From: Borislav Petkov <bp@alien8.de>
To: Ingo Molnar <mingo@kernel.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH 6/7] EDAC, mce_amd: Detect SMCA using X86_FEATURE_SMCA
Date: Wed, 11 May 2016 14:58:28 +0200 [thread overview]
Message-ID: <1462971509-3856-7-git-send-email-bp@alien8.de> (raw)
In-Reply-To: <1462971509-3856-1-git-send-email-bp@alien8.de>
From: Yazen Ghannam <Yazen.Ghannam@amd.com>
Use X86_FEATURE_SMCA when detecting if SMCA is available instead of
directly using CPUID 0x80000007_EBX.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: <x86@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1462914639-29513-5-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
---
drivers/edac/mce_amd.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/edac/mce_amd.c b/drivers/edac/mce_amd.c
index 49768c08ac07..9b6800a79c7f 100644
--- a/drivers/edac/mce_amd.c
+++ b/drivers/edac/mce_amd.c
@@ -1052,7 +1052,6 @@ int amd_decode_mce(struct notifier_block *nb, unsigned long val, void *data)
struct mce *m = (struct mce *)data;
struct cpuinfo_x86 *c = &cpu_data(m->extcpu);
int ecc;
- u32 ebx = cpuid_ebx(0x80000007);
if (amd_filter_mce(m))
return NOTIFY_STOP;
@@ -1075,7 +1074,7 @@ int amd_decode_mce(struct notifier_block *nb, unsigned long val, void *data)
((m->status & MCI_STATUS_DEFERRED) ? "Deferred" : "-"),
((m->status & MCI_STATUS_POISON) ? "Poison" : "-"));
- if (!!(ebx & BIT(3))) {
+ if (boot_cpu_has(X86_FEATURE_SMCA)) {
u32 low, high;
u32 addr = MSR_AMD64_SMCA_MCx_CONFIG(m->bank);
@@ -1094,7 +1093,7 @@ int amd_decode_mce(struct notifier_block *nb, unsigned long val, void *data)
if (m->status & MCI_STATUS_ADDRV)
pr_emerg(HW_ERR "MC%d Error Address: 0x%016llx\n", m->bank, m->addr);
- if (!!(ebx & BIT(3))) {
+ if (boot_cpu_has(X86_FEATURE_SMCA)) {
decode_smca_errors(m);
goto err_code;
}
@@ -1149,7 +1148,6 @@ static struct notifier_block amd_mce_dec_nb = {
static int __init mce_amd_init(void)
{
struct cpuinfo_x86 *c = &boot_cpu_data;
- u32 ebx;
if (c->x86_vendor != X86_VENDOR_AMD)
return -ENODEV;
@@ -1205,9 +1203,8 @@ static int __init mce_amd_init(void)
break;
case 0x17:
- ebx = cpuid_ebx(0x80000007);
xec_mask = 0x3f;
- if (!(ebx & BIT(3))) {
+ if (!boot_cpu_has(X86_FEATURE_SMCA)) {
printk(KERN_WARNING "Decoding supported only on Scalable MCA processors.\n");
goto err_out;
}
--
2.7.3
next prev parent reply other threads:[~2016-05-11 12:59 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-11 12:58 [PATCH 0/7] x86/ras: RAS queue Borislav Petkov
2016-05-11 12:58 ` [PATCH 1/7] x86/mce/AMD: Log Deferred Errors using SMCA MCA_DE{STAT,ADDR} registers Borislav Petkov
2016-05-12 10:26 ` [tip:ras/core] " tip-bot for Yazen Ghannam
2016-05-11 12:58 ` [PATCH 2/7] x86/mce/AMD: Disable LogDeferredInMcaStat for SMCA systems Borislav Petkov
2016-05-12 10:27 ` [tip:ras/core] " tip-bot for Yazen Ghannam
2016-05-11 12:58 ` [PATCH 3/7] x86/mce/AMD: Save an indentation level in prepare_threshold_block() Borislav Petkov
2016-05-12 10:27 ` [tip:ras/core] " tip-bot for Borislav Petkov
2016-05-11 12:58 ` [PATCH 4/7] x86/cpu: Add detection of AMD RAS Capabilities Borislav Petkov
2016-05-12 10:27 ` [tip:ras/core] " tip-bot for Yazen Ghannam
2016-05-11 12:58 ` [PATCH 5/7] x86/mce: Update AMD mcheck init to use cpu_has() facilities Borislav Petkov
2016-05-12 10:28 ` [tip:ras/core] " tip-bot for Yazen Ghannam
2016-05-11 12:58 ` Borislav Petkov [this message]
2016-05-12 10:28 ` [tip:ras/core] EDAC, mce_amd: Detect SMCA using X86_FEATURE_SMCA tip-bot for Yazen Ghannam
2016-05-11 12:58 ` [PATCH 7/7] x86/RAS: Add SMCA support to AMD Error Injector Borislav Petkov
2016-05-12 10:29 ` [tip:ras/core] " tip-bot for Yazen Ghannam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462971509-3856-7-git-send-email-bp@alien8.de \
--to=bp@alien8.de \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.