All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas Zimmermann <tzimmermann@suse.de>
To: Rich Felker <dalias@libc.org>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-fbdev@vger.kernel.org, Thomas Gleixner <tglx@linutronix.de>,
	dri-devel@lists.freedesktop.org
Subject: Re: [PATCH] matroxfb: add Matrox MGA-G200eW board support
Date: Mon, 27 Jan 2020 07:36:07 +0000	[thread overview]
Message-ID: <1466259e-efe7-df52-c05b-80042628d577@suse.de> (raw)
In-Reply-To: <20200125195506.GA16638@brightrain.aerifal.cx>


[-- Attachment #1.1: Type: text/plain, Size: 2288 bytes --]

Hi

Am 25.01.20 um 20:55 schrieb Rich Felker:
> Signed-off-by: Rich Felker <dalias@libc.org>
> --
> I've had this lying around a while and figure I should send it
> upsteam; it's needed to support the onboard video on my Spectre-free
> Atom S1260 server board.

This HW is supported by mgag200, which is maintained. Can't you use that?

Best regards
Thomas

> 
> ---
>  drivers/video/fbdev/matrox/matroxfb_base.c | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/drivers/video/fbdev/matrox/matroxfb_base.c b/drivers/video/fbdev/matrox/matroxfb_base.c
> index 1a555f70923a..ff344313860c 100644
> --- a/drivers/video/fbdev/matrox/matroxfb_base.c
> +++ b/drivers/video/fbdev/matrox/matroxfb_base.c
> @@ -1376,6 +1376,12 @@ static struct video_board vbG200 = {
>  	.accelID = FB_ACCEL_MATROX_MGAG200,
>  	.lowlevel = &matrox_G100
>  };
> +static struct video_board vbG200eW = {
> +	.maxvram = 0x800000,
> +	.maxdisplayable = 0x800000,
> +	.accelID = FB_ACCEL_MATROX_MGAG200,
> +	.lowlevel = &matrox_G100
> +};
>  /* from doc it looks like that accelerator can draw only to low 16MB :-( Direct accesses & displaying are OK for
>     whole 32MB */
>  static struct video_board vbG400 = {
> @@ -1494,6 +1500,13 @@ static struct board {
>  		MGA_G200,
>  		&vbG200,
>  		"MGA-G200 (PCI)"},
> +	{PCI_VENDOR_ID_MATROX,	0x0532,	0xFF,
> +		0,			0,
> +		DEVF_G200,
> +		250000,
> +		MGA_G200,
> +		&vbG200eW,
> +		"MGA-G200eW (PCI)"},
>  	{PCI_VENDOR_ID_MATROX,	PCI_DEVICE_ID_MATROX_G200_AGP,	0xFF,
>  		PCI_SS_VENDOR_ID_MATROX,	PCI_SS_ID_MATROX_GENERIC,
>  		DEVF_G200,
> @@ -2136,6 +2149,8 @@ static const struct pci_device_id matroxfb_devices[] = {
>  		PCI_ANY_ID,	PCI_ANY_ID,	0, 0, 0},
>  	{PCI_VENDOR_ID_MATROX,	PCI_DEVICE_ID_MATROX_G200_PCI,
>  		PCI_ANY_ID,	PCI_ANY_ID,	0, 0, 0},
> +	{PCI_VENDOR_ID_MATROX,	0x0532,
> +		PCI_ANY_ID,	PCI_ANY_ID,	0, 0, 0},
>  	{PCI_VENDOR_ID_MATROX,	PCI_DEVICE_ID_MATROX_G200_AGP,
>  		PCI_ANY_ID,	PCI_ANY_ID,	0, 0, 0},
>  	{PCI_VENDOR_ID_MATROX,	PCI_DEVICE_ID_MATROX_G400,
> 

-- 
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

WARNING: multiple messages have this Message-ID (diff)
From: Thomas Zimmermann <tzimmermann@suse.de>
To: Rich Felker <dalias@libc.org>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-fbdev@vger.kernel.org, Thomas Gleixner <tglx@linutronix.de>,
	dri-devel@lists.freedesktop.org
Subject: Re: [PATCH] matroxfb: add Matrox MGA-G200eW board support
Date: Mon, 27 Jan 2020 08:36:07 +0100	[thread overview]
Message-ID: <1466259e-efe7-df52-c05b-80042628d577@suse.de> (raw)
In-Reply-To: <20200125195506.GA16638@brightrain.aerifal.cx>


[-- Attachment #1.1.1: Type: text/plain, Size: 2288 bytes --]

Hi

Am 25.01.20 um 20:55 schrieb Rich Felker:
> Signed-off-by: Rich Felker <dalias@libc.org>
> --
> I've had this lying around a while and figure I should send it
> upsteam; it's needed to support the onboard video on my Spectre-free
> Atom S1260 server board.

This HW is supported by mgag200, which is maintained. Can't you use that?

Best regards
Thomas

> 
> ---
>  drivers/video/fbdev/matrox/matroxfb_base.c | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/drivers/video/fbdev/matrox/matroxfb_base.c b/drivers/video/fbdev/matrox/matroxfb_base.c
> index 1a555f70923a..ff344313860c 100644
> --- a/drivers/video/fbdev/matrox/matroxfb_base.c
> +++ b/drivers/video/fbdev/matrox/matroxfb_base.c
> @@ -1376,6 +1376,12 @@ static struct video_board vbG200 = {
>  	.accelID = FB_ACCEL_MATROX_MGAG200,
>  	.lowlevel = &matrox_G100
>  };
> +static struct video_board vbG200eW = {
> +	.maxvram = 0x800000,
> +	.maxdisplayable = 0x800000,
> +	.accelID = FB_ACCEL_MATROX_MGAG200,
> +	.lowlevel = &matrox_G100
> +};
>  /* from doc it looks like that accelerator can draw only to low 16MB :-( Direct accesses & displaying are OK for
>     whole 32MB */
>  static struct video_board vbG400 = {
> @@ -1494,6 +1500,13 @@ static struct board {
>  		MGA_G200,
>  		&vbG200,
>  		"MGA-G200 (PCI)"},
> +	{PCI_VENDOR_ID_MATROX,	0x0532,	0xFF,
> +		0,			0,
> +		DEVF_G200,
> +		250000,
> +		MGA_G200,
> +		&vbG200eW,
> +		"MGA-G200eW (PCI)"},
>  	{PCI_VENDOR_ID_MATROX,	PCI_DEVICE_ID_MATROX_G200_AGP,	0xFF,
>  		PCI_SS_VENDOR_ID_MATROX,	PCI_SS_ID_MATROX_GENERIC,
>  		DEVF_G200,
> @@ -2136,6 +2149,8 @@ static const struct pci_device_id matroxfb_devices[] = {
>  		PCI_ANY_ID,	PCI_ANY_ID,	0, 0, 0},
>  	{PCI_VENDOR_ID_MATROX,	PCI_DEVICE_ID_MATROX_G200_PCI,
>  		PCI_ANY_ID,	PCI_ANY_ID,	0, 0, 0},
> +	{PCI_VENDOR_ID_MATROX,	0x0532,
> +		PCI_ANY_ID,	PCI_ANY_ID,	0, 0, 0},
>  	{PCI_VENDOR_ID_MATROX,	PCI_DEVICE_ID_MATROX_G200_AGP,
>  		PCI_ANY_ID,	PCI_ANY_ID,	0, 0, 0},
>  	{PCI_VENDOR_ID_MATROX,	PCI_DEVICE_ID_MATROX_G400,
> 

-- 
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2020-01-27  7:36 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20200125195511eucas1p1d8326b54a4775038cb8b804078afcc19@eucas1p1.samsung.com>
2020-01-25 19:55 ` [PATCH] matroxfb: add Matrox MGA-G200eW board support Rich Felker
2020-01-25 19:55   ` Rich Felker
2020-01-26  7:17   ` Greg Kroah-Hartman
2020-01-26  7:17     ` Greg Kroah-Hartman
2020-01-27 10:40     ` Geert Uytterhoeven
2020-01-27 10:40       ` Geert Uytterhoeven
2020-01-27 11:59       ` Ville Syrjälä
2020-01-27 11:59         ` Ville Syrjälä
2020-01-27  7:36   ` Thomas Zimmermann [this message]
2020-01-27  7:36     ` Thomas Zimmermann
2020-01-28 18:58     ` Rich Felker
2020-01-28 18:58       ` Rich Felker
2020-01-29  7:20       ` Thomas Zimmermann
2020-01-29  7:20         ` Thomas Zimmermann
2020-03-02 15:42   ` Bartlomiej Zolnierkiewicz
2020-03-02 15:42     ` Bartlomiej Zolnierkiewicz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1466259e-efe7-df52-c05b-80042628d577@suse.de \
    --to=tzimmermann@suse.de \
    --cc=b.zolnierkie@samsung.com \
    --cc=dalias@libc.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.