[PATCH] USB: uas: Fix slave queue_depth not being set

[PATCH] USB: uas: Fix slave queue_depth not being set

[Hans de Goede]

Commit 198de51dbc34 ("USB: uas: Limit qdepth at the scsi-host level")
removed the scsi_change_queue_depth() call from uas_slave_configure()
assuming that the slave would inherit the host's queue_depth, which
that commit sets to the same value.

This is incorrect, without the scsi_change_queue_depth() call the slave's
queue_depth defaults to 1, introducing a performance regression.

This commit restores the call, fixing the performance regression.

Cc: stable@vger.kernel.org
Fixes: 198de51dbc34 ("USB: uas: Limit qdepth at the scsi-host level")
Reported-by: Tom Yan <tom.ty89@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/usb/storage/uas.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 16bc679..ecc7d4b 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -835,6 +835,7 @@ static int uas_slave_configure(struct scsi_device *sdev)
 	if (devinfo->flags & US_FL_BROKEN_FUA)
 		sdev->broken_fua = 1;
 
+	scsi_change_queue_depth(sdev, devinfo->qdepth - 2);
 	return 0;
 }
 
-- 
2.7.4

Re: [PATCH] USB: uas: Fix slave queue_depth not being set

[James Bottomley]

On Mon, 2016-05-23 at 13:49 +0200, Hans de Goede wrote:
> Commit 198de51dbc34 ("USB: uas: Limit qdepth at the scsi-host level")
> removed the scsi_change_queue_depth() call from uas_slave_configure()
> assuming that the slave would inherit the host's queue_depth, which
> that commit sets to the same value.
> 
> This is incorrect, without the scsi_change_queue_depth() call the 
> slave's queue_depth defaults to 1, introducing a performance
> regression.
> 
> This commit restores the call, fixing the performance regression.
> 
> Cc: stable@vger.kernel.org
> Fixes: 198de51dbc34 ("USB: uas: Limit qdepth at the scsi-host level")
> Reported-by: Tom Yan <tom.ty89@gmail.com>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
>  drivers/usb/storage/uas.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
> index 16bc679..ecc7d4b 100644
> --- a/drivers/usb/storage/uas.c
> +++ b/drivers/usb/storage/uas.c
> @@ -835,6 +835,7 @@ static int uas_slave_configure(struct scsi_device
> *sdev)
>  	if (devinfo->flags & US_FL_BROKEN_FUA)
>  		sdev->broken_fua = 1;
>  
> +	scsi_change_queue_depth(sdev, devinfo->qdepth - 2);

Are you sure about this?  For spinning rust, experiments imply that the
optimal queue depth per device is somewhere between 2 and 4.  Obviously
that's not true for SSDs, so it depends on your use case.  Plus, for
ATA NCQ devices (which I believe most UAS is bridged to) you have a
maximum NCQ depth of 31.

There's a good reason why you don't want a queue deeper than you can
handle: it tends to interfere with writeback because you build up a lot
of pending I/O in the queue which can't be issued (it's very similar to
why bufferbloat is a problem in networks).  In theory, as long as your
devices return the correct indicator (QUEUE_FULL status), we'll handle
most of this in the mid-layer by plugging the block queue, but given
what I've seen from UAS devices, that's less than probable.

James

Re: [PATCH] USB: uas: Fix slave queue_depth not being set

[Tom Yan]

On 24 May 2016 at 01:36, James Bottomley
<James.Bottomley@hansenpartnership.com> wrote:
>
> Are you sure about this?  For spinning rust, experiments imply that the
> optimal queue depth per device is somewhere between 2 and 4.  Obviously
> that's not true for SSDs, so it depends on your use case.

Are we supposed to care about the storage behind though? If it
matters, it would still be the UAS bridge's responsibility to adjust
the number of streams accordingly (even though I don't really think
any of them will be ideal enough to actually do that anyway).

> Plus, for
> ATA NCQ devices (which I believe most UAS is bridged to) you have a
> maximum NCQ depth of 31.

So far I haven't seen any UAS/SATA bridge reports a qdepth higher than
32 (and therefore, queue_depth is at most set to 30).

Re: [PATCH] USB: uas: Fix slave queue_depth not being set

[Hans de Goede]

Hi,

On 23-05-16 19:36, James Bottomley wrote:
> On Mon, 2016-05-23 at 13:49 +0200, Hans de Goede wrote:
>> Commit 198de51dbc34 ("USB: uas: Limit qdepth at the scsi-host level")
>> removed the scsi_change_queue_depth() call from uas_slave_configure()
>> assuming that the slave would inherit the host's queue_depth, which
>> that commit sets to the same value.
>>
>> This is incorrect, without the scsi_change_queue_depth() call the
>> slave's queue_depth defaults to 1, introducing a performance
>> regression.
>>
>> This commit restores the call, fixing the performance regression.
>>
>> Cc: stable@vger.kernel.org
>> Fixes: 198de51dbc34 ("USB: uas: Limit qdepth at the scsi-host level")
>> Reported-by: Tom Yan <tom.ty89@gmail.com>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>>  drivers/usb/storage/uas.c | 1 +
>>  1 file changed, 1 insertion(+)
>>
>> diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
>> index 16bc679..ecc7d4b 100644
>> --- a/drivers/usb/storage/uas.c
>> +++ b/drivers/usb/storage/uas.c
>> @@ -835,6 +835,7 @@ static int uas_slave_configure(struct scsi_device
>> *sdev)
>>  	if (devinfo->flags & US_FL_BROKEN_FUA)
>>  		sdev->broken_fua = 1;
>>
>> +	scsi_change_queue_depth(sdev, devinfo->qdepth - 2);
>
> Are you sure about this?  For spinning rust, experiments imply that the
> optimal queue depth per device is somewhere between 2 and 4.  Obviously
> that's not true for SSDs, so it depends on your use case.  Plus, for
> ATA NCQ devices (which I believe most UAS is bridged to) you have a
> maximum NCQ depth of 31.

So this value is the same as host.can_queue, and is what uas has always
used, basically this says it is ok to queue as much as the bridge can
handle. We've seen a few rare multi-lun devices, but typically almost
all uas devices have one lun, what I really want to do here is give a
maximum and let say the sd driver lower that if it is sub-optimal.

Also notice that uas is used a lot with ssd-s, that is mostly what
I want to optimize for, but it is definitely also used with
spinning rust.

And yes almost all uas devices are bridged sata devices (this may
change in the near future though, with ssd-s specifically designed
for usb-3 attachment, although sofar these all seem to use an
embbeded sata bridge), so from this pov an upper limit of 31 makes sense,
I guess, but I've not seen any bridges which actually do more then 32
streams anyways.

Still this is a bug-fix patch, essentially a partial revert, to address
performance regressions, so lets get this out as is and take our time to
come up with some tweaks (if necessary) for the say 4.8.

> There's a good reason why you don't want a queue deeper than you can
> handle: it tends to interfere with writeback because you build up a lot
> of pending I/O in the queue which can't be issued (it's very similar to
> why bufferbloat is a problem in networks).  In theory, as long as your
> devices return the correct indicator (QUEUE_FULL status), we'll handle
> most of this in the mid-layer by plugging the block queue, but given
> what I've seen from UAS devices, that's less than probable.

So any smart ideas how to be nicer to spinning rust, without negatively
impacting ssd-s? As said if I've to choice I think we should chose
optimizing ssd-s, as that is where uas is used a lot (although usb-attached
harddisks are switching over to it too).

Note I just checked the 1TB sata/ahci harddisk in my workstation and it is using
a queue_depth of 31 too, so this really does seem like a mid-layer problem
to me.

Regards,

Hans

Re: [PATCH] USB: uas: Fix slave queue_depth not being set

[James Bottomley]

On Tue, 2016-05-24 at 08:53 +0200, Hans de Goede wrote:
> Hi,
> 
> On 23-05-16 19:36, James Bottomley wrote:
> > On Mon, 2016-05-23 at 13:49 +0200, Hans de Goede wrote:
> > > Commit 198de51dbc34 ("USB: uas: Limit qdepth at the scsi-host
> > > level")
> > > removed the scsi_change_queue_depth() call from 
> > > uas_slave_configure() assuming that the slave would inherit the 
> > > host's queue_depth, which that commit sets to the same value.
> > > 
> > > This is incorrect, without the scsi_change_queue_depth() call the
> > > slave's queue_depth defaults to 1, introducing a performance
> > > regression.
> > > 
> > > This commit restores the call, fixing the performance regression.
> > > 
> > > Cc: stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> > > Fixes: 198de51dbc34 ("USB: uas: Limit qdepth at the scsi-host
> > > level")
> > > Reported-by: Tom Yan <tom.ty89-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > > Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> > > ---
> > >  drivers/usb/storage/uas.c | 1 +
> > >  1 file changed, 1 insertion(+)
> > > 
> > > diff --git a/drivers/usb/storage/uas.c
> > > b/drivers/usb/storage/uas.c
> > > index 16bc679..ecc7d4b 100644
> > > --- a/drivers/usb/storage/uas.c
> > > +++ b/drivers/usb/storage/uas.c
> > > @@ -835,6 +835,7 @@ static int uas_slave_configure(struct
> > > scsi_device
> > > *sdev)
> > >  	if (devinfo->flags & US_FL_BROKEN_FUA)
> > >  		sdev->broken_fua = 1;
> > > 
> > > +	scsi_change_queue_depth(sdev, devinfo->qdepth - 2);
> > 
> > Are you sure about this?  For spinning rust, experiments imply that 
> > the optimal queue depth per device is somewhere between 2 and 4. 
> >  Obviously that's not true for SSDs, so it depends on your use 
> > case.  Plus, for ATA NCQ devices (which I believe most UAS is 
> > bridged to) you have a maximum NCQ depth of 31.
> 
> So this value is the same as host.can_queue, and is what uas has 
> always used, basically this says it is ok to queue as much as the 
> bridge can handle. We've seen a few rare multi-lun devices, but 
> typically almost all uas devices have one lun, what I really want to 
> do here is give a maximum and let say the sd driver lower that if it
> is sub-optimal.

If that's what you actually want, you should be setting sdev
->max_queue_depth and .track_queue_depth = 1 in the template.

You might also need to add calls to scsi_track_queue_full() but only if
the devices aren't responding QUEUE_FULL correctly.

James

> Also notice that uas is used a lot with ssd-s, that is mostly what
> I want to optimize for, but it is definitely also used with spinning
> rust.
> 
> And yes almost all uas devices are bridged sata devices (this may
> change in the near future though, with ssd-s specifically designed
> for usb-3 attachment, although sofar these all seem to use an
> embbeded sata bridge), so from this pov an upper limit of 31 makes 
> sense, I guess, but I've not seen any bridges which actually do more 
> then 32 streams anyways.
> 
> Still this is a bug-fix patch, essentially a partial revert, to 
> address performance regressions, so lets get this out as is and take 
> our time to come up with some tweaks (if necessary) for the say 4.8.
> 
> > There's a good reason why you don't want a queue deeper than you 
> > can handle: it tends to interfere with writeback because you build 
> > up a lot of pending I/O in the queue which can't be issued (it's 
> > very similar to why bufferbloat is a problem in networks).  In 
> > theory, as long as your devices return the correct indicator 
> > (QUEUE_FULL status), we'll handle most of this in the mid-layer by 
> > plugging the block queue, but given what I've seen from UAS
> > devices, that's less than probable.
> 
> So any smart ideas how to be nicer to spinning rust, without 
> negatively impacting ssd-s? As said if I've to choice I think we 
> should chose optimizing ssd-s, as that is where uas is used a lot 
> (although usb  attached harddisks are switching over to it too).
> 
> Note I just checked the 1TB sata/ahci harddisk in my workstation and 
> it is using a queue_depth of 31 too, so this really does seem like a 
> mid-layer problem to me.
> 
> Regards,
> 
> Hans
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi"
> in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] USB: uas: Fix slave queue_depth not being set

[James Bottomley]

On Tue, 2016-05-24 at 08:53 +0200, Hans de Goede wrote:
> Hi,
> 
> On 23-05-16 19:36, James Bottomley wrote:
> > On Mon, 2016-05-23 at 13:49 +0200, Hans de Goede wrote:
> > > Commit 198de51dbc34 ("USB: uas: Limit qdepth at the scsi-host
> > > level")
> > > removed the scsi_change_queue_depth() call from 
> > > uas_slave_configure() assuming that the slave would inherit the 
> > > host's queue_depth, which that commit sets to the same value.
> > > 
> > > This is incorrect, without the scsi_change_queue_depth() call the
> > > slave's queue_depth defaults to 1, introducing a performance
> > > regression.
> > > 
> > > This commit restores the call, fixing the performance regression.
> > > 
> > > Cc: stable@vger.kernel.org
> > > Fixes: 198de51dbc34 ("USB: uas: Limit qdepth at the scsi-host
> > > level")
> > > Reported-by: Tom Yan <tom.ty89@gmail.com>
> > > Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> > > ---
> > >  drivers/usb/storage/uas.c | 1 +
> > >  1 file changed, 1 insertion(+)
> > > 
> > > diff --git a/drivers/usb/storage/uas.c
> > > b/drivers/usb/storage/uas.c
> > > index 16bc679..ecc7d4b 100644
> > > --- a/drivers/usb/storage/uas.c
> > > +++ b/drivers/usb/storage/uas.c
> > > @@ -835,6 +835,7 @@ static int uas_slave_configure(struct
> > > scsi_device
> > > *sdev)
> > >  	if (devinfo->flags & US_FL_BROKEN_FUA)
> > >  		sdev->broken_fua = 1;
> > > 
> > > +	scsi_change_queue_depth(sdev, devinfo->qdepth - 2);
> > 
> > Are you sure about this?  For spinning rust, experiments imply that 
> > the optimal queue depth per device is somewhere between 2 and 4. 
> >  Obviously that's not true for SSDs, so it depends on your use 
> > case.  Plus, for ATA NCQ devices (which I believe most UAS is 
> > bridged to) you have a maximum NCQ depth of 31.
> 
> So this value is the same as host.can_queue, and is what uas has 
> always used, basically this says it is ok to queue as much as the 
> bridge can handle. We've seen a few rare multi-lun devices, but 
> typically almost all uas devices have one lun, what I really want to 
> do here is give a maximum and let say the sd driver lower that if it
> is sub-optimal.

If that's what you actually want, you should be setting sdev
->max_queue_depth and .track_queue_depth = 1 in the template.

You might also need to add calls to scsi_track_queue_full() but only if
the devices aren't responding QUEUE_FULL correctly.

James

> Also notice that uas is used a lot with ssd-s, that is mostly what
> I want to optimize for, but it is definitely also used with spinning
> rust.
> 
> And yes almost all uas devices are bridged sata devices (this may
> change in the near future though, with ssd-s specifically designed
> for usb-3 attachment, although sofar these all seem to use an
> embbeded sata bridge), so from this pov an upper limit of 31 makes 
> sense, I guess, but I've not seen any bridges which actually do more 
> then 32 streams anyways.
> 
> Still this is a bug-fix patch, essentially a partial revert, to 
> address performance regressions, so lets get this out as is and take 
> our time to come up with some tweaks (if necessary) for the say 4.8.
> 
> > There's a good reason why you don't want a queue deeper than you 
> > can handle: it tends to interfere with writeback because you build 
> > up a lot of pending I/O in the queue which can't be issued (it's 
> > very similar to why bufferbloat is a problem in networks).  In 
> > theory, as long as your devices return the correct indicator 
> > (QUEUE_FULL status), we'll handle most of this in the mid-layer by 
> > plugging the block queue, but given what I've seen from UAS
> > devices, that's less than probable.
> 
> So any smart ideas how to be nicer to spinning rust, without 
> negatively impacting ssd-s? As said if I've to choice I think we 
> should chose optimizing ssd-s, as that is where uas is used a lot 
> (although usb  attached harddisks are switching over to it too).
> 
> Note I just checked the 1TB sata/ahci harddisk in my workstation and 
> it is using a queue_depth of 31 too, so this really does seem like a 
> mid-layer problem to me.
> 
> Regards,
> 
> Hans
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi"
> in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

Re: [PATCH] USB: uas: Fix slave queue_depth not being set

[Hans de Goede]

Hi,

On 24-05-16 14:44, James Bottomley wrote:
> On Tue, 2016-05-24 at 08:53 +0200, Hans de Goede wrote:
>> Hi,
>>
>> On 23-05-16 19:36, James Bottomley wrote:
>>> On Mon, 2016-05-23 at 13:49 +0200, Hans de Goede wrote:
>>>> Commit 198de51dbc34 ("USB: uas: Limit qdepth at the scsi-host
>>>> level")
>>>> removed the scsi_change_queue_depth() call from
>>>> uas_slave_configure() assuming that the slave would inherit the
>>>> host's queue_depth, which that commit sets to the same value.
>>>>
>>>> This is incorrect, without the scsi_change_queue_depth() call the
>>>> slave's queue_depth defaults to 1, introducing a performance
>>>> regression.
>>>>
>>>> This commit restores the call, fixing the performance regression.
>>>>
>>>> Cc: stable@vger.kernel.org
>>>> Fixes: 198de51dbc34 ("USB: uas: Limit qdepth at the scsi-host
>>>> level")
>>>> Reported-by: Tom Yan <tom.ty89@gmail.com>
>>>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>>>> ---
>>>>  drivers/usb/storage/uas.c | 1 +
>>>>  1 file changed, 1 insertion(+)
>>>>
>>>> diff --git a/drivers/usb/storage/uas.c
>>>> b/drivers/usb/storage/uas.c
>>>> index 16bc679..ecc7d4b 100644
>>>> --- a/drivers/usb/storage/uas.c
>>>> +++ b/drivers/usb/storage/uas.c
>>>> @@ -835,6 +835,7 @@ static int uas_slave_configure(struct
>>>> scsi_device
>>>> *sdev)
>>>>  	if (devinfo->flags & US_FL_BROKEN_FUA)
>>>>  		sdev->broken_fua = 1;
>>>>
>>>> +	scsi_change_queue_depth(sdev, devinfo->qdepth - 2);
>>>
>>> Are you sure about this?  For spinning rust, experiments imply that
>>> the optimal queue depth per device is somewhere between 2 and 4.
>>>  Obviously that's not true for SSDs, so it depends on your use
>>> case.  Plus, for ATA NCQ devices (which I believe most UAS is
>>> bridged to) you have a maximum NCQ depth of 31.
>>
>> So this value is the same as host.can_queue, and is what uas has
>> always used, basically this says it is ok to queue as much as the
>> bridge can handle. We've seen a few rare multi-lun devices, but
>> typically almost all uas devices have one lun, what I really want to
>> do here is give a maximum and let say the sd driver lower that if it
>> is sub-optimal.
>
> If that's what you actually want, you should be setting sdev
> ->max_queue_depth and .track_queue_depth = 1 in the template.

Hmm, I've been looking into this, but that does not seem right.

max_queue_depth is never set by drivers, it is set to sdev->queue_depth
in scsi_scan.c: scsi_add_lun() after calling the host drivers'
slave_configure callback. So it seems that the right way to set
max_queue_depth is to actually set queue_depth, or iow restore the
call to scsi_change_queue_depth() as the patch we're discussing does.

As for track_queue_depth = 1 that seems to be only set by some drivers
under drivers/scsi and is never set by any drivers under drivers/ata,
and we're almost exclusively dealing with sata disks in uas. It seems
that track_queue_depth = 1 is mostly used for iscsi and fibre channel
iow enterprise class storage stuff, so looking at existing drivers
usage of this flag using it does not seem a good idea.

Anyways this patch is a (partial) revert of a previous bug-fix patch
(which has also gone to stable) so for now I would really like to
move forward with this patch and get it upstream and in stable
to fix the performance regressions people are seeing caused by
me wrongly dropping the scsi_change_queue_depth() call.

Then if we want to tweak the queuing further we can do that
on top of this fix, and put that in next and let it get some testing
first.

So are you ok with moving this patch forward ?

Regards,

Hans



> You might also need to add calls to scsi_track_queue_full() but only if
> the devices aren't responding QUEUE_FULL correctly.
>
> James
>
>> Also notice that uas is used a lot with ssd-s, that is mostly what
>> I want to optimize for, but it is definitely also used with spinning
>> rust.
>>
>> And yes almost all uas devices are bridged sata devices (this may
>> change in the near future though, with ssd-s specifically designed
>> for usb-3 attachment, although sofar these all seem to use an
>> embbeded sata bridge), so from this pov an upper limit of 31 makes
>> sense, I guess, but I've not seen any bridges which actually do more
>> then 32 streams anyways.
>>
>> Still this is a bug-fix patch, essentially a partial revert, to
>> address performance regressions, so lets get this out as is and take
>> our time to come up with some tweaks (if necessary) for the say 4.8.
>>
>>> There's a good reason why you don't want a queue deeper than you
>>> can handle: it tends to interfere with writeback because you build
>>> up a lot of pending I/O in the queue which can't be issued (it's
>>> very similar to why bufferbloat is a problem in networks).  In
>>> theory, as long as your devices return the correct indicator
>>> (QUEUE_FULL status), we'll handle most of this in the mid-layer by
>>> plugging the block queue, but given what I've seen from UAS
>>> devices, that's less than probable.
>>
>> So any smart ideas how to be nicer to spinning rust, without
>> negatively impacting ssd-s? As said if I've to choice I think we
>> should chose optimizing ssd-s, as that is where uas is used a lot
>> (although usb  attached harddisks are switching over to it too).
>>
>> Note I just checked the 1TB sata/ahci harddisk in my workstation and
>> it is using a queue_depth of 31 too, so this really does seem like a
>> mid-layer problem to me.
>>
>> Regards,
>>
>> Hans
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-scsi"
>> in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
>

Re: [PATCH] USB: uas: Fix slave queue_depth not being set

[Tom Yan]

What if a UAS bridge requires specific SCSI command (e.g. UNMAP) to be
issued unqueued/untagged? Would track_queue_depth help?

On 25 May 2016 at 19:04, Hans de Goede <hdegoede@redhat.com> wrote:
> Hi,
>
>
> On 24-05-16 14:44, James Bottomley wrote:
>>
>> On Tue, 2016-05-24 at 08:53 +0200, Hans de Goede wrote:
>>>
>>> Hi,
>>>
>>> On 23-05-16 19:36, James Bottomley wrote:
>>>>
>>>> On Mon, 2016-05-23 at 13:49 +0200, Hans de Goede wrote:
>>>>>
>>>>> Commit 198de51dbc34 ("USB: uas: Limit qdepth at the scsi-host
>>>>> level")
>>>>> removed the scsi_change_queue_depth() call from
>>>>> uas_slave_configure() assuming that the slave would inherit the
>>>>> host's queue_depth, which that commit sets to the same value.
>>>>>
>>>>> This is incorrect, without the scsi_change_queue_depth() call the
>>>>> slave's queue_depth defaults to 1, introducing a performance
>>>>> regression.
>>>>>
>>>>> This commit restores the call, fixing the performance regression.
>>>>>
>>>>> Cc: stable@vger.kernel.org
>>>>> Fixes: 198de51dbc34 ("USB: uas: Limit qdepth at the scsi-host
>>>>> level")
>>>>> Reported-by: Tom Yan <tom.ty89@gmail.com>
>>>>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>>>>> ---
>>>>>  drivers/usb/storage/uas.c | 1 +
>>>>>  1 file changed, 1 insertion(+)
>>>>>
>>>>> diff --git a/drivers/usb/storage/uas.c
>>>>> b/drivers/usb/storage/uas.c
>>>>> index 16bc679..ecc7d4b 100644
>>>>> --- a/drivers/usb/storage/uas.c
>>>>> +++ b/drivers/usb/storage/uas.c
>>>>> @@ -835,6 +835,7 @@ static int uas_slave_configure(struct
>>>>> scsi_device
>>>>> *sdev)
>>>>>         if (devinfo->flags & US_FL_BROKEN_FUA)
>>>>>                 sdev->broken_fua = 1;
>>>>>
>>>>> +       scsi_change_queue_depth(sdev, devinfo->qdepth - 2);
>>>>
>>>>
>>>> Are you sure about this?  For spinning rust, experiments imply that
>>>> the optimal queue depth per device is somewhere between 2 and 4.
>>>>  Obviously that's not true for SSDs, so it depends on your use
>>>> case.  Plus, for ATA NCQ devices (which I believe most UAS is
>>>> bridged to) you have a maximum NCQ depth of 31.
>>>
>>>
>>> So this value is the same as host.can_queue, and is what uas has
>>> always used, basically this says it is ok to queue as much as the
>>> bridge can handle. We've seen a few rare multi-lun devices, but
>>> typically almost all uas devices have one lun, what I really want to
>>> do here is give a maximum and let say the sd driver lower that if it
>>> is sub-optimal.
>>
>>
>> If that's what you actually want, you should be setting sdev
>> ->max_queue_depth and .track_queue_depth = 1 in the template.
>
>
> Hmm, I've been looking into this, but that does not seem right.
>
> max_queue_depth is never set by drivers, it is set to sdev->queue_depth
> in scsi_scan.c: scsi_add_lun() after calling the host drivers'
> slave_configure callback. So it seems that the right way to set
> max_queue_depth is to actually set queue_depth, or iow restore the
> call to scsi_change_queue_depth() as the patch we're discussing does.
>
> As for track_queue_depth = 1 that seems to be only set by some drivers
> under drivers/scsi and is never set by any drivers under drivers/ata,
> and we're almost exclusively dealing with sata disks in uas. It seems
> that track_queue_depth = 1 is mostly used for iscsi and fibre channel
> iow enterprise class storage stuff, so looking at existing drivers
> usage of this flag using it does not seem a good idea.
>
> Anyways this patch is a (partial) revert of a previous bug-fix patch
> (which has also gone to stable) so for now I would really like to
> move forward with this patch and get it upstream and in stable
> to fix the performance regressions people are seeing caused by
> me wrongly dropping the scsi_change_queue_depth() call.
>
> Then if we want to tweak the queuing further we can do that
> on top of this fix, and put that in next and let it get some testing
> first.
>
> So are you ok with moving this patch forward ?
>
> Regards,
>
> Hans
>
>
>
>
>> You might also need to add calls to scsi_track_queue_full() but only if
>> the devices aren't responding QUEUE_FULL correctly.
>>
>> James
>>
>>> Also notice that uas is used a lot with ssd-s, that is mostly what
>>> I want to optimize for, but it is definitely also used with spinning
>>> rust.
>>>
>>> And yes almost all uas devices are bridged sata devices (this may
>>> change in the near future though, with ssd-s specifically designed
>>> for usb-3 attachment, although sofar these all seem to use an
>>> embbeded sata bridge), so from this pov an upper limit of 31 makes
>>> sense, I guess, but I've not seen any bridges which actually do more
>>> then 32 streams anyways.
>>>
>>> Still this is a bug-fix patch, essentially a partial revert, to
>>> address performance regressions, so lets get this out as is and take
>>> our time to come up with some tweaks (if necessary) for the say 4.8.
>>>
>>>> There's a good reason why you don't want a queue deeper than you
>>>> can handle: it tends to interfere with writeback because you build
>>>> up a lot of pending I/O in the queue which can't be issued (it's
>>>> very similar to why bufferbloat is a problem in networks).  In
>>>> theory, as long as your devices return the correct indicator
>>>> (QUEUE_FULL status), we'll handle most of this in the mid-layer by
>>>> plugging the block queue, but given what I've seen from UAS
>>>> devices, that's less than probable.
>>>
>>>
>>> So any smart ideas how to be nicer to spinning rust, without
>>> negatively impacting ssd-s? As said if I've to choice I think we
>>> should chose optimizing ssd-s, as that is where uas is used a lot
>>> (although usb  attached harddisks are switching over to it too).
>>>
>>> Note I just checked the 1TB sata/ahci harddisk in my workstation and
>>> it is using a queue_depth of 31 too, so this really does seem like a
>>> mid-layer problem to me.
>>>
>>> Regards,
>>>
>>> Hans
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-scsi"
>>> in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>>
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html