From: Atri Bhattacharya <badshah400@aim.com>
To: linux-iio <linux-iio@vger.kernel.org>,
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Subject: Re: [RFC 0/4] Intel Integrated Sensor Hub Support (ISH)
Date: Thu, 02 Jun 2016 21:42:15 +0200 [thread overview]
Message-ID: <1464896535.3470.4.camel@aim.com> (raw)
In-Reply-To: <1464886187.3970.55.camel@linux.intel.com>
[-- Attachment #1: Type: text/plain, Size: 3304 bytes --]
Hi Srinivas,
On Thu, 2016-06-02 at 09:49 -0700, Srinivas Pandruvada wrote:
> Hi,
> On Thu, 2016-06-02 at 09:48 +0200, Atri Bhattacharya wrote:
> > On Thu, 2016-06-02 at 03:27 +0000, Srinivas Pandruvada wrote:
> > >
> > > Atri Bhattacharya <badshah400@...> writes:
> > >
> > > >
> > > >
> [...]
> > > > +
> > > #include <linux/device.h>
> > > #include <linux/hid.h>
> > > #include <linux/module.h>
> > > @@ -798,6 +799,9 @@ static const struct hid_device_id
> > > sensor_hub_devices[] =
> > > {
> > > { HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB,
> > > USB_VENDOR_ID_ITE,
> > > USB_DEVICE_ID_ITE_LENOVO_YOGA900),
> > > .driver_data =
> > > HID_SENSOR_HUB_ENUM_QUIRK},
> > > + { HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB,
> > > USB_VENDOR_ID_INTEL_0,
> > > + 0x22D8),
> > > + .driver_data =
> > > HID_SENSOR_HUB_ENUM_QUIRK},
> > > { HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB,
> > > HID_ANY_ID,
> > > HID_ANY_ID) },
> > > { }
> > >
> > >
> > Thanks for your response, but this patch didn't help with the slow
> > suspend/wakeup problem or with making the device actually respond
> > to
> > rotation or brightness changes. At this stage the sensor-hub seems
> > to
> > be recognised just fine, but not to be working. Same messages as
> > above
> > continue to show up in the journal.
> >
> Looks like the system resume is getting timed out. I am looking at
> possible issue on Yoga 260.
> Meanwhile can you try:
> - Raw reads (cat /sys/bus/iio/devices/iio:device (your device
> index)/in_accel_?_raw
There are two sets of results:
1. After a reboot but before suspend/wakeup
~> for i in {1..5}; do printf "%d " `cat
/sys/bus/iio/devices/iio\:device3/in_accel_?_raw`; echo; sleep 1; done
25684 -1033593 -456933
-347362 -1014062 -367090
-919628 -281640 -167871
-898143 278906 15722
-648143 683203 123144
2. After susepend/wakeup, output from cat seems to take a long while
(10+ sec for each cat call)
0 0 0
0 0 0 and so on...
> - The attached is a program. Don't start iio_sensor_proxy service.
> Disable so that it doesn't start on boot and run
> sensor_monitor -n accel_3d
1. Before suspend/wakeup: see attachment sensor-monitor_output1.txt
2. Post suspend/wakeup:
/sys/bus/iio/devices/iio:device0 0.000000
>>
>>
>>
>>
>>
>>
>>
>>
>>
l,s,32,32,0
<<
>>
l,s,32,32,0
<<
>>
l,s,32,32,0
<<
/sys/bus/iio/devices/iio:device1 0.000000
>>
>>
>>
>>
>>
>>
>>
>>
>>
l,s,32,32,0
<<
>>
l,s,32,32,0
<<
>>
l,s,32,32,0
<<
/sys/bus/iio/devices/iio:device2 0.001000
>>
>>
>>
>>
>>
l,s,32,32,0
<<
/sys/bus/iio/devices/iio:device3 0.000009
>>
>>
>>
>>
l,s,32,32,0
<<
>>
l,s,32,32,0
<<
>>
l,s,32,32,0
<<
>>
>>
>>
>>
>>
/sys/bus/iio/devices/iio:device4 0.000001
>>
>>
>>
>>
>>
>>
>>
l,s,32,32,0
<<
>>
>>
l,s,32,32,0
<<
>>
l,s,32,32,0
<<
>>
l,s,32,32,0
<<
>>
>>
>>
[It seems to hang at this stage, so I hit Ctrl-C finally after some
waiting]
Hope that helps.
Best wishes.
--
Atri Bhattacharya
Thu 2 Jun 21:39:25 CEST 2016
Sent from openSUSE Tumbleweed (20160531) (x86_64) on my laptop.
[-- Attachment #2: sensor-monitor_ouput1.txt --]
[-- Type: text/plain, Size: 2777 bytes --]
/sys/bus/iio/devices/iio:device0 0.000000
>>
>>
>>
>>
>>
>>
>>
>>
>>
l,s,32,32,0
<<
>>
l,s,32,32,0
<<
>>
l,s,32,32,0
<<
/sys/bus/iio/devices/iio:device1 0.000000
>>
>>
>>
>>
>>
>>
>>
>>
>>
l,s,32,32,0
<<
>>
l,s,32,32,0
<<
>>
l,s,32,32,0
<<
/sys/bus/iio/devices/iio:device2 0.001000
>>
>>
>>
>>
>>
l,s,32,32,0
<<
/sys/bus/iio/devices/iio:device3 0.000009
>>
>>
>>
>>
l,s,32,32,0
<<
>>
l,s,32,32,0
<<
>>
l,s,32,32,0
<<
>>
>>
>>
>>
>>
/sys/bus/iio/devices/iio:device4 0.000001
>>
>>
>>
>>
>>
>>
>>
l,s,32,32,0
<<
>>
>>
l,s,32,32,0
<<
>>
l,s,32,32,0
<<
>>
l,s,32,32,0
<<
>>
>>
>>
Read bufsize 12
fread ret = 1
Event ( 0.25, -6.95, -5.85)
Read bufsize 12
fread ret = 1
Event ( -0.09, -6.67, -5.36)
Read bufsize 12
fread ret = 1
Event ( 0.21, -6.82, -5.87)
Read bufsize 12
fread ret = 1
Event ( 0.14, -6.74, -5.71)
Read bufsize 12
fread ret = 1
Event ( 0.16, -6.81, -5.84)
Read bufsize 12
fread ret = 1
Event ( 0.13, -6.77, -5.76)
Read bufsize 12
fread ret = 1
Event ( 0.16, -6.79, -5.80)
Read bufsize 12
fread ret = 1
Event ( 0.16, -6.81, -5.80)
Read bufsize 12
fread ret = 1
Event ( 0.18, -6.75, -5.80)
Read bufsize 12
fread ret = 1
Event ( 0.14, -6.77, -5.78)
Read bufsize 12
fread ret = 1
Event ( 0.18, -6.75, -5.84)
Read bufsize 12
fread ret = 1
Event ( 0.18, -6.79, -5.80)
Read bufsize 12
fread ret = 1
Event ( 0.16, -6.82, -5.75)
Read bufsize 12
fread ret = 1
Event ( 0.16, -6.81, -5.73)
Read bufsize 12
fread ret = 1
Event ( 0.16, -6.77, -5.75)
Read bufsize 12
fread ret = 1
Event ( 0.18, -6.79, -5.78)
Read bufsize 12
fread ret = 1
Event ( 0.18, -6.79, -5.76)
Read bufsize 12
fread ret = 1
Event ( 0.23, -6.81, -5.91)
Read bufsize 12
fread ret = 1
Event ( 0.16, -6.82, -5.69)
Read bufsize 12
fread ret = 1
Event ( 0.13, -6.77, -5.73)
Read bufsize 12
fread ret = 1
Event ( 0.20, -6.79, -5.75)
Read bufsize 12
fread ret = 1
Event ( 0.20, -6.79, -5.82)
Read bufsize 12
fread ret = 1
Event ( 0.20, -6.77, -6.17)
Read bufsize 12
fread ret = 1
Event ( 0.16, -6.79, -5.82)
Read bufsize 12
fread ret = 1
Event ( 0.14, -6.82, -5.73)
Read bufsize 12
fread ret = 1
Event ( 0.09, -6.77, -5.76)
Read bufsize 12
fread ret = 1
Event ( 0.13, -6.79, -5.73)
Read bufsize 12
fread ret = 1
Event ( 0.11, -6.77, -5.75)
Read bufsize 12
fread ret = 1
Event ( 0.14, -6.81, -5.75)
Read bufsize 12
fread ret = 1
Event ( 0.14, -6.81, -5.76)
Read bufsize 12
fread ret = 1
Event ( 0.21, -6.82, -5.87)
next prev parent reply other threads:[~2016-06-02 19:42 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-31 4:27 [RFC 0/4] Intel Integrated Sensor Hub Support (ISH) Srinivas Pandruvada
[not found] ` <1464668878-17113-1-git-send-email-srinivas.pandruvada-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2016-05-31 4:27 ` [RFC 1/4] Documentation: hid: Intel ISH HID document Srinivas Pandruvada
2016-05-31 4:27 ` Srinivas Pandruvada
2016-05-31 4:27 ` [RFC 2/4] hid: intel_ish-hid: ISH Transport layer Srinivas Pandruvada
2016-05-31 4:27 ` [RFC 3/4] hid: intel-ish-hid: ipc layer Srinivas Pandruvada
2016-05-31 4:27 ` [RFC 4/4] hid: intel-ish-hid: ISH HID client driver Srinivas Pandruvada
2016-06-01 13:36 ` [RFC 0/4] Intel Integrated Sensor Hub Support (ISH) Atri Bhattacharya
2016-06-01 13:36 ` Atri Bhattacharya
2016-06-01 13:36 ` Atri Bhattacharya
2016-06-02 3:27 ` Srinivas Pandruvada
2016-06-02 7:48 ` Atri Bhattacharya
2016-06-02 16:49 ` Srinivas Pandruvada
2016-06-02 19:42 ` Atri Bhattacharya [this message]
2016-06-02 20:00 ` Srinivas Pandruvada
2016-06-02 21:44 ` Pandruvada, Srinivas
2016-06-02 22:29 ` Atri Bhattacharya
2016-06-02 22:48 ` Srinivas Pandruvada
2016-06-02 22:57 ` Atri Bhattacharya
2016-06-02 23:13 ` Atri Bhattacharya
2016-06-03 2:50 ` Atri Bhattacharya
2016-06-03 4:01 ` Srinivas Pandruvada
2016-06-03 3:08 ` Atri Bhattacharya
2016-06-03 4:02 ` Srinivas Pandruvada
2016-06-06 6:47 ` Srinivas Pandruvada
2016-06-09 21:45 ` Grant Likely
2016-06-09 21:54 ` Srinivas Pandruvada
2016-06-09 21:54 ` Srinivas Pandruvada
[not found] ` <1465509287.24319.3.camel-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2016-06-10 9:44 ` Grant Likely
2016-06-10 9:44 ` Grant Likely
2016-06-10 13:55 ` Srinivas Pandruvada
2016-06-10 14:26 ` Bastien Nocera
[not found] ` <1465568791.7409.38.camel-0MeiytkfxGOsTnJN9+BGXg@public.gmane.org>
2016-06-10 14:45 ` Srinivas Pandruvada
2016-06-10 14:45 ` Srinivas Pandruvada
2016-06-10 15:04 ` Bastien Nocera
2016-06-10 15:04 ` Bastien Nocera
[not found] ` <1465571076.7409.39.camel-0MeiytkfxGOsTnJN9+BGXg@public.gmane.org>
2016-06-10 15:23 ` Srinivas Pandruvada
2016-06-10 15:23 ` Srinivas Pandruvada
[not found] ` <1465572227.24319.7.camel-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2016-06-10 15:27 ` Bastien Nocera
2016-06-10 15:27 ` Bastien Nocera
[not found] ` <1465572452.7409.41.camel-0MeiytkfxGOsTnJN9+BGXg@public.gmane.org>
2016-06-14 13:44 ` Grant Likely
2016-06-14 13:44 ` Grant Likely
2016-06-14 15:12 ` Bastien Nocera
2016-06-14 16:08 ` Grant Likely
2016-06-14 17:01 ` Bastien Nocera
2016-06-14 21:33 ` Grant Likely
[not found] ` <CACxGe6vq-FDpjG8WtrraveQo+ZT3MHMDFzrA5-qqNLEwcbmNhw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-06-10 14:02 ` Grant Likely
2016-06-10 14:02 ` Grant Likely
-- strict thread matches above, loose matches on Subject: below --
2016-06-02 14:35 me
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1464896535.3470.4.camel@aim.com \
--to=badshah400@aim.com \
--cc=linux-iio@vger.kernel.org \
--cc=srinivas.pandruvada@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.