From: Eric Blake <eblake@redhat.com>
To: qemu-devel@nongnu.org
Cc: qemu-block@nongnu.org, kwolf@redhat.com, Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PATCH v7 17/19] qemu-img: Switch to byte-based block access
Date: Fri, 6 May 2016 10:26:43 -0600 [thread overview]
Message-ID: <1462552005-4887-18-git-send-email-eblake@redhat.com> (raw)
In-Reply-To: <1462552005-4887-1-git-send-email-eblake@redhat.com>
Sector-based blk_write() should die; switch to byte-based
blk_pwrite() instead. Likewise for blk_read().
Signed-off-by: Eric Blake <eblake@redhat.com>
---
qemu-img.c | 28 +++++++++++++++++++---------
1 file changed, 19 insertions(+), 9 deletions(-)
diff --git a/qemu-img.c b/qemu-img.c
index 76430a8..491a460 100644
--- a/qemu-img.c
+++ b/qemu-img.c
@@ -1088,7 +1088,8 @@ static int check_empty_sectors(BlockBackend *blk, int64_t sect_num,
uint8_t *buffer, bool quiet)
{
int pnum, ret = 0;
- ret = blk_read(blk, sect_num, buffer, sect_count);
+ ret = blk_pread(blk, sect_num << BDRV_SECTOR_BITS, buffer,
+ sect_count << BDRV_SECTOR_BITS);
if (ret < 0) {
error_report("Error while reading offset %" PRId64 " of %s: %s",
sectors_to_bytes(sect_num), filename, strerror(-ret));
@@ -1301,7 +1302,8 @@ static int img_compare(int argc, char **argv)
nb_sectors = MIN(pnum1, pnum2);
} else if (allocated1 == allocated2) {
if (allocated1) {
- ret = blk_read(blk1, sector_num, buf1, nb_sectors);
+ ret = blk_pread(blk1, sector_num << BDRV_SECTOR_BITS, buf1,
+ nb_sectors << BDRV_SECTOR_BITS);
if (ret < 0) {
error_report("Error while reading offset %" PRId64 " of %s:"
" %s", sectors_to_bytes(sector_num), filename1,
@@ -1309,7 +1311,8 @@ static int img_compare(int argc, char **argv)
ret = 4;
goto out;
}
- ret = blk_read(blk2, sector_num, buf2, nb_sectors);
+ ret = blk_pread(blk2, sector_num << BDRV_SECTOR_BITS, buf2,
+ nb_sectors << BDRV_SECTOR_BITS);
if (ret < 0) {
error_report("Error while reading offset %" PRId64
" of %s: %s", sectors_to_bytes(sector_num),
@@ -1522,7 +1525,9 @@ static int convert_read(ImgConvertState *s, int64_t sector_num, int nb_sectors,
bs_sectors = s->src_sectors[s->src_cur];
n = MIN(nb_sectors, bs_sectors - (sector_num - s->src_cur_offset));
- ret = blk_read(blk, sector_num - s->src_cur_offset, buf, n);
+ ret = blk_pread(blk,
+ (sector_num - s->src_cur_offset) << BDRV_SECTOR_BITS,
+ buf, n << BDRV_SECTOR_BITS);
if (ret < 0) {
return ret;
}
@@ -1577,7 +1582,8 @@ static int convert_write(ImgConvertState *s, int64_t sector_num, int nb_sectors,
if (!s->min_sparse ||
is_allocated_sectors_min(buf, n, &n, s->min_sparse))
{
- ret = blk_write(s->target, sector_num, buf, n);
+ ret = blk_pwrite(s->target, sector_num << BDRV_SECTOR_BITS,
+ buf, n << BDRV_SECTOR_BITS, 0);
if (ret < 0) {
return ret;
}
@@ -3024,7 +3030,8 @@ static int img_rebase(int argc, char **argv)
n = old_backing_num_sectors - sector;
}
- ret = blk_read(blk_old_backing, sector, buf_old, n);
+ ret = blk_pread(blk_old_backing, sector << BDRV_SECTOR_BITS,
+ buf_old, n << BDRV_SECTOR_BITS);
if (ret < 0) {
error_report("error while reading from old backing file");
goto out;
@@ -3038,7 +3045,8 @@ static int img_rebase(int argc, char **argv)
n = new_backing_num_sectors - sector;
}
- ret = blk_read(blk_new_backing, sector, buf_new, n);
+ ret = blk_pread(blk_new_backing, sector << BDRV_SECTOR_BITS,
+ buf_new, n << BDRV_SECTOR_BITS);
if (ret < 0) {
error_report("error while reading from new backing file");
goto out;
@@ -3054,8 +3062,10 @@ static int img_rebase(int argc, char **argv)
if (compare_sectors(buf_old + written * 512,
buf_new + written * 512, n - written, &pnum))
{
- ret = blk_write(blk, sector + written,
- buf_old + written * 512, pnum);
+ ret = blk_pwrite(blk,
+ (sector + written) << BDRV_SECTOR_BITS,
+ buf_old + written * 512,
+ pnum << BDRV_SECTOR_BITS, 0);
if (ret < 0) {
error_report("Error while writing to COW image: %s",
strerror(-ret));
--
2.5.5
next prev parent reply other threads:[~2016-05-06 16:27 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-06 16:26 [Qemu-devel] [PATCH v7 00/19] block: kill sector-based blk_write/read Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 01/19] block: Allow BDRV_REQ_FUA through blk_pwrite() Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 02/19] block: Switch blk_read_unthrottled() to byte interface Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 03/19] block: Switch blk_*write_zeroes() " Eric Blake
2016-05-23 15:42 ` Kevin Wolf
2016-05-23 16:03 ` Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 04/19] block: Introduce byte-based aio read/write Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 05/19] ide: Switch to byte-based aio block access Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 06/19] scsi-disk: " Eric Blake
2016-05-10 8:55 ` Kevin Wolf
2016-05-10 12:56 ` Eric Blake
2016-05-10 14:49 ` Kevin Wolf
2016-05-12 11:25 ` Paolo Bonzini
2016-05-12 11:26 ` Paolo Bonzini
2016-05-12 16:58 ` Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 07/19] virtio: " Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 08/19] xen_disk: " Eric Blake
2016-05-06 16:26 ` Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 09/19] fdc: Switch to byte-based " Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 10/19] nand: " Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 11/19] onenand: " Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 12/19] pflash: " Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 13/19] sd: " Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 14/19] m25p80: " Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 15/19] atapi: " Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 16/19] nbd: " Eric Blake
2016-05-06 16:26 ` Eric Blake [this message]
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 18/19] qemu-io: " Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 19/19] block: Kill unused sector-based blk_* functions Eric Blake
2016-05-10 8:56 ` [Qemu-devel] [PATCH v7 00/19] block: kill sector-based blk_write/read Kevin Wolf
2016-05-10 15:06 ` Kevin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462552005-4887-18-git-send-email-eblake@redhat.com \
--to=eblake@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.