From: Wei Ni <wni@nvidia.com>
To: edubezval@gmail.com, thierry.reding@gmail.com,
robh+dt@kernel.org, rui.zhang@intel.com
Cc: MLongnecker@nvidia.com, swarren@wwwdotorg.org,
mikko.perttunen@kapsi.fi, linux-tegra@vger.kernel.org,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Wei Ni <wni@nvidia.com>
Subject: [PATCH v4 07/11] arm64: tegra: set critical trips for Tegra132
Date: Mon, 9 May 2016 14:54:00 +0800 [thread overview]
Message-ID: <1462776844-2152-8-git-send-email-wni@nvidia.com> (raw)
In-Reply-To: <1462776844-2152-1-git-send-email-wni@nvidia.com>
Set general "critical" trip temperatures for cpu, gpu, mem and pllx
thermal zones on Tegra132, these trips can trigger shut down or reset.
Signed-off-by: Wei Ni <wni@nvidia.com>
---
arch/arm64/boot/dts/nvidia/tegra132.dtsi | 60 ++++++++++++++++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index e41d8e82d7ed..a3889e930010 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -746,6 +746,21 @@
thermal-sensors =
<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+ trips {
+ cpu_shutdown_trip {
+ temperature = <105000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * There are currently no cooling maps,
+ * because there are no cooling devices.
+ */
+ };
};
mem {
polling-delay-passive = <0>;
@@ -753,6 +768,21 @@
thermal-sensors =
<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+
+ trips {
+ mem_shutdown_trip {
+ temperature = <101000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * There are currently no cooling maps,
+ * because there are no cooling devices.
+ */
+ };
};
gpu {
polling-delay-passive = <1000>;
@@ -760,6 +790,21 @@
thermal-sensors =
<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+
+ trips {
+ gpu_shutdown_trip {
+ temperature = <101000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * There are currently no cooling maps,
+ * because there are no cooling devices.
+ */
+ };
};
pllx {
polling-delay-passive = <0>;
@@ -767,6 +812,21 @@
thermal-sensors =
<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+
+ trips {
+ pllx_shutdown_trip {
+ temperature = <105000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * There are currently no cooling maps,
+ * because there are no cooling devices.
+ */
+ };
};
};
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Wei Ni <wni@nvidia.com>
To: <edubezval@gmail.com>, <thierry.reding@gmail.com>,
<robh+dt@kernel.org>, <rui.zhang@intel.com>
Cc: <MLongnecker@nvidia.com>, <swarren@wwwdotorg.org>,
<mikko.perttunen@kapsi.fi>, <linux-tegra@vger.kernel.org>,
<linux-pm@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, Wei Ni <wni@nvidia.com>
Subject: [PATCH v4 07/11] arm64: tegra: set critical trips for Tegra132
Date: Mon, 9 May 2016 14:54:00 +0800 [thread overview]
Message-ID: <1462776844-2152-8-git-send-email-wni@nvidia.com> (raw)
In-Reply-To: <1462776844-2152-1-git-send-email-wni@nvidia.com>
Set general "critical" trip temperatures for cpu, gpu, mem and pllx
thermal zones on Tegra132, these trips can trigger shut down or reset.
Signed-off-by: Wei Ni <wni@nvidia.com>
---
arch/arm64/boot/dts/nvidia/tegra132.dtsi | 60 ++++++++++++++++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index e41d8e82d7ed..a3889e930010 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -746,6 +746,21 @@
thermal-sensors =
<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+ trips {
+ cpu_shutdown_trip {
+ temperature = <105000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * There are currently no cooling maps,
+ * because there are no cooling devices.
+ */
+ };
};
mem {
polling-delay-passive = <0>;
@@ -753,6 +768,21 @@
thermal-sensors =
<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+
+ trips {
+ mem_shutdown_trip {
+ temperature = <101000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * There are currently no cooling maps,
+ * because there are no cooling devices.
+ */
+ };
};
gpu {
polling-delay-passive = <1000>;
@@ -760,6 +790,21 @@
thermal-sensors =
<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+
+ trips {
+ gpu_shutdown_trip {
+ temperature = <101000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * There are currently no cooling maps,
+ * because there are no cooling devices.
+ */
+ };
};
pllx {
polling-delay-passive = <0>;
@@ -767,6 +812,21 @@
thermal-sensors =
<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+
+ trips {
+ pllx_shutdown_trip {
+ temperature = <105000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * There are currently no cooling maps,
+ * because there are no cooling devices.
+ */
+ };
};
};
--
1.9.1
next prev parent reply other threads:[~2016-05-09 6:52 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-09 6:53 [PATCH v4 00/11] Add HW throttle for Tegra soctherm Wei Ni
2016-05-09 6:53 ` Wei Ni
2016-05-09 6:53 ` [PATCH v4 01/11] of: Add bindings of hw " Wei Ni
2016-05-09 6:53 ` Wei Ni
2016-05-09 20:15 ` Rob Herring
2016-05-10 9:32 ` Wei Ni
2016-05-10 9:32 ` Wei Ni
2016-05-09 6:53 ` [PATCH v4 03/11] thermal: tegra: add hw-throttle for Tegra132 Wei Ni
2016-05-09 6:53 ` Wei Ni
2016-05-09 6:53 ` [PATCH v4 06/11] arm64: tegra: use tegra132-soctherm " Wei Ni
2016-05-09 6:53 ` Wei Ni
2016-05-09 6:54 ` Wei Ni [this message]
2016-05-09 6:54 ` [PATCH v4 07/11] arm64: tegra: set critical trips " Wei Ni
2016-05-09 6:54 ` [PATCH v4 08/11] arm64: tegra: set hot " Wei Ni
2016-05-09 6:54 ` Wei Ni
2016-05-09 6:54 ` [PATCH v4 09/11] arm64: tegra: add soctherm node for Tegra210 Wei Ni
2016-05-09 6:54 ` Wei Ni
2016-05-09 6:54 ` [PATCH v4 10/11] arm64: tegra: set critical trips " Wei Ni
2016-05-09 6:54 ` Wei Ni
[not found] ` <1462776844-2152-1-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-05-09 6:53 ` [PATCH v4 02/11] thermal: tegra: add hw-throttle function Wei Ni
2016-05-09 6:53 ` Wei Ni
2016-05-09 6:53 ` [PATCH v4 04/11] arm: tegra: set critical trips for Tegra124 Wei Ni
2016-05-09 6:53 ` Wei Ni
2016-05-09 6:53 ` [PATCH v4 05/11] arm: tegra: set hot " Wei Ni
2016-05-09 6:53 ` Wei Ni
2016-05-09 6:54 ` [PATCH v4 11/11] arm64: tegra: set hot trips for Tegra210 Wei Ni
2016-05-09 6:54 ` Wei Ni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462776844-2152-8-git-send-email-wni@nvidia.com \
--to=wni@nvidia.com \
--cc=MLongnecker@nvidia.com \
--cc=devicetree@vger.kernel.org \
--cc=edubezval@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mikko.perttunen@kapsi.fi \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=swarren@wwwdotorg.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.