All of lore.kernel.org
 help / color / mirror / Atom feed
From: tthayer@opensource.altera.com (tthayer at opensource.altera.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv4 7/7] ARM: dts: Add Arria10 Ethernet EDAC devicetree entry
Date: Mon, 20 Jun 2016 09:50:52 -0500	[thread overview]
Message-ID: <1466434252-26107-8-git-send-email-tthayer@opensource.altera.com> (raw)
In-Reply-To: <1466434252-26107-1-git-send-email-tthayer@opensource.altera.com>

From: Thor Thayer <tthayer@opensource.altera.com>

Add the device tree entries needed to support the Altera Ethernet
FIFO buffer EDAC on the Arria10 chip.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
v2  No change
v3  Add interrupts for SBERR and DBERR.
v4  No change
---
 arch/arm/boot/dts/socfpga_arria10.dtsi |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 21f6c3c..5cf4dc5 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -628,6 +628,22 @@
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>,
 					     <33 IRQ_TYPE_LEVEL_HIGH>;
 			};
+
+			emac0-rx-ecc at ff8c0800 {
+				compatible = "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0800 0x400>;
+				parent = <&gmac0>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>,
+					     <36 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			emac0-tx-ecc at ff8c0c00 {
+				compatible = "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0c00 0x400>;
+				parent = <&gmac0>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
+					     <37 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		rst: rstmgr at ffd05000 {
-- 
1.7.9.5

WARNING: multiple messages have this Message-ID (diff)
From: <tthayer@opensource.altera.com>
To: bp@alien8.de, dougthompson@xmission.com, m.chehab@samsung.com,
	robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
	ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
	linux@arm.linux.org.uk, dinguyen@opensource.altera.com,
	grant.likely@linaro.org
Cc: devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-edac@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, tthayer.linux@gmail.com,
	tthayer@opensource.altera.com
Subject: [PATCHv4 7/7] ARM: dts: Add Arria10 Ethernet EDAC devicetree entry
Date: Mon, 20 Jun 2016 09:50:52 -0500	[thread overview]
Message-ID: <1466434252-26107-8-git-send-email-tthayer@opensource.altera.com> (raw)
In-Reply-To: <1466434252-26107-1-git-send-email-tthayer@opensource.altera.com>

From: Thor Thayer <tthayer@opensource.altera.com>

Add the device tree entries needed to support the Altera Ethernet
FIFO buffer EDAC on the Arria10 chip.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
v2  No change
v3  Add interrupts for SBERR and DBERR.
v4  No change
---
 arch/arm/boot/dts/socfpga_arria10.dtsi |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 21f6c3c..5cf4dc5 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -628,6 +628,22 @@
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>,
 					     <33 IRQ_TYPE_LEVEL_HIGH>;
 			};
+
+			emac0-rx-ecc@ff8c0800 {
+				compatible = "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0800 0x400>;
+				parent = <&gmac0>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>,
+					     <36 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			emac0-tx-ecc@ff8c0c00 {
+				compatible = "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0c00 0x400>;
+				parent = <&gmac0>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
+					     <37 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		rst: rstmgr@ffd05000 {
-- 
1.7.9.5


WARNING: multiple messages have this Message-ID (diff)
From: <tthayer@opensource.altera.com>
To: <bp@alien8.de>, <dougthompson@xmission.com>,
	<m.chehab@samsung.com>, <robh+dt@kernel.org>,
	<pawel.moll@arm.com>, <mark.rutland@arm.com>,
	<ijc+devicetree@hellion.org.uk>, <galak@codeaurora.org>,
	<linux@arm.linux.org.uk>, <dinguyen@opensource.altera.com>,
	<grant.likely@linaro.org>
Cc: <devicetree@vger.kernel.org>, <linux-doc@vger.kernel.org>,
	<linux-edac@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, <tthayer.linux@gmail.com>,
	<tthayer@opensource.altera.com>
Subject: [PATCHv4 7/7] ARM: dts: Add Arria10 Ethernet EDAC devicetree entry
Date: Mon, 20 Jun 2016 09:50:52 -0500	[thread overview]
Message-ID: <1466434252-26107-8-git-send-email-tthayer@opensource.altera.com> (raw)
In-Reply-To: <1466434252-26107-1-git-send-email-tthayer@opensource.altera.com>

From: Thor Thayer <tthayer@opensource.altera.com>

Add the device tree entries needed to support the Altera Ethernet
FIFO buffer EDAC on the Arria10 chip.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
v2  No change
v3  Add interrupts for SBERR and DBERR.
v4  No change
---
 arch/arm/boot/dts/socfpga_arria10.dtsi |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 21f6c3c..5cf4dc5 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -628,6 +628,22 @@
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>,
 					     <33 IRQ_TYPE_LEVEL_HIGH>;
 			};
+
+			emac0-rx-ecc@ff8c0800 {
+				compatible = "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0800 0x400>;
+				parent = <&gmac0>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>,
+					     <36 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			emac0-tx-ecc@ff8c0c00 {
+				compatible = "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0c00 0x400>;
+				parent = <&gmac0>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
+					     <37 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		rst: rstmgr@ffd05000 {
-- 
1.7.9.5

  parent reply	other threads:[~2016-06-20 14:50 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-20 14:50 [PATCHv4 0/7] Add Ethernet EDAC & peripheral init functions tthayer at opensource.altera.com
2016-06-20 14:50 ` tthayer
2016-06-20 14:50 ` tthayer
2016-06-20 14:50 ` [PATCHv4 1/7] EDAC, altera: Add panic flag check to A10 IRQ tthayer at opensource.altera.com
2016-06-20 14:50   ` tthayer
2016-06-20 14:50   ` tthayer
2016-06-20 14:50 ` [PATCHv4 2/7] EDAC, altera: Make all private data structures static const tthayer at opensource.altera.com
2016-06-20 14:50   ` tthayer
2016-06-20 14:50   ` tthayer
2016-06-20 14:50 ` [PATCHv4 3/7] EDAC, altera: Share Arria10 check_deps & IRQ functions tthayer at opensource.altera.com
2016-06-20 14:50   ` tthayer
2016-06-20 14:50   ` tthayer
2016-06-20 14:50 ` [PATCHv4 4/7] Documentation: dt: socfpga: Add Arria10 Ethernet binding tthayer at opensource.altera.com
2016-06-20 14:50   ` tthayer
2016-06-20 14:50   ` tthayer
2016-06-21 13:33   ` Rob Herring
2016-06-21 13:33     ` Rob Herring
2016-06-21 13:33     ` Rob Herring
2016-06-21 14:46     ` Thor Thayer
2016-06-21 14:46       ` Thor Thayer
2016-06-21 14:46       ` Thor Thayer
2016-06-21 15:48       ` Rob Herring
2016-06-21 15:48         ` Rob Herring
2016-06-21 15:57         ` Thor Thayer
2016-06-21 15:57           ` Thor Thayer
2016-06-21 15:57           ` Thor Thayer
2016-06-20 14:50 ` [PATCHv4 5/7] EDAC, altera: Add Arria10 ECC memory init functions tthayer at opensource.altera.com
2016-06-20 14:50   ` tthayer
2016-06-20 14:50   ` tthayer
2016-06-20 14:50 ` [PATCHv4 6/7] EDAC, altera: Add Arria10 Ethernet EDAC support tthayer at opensource.altera.com
2016-06-20 14:50   ` tthayer
2016-06-20 14:50   ` tthayer
2016-06-20 14:50 ` tthayer at opensource.altera.com [this message]
2016-06-20 14:50   ` [PATCHv4 7/7] ARM: dts: Add Arria10 Ethernet EDAC devicetree entry tthayer
2016-06-20 14:50   ` tthayer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1466434252-26107-8-git-send-email-tthayer@opensource.altera.com \
    --to=tthayer@opensource.altera.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.