All of lore.kernel.org
 help / color / mirror / Atom feed
From: serveralex@gmail.com (Alexander Müller)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 6/6] ARM: DTS: Amlogic: Enable ethernet on ODROID-C1
Date: Tue, 10 May 2016 22:08:40 +0200	[thread overview]
Message-ID: <1462910920-5462-7-git-send-email-serveralex@gmail.com> (raw)
In-Reply-To: <1462910920-5462-1-git-send-email-serveralex@gmail.com>

ODROID-C1 uses Amlogic meson8b integrated ethernet IC (compatible with
stmmac) and a Realtek RTL8211F gigabit ethernet PHY. The reset pin is
connected to GPIOH_4.

Signed-off-by: Alexander M?ller <serveralex@gmail.com>
---
 arch/arm/boot/dts/meson8b-odroidc1.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index e50f1a1..44410d9 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -76,3 +76,13 @@
 	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
 };
+
+&ethmac {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins>;
+	snps,reset-gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+};
+
-- 
2.5.0

WARNING: multiple messages have this Message-ID (diff)
From: serveralex@gmail.com (Alexander Müller)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/6] ARM: DTS: Amlogic: Enable ethernet on ODROID-C1
Date: Tue, 10 May 2016 22:08:40 +0200	[thread overview]
Message-ID: <1462910920-5462-7-git-send-email-serveralex@gmail.com> (raw)
In-Reply-To: <1462910920-5462-1-git-send-email-serveralex@gmail.com>

ODROID-C1 uses Amlogic meson8b integrated ethernet IC (compatible with
stmmac) and a Realtek RTL8211F gigabit ethernet PHY. The reset pin is
connected to GPIOH_4.

Signed-off-by: Alexander M?ller <serveralex@gmail.com>
---
 arch/arm/boot/dts/meson8b-odroidc1.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index e50f1a1..44410d9 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -76,3 +76,13 @@
 	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
 };
+
+&ethmac {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins>;
+	snps,reset-gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+};
+
-- 
2.5.0

  parent reply	other threads:[~2016-05-10 20:08 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-10 20:08 [PATCH 0/6] Enable ethernet support on Amlogic meson8b / Hardkernel ODROID-C1 Alexander Müller
2016-05-10 20:08 ` Alexander Müller
2016-05-10 20:08 ` [PATCH 1/6] pinctrl: meson: Fix eth_tx_en bit index Alexander Müller
2016-05-10 20:08   ` Alexander Müller
2016-05-11  9:48   ` Kevin Hilman
2016-05-11  9:48     ` Kevin Hilman
2016-05-12 13:41     ` Linus Walleij
2016-05-12 13:41       ` Linus Walleij
2016-05-10 20:08 ` [PATCH 2/6] ARM: DTS: Amlogic: Add ethernet pins Alexander Müller
2016-05-10 20:08   ` Alexander Müller
2016-05-10 20:08 ` [PATCH 3/6] ARM: clk: Amlogic: Add support for clock gates Alexander Müller
2016-05-10 20:08   ` Alexander Müller
2016-05-10 20:08 ` [PATCH 4/6] ARM: clk: Amlogic: Add clk81 " Alexander Müller
2016-05-10 20:08   ` Alexander Müller
2016-05-10 20:08 ` [PATCH 5/6] ARM: DTS: Amlogic: Enable ethernet on meson8b Alexander Müller
2016-05-10 20:08   ` Alexander Müller
2016-05-10 20:08 ` Alexander Müller [this message]
2016-05-10 20:08   ` [PATCH 6/6] ARM: DTS: Amlogic: Enable ethernet on ODROID-C1 Alexander Müller
2016-05-11  9:52 ` [PATCH 0/6] Enable ethernet support on Amlogic meson8b / Hardkernel ODROID-C1 Kevin Hilman
2016-05-11  9:52   ` Kevin Hilman
2016-05-11 18:27   ` Alexander Müller
2016-05-11 18:27     ` Alexander Müller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1462910920-5462-7-git-send-email-serveralex@gmail.com \
    --to=serveralex@gmail.com \
    --cc=linus-amlogic@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.