-slopes binding, used coefficients instead
* dropped qcom,sensor-id binding
* Added support for msm8996 family
* Other minor review fixes from v4
Changes since v3:
* Dropped 'clk: qcom: create virtual child device for TSENS' which
is picked up by Stephen
* Updated GCC bindings with optional TSENS properties
Changes since v2:
* Minor review fixes from Stephen/Punit and rebase on 4.3-rc4
Changes since v1:
* Created virtual tsens device from gcc driver for 8960,
with DT having a single node for gcc and tsens
* Minor fixes with rebasing on 4.3-rc1
Changes since RFC:
* Added support for 8916 and 8084
* Based off the latest nvmem framework patches [1]
* Minor review fixes for comments mostly from Lina
This is an attempt to have a single TSENS driver for
the different versions of the TSENS IP that exist, on
different qcom msm/apq SoCs'
Support is added for msm8916, msm8960, msm8974 and msm8996 families.
A lot of the work is based of original code from Stephen Boyd
and Siddartha Mohanadoss. I have also picked some of what
Narendran Rajan did in his attempt to upstream the support
for 8960 family. I could not keep the original authorship on
any of the patches because I ended up moving the code around
quite a bit in an effort to have a single driver for the
various devices. I would be glad to change the authorship
for any of the patches if needed.
[1] https://lkml.org/lkml/2016/4/24/103
[2] git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git char-misc-next
Rajendra Nayak (11):
thermal: qcom: tsens: Add a skeletal TSENS drivers
thermal: qcom: tsens-8916: Add support for 8916 family of SoCs
thermal: qcom: tsens-8974: Add support for 8974 family of SoCs
thermal: core: export apis to get slope and offset
thermal: qcom: tsens-8960: Add support for 8960 family of SoCs
thermal: qcom: tsens-8996: Add support for 8996 family of SoCs
arm: dts: msm8974: Add thermal zones, tsens and qfprom nodes
arm: dts: apq8064: Add thermal zones, tsens and qfprom nodes
arm: dts: apq8084: Add thermal zones, tsens and qfprom nodes
arm64: dts: msm8916: Add thermal zones, tsens and qfprom nodes
arm64: dts: msm8996: Add thermal zones, tsens and qfprom nodes
.../devicetree/bindings/clock/qcom,gcc.txt | 18 ++
.../devicetree/bindings/thermal/qcom-tsens.txt | 21 ++
Documentation/thermal/sysfs-api.txt | 12 +
arch/arm/boot/dts/qcom-apq8064.dtsi | 103 ++++++++
arch/arm/boot/dts/qcom-apq8084.dtsi | 103 ++++++++
arch/arm/boot/dts/qcom-msm8974.dtsi | 103 ++++++++
arch/arm64/boot/dts/qcom/msm8916.dtsi | 64 +++++
arch/arm64/boot/dts/qcom/msm8996.dtsi | 92 +++++++
drivers/thermal/Kconfig | 5 +
drivers/thermal/Makefile | 1 +
drivers/thermal/qcom/Kconfig | 11 +
drivers/thermal/qcom/Makefile | 2 +
drivers/thermal/qcom/tsens-8916.c | 113 ++++++++
drivers/thermal/qcom/tsens-8960.c | 292 +++++++++++++++++++++
drivers/thermal/qcom/tsens-8974.c | 244 +++++++++++++++++
drivers/thermal/qcom/tsens-8996.c | 84 ++++++
drivers/thermal/qcom/tsens-common.c | 141 ++++++++++
drivers/thermal/qcom/tsens.c | 200 ++++++++++++++
drivers/thermal/qcom/tsens.h | 92 +++++++
drivers/thermal/thermal_core.c | 30 +++
include/linux/thermal.h | 8 +
21 files changed, 1739 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/qcom-tsens.txt
create mode 100644 drivers/thermal/qcom/Kconfig
create mode 100644 drivers/thermal/qcom/Makefile
create mode 100644 drivers/thermal/qcom/tsens-8916.c
create mode 100644 drivers/thermal/qcom/tsens-8960.c
create mode 100644 drivers/thermal/qcom/tsens-8974.c
create mode 100644 drivers/thermal/qcom/tsens-8996.c
create mode 100644 drivers/thermal/qcom/tsens-common.c
create mode 100644 drivers/thermal/qcom/tsens.c
create mode 100644 drivers/thermal/qcom/tsens.h
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
WARNING: multiple messages have this Message-ID (diff)
From: rnayak@codeaurora.org (Rajendra Nayak)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 00/11] qcom: Add support for TSENS driver
Date: Thu, 5 May 2016 14:21:38 +0530 [thread overview]
Message-ID: <1462438309-11196-1-git-send-email-rnayak@codeaurora.org> (raw)
Current set of patches apply on 4.6-rc6. Fixes for the nvmem apis
are now posted [1] and queued in -next [2]
Patches [1-6] will need to be merged via thermal tree/Eduardo.
Patches [7-11] will need to go via qcom-msm tree/Andy.
Changes since v5:
* Minor review fixes from Eduardo
Changes since v4:
* dropped qcom,tsens-slopes binding, used coefficients instead
* dropped qcom,sensor-id binding
* Added support for msm8996 family
* Other minor review fixes from v4
Changes since v3:
* Dropped 'clk: qcom: create virtual child device for TSENS' which
is picked up by Stephen
* Updated GCC bindings with optional TSENS properties
Changes since v2:
* Minor review fixes from Stephen/Punit and rebase on 4.3-rc4
Changes since v1:
* Created virtual tsens device from gcc driver for 8960,
with DT having a single node for gcc and tsens
* Minor fixes with rebasing on 4.3-rc1
Changes since RFC:
* Added support for 8916 and 8084
* Based off the latest nvmem framework patches [1]
* Minor review fixes for comments mostly from Lina
This is an attempt to have a single TSENS driver for
the different versions of the TSENS IP that exist, on
different qcom msm/apq SoCs'
Support is added for msm8916, msm8960, msm8974 and msm8996 families.
A lot of the work is based of original code from Stephen Boyd
and Siddartha Mohanadoss. I have also picked some of what
Narendran Rajan did in his attempt to upstream the support
for 8960 family. I could not keep the original authorship on
any of the patches because I ended up moving the code around
quite a bit in an effort to have a single driver for the
various devices. I would be glad to change the authorship
for any of the patches if needed.
[1] https://lkml.org/lkml/2016/4/24/103
[2] git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git char-misc-next
Rajendra Nayak (11):
thermal: qcom: tsens: Add a skeletal TSENS drivers
thermal: qcom: tsens-8916: Add support for 8916 family of SoCs
thermal: qcom: tsens-8974: Add support for 8974 family of SoCs
thermal: core: export apis to get slope and offset
thermal: qcom: tsens-8960: Add support for 8960 family of SoCs
thermal: qcom: tsens-8996: Add support for 8996 family of SoCs
arm: dts: msm8974: Add thermal zones, tsens and qfprom nodes
arm: dts: apq8064: Add thermal zones, tsens and qfprom nodes
arm: dts: apq8084: Add thermal zones, tsens and qfprom nodes
arm64: dts: msm8916: Add thermal zones, tsens and qfprom nodes
arm64: dts: msm8996: Add thermal zones, tsens and qfprom nodes
.../devicetree/bindings/clock/qcom,gcc.txt | 18 ++
.../devicetree/bindings/thermal/qcom-tsens.txt | 21 ++
Documentation/thermal/sysfs-api.txt | 12 +
arch/arm/boot/dts/qcom-apq8064.dtsi | 103 ++++++++
arch/arm/boot/dts/qcom-apq8084.dtsi | 103 ++++++++
arch/arm/boot/dts/qcom-msm8974.dtsi | 103 ++++++++
arch/arm64/boot/dts/qcom/msm8916.dtsi | 64 +++++
arch/arm64/boot/dts/qcom/msm8996.dtsi | 92 +++++++
drivers/thermal/Kconfig | 5 +
drivers/thermal/Makefile | 1 +
drivers/thermal/qcom/Kconfig | 11 +
drivers/thermal/qcom/Makefile | 2 +
drivers/thermal/qcom/tsens-8916.c | 113 ++++++++
drivers/thermal/qcom/tsens-8960.c | 292 +++++++++++++++++++++
drivers/thermal/qcom/tsens-8974.c | 244 +++++++++++++++++
drivers/thermal/qcom/tsens-8996.c | 84 ++++++
drivers/thermal/qcom/tsens-common.c | 141 ++++++++++
drivers/thermal/qcom/tsens.c | 200 ++++++++++++++
drivers/thermal/qcom/tsens.h | 92 +++++++
drivers/thermal/thermal_core.c | 30 +++
include/linux/thermal.h | 8 +
21 files changed, 1739 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/qcom-tsens.txt
create mode 100644 drivers/thermal/qcom/Kconfig
create mode 100644 drivers/thermal/qcom/Makefile
create mode 100644 drivers/thermal/qcom/tsens-8916.c
create mode 100644 drivers/thermal/qcom/tsens-8960.c
create mode 100644 drivers/thermal/qcom/tsens-8974.c
create mode 100644 drivers/thermal/qcom/tsens-8996.c
create mode 100644 drivers/thermal/qcom/tsens-common.c
create mode 100644 drivers/thermal/qcom/tsens.c
create mode 100644 drivers/thermal/qcom/tsens.h
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next reply other threads:[~2016-05-05 8:51 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-05 8:51 Rajendra Nayak [this message]
2016-05-05 8:51 ` [PATCH v6 00/11] qcom: Add support for TSENS driver Rajendra Nayak
2016-05-05 8:51 ` [PATCH v6 01/11] thermal: qcom: tsens: Add a skeletal TSENS drivers Rajendra Nayak
2016-05-05 8:51 ` Rajendra Nayak
2016-05-05 8:51 ` [PATCH v6 02/11] thermal: qcom: tsens-8916: Add support for 8916 family of SoCs Rajendra Nayak
2016-05-05 8:51 ` Rajendra Nayak
2016-05-05 8:51 ` [PATCH v6 03/11] thermal: qcom: tsens-8974: Add support for 8974 " Rajendra Nayak
2016-05-05 8:51 ` Rajendra Nayak
2016-05-05 8:51 ` [PATCH v6 04/11] thermal: core: export apis to get slope and offset Rajendra Nayak
2016-05-05 8:51 ` Rajendra Nayak
2016-05-05 8:51 ` [PATCH v6 05/11] thermal: qcom: tsens-8960: Add support for 8960 family of SoCs Rajendra Nayak
2016-05-05 8:51 ` Rajendra Nayak
2016-05-05 8:51 ` [PATCH v6 06/11] thermal: qcom: tsens-8996: Add support for 8996 " Rajendra Nayak
2016-05-05 8:51 ` Rajendra Nayak
2016-05-05 8:51 ` [PATCH v6 07/11] arm: dts: msm8974: Add thermal zones, tsens and qfprom nodes Rajendra Nayak
2016-05-05 8:51 ` Rajendra Nayak
2016-07-02 1:19 ` Eduardo Valentin
2016-07-02 1:19 ` Eduardo Valentin
2016-05-05 8:51 ` [PATCH v6 08/11] arm: dts: apq8064: " Rajendra Nayak
2016-05-05 8:51 ` Rajendra Nayak
2016-05-05 8:51 ` [PATCH v6 09/11] arm: dts: apq8084: " Rajendra Nayak
2016-05-05 8:51 ` Rajendra Nayak
2016-05-05 8:51 ` [PATCH v6 10/11] arm64: dts: msm8916: " Rajendra Nayak
2016-05-05 8:51 ` Rajendra Nayak
2016-05-05 8:51 ` [PATCH v6 11/11] arm64: dts: msm8996: " Rajendra Nayak
2016-05-05 8:51 ` Rajendra Nayak
2016-06-10 6:02 ` [PATCH v6 00/11] qcom: Add support for TSENS driver Rajendra Nayak
2016-06-10 6:02 ` Rajendra Nayak
2016-06-17 5:59 ` Nayak, Rajendra
2016-06-17 5:59 ` Nayak, Rajendra
2016-06-30 4:25 ` Rajendra Nayak
2016-06-30 4:25 ` Rajendra Nayak
2016-07-01 20:52 ` Eduardo Valentin
2016-07-01 20:52 ` Eduardo Valentin
2016-07-02 1:23 ` Eduardo Valentin
2016-07-02 1:23 ` Eduardo Valentin
2016-07-04 8:04 ` Nayak, Rajendra
2016-07-04 8:04 ` Nayak, Rajendra
2016-07-28 8:33 ` Zhang Rui
2016-07-28 8:33 ` Zhang Rui
2016-07-28 8:55 ` Zhang Rui
2016-07-28 8:55 ` Zhang Rui
2016-08-09 3:51 ` Rajendra Nayak
2016-08-09 3:51 ` Rajendra Nayak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462438309-11196-1-git-send-email-rnayak@codeaurora.org \
--to=rnayak@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=edubezval@gmail.com \
--cc=lina.iyer@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=nrajan@codeaurora.org \
--cc=punit.agrawal@arm.com \
--cc=rui.zhang@intel.com \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.