* [PATCH 0/7] mac80211/cfg80211: a bunch of patches from our internal tree
@ 2016-07-05 12:23 Luca Coelho
2016-07-05 12:23 ` [PATCH 1/7] nl80211: Add API to support VHT MU-MIMO air sniffer Luca Coelho
` (7 more replies)
0 siblings, 8 replies; 16+ messages in thread
From: Luca Coelho @ 2016-07-05 12:23 UTC (permalink / raw)
To: johannes; +Cc: linux-wireless, Luca Coelho
From: Luca Coelho <luciano.coelho@intel.com>
Hi Johannes,
These are some cfg80211/mac80211 patches that were pending upstreaming
in our internal tree (I think you know about them ;).
Please let me know if everything is okay.
There is a couple of checkpatch >80 chars line warnings, which I
decided to ignore, since fixing them would make things uglier.
One patch required changes in other drivers. Those changes are
compile-tested only.
Cheers,
Luca.
Aviya Erenfeld (1):
nl80211: Add API to support VHT MU-MIMO air sniffer
Avraham Stern (2):
nl80211: Add info to scan results to support beacon report
mac80211: Add support for beacon report radio measurement
Gregory Greenman (1):
cfg80211: handle failed skb allocation
Ilan Peer (1):
mac80211_hwsim: Add radar bandwidths to the P2P Device combination
Johannes Berg (2):
mac80211: report failure to start (partial) scan as scan abort
mac80211: parse wide bandwidth channel switch IE with workaround
drivers/net/wireless/ath/ath10k/mac.c | 14 ++++--
drivers/net/wireless/ath/ath9k/channel.c | 5 +-
drivers/net/wireless/atmel/at76c50x-usb.c | 5 +-
drivers/net/wireless/intel/iwlegacy/common.c | 6 ++-
drivers/net/wireless/intel/iwlwifi/dvm/scan.c | 6 ++-
drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 37 +++++++++++---
drivers/net/wireless/mac80211_hwsim.c | 36 ++++++--------
drivers/net/wireless/st/cw1200/scan.c | 6 ++-
drivers/net/wireless/ti/wl1251/event.c | 6 ++-
drivers/net/wireless/ti/wl1251/main.c | 6 ++-
drivers/net/wireless/ti/wlcore/main.c | 11 ++++-
drivers/net/wireless/ti/wlcore/scan.c | 5 +-
include/net/cfg80211.h | 50 ++++++++++++++++---
include/net/mac80211.h | 5 +-
include/uapi/linux/nl80211.h | 71 +++++++++++++++++++++++++++
net/mac80211/ieee80211_i.h | 1 +
net/mac80211/scan.c | 42 ++++++++++++++--
net/mac80211/spectmgmt.c | 45 +++++++----------
net/wireless/core.c | 4 +-
net/wireless/core.h | 12 +++++
net/wireless/nl80211.c | 63 ++++++++++++++++++++++++
net/wireless/scan.c | 18 ++++---
net/wireless/trace.h | 33 ++++++++++---
net/wireless/util.c | 2 +
24 files changed, 386 insertions(+), 103 deletions(-)
--
2.8.1
^ permalink raw reply [flat|nested] 16+ messages in thread* [PATCH 1/7] nl80211: Add API to support VHT MU-MIMO air sniffer 2016-07-05 12:23 [PATCH 0/7] mac80211/cfg80211: a bunch of patches from our internal tree Luca Coelho @ 2016-07-05 12:23 ` Luca Coelho 2016-07-05 12:23 ` [PATCH 2/7] mac80211_hwsim: Add radar bandwidths to the P2P Device combination Luca Coelho ` (6 subsequent siblings) 7 siblings, 0 replies; 16+ messages in thread From: Luca Coelho @ 2016-07-05 12:23 UTC (permalink / raw) To: johannes; +Cc: linux-wireless, Aviya Erenfeld, Luca Coelho From: Aviya Erenfeld <aviya.erenfeld@intel.com> add API to support VHT MU-MIMO air sniffer. in MU-MIMO there are parallel frames on the air while the HW has only one RX. add the capability to sniff one of the MU-MIMO parallel frames by giving the sniffer additional information so it'll know which of the parallel frames it shall follow. Add attribute - NL80211_ATTR_MU_MIMO_GROUP_DATA - for getting a MU-MIMO groupID in order to monitor packets from that group using VHT MU-MIMO. And add attribute -NL80211_ATTR_MU_MIMO_FOLLOW_ADDR - for passing MAC address to monitor mode. that option will be used by VHT MU-MIMO air sniffer to follow a station according to it's MAC address using VHT MU-MIMO. Signed-off-by: Aviya Erenfeld <aviya.erenfeld@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> --- include/net/cfg80211.h | 10 ++++++++-- include/uapi/linux/nl80211.h | 29 +++++++++++++++++++++++++++++ net/wireless/nl80211.c | 36 ++++++++++++++++++++++++++++++++++++ 3 files changed, 73 insertions(+), 2 deletions(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 7bbb00d..fa4f0f7 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -330,6 +330,9 @@ struct ieee80211_supported_band { * in a separate chapter. */ +#define VHT_MUMIMO_GROUPS_DATA_LEN (WLAN_MEMBERSHIP_LEN +\ + WLAN_USER_POSITION_LEN) + /** * struct vif_params - describes virtual interface parameters * @use_4addr: use 4-address frames @@ -339,10 +342,13 @@ struct ieee80211_supported_band { * This feature is only fully supported by drivers that enable the * %NL80211_FEATURE_MAC_ON_CREATE flag. Others may support creating ** only p2p devices with specified MAC. + * @vht_mumimo_groups: MU-MIMO groupID. used for monitoring only + * packets belonging to that MU-MIMO groupID. */ struct vif_params { - int use_4addr; - u8 macaddr[ETH_ALEN]; + int use_4addr; + u8 macaddr[ETH_ALEN]; + u8 vht_mumimo_groups[VHT_MUMIMO_GROUPS_DATA_LEN]; }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 53c8278..1d7da78 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1829,6 +1829,25 @@ enum nl80211_commands { * %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities per * interface type. * + * @NL80211_ATTR_MU_MIMO_GROUP_DATA: array of 24 bytes that defines a MU-MIMO + * groupID for monitor mode. + * The first 8 bytes are a mask that defines the membership in each + * group (there are 64 groups, group 0 and 63 are reserved), + * each bit represents a group and set to 1 for being a member in + * that group and 0 for not being a member. + * The remaining 16 bytes define the position in each group: 2 bits for + * each group. + * (smaller group numbers represented on most significant bits and bigger + * group numbers on least significant bits.) + * This attribute is used only if all interfaces are in monitor mode. + * Set this attribute in order to monitor packets using the given MU-MIMO + * groupID data. + * to turn off that feature set all the bits of the groupID to zero. + * @NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR: mac address for the sniffer to follow + * when using MU-MIMO air sniffer. + * to turn that feature off set an invalid mac address + * (e.g. FF:FF:FF:FF:FF:FF) + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -2213,6 +2232,9 @@ enum nl80211_attrs { NL80211_ATTR_IFTYPE_EXT_CAPA, + NL80211_ATTR_MU_MIMO_GROUP_DATA, + NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -4479,6 +4501,12 @@ enum nl80211_feature_flags { * %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set * the ASSOC_REQ_USE_RRM flag in the association request even if * NL80211_FEATURE_QUIET is not advertized. + * @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air + * sniffer which means that it can be configured to hear packets from + * certain groups which can be configured by the + * %NL80211_ATTR_MU_MIMO_GROUP_DATA attribute, + * or can be configured to follow a station by configuring the + * %NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR attribute. * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. @@ -4486,6 +4514,7 @@ enum nl80211_feature_flags { enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_VHT_IBSS, NL80211_EXT_FEATURE_RRM, + NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 244d552..447026f 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -405,6 +405,10 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = { [NL80211_ATTR_PBSS] = { .type = NLA_FLAG }, [NL80211_ATTR_BSS_SELECT] = { .type = NLA_NESTED }, [NL80211_ATTR_STA_SUPPORT_P2P_PS] = { .type = NLA_U8 }, + [NL80211_ATTR_MU_MIMO_GROUP_DATA] = { + .len = VHT_MUMIMO_GROUPS_DATA_LEN + }, + [NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR] = { .len = ETH_ALEN }, }; /* policy for the key attributes */ @@ -2695,6 +2699,38 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info) change = true; } + if (info->attrs[NL80211_ATTR_MU_MIMO_GROUP_DATA]) { + const u8 *mumimo_groups; + u32 cap_flag = NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER; + + if (!wiphy_ext_feature_isset(&rdev->wiphy, cap_flag)) + return -EOPNOTSUPP; + + mumimo_groups = + nla_data(info->attrs[NL80211_ATTR_MU_MIMO_GROUP_DATA]); + + /* bits 0 and 63 are reserved and must be zero */ + if ((mumimo_groups[0] & BIT(7)) || + (mumimo_groups[VHT_MUMIMO_GROUPS_DATA_LEN - 1] & BIT(0))) + return -EINVAL; + + memcpy(params.vht_mumimo_groups, mumimo_groups, + VHT_MUMIMO_GROUPS_DATA_LEN); + change = true; + } + + if (info->attrs[NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR]) { + u32 cap_flag = NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER; + + if (!wiphy_ext_feature_isset(&rdev->wiphy, cap_flag)) + return -EOPNOTSUPP; + + nla_memcpy(params.macaddr, + info->attrs[NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR], + ETH_ALEN); + change = true; + } + if (flags && (*flags & MONITOR_FLAG_ACTIVE) && !(rdev->wiphy.features & NL80211_FEATURE_ACTIVE_MONITOR)) return -EOPNOTSUPP; -- 2.8.1 ^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 2/7] mac80211_hwsim: Add radar bandwidths to the P2P Device combination 2016-07-05 12:23 [PATCH 0/7] mac80211/cfg80211: a bunch of patches from our internal tree Luca Coelho 2016-07-05 12:23 ` [PATCH 1/7] nl80211: Add API to support VHT MU-MIMO air sniffer Luca Coelho @ 2016-07-05 12:23 ` Luca Coelho 2016-07-05 12:23 ` [PATCH 3/7] cfg80211: handle failed skb allocation Luca Coelho ` (5 subsequent siblings) 7 siblings, 0 replies; 16+ messages in thread From: Luca Coelho @ 2016-07-05 12:23 UTC (permalink / raw) To: johannes; +Cc: linux-wireless, Ilan Peer, Luca Coelho From: Ilan Peer <ilan.peer@intel.com> Add radar_detect_widths to the interface combination that allows concurrent P2P Device dedicated interface and AP interfaces, to enable testing of radar detection when P2P Device interface is used. Clear the radar_detect_widths in case of multi channel contexts as this is not currently supported. As radar_detect_widths are now supported in all combinations, remove the hwsim_if_dfs_limits definition since it is no longer needed. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> --- drivers/net/wireless/mac80211_hwsim.c | 25 +++++-------------------- 1 file changed, 5 insertions(+), 20 deletions(-) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 382109bb..97196c4 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -457,10 +457,6 @@ static const struct ieee80211_iface_limit hwsim_if_limits[] = { { .max = 1, .types = BIT(NL80211_IFTYPE_P2P_DEVICE) } }; -static const struct ieee80211_iface_limit hwsim_if_dfs_limits[] = { - { .max = 8, .types = BIT(NL80211_IFTYPE_AP) }, -}; - static const struct ieee80211_iface_combination hwsim_if_comb[] = { { .limits = hwsim_if_limits, @@ -468,18 +464,12 @@ static const struct ieee80211_iface_combination hwsim_if_comb[] = { .n_limits = ARRAY_SIZE(hwsim_if_limits) - 1, .max_interfaces = 2048, .num_different_channels = 1, - }, - { - .limits = hwsim_if_dfs_limits, - .n_limits = ARRAY_SIZE(hwsim_if_dfs_limits), - .max_interfaces = 8, - .num_different_channels = 1, .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) | BIT(NL80211_CHAN_WIDTH_20) | BIT(NL80211_CHAN_WIDTH_40) | BIT(NL80211_CHAN_WIDTH_80) | BIT(NL80211_CHAN_WIDTH_160), - } + }, }; static const struct ieee80211_iface_combination hwsim_if_comb_p2p_dev[] = { @@ -488,18 +478,12 @@ static const struct ieee80211_iface_combination hwsim_if_comb_p2p_dev[] = { .n_limits = ARRAY_SIZE(hwsim_if_limits), .max_interfaces = 2048, .num_different_channels = 1, - }, - { - .limits = hwsim_if_dfs_limits, - .n_limits = ARRAY_SIZE(hwsim_if_dfs_limits), - .max_interfaces = 8, - .num_different_channels = 1, .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) | BIT(NL80211_CHAN_WIDTH_20) | BIT(NL80211_CHAN_WIDTH_40) | BIT(NL80211_CHAN_WIDTH_80) | BIT(NL80211_CHAN_WIDTH_160), - } + }, }; static spinlock_t hwsim_radio_lock; @@ -2487,13 +2471,14 @@ static int mac80211_hwsim_new_radio(struct genl_info *info, hw->wiphy->max_scan_ssids = 255; hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN; hw->wiphy->max_remain_on_channel_duration = 1000; - /* For channels > 1 DFS is not allowed */ - hw->wiphy->n_iface_combinations = 1; hw->wiphy->iface_combinations = &data->if_combination; if (param->p2p_device) data->if_combination = hwsim_if_comb_p2p_dev[0]; else data->if_combination = hwsim_if_comb[0]; + hw->wiphy->n_iface_combinations = 1; + /* For channels > 1 DFS is not allowed */ + data->if_combination.radar_detect_widths = 0; data->if_combination.num_different_channels = data->channels; } else if (param->p2p_device) { hw->wiphy->iface_combinations = hwsim_if_comb_p2p_dev; -- 2.8.1 ^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 3/7] cfg80211: handle failed skb allocation 2016-07-05 12:23 [PATCH 0/7] mac80211/cfg80211: a bunch of patches from our internal tree Luca Coelho 2016-07-05 12:23 ` [PATCH 1/7] nl80211: Add API to support VHT MU-MIMO air sniffer Luca Coelho 2016-07-05 12:23 ` [PATCH 2/7] mac80211_hwsim: Add radar bandwidths to the P2P Device combination Luca Coelho @ 2016-07-05 12:23 ` Luca Coelho 2016-07-06 11:51 ` Johannes Berg 2016-07-05 12:23 ` [PATCH 4/7] nl80211: Add info to scan results to support beacon report Luca Coelho ` (4 subsequent siblings) 7 siblings, 1 reply; 16+ messages in thread From: Luca Coelho @ 2016-07-05 12:23 UTC (permalink / raw) To: johannes; +Cc: linux-wireless, Gregory Greenman, Luca Coelho From: Gregory Greenman <gregory.greenman@intel.com> Handle the case when dev_alloc_skb returns NULL. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> --- net/wireless/util.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/wireless/util.c b/net/wireless/util.c index 2443ee3..b7d1592 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -721,6 +721,8 @@ __ieee80211_amsdu_copy(struct sk_buff *skb, unsigned int hlen, * alignment since sizeof(struct ethhdr) is 14. */ frame = dev_alloc_skb(hlen + sizeof(struct ethhdr) + 2 + cur_len); + if (!frame) + return NULL; skb_reserve(frame, hlen + sizeof(struct ethhdr) + 2); skb_copy_bits(skb, offset, skb_put(frame, cur_len), cur_len); -- 2.8.1 ^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH 3/7] cfg80211: handle failed skb allocation 2016-07-05 12:23 ` [PATCH 3/7] cfg80211: handle failed skb allocation Luca Coelho @ 2016-07-06 11:51 ` Johannes Berg 2016-07-06 11:53 ` Luca Coelho 0 siblings, 1 reply; 16+ messages in thread From: Johannes Berg @ 2016-07-06 11:51 UTC (permalink / raw) To: Luca Coelho; +Cc: linux-wireless, Gregory Greenman, Luca Coelho On Tue, 2016-07-05 at 15:23 +0300, Luca Coelho wrote: > From: Gregory Greenman <gregory.greenman@intel.com> > > Handle the case when dev_alloc_skb returns NULL. > Applied. A Fixes: tag would have been nice, but I added one :) johannes ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 3/7] cfg80211: handle failed skb allocation 2016-07-06 11:51 ` Johannes Berg @ 2016-07-06 11:53 ` Luca Coelho 0 siblings, 0 replies; 16+ messages in thread From: Luca Coelho @ 2016-07-06 11:53 UTC (permalink / raw) To: Johannes Berg; +Cc: linux-wireless, Gregory Greenman On Wed, 2016-07-06 at 13:51 +0200, Johannes Berg wrote: > On Tue, 2016-07-05 at 15:23 +0300, Luca Coelho wrote: > > From: Gregory Greenman <gregory.greenman@intel.com> > > > > Handle the case when dev_alloc_skb returns NULL. > > > Applied. A Fixes: tag would have been nice, but I added one :) Oh, did I miss that one? Sorry. I tried to add "Fixes" to all the relevant patches I sent... but probably missed some. -- Luca. ^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 4/7] nl80211: Add info to scan results to support beacon report 2016-07-05 12:23 [PATCH 0/7] mac80211/cfg80211: a bunch of patches from our internal tree Luca Coelho ` (2 preceding siblings ...) 2016-07-05 12:23 ` [PATCH 3/7] cfg80211: handle failed skb allocation Luca Coelho @ 2016-07-05 12:23 ` Luca Coelho 2016-07-05 13:18 ` kbuild test robot ` (3 more replies) 2016-07-05 12:23 ` [PATCH 5/7] mac80211: Add support for beacon report radio measurement Luca Coelho ` (3 subsequent siblings) 7 siblings, 4 replies; 16+ messages in thread From: Luca Coelho @ 2016-07-05 12:23 UTC (permalink / raw) To: johannes Cc: linux-wireless, Avraham Stern, Assaf Krauss, David Spinadel, Luca Coelho From: Avraham Stern <avraham.stern@intel.com> Beacon report radio measurement requires reporting observed BSSs on the channels specified in the beacon request. If the measurement mode is set to passive or active, it requires actually performing a scan (passive or active, accordingly), and reporting the time that the scan was started and the time each beacon/probe was received (both in terms of TSF of the BSS of the requesting AP). If the request mode is table, this information is optional. In addition, the radio measurement request specifies the channel dwell time for the measurement. In order to use scan for beacon report when the mode is active or passive, add a parameter to scan request that specifies the channel dwell time, and add scan start time and beacon received time to scan results information. Supporting beacon report is required for Multi Band Operation (MBO). Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> --- include/net/cfg80211.h | 40 +++++++++++++++++++++++++++++++++++----- include/uapi/linux/nl80211.h | 42 ++++++++++++++++++++++++++++++++++++++++++ net/mac80211/scan.c | 9 +++++++-- net/wireless/core.c | 4 ++-- net/wireless/core.h | 12 ++++++++++++ net/wireless/nl80211.c | 27 +++++++++++++++++++++++++++ net/wireless/scan.c | 18 ++++++++++++------ net/wireless/trace.h | 33 +++++++++++++++++++++++++-------- 8 files changed, 162 insertions(+), 23 deletions(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index fa4f0f7..e2658e3 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1424,6 +1424,21 @@ struct cfg80211_ssid { }; /** + * struct cfg80211_scan_info - information about completed scan + * @scan_start_tsf: scan start time in terms of the TSF of the BSS that the + * wireless device that requested the scan is connected to. If this + * information is not available, this field is left zero. + * @tsf_bssid: the BSSID according to which %scan_start_tsf is set. + * @aborted: set to true if the scan was aborted for any reason, + * userspace will be notified of that + */ +struct cfg80211_scan_info { + u64 scan_start_tsf; + u8 tsf_bssid[ETH_ALEN] __aligned(2); + bool aborted; +}; + +/** * struct cfg80211_scan_request - scan request description * * @ssids: SSIDs to scan for (active scan only) @@ -1433,12 +1448,17 @@ struct cfg80211_ssid { * @scan_width: channel width for scanning * @ie: optional information element(s) to add into Probe Request or %NULL * @ie_len: length of ie in octets + * @duration: how long to listen on each channel, in TUs. If + * %duration_mandatory is not set, this is the maximum dwell time and + * the actual dwell time may be shorter. + * @duration_mandatory: if set, the scan duration must be as specified by the + * %duration field. * @flags: bit field of flags controlling operation * @rates: bitmap of rates to advertise for each band * @wiphy: the wiphy this was for * @scan_start: time (in jiffies) when the scan started * @wdev: the wireless device to scan for - * @aborted: (internal) scan request was notified as aborted + * @info: (internal) information about completed scan * @notified: (internal) scan request was notified as done or aborted * @no_cck: used to send probe requests at non CCK rate in 2GHz band * @mac_addr: MAC address used with randomisation @@ -1454,6 +1474,8 @@ struct cfg80211_scan_request { enum nl80211_bss_scan_width scan_width; const u8 *ie; size_t ie_len; + u16 duration; + bool duration_mandatory; u32 flags; u32 rates[NUM_NL80211_BANDS]; @@ -1467,7 +1489,8 @@ struct cfg80211_scan_request { /* internal */ struct wiphy *wiphy; unsigned long scan_start; - bool aborted, notified; + struct cfg80211_scan_info info; + bool notified; bool no_cck; /* keep last */ @@ -1600,12 +1623,19 @@ enum cfg80211_signal_type { * buffered on the device) and be accurate to about 10ms. * If the frame isn't buffered, just passing the return value of * ktime_get_boot_ns() is likely appropriate. + * @parent_tsf: the time at the start of reception of the first octet of the + * timestamp field of the frame. The time is the TSF of the BSS specified + * by %parent_bssid. + * @parent_bssid: the BSS according to which %parent_tsf is set. This is set to + * the BSS that requested the scan in which the beacon/probe was received. */ struct cfg80211_inform_bss { struct ieee80211_channel *chan; enum nl80211_bss_scan_width scan_width; s32 signal; u64 boottime_ns; + u64 parent_tsf; + u8 parent_bssid[ETH_ALEN] __aligned(2); }; /** @@ -4067,10 +4097,10 @@ const char *reg_initiator_name(enum nl80211_reg_initiator initiator); * cfg80211_scan_done - notify that scan finished * * @request: the corresponding scan request - * @aborted: set to true if the scan was aborted for any reason, - * userspace will be notified of that + * @info: information about the completed scan */ -void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted); +void cfg80211_scan_done(struct cfg80211_scan_request *request, + struct cfg80211_scan_info *info); /** * cfg80211_sched_scan_results - notify that new scan results are available diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 1d7da78..b39ccab 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1848,6 +1848,22 @@ enum nl80211_commands { * to turn that feature off set an invalid mac address * (e.g. FF:FF:FF:FF:FF:FF) * + * @NL80211_ATTR_SCAN_START_TIME_TSF: The time at which the scan was actually + * started (u64). The time is the TSF of the BSS the interface that + * requested the scan is connected to (if available, otherwise this + * attribute must not be included). + * @NL80211_ATTR_SCAN_START_TIME_TSF_BSSID: The BSS according to which + * %NL80211_ATTR_SCAN_START_TIME_TSF is set. + * @NL80211_ATTR_MEASUREMENT_DURATION: measurement duration in TUs (u16). If + * %NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY is not set, this is the + * maximum measurement duration allowed. This attribute is used with + * measurement requests. It can also be used with %NL80211_CMD_TRIGGER_SCAN + * if the scan is used for beacon report radio measurement. + * @NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY: flag attribute that indicates + * that the duration specified with %NL80211_ATTR_MEASUREMENT_DURATION is + * mandatory. If this flag is not set, the duration is the maximum duration + * and the actual measurement duration may be shorter. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -2235,6 +2251,11 @@ enum nl80211_attrs { NL80211_ATTR_MU_MIMO_GROUP_DATA, NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR, + NL80211_ATTR_SCAN_START_TIME_TSF, + NL80211_ATTR_SCAN_START_TIME_TSF_BSSID, + NL80211_ATTR_MEASUREMENT_DURATION, + NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3496,6 +3517,12 @@ enum nl80211_bss_scan_width { * was last updated by a received frame. The value is expected to be * accurate to about 10ms. (u64, nanoseconds) * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment + * @NL80211_BSS_PARENT_TSF: the time at the start of reception of the first + * octet of the timestamp field of the last beacon/probe received for + * this BSS. The time is the TSF of the BSS specified by + * @NL80211_BSS_PARENT_BSSID. (u64). + * @NL80211_BSS_PARENT_BSSID: the BSS according to which @NL80211_BSS_PARENT_TSF + * is set. * @__NL80211_BSS_AFTER_LAST: internal * @NL80211_BSS_MAX: highest BSS attribute */ @@ -3517,6 +3544,8 @@ enum nl80211_bss { NL80211_BSS_PRESP_DATA, NL80211_BSS_LAST_SEEN_BOOTTIME, NL80211_BSS_PAD, + NL80211_BSS_PARENT_TSF, + NL80211_BSS_PARENT_BSSID, /* keep last */ __NL80211_BSS_AFTER_LAST, @@ -4507,6 +4536,16 @@ enum nl80211_feature_flags { * %NL80211_ATTR_MU_MIMO_GROUP_DATA attribute, * or can be configured to follow a station by configuring the * %NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR attribute. + * @NL80211_EXT_FEATURE_SCAN_START_TIME: This driver includes the actual + * time the scan started in scan results event. The time is the TSF of + * the BSS that the interface that requested the scan is connected to + * (if available). + * @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the + * time the last beacon/probe was received. The time is the TSF of the + * BSS that the interface that requested the scan is connected to + * (if available). + * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of + * channel dwell time. * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. @@ -4515,6 +4554,9 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_VHT_IBSS, NL80211_EXT_FEATURE_RRM, NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER, + NL80211_EXT_FEATURE_SCAN_START_TIME, + NL80211_EXT_FEATURE_BSS_PARENT_TSF, + NL80211_EXT_FEATURE_SET_SCAN_DWELL, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index f9648ef..4ec1c52 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -353,8 +353,13 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) scan_req = rcu_dereference_protected(local->scan_req, lockdep_is_held(&local->mtx)); - if (scan_req != local->int_scan_req) - cfg80211_scan_done(scan_req, aborted); + if (scan_req != local->int_scan_req) { + struct cfg80211_scan_info info = { + .aborted = aborted, + }; + + cfg80211_scan_done(scan_req, &info); + } RCU_INIT_POINTER(local->scan_req, NULL); scan_sdata = rcu_dereference_protected(local->scan_sdata, diff --git a/net/wireless/core.c b/net/wireless/core.c index 39d9abd..7645e97 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -220,7 +220,7 @@ void cfg80211_stop_p2p_device(struct cfg80211_registered_device *rdev, if (rdev->scan_req && rdev->scan_req->wdev == wdev) { if (WARN_ON(!rdev->scan_req->notified)) - rdev->scan_req->aborted = true; + rdev->scan_req->info.aborted = true; ___cfg80211_scan_done(rdev, false); } } @@ -1087,7 +1087,7 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb, cfg80211_update_iface_num(rdev, wdev->iftype, -1); if (rdev->scan_req && rdev->scan_req->wdev == wdev) { if (WARN_ON(!rdev->scan_req->notified)) - rdev->scan_req->aborted = true; + rdev->scan_req->info.aborted = true; ___cfg80211_scan_done(rdev, false); } diff --git a/net/wireless/core.h b/net/wireless/core.h index a4d547f..eee9144 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -141,6 +141,18 @@ struct cfg80211_internal_bss { unsigned long refcount; atomic_t hold; + /* time at the start of the reception of the first octet of the + * timestamp field of the last beacon/probe received for this BSS. + * The time is the TSF of the BSS specified by %parent_bssid. + */ + u64 parent_tsf; + + /* the BSS according to which %parent_tsf is set. This is set to + * the BSS that the interface that requested the scan was connected to + * when the beacon/probe was received. + */ + u8 parent_bssid[ETH_ALEN] __aligned(2); + /* must be last because of priv member */ struct cfg80211_bss pub; }; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 447026f..c53b546 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -6223,6 +6223,19 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info) } } + if (info->attrs[NL80211_ATTR_MEASUREMENT_DURATION]) { + if (!wiphy_ext_feature_isset(wiphy, + NL80211_EXT_FEATURE_SET_SCAN_DWELL)) { + err = -EOPNOTSUPP; + goto out_free; + } + + request->duration = + nla_get_u16(info->attrs[NL80211_ATTR_MEASUREMENT_DURATION]); + request->duration_mandatory = + nla_get_flag(info->attrs[NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY]); + } + if (info->attrs[NL80211_ATTR_SCAN_FLAGS]) { request->flags = nla_get_u32( info->attrs[NL80211_ATTR_SCAN_FLAGS]); @@ -7056,6 +7069,13 @@ static int nl80211_send_bss(struct sk_buff *msg, struct netlink_callback *cb, jiffies_to_msecs(jiffies - intbss->ts))) goto nla_put_failure; + if (intbss->parent_tsf && + (nla_put_u64_64bit(msg, NL80211_BSS_PARENT_TSF, + intbss->parent_tsf, NL80211_BSS_PAD) || + nla_put(msg, NL80211_BSS_PARENT_BSSID, ETH_ALEN, + intbss->parent_bssid))) + goto nla_put_failure; + if (intbss->ts_boottime && nla_put_u64_64bit(msg, NL80211_BSS_LAST_SEEN_BOOTTIME, intbss->ts_boottime, NL80211_BSS_PAD)) @@ -11829,6 +11849,13 @@ static int nl80211_add_scan_req(struct sk_buff *msg, nla_put_u32(msg, NL80211_ATTR_SCAN_FLAGS, req->flags)) goto nla_put_failure; + if (req->info.scan_start_tsf && + (nla_put_u64_64bit(msg, NL80211_ATTR_SCAN_START_TIME_TSF, + req->info.scan_start_tsf, NL80211_BSS_PAD) || + nla_put(msg, NL80211_ATTR_SCAN_START_TIME_TSF_BSSID, ETH_ALEN, + req->info.tsf_bssid))) + goto nla_put_failure; + return 0; nla_put_failure: return -ENOBUFS; diff --git a/net/wireless/scan.c b/net/wireless/scan.c index ef2955c..0358e12 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -3,6 +3,7 @@ * * Copyright 2008 Johannes Berg <johannes@sipsolutions.net> * Copyright 2013-2014 Intel Mobile Communications GmbH + * Copyright 2016 Intel Deutschland GmbH */ #include <linux/kernel.h> #include <linux/slab.h> @@ -194,7 +195,7 @@ void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev, if (wdev->netdev) cfg80211_sme_scan_done(wdev->netdev); - if (!request->aborted && + if (!request->info.aborted && request->flags & NL80211_SCAN_FLAG_FLUSH) { /* flush entries from previous scans */ spin_lock_bh(&rdev->bss_lock); @@ -202,10 +203,10 @@ void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev, spin_unlock_bh(&rdev->bss_lock); } - msg = nl80211_build_scan_msg(rdev, wdev, request->aborted); + msg = nl80211_build_scan_msg(rdev, wdev, request->info.aborted); #ifdef CONFIG_CFG80211_WEXT - if (wdev->netdev && !request->aborted) { + if (wdev->netdev && !request->info.aborted) { memset(&wrqu, 0, sizeof(wrqu)); wireless_send_event(wdev->netdev, SIOCGIWSCAN, &wrqu, NULL); @@ -236,12 +237,13 @@ void __cfg80211_scan_done(struct work_struct *wk) rtnl_unlock(); } -void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted) +void cfg80211_scan_done(struct cfg80211_scan_request *request, + struct cfg80211_scan_info *info) { - trace_cfg80211_scan_done(request, aborted); + trace_cfg80211_scan_done(request, info); WARN_ON(request != wiphy_to_rdev(request->wiphy)->scan_req); - request->aborted = aborted; + request->info = *info; request->notified = true; queue_work(cfg80211_wq, &wiphy_to_rdev(request->wiphy)->scan_done_wk); } @@ -843,6 +845,8 @@ cfg80211_bss_update(struct cfg80211_registered_device *rdev, found->pub.capability = tmp->pub.capability; found->ts = tmp->ts; found->ts_boottime = tmp->ts_boottime; + found->parent_tsf = tmp->parent_tsf; + ether_addr_copy(found->parent_bssid, tmp->parent_bssid); } else { struct cfg80211_internal_bss *new; struct cfg80211_internal_bss *hidden; @@ -1086,6 +1090,8 @@ cfg80211_inform_bss_frame_data(struct wiphy *wiphy, tmp.pub.beacon_interval = le16_to_cpu(mgmt->u.probe_resp.beacon_int); tmp.pub.capability = le16_to_cpu(mgmt->u.probe_resp.capab_info); tmp.ts_boottime = data->boottime_ns; + tmp.parent_tsf = data->parent_tsf; + ether_addr_copy(tmp.parent_bssid, data->parent_bssid); signal_valid = abs(data->chan->center_freq - channel->center_freq) <= wiphy->max_adj_channel_rssi_comp; diff --git a/net/wireless/trace.h b/net/wireless/trace.h index 3c1091a..72b5255 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -2642,8 +2642,9 @@ TRACE_EVENT(cfg80211_tdls_oper_request, ); TRACE_EVENT(cfg80211_scan_done, - TP_PROTO(struct cfg80211_scan_request *request, bool aborted), - TP_ARGS(request, aborted), + TP_PROTO(struct cfg80211_scan_request *request, + struct cfg80211_scan_info *info), + TP_ARGS(request, info), TP_STRUCT__entry( __field(u32, n_channels) __dynamic_array(u8, ie, request ? request->ie_len : 0) @@ -2652,6 +2653,8 @@ TRACE_EVENT(cfg80211_scan_done, MAC_ENTRY(wiphy_mac) __field(bool, no_cck) __field(bool, aborted) + __field(u64, scan_start_tsf) + MAC_ENTRY(tsf_bssid) ), TP_fast_assign( if (request) { @@ -2666,9 +2669,16 @@ TRACE_EVENT(cfg80211_scan_done, request->wiphy->perm_addr); __entry->no_cck = request->no_cck; } - __entry->aborted = aborted; + if (info) { + __entry->aborted = info->aborted; + __entry->scan_start_tsf = info->scan_start_tsf; + MAC_ASSIGN(tsf_bssid, info->tsf_bssid); + } ), - TP_printk("aborted: %s", BOOL_TO_STR(__entry->aborted)) + TP_printk("aborted: %s, scan start (TSF): %llu, tsf_bssid: " MAC_PR_FMT, + BOOL_TO_STR(__entry->aborted), + (unsigned long long)__entry->scan_start_tsf, + MAC_PR_ARG(tsf_bssid)) ); DEFINE_EVENT(wiphy_only_evt, cfg80211_sched_scan_results, @@ -2721,6 +2731,8 @@ TRACE_EVENT(cfg80211_inform_bss_frame, __dynamic_array(u8, mgmt, len) __field(s32, signal) __field(u64, ts_boottime) + __field(u64, parent_tsf) + MAC_ENTRY(parent_bssid) ), TP_fast_assign( WIPHY_ASSIGN; @@ -2730,10 +2742,15 @@ TRACE_EVENT(cfg80211_inform_bss_frame, memcpy(__get_dynamic_array(mgmt), mgmt, len); __entry->signal = data->signal; __entry->ts_boottime = data->boottime_ns; - ), - TP_printk(WIPHY_PR_FMT ", " CHAN_PR_FMT "(scan_width: %d) signal: %d, tsb:%llu", - WIPHY_PR_ARG, CHAN_PR_ARG, __entry->scan_width, - __entry->signal, (unsigned long long)__entry->ts_boottime) + __entry->parent_tsf = data->parent_tsf; + MAC_ASSIGN(parent_bssid, data->parent_bssid); + ), + TP_printk(WIPHY_PR_FMT ", " CHAN_PR_FMT + "(scan_width: %d) signal: %d, tsb:%llu, detect_tsf:%llu, tsf_bssid: " + MAC_PR_FMT, WIPHY_PR_ARG, CHAN_PR_ARG, __entry->scan_width, + __entry->signal, (unsigned long long)__entry->ts_boottime, + (unsigned long long)__entry->parent_tsf, + MAC_PR_ARG(parent_bssid)) ); DECLARE_EVENT_CLASS(cfg80211_bss_evt, -- 2.8.1 ^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH 4/7] nl80211: Add info to scan results to support beacon report 2016-07-05 12:23 ` [PATCH 4/7] nl80211: Add info to scan results to support beacon report Luca Coelho @ 2016-07-05 13:18 ` kbuild test robot 2016-07-05 13:22 ` kbuild test robot ` (2 subsequent siblings) 3 siblings, 0 replies; 16+ messages in thread From: kbuild test robot @ 2016-07-05 13:18 UTC (permalink / raw) To: Luca Coelho Cc: kbuild-all, johannes, linux-wireless, Avraham Stern, Assaf Krauss, David Spinadel, Luca Coelho [-- Attachment #1: Type: text/plain, Size: 6761 bytes --] Hi, [auto build test WARNING on mac80211-next/master] [also build test WARNING on next-20160705] [cannot apply to v4.7-rc6] [if your patch is applied to the wrong git tree, please drop us a note to help improve the system] url: https://github.com/0day-ci/linux/commits/Luca-Coelho/mac80211-cfg80211-a-bunch-of-patches-from-our-internal-tree/20160705-202748 base: https://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git master config: x86_64-randconfig-i0-201627 (attached as .config) compiler: gcc-6 (Debian 6.1.1-1) 6.1.1 20160430 reproduce: # save the attached .config to linux build tree make ARCH=x86_64 All warnings (new ones prefixed by >>): drivers/net/wireless/ath/ath6kl/cfg80211.c: In function 'ath6kl_cfg80211_disconnect_event': >> drivers/net/wireless/ath/ath6kl/cfg80211.c:862:37: warning: passing argument 2 of 'cfg80211_scan_done' makes pointer from integer without a cast [-Wint-conversion] cfg80211_scan_done(vif->scan_req, true); ^~~~ In file included from drivers/net/wireless/ath/ath6kl/core.h:26:0, from drivers/net/wireless/ath/ath6kl/cfg80211.c:24: include/net/cfg80211.h:4102:6: note: expected 'struct cfg80211_scan_info *' but argument is of type 'int' void cfg80211_scan_done(struct cfg80211_scan_request *request, ^~~~~~~~~~~~~~~~~~ drivers/net/wireless/ath/ath6kl/cfg80211.c: In function 'ath6kl_cfg80211_scan_complete_event': drivers/net/wireless/ath/ath6kl/cfg80211.c:1092:36: error: incompatible type for argument 2 of 'cfg80211_scan_done' cfg80211_scan_done(vif->scan_req, aborted); ^~~~~~~ In file included from drivers/net/wireless/ath/ath6kl/core.h:26:0, from drivers/net/wireless/ath/ath6kl/cfg80211.c:24: include/net/cfg80211.h:4102:6: note: expected 'struct cfg80211_scan_info *' but argument is of type 'bool {aka _Bool}' void cfg80211_scan_done(struct cfg80211_scan_request *request, ^~~~~~~~~~~~~~~~~~ drivers/net/wireless/ath/ath6kl/cfg80211.c: In function 'ath6kl_cfg80211_vif_stop': drivers/net/wireless/ath/ath6kl/cfg80211.c:3617:37: warning: passing argument 2 of 'cfg80211_scan_done' makes pointer from integer without a cast [-Wint-conversion] cfg80211_scan_done(vif->scan_req, true); ^~~~ In file included from drivers/net/wireless/ath/ath6kl/core.h:26:0, from drivers/net/wireless/ath/ath6kl/cfg80211.c:24: include/net/cfg80211.h:4102:6: note: expected 'struct cfg80211_scan_info *' but argument is of type 'int' void cfg80211_scan_done(struct cfg80211_scan_request *request, ^~~~~~~~~~~~~~~~~~ -- drivers/net/wireless/marvell/mwifiex/main.c: In function 'mwifiex_close': >> drivers/net/wireless/marvell/mwifiex/main.c:702:42: warning: passing argument 2 of 'cfg80211_scan_done' makes pointer from integer without a cast [-Wint-conversion] cfg80211_scan_done(priv->scan_request, 1); ^ In file included from include/net/mac80211.h:23:0, from drivers/net/wireless/marvell/mwifiex/decl.h:30, from drivers/net/wireless/marvell/mwifiex/main.h:52, from drivers/net/wireless/marvell/mwifiex/main.c:20: include/net/cfg80211.h:4102:6: note: expected 'struct cfg80211_scan_info *' but argument is of type 'int' void cfg80211_scan_done(struct cfg80211_scan_request *request, ^~~~~~~~~~~~~~~~~~ -- drivers/net/wireless/marvell/mwifiex/scan.c: In function 'mwifiex_check_next_scan_command': >> drivers/net/wireless/marvell/mwifiex/scan.c:1982:44: warning: passing argument 2 of 'cfg80211_scan_done' makes pointer from integer without a cast [-Wint-conversion] cfg80211_scan_done(priv->scan_request, 1); ^ In file included from include/net/mac80211.h:23:0, from drivers/net/wireless/marvell/mwifiex/decl.h:30, from drivers/net/wireless/marvell/mwifiex/scan.c:20: include/net/cfg80211.h:4102:6: note: expected 'struct cfg80211_scan_info *' but argument is of type 'int' void cfg80211_scan_done(struct cfg80211_scan_request *request, ^~~~~~~~~~~~~~~~~~ vim +/cfg80211_scan_done +862 drivers/net/wireless/ath/ath6kl/cfg80211.c 8c8b65e3e Vasanthakumar Thiagarajan 2011-10-25 846 memset(vif->req_bssid, 0, sizeof(vif->req_bssid)); bdcd81707 Kalle Valo 2011-07-18 847 bdcd81707 Kalle Valo 2011-07-18 848 up(&ar->sem); bdcd81707 Kalle Valo 2011-07-18 849 14ee6f6b7 Vasanthakumar Thiagarajan 2011-10-25 850 vif->sme_state = SME_DISCONNECTED; 170826dd0 Vasanthakumar Thiagarajan 2011-09-10 851 bdcd81707 Kalle Valo 2011-07-18 852 return 0; bdcd81707 Kalle Valo 2011-07-18 853 } bdcd81707 Kalle Valo 2011-07-18 854 240d27994 Vasanthakumar Thiagarajan 2011-10-25 855 void ath6kl_cfg80211_disconnect_event(struct ath6kl_vif *vif, u8 reason, bdcd81707 Kalle Valo 2011-07-18 856 u8 *bssid, u8 assoc_resp_len, bdcd81707 Kalle Valo 2011-07-18 857 u8 *assoc_info, u16 proto_reason) bdcd81707 Kalle Valo 2011-07-18 858 { 240d27994 Vasanthakumar Thiagarajan 2011-10-25 859 struct ath6kl *ar = vif->ar; 59c98449b Vasanthakumar Thiagarajan 2011-10-25 860 14ee6f6b7 Vasanthakumar Thiagarajan 2011-10-25 861 if (vif->scan_req) { 14ee6f6b7 Vasanthakumar Thiagarajan 2011-10-25 @862 cfg80211_scan_done(vif->scan_req, true); 14ee6f6b7 Vasanthakumar Thiagarajan 2011-10-25 863 vif->scan_req = NULL; bdcd81707 Kalle Valo 2011-07-18 864 } bdcd81707 Kalle Valo 2011-07-18 865 f5938f249 Vasanthakumar Thiagarajan 2011-10-25 866 if (vif->nw_type & ADHOC_NETWORK) { fe94f3a4f Antonio Quartulli 2014-01-29 867 if (vif->wdev.iftype != NL80211_IFTYPE_ADHOC) bdcd81707 Kalle Valo 2011-07-18 868 ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, bdcd81707 Kalle Valo 2011-07-18 869 "%s: ath6k not in ibss mode\n", __func__); bdcd81707 Kalle Valo 2011-07-18 870 return; :::::: The code at line 862 was first introduced by commit :::::: 14ee6f6b7db968229edb7524588e71182c843080 ath6kl: Move scan_req info and sme_state to vif :::::: TO: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> :::::: CC: Kalle Valo <kvalo@qca.qualcomm.com> --- 0-DAY kernel test infrastructure Open Source Technology Center https://lists.01.org/pipermail/kbuild-all Intel Corporation [-- Attachment #2: .config.gz --] [-- Type: application/octet-stream, Size: 26181 bytes --] ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 4/7] nl80211: Add info to scan results to support beacon report 2016-07-05 12:23 ` [PATCH 4/7] nl80211: Add info to scan results to support beacon report Luca Coelho 2016-07-05 13:18 ` kbuild test robot @ 2016-07-05 13:22 ` kbuild test robot 2016-07-05 13:26 ` Coelho, Luciano 2016-07-05 14:10 ` [PATCH v2] " Luca Coelho 3 siblings, 0 replies; 16+ messages in thread From: kbuild test robot @ 2016-07-05 13:22 UTC (permalink / raw) To: Luca Coelho Cc: kbuild-all, johannes, linux-wireless, Avraham Stern, Assaf Krauss, David Spinadel, Luca Coelho [-- Attachment #1: Type: text/plain, Size: 5426 bytes --] Hi, [auto build test ERROR on mac80211-next/master] [also build test ERROR on next-20160705] [cannot apply to v4.7-rc6] [if your patch is applied to the wrong git tree, please drop us a note to help improve the system] url: https://github.com/0day-ci/linux/commits/Luca-Coelho/mac80211-cfg80211-a-bunch-of-patches-from-our-internal-tree/20160705-202748 base: https://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git master config: i386-randconfig-n0-201627 (attached as .config) compiler: gcc-6 (Debian 6.1.1-1) 6.1.1 20160430 reproduce: # save the attached .config to linux build tree make ARCH=i386 All error/warnings (new ones prefixed by >>): drivers/net/wireless/ath/wil6210/main.c: In function 'wil_reset': >> drivers/net/wireless/ath/wil6210/main.c:856:41: warning: passing argument 2 of 'cfg80211_scan_done' makes pointer from integer without a cast [-Wint-conversion] cfg80211_scan_done(wil->scan_request, true); ^~~~ In file included from drivers/net/wireless/ath/wil6210/wil6210.h:22:0, from drivers/net/wireless/ath/wil6210/main.c:21: include/net/cfg80211.h:4102:6: note: expected 'struct cfg80211_scan_info *' but argument is of type 'int' void cfg80211_scan_done(struct cfg80211_scan_request *request, ^~~~~~~~~~~~~~~~~~ drivers/net/wireless/ath/wil6210/main.c: In function '__wil_down': drivers/net/wireless/ath/wil6210/main.c:1055:41: warning: passing argument 2 of 'cfg80211_scan_done' makes pointer from integer without a cast [-Wint-conversion] cfg80211_scan_done(wil->scan_request, true); ^~~~ In file included from drivers/net/wireless/ath/wil6210/wil6210.h:22:0, from drivers/net/wireless/ath/wil6210/main.c:21: include/net/cfg80211.h:4102:6: note: expected 'struct cfg80211_scan_info *' but argument is of type 'int' void cfg80211_scan_done(struct cfg80211_scan_request *request, ^~~~~~~~~~~~~~~~~~ -- drivers/net/wireless/ath/wil6210/cfg80211.c: In function 'wil_cfg80211_stop_p2p_device': >> drivers/net/wireless/ath/wil6210/cfg80211.c:1372:41: warning: passing argument 2 of 'cfg80211_scan_done' makes pointer from integer without a cast [-Wint-conversion] cfg80211_scan_done(wil->scan_request, 1); ^ In file included from drivers/net/wireless/ath/wil6210/wil6210.h:22:0, from drivers/net/wireless/ath/wil6210/cfg80211.c:18: include/net/cfg80211.h:4102:6: note: expected 'struct cfg80211_scan_info *' but argument is of type 'int' void cfg80211_scan_done(struct cfg80211_scan_request *request, ^~~~~~~~~~~~~~~~~~ -- drivers/net/wireless/ath/wil6210/wmi.c: In function 'wmi_evt_scan_complete': >> drivers/net/wireless/ath/wil6210/wmi.c:437:41: error: incompatible type for argument 2 of 'cfg80211_scan_done' cfg80211_scan_done(wil->scan_request, aborted); ^~~~~~~ In file included from drivers/net/wireless/ath/wil6210/wil6210.h:22:0, from drivers/net/wireless/ath/wil6210/wmi.c:21: include/net/cfg80211.h:4102:6: note: expected 'struct cfg80211_scan_info *' but argument is of type 'bool {aka _Bool}' void cfg80211_scan_done(struct cfg80211_scan_request *request, ^~~~~~~~~~~~~~~~~~ -- drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c: In function 'brcmf_notify_escan_complete': >> drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:780:36: error: incompatible type for argument 2 of 'cfg80211_scan_done' cfg80211_scan_done(scan_request, aborted); ^~~~~~~ In file included from drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:23:0: include/net/cfg80211.h:4102:6: note: expected 'struct cfg80211_scan_info *' but argument is of type 'bool {aka _Bool}' void cfg80211_scan_done(struct cfg80211_scan_request *request, ^~~~~~~~~~~~~~~~~~ vim +/cfg80211_scan_done +437 drivers/net/wireless/ath/wil6210/wmi.c 7743882d6 Vladimir Kondratiev 2013-01-28 431 wil_dbg_wmi(wil, "SCAN_COMPLETE(0x%08x)\n", data->status); 2a91d7d06 Vladimir Kondratiev 2014-06-16 432 wil_dbg_misc(wil, "Complete scan_request 0x%p aborted %d\n", 2a91d7d06 Vladimir Kondratiev 2014-06-16 433 wil->scan_request, aborted); 2a91d7d06 Vladimir Kondratiev 2014-06-16 434 047e5d74b Vladimir Kondratiev 2014-05-27 435 del_timer_sync(&wil->scan_timer); 4332cac17 Lior David 2016-03-01 436 mutex_lock(&wil->p2p_wdev_mutex); 2be7d22f0 Vladimir Kondratiev 2012-12-20 @437 cfg80211_scan_done(wil->scan_request, aborted); 4332cac17 Lior David 2016-03-01 438 wil->radio_wdev = wil->wdev; 4332cac17 Lior David 2016-03-01 439 mutex_unlock(&wil->p2p_wdev_mutex); 2be7d22f0 Vladimir Kondratiev 2012-12-20 440 wil->scan_request = NULL; :::::: The code at line 437 was first introduced by commit :::::: 2be7d22f062535de59babdb4b5e9de9ff31e817e wireless: add new wil6210 802.11ad 60GHz driver :::::: TO: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> :::::: CC: John W. Linville <linville@tuxdriver.com> --- 0-DAY kernel test infrastructure Open Source Technology Center https://lists.01.org/pipermail/kbuild-all Intel Corporation [-- Attachment #2: .config.gz --] [-- Type: application/octet-stream, Size: 27244 bytes --] ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 4/7] nl80211: Add info to scan results to support beacon report 2016-07-05 12:23 ` [PATCH 4/7] nl80211: Add info to scan results to support beacon report Luca Coelho 2016-07-05 13:18 ` kbuild test robot 2016-07-05 13:22 ` kbuild test robot @ 2016-07-05 13:26 ` Coelho, Luciano 2016-07-05 14:10 ` [PATCH v2] " Luca Coelho 3 siblings, 0 replies; 16+ messages in thread From: Coelho, Luciano @ 2016-07-05 13:26 UTC (permalink / raw) To: johannes@sipsolutions.net Cc: linux-wireless@vger.kernel.org, Krauss, Assaf, Stern, Avraham, Spinadel, David T24gVHVlLCAyMDE2LTA3LTA1IGF0IDE1OjIzICswMzAwLCBMdWNhIENvZWxobyB3cm90ZToNCj4g RnJvbTogQXZyYWhhbSBTdGVybiA8YXZyYWhhbS5zdGVybkBpbnRlbC5jb20+DQo+IA0KPiBCZWFj b24gcmVwb3J0IHJhZGlvIG1lYXN1cmVtZW50IHJlcXVpcmVzIHJlcG9ydGluZyBvYnNlcnZlZCBC U1NzDQo+IG9uIHRoZSBjaGFubmVscyBzcGVjaWZpZWQgaW4gdGhlIGJlYWNvbiByZXF1ZXN0LiBJ ZiB0aGUgbWVhc3VyZW1lbnQNCj4gbW9kZSBpcyBzZXQgdG8gcGFzc2l2ZSBvciBhY3RpdmUsIGl0 IHJlcXVpcmVzIGFjdHVhbGx5IHBlcmZvcm1pbmcgYQ0KPiBzY2FuIChwYXNzaXZlIG9yIGFjdGl2 ZSwgYWNjb3JkaW5nbHkpLCBhbmQgcmVwb3J0aW5nIHRoZSB0aW1lIHRoYXQNCj4gdGhlIHNjYW4g d2FzIHN0YXJ0ZWQgYW5kIHRoZSB0aW1lIGVhY2ggYmVhY29uL3Byb2JlIHdhcyByZWNlaXZlZA0K PiAoYm90aCBpbiB0ZXJtcyBvZiBUU0Ygb2YgdGhlIEJTUyBvZiB0aGUgcmVxdWVzdGluZyBBUCku IElmIHRoZQ0KPiByZXF1ZXN0IG1vZGUgaXMgdGFibGUsIHRoaXMgaW5mb3JtYXRpb24gaXMgb3B0 aW9uYWwuDQo+IEluIGFkZGl0aW9uLCB0aGUgcmFkaW8gbWVhc3VyZW1lbnQgcmVxdWVzdCBzcGVj aWZpZXMgdGhlIGNoYW5uZWwNCj4gZHdlbGwgdGltZSBmb3IgdGhlIG1lYXN1cmVtZW50Lg0KPiAN Cj4gSW4gb3JkZXIgdG8gdXNlIHNjYW4gZm9yIGJlYWNvbiByZXBvcnQgd2hlbiB0aGUgbW9kZSBp cyBhY3RpdmUgb3INCj4gcGFzc2l2ZSwgYWRkIGEgcGFyYW1ldGVyIHRvIHNjYW4gcmVxdWVzdCB0 aGF0IHNwZWNpZmllcyB0aGUNCj4gY2hhbm5lbCBkd2VsbCB0aW1lLCBhbmQgYWRkIHNjYW4gc3Rh cnQgdGltZSBhbmQgYmVhY29uIHJlY2VpdmVkIHRpbWUNCj4gdG8gc2NhbiByZXN1bHRzIGluZm9y bWF0aW9uLg0KPiANCj4gU3VwcG9ydGluZyBiZWFjb24gcmVwb3J0IGlzIHJlcXVpcmVkIGZvciBN dWx0aSBCYW5kIE9wZXJhdGlvbiAoTUJPKS4NCj4gDQo+IFNpZ25lZC1vZmYtYnk6IEFzc2FmIEty YXVzcyA8YXNzYWYua3JhdXNzQGludGVsLmNvbT4NCj4gU2lnbmVkLW9mZi1ieTogRGF2aWQgU3Bp bmFkZWwgPGRhdmlkLnNwaW5hZGVsQGludGVsLmNvbT4NCj4gU2lnbmVkLW9mZi1ieTogQXZyYWhh bSBTdGVybiA8YXZyYWhhbS5zdGVybkBpbnRlbC5jb20+DQo+IFNpZ25lZC1vZmYtYnk6IEx1Y2Eg Q29lbGhvIDxsdWNpYW5vLmNvZWxob0BpbnRlbC5jb20+DQo+IC0tLQ0KPsKgDQrCoGluY2x1ZGUv bmV0L2NmZzgwMjExLmjCoMKgwqDCoMKgwqDCoHwgNDANCj4gKysrKysrKysrKysrKysrKysrKysr KysrKysrKysrKysrKystLS0tLQ0KPiDCoGluY2x1ZGUvdWFwaS9saW51eC9ubDgwMjExLmggfCA0 Mg0KPiArKysrKysrKysrKysrKysrKysrKysrKysrKysrKysrKysrKysrKysrKysNCj4gwqBuZXQv bWFjODAyMTEvc2Nhbi5jwqDCoMKgwqDCoMKgwqDCoMKgwqB8wqDCoDkgKysrKysrKy0tDQo+IMKg bmV0L3dpcmVsZXNzL2NvcmUuY8KgwqDCoMKgwqDCoMKgwqDCoMKgfMKgwqA0ICsrLS0NCj4gwqBu ZXQvd2lyZWxlc3MvY29yZS5owqDCoMKgwqDCoMKgwqDCoMKgwqB8IDEyICsrKysrKysrKysrKw0K PiDCoG5ldC93aXJlbGVzcy9ubDgwMjExLmPCoMKgwqDCoMKgwqDCoHwgMjcgKysrKysrKysrKysr KysrKysrKysrKysrKysrDQo+IMKgbmV0L3dpcmVsZXNzL3NjYW4uY8KgwqDCoMKgwqDCoMKgwqDC oMKgfCAxOCArKysrKysrKysrKystLS0tLS0NCj4gwqBuZXQvd2lyZWxlc3MvdHJhY2UuaMKgwqDC oMKgwqDCoMKgwqDCoHwgMzMgKysrKysrKysrKysrKysrKysrKysrKysrKy0tLS0tLS0tDQo+IMKg OCBmaWxlcyBjaGFuZ2VkLCAxNjIgaW5zZXJ0aW9ucygrKSwgMjMgZGVsZXRpb25zKC0pDQoNCk91 Y2gsIEkgbWlzc2VkIGNoYW5naW5nIHRoZSBBUElzIG9mIHRoZSBub24tY2ZnODAyMTEgZHJpdmVy cyBoZXJlLg0KwqBJJ2xsIGZpeCBhbmQgcmVzZW5kLg0KDQpUaGFua3MgdG8ga2J1aWxkIHRlc3Qg cm9ib3QgZm9yIHJlcG9ydGluZy4gOikNCg0KLS0NCkx1Y2Eu ^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v2] nl80211: Add info to scan results to support beacon report 2016-07-05 12:23 ` [PATCH 4/7] nl80211: Add info to scan results to support beacon report Luca Coelho ` (2 preceding siblings ...) 2016-07-05 13:26 ` Coelho, Luciano @ 2016-07-05 14:10 ` Luca Coelho 2016-07-05 14:12 ` Luca Coelho 3 siblings, 1 reply; 16+ messages in thread From: Luca Coelho @ 2016-07-05 14:10 UTC (permalink / raw) To: johannes Cc: linux-wireless, Avraham Stern, Assaf Krauss, David Spinadel, Luca Coelho From: Avraham Stern <avraham.stern@intel.com> Beacon report radio measurement requires reporting observed BSSs on the channels specified in the beacon request. If the measurement mode is set to passive or active, it requires actually performing a scan (passive or active, accordingly), and reporting the time that the scan was started and the time each beacon/probe was received (both in terms of TSF of the BSS of the requesting AP). If the request mode is table, this information is optional. In addition, the radio measurement request specifies the channel dwell time for the measurement. In order to use scan for beacon report when the mode is active or passive, add a parameter to scan request that specifies the channel dwell time, and add scan start time and beacon received time to scan results information. Supporting beacon report is required for Multi Band Operation (MBO). Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> --- drivers/net/wireless/ath/ath6kl/cfg80211.c | 17 +++++++-- drivers/net/wireless/ath/wil6210/cfg80211.c | 6 +++- drivers/net/wireless/ath/wil6210/main.c | 12 +++++-- drivers/net/wireless/ath/wil6210/p2p.c | 6 +++- drivers/net/wireless/ath/wil6210/wmi.c | 8 +++-- .../broadcom/brcm80211/brcmfmac/cfg80211.c | 6 +++- drivers/net/wireless/intersil/orinoco/scan.c | 12 +++++-- drivers/net/wireless/marvell/libertas/cfg.c | 11 ++++-- drivers/net/wireless/marvell/mwifiex/cmdevt.c | 12 +++++-- drivers/net/wireless/marvell/mwifiex/main.c | 6 +++- drivers/net/wireless/marvell/mwifiex/scan.c | 12 +++++-- drivers/net/wireless/rndis_wlan.c | 10 ++++-- drivers/staging/rtl8723au/os_dep/ioctl_cfg80211.c | 11 ++++-- drivers/staging/wilc1000/wilc_wfi_cfgoperations.c | 12 +++++-- drivers/staging/wlan-ng/cfg80211.c | 5 ++- include/net/cfg80211.h | 40 ++++++++++++++++++--- include/uapi/linux/nl80211.h | 42 ++++++++++++++++++++++ net/mac80211/scan.c | 9 +++-- net/wireless/core.c | 4 +-- net/wireless/core.h | 12 +++++++ net/wireless/nl80211.c | 27 ++++++++++++++ net/wireless/scan.c | 18 ++++++---- net/wireless/trace.h | 33 ++++++++++++----- 23 files changed, 279 insertions(+), 52 deletions(-) diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index 4e11ba0..ef5b40e 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -859,7 +859,11 @@ void ath6kl_cfg80211_disconnect_event(struct ath6kl_vif *vif, u8 reason, struct ath6kl *ar = vif->ar; if (vif->scan_req) { - cfg80211_scan_done(vif->scan_req, true); + struct cfg80211_scan_info info = { + .aborted = true, + }; + + cfg80211_scan_done(vif->scan_req, &info); vif->scan_req = NULL; } @@ -1069,6 +1073,9 @@ static int ath6kl_cfg80211_scan(struct wiphy *wiphy, void ath6kl_cfg80211_scan_complete_event(struct ath6kl_vif *vif, bool aborted) { struct ath6kl *ar = vif->ar; + struct cfg80211_scan_info info = { + .aborted = aborted, + }; int i; ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s: status%s\n", __func__, @@ -1089,7 +1096,7 @@ void ath6kl_cfg80211_scan_complete_event(struct ath6kl_vif *vif, bool aborted) } out: - cfg80211_scan_done(vif->scan_req, aborted); + cfg80211_scan_done(vif->scan_req, &info); vif->scan_req = NULL; } @@ -3614,7 +3621,11 @@ void ath6kl_cfg80211_vif_stop(struct ath6kl_vif *vif, bool wmi_ready) } if (vif->scan_req) { - cfg80211_scan_done(vif->scan_req, true); + struct cfg80211_scan_info info = { + .aborted = true, + }; + + cfg80211_scan_done(vif->scan_req, &info); vif->scan_req = NULL; } diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c index 62bf933..f0e1175 100644 --- a/drivers/net/wireless/ath/wil6210/cfg80211.c +++ b/drivers/net/wireless/ath/wil6210/cfg80211.c @@ -1369,7 +1369,11 @@ static void wil_cfg80211_stop_p2p_device(struct wiphy *wiphy, mutex_lock(&wil->mutex); started = wil_p2p_stop_discovery(wil); if (started && wil->scan_request) { - cfg80211_scan_done(wil->scan_request, 1); + struct cfg80211_scan_info info = { + .aborted = true, + }; + + cfg80211_scan_done(wil->scan_request, &info); wil->scan_request = NULL; wil->radio_wdev = wil->wdev; } diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c index 8e31d75..4bc92e5 100644 --- a/drivers/net/wireless/ath/wil6210/main.c +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -850,10 +850,14 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw) mutex_unlock(&wil->wmi_mutex); if (wil->scan_request) { + struct cfg80211_scan_info info = { + .aborted = true, + }; + wil_dbg_misc(wil, "Abort scan_request 0x%p\n", wil->scan_request); del_timer_sync(&wil->scan_timer); - cfg80211_scan_done(wil->scan_request, true); + cfg80211_scan_done(wil->scan_request, &info); wil->scan_request = NULL; } @@ -1049,10 +1053,14 @@ int __wil_down(struct wil6210_priv *wil) (void)wil_p2p_stop_discovery(wil); if (wil->scan_request) { + struct cfg80211_scan_info info = { + .aborted = true, + }; + wil_dbg_misc(wil, "Abort scan_request 0x%p\n", wil->scan_request); del_timer_sync(&wil->scan_timer); - cfg80211_scan_done(wil->scan_request, true); + cfg80211_scan_done(wil->scan_request, &info); wil->scan_request = NULL; } diff --git a/drivers/net/wireless/ath/wil6210/p2p.c b/drivers/net/wireless/ath/wil6210/p2p.c index 213b825..e0f8aa0 100644 --- a/drivers/net/wireless/ath/wil6210/p2p.c +++ b/drivers/net/wireless/ath/wil6210/p2p.c @@ -252,8 +252,12 @@ void wil_p2p_search_expired(struct work_struct *work) mutex_unlock(&wil->mutex); if (started) { + struct cfg80211_scan_info info = { + .aborted = false, + }; + mutex_lock(&wil->p2p_wdev_mutex); - cfg80211_scan_done(wil->scan_request, 0); + cfg80211_scan_done(wil->scan_request, &info); wil->scan_request = NULL; wil->radio_wdev = wil->wdev; mutex_unlock(&wil->p2p_wdev_mutex); diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c index b80c5d8..4d92541 100644 --- a/drivers/net/wireless/ath/wil6210/wmi.c +++ b/drivers/net/wireless/ath/wil6210/wmi.c @@ -426,15 +426,17 @@ static void wmi_evt_scan_complete(struct wil6210_priv *wil, int id, { if (wil->scan_request) { struct wmi_scan_complete_event *data = d; - bool aborted = (data->status != WMI_SCAN_SUCCESS); + struct cfg80211_scan_info info = { + .aborted = (data->status != WMI_SCAN_SUCCESS), + }; wil_dbg_wmi(wil, "SCAN_COMPLETE(0x%08x)\n", data->status); wil_dbg_misc(wil, "Complete scan_request 0x%p aborted %d\n", - wil->scan_request, aborted); + wil->scan_request, info.aborted); del_timer_sync(&wil->scan_timer); mutex_lock(&wil->p2p_wdev_mutex); - cfg80211_scan_done(wil->scan_request, aborted); + cfg80211_scan_done(wil->scan_request, &info); wil->radio_wdev = wil->wdev; mutex_unlock(&wil->p2p_wdev_mutex); wil->scan_request = NULL; diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c index 264bd63..afe2b20 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c @@ -775,9 +775,13 @@ s32 brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg, if (!aborted) cfg80211_sched_scan_results(cfg_to_wiphy(cfg)); } else if (scan_request) { + struct cfg80211_scan_info info = { + .aborted = aborted, + }; + brcmf_dbg(SCAN, "ESCAN Completed scan: %s\n", aborted ? "Aborted" : "Done"); - cfg80211_scan_done(scan_request, aborted); + cfg80211_scan_done(scan_request, &info); } if (!test_and_clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) brcmf_dbg(SCAN, "Scan complete, probably P2P scan\n"); diff --git a/drivers/net/wireless/intersil/orinoco/scan.c b/drivers/net/wireless/intersil/orinoco/scan.c index d0ceb06..6d1d084 100644 --- a/drivers/net/wireless/intersil/orinoco/scan.c +++ b/drivers/net/wireless/intersil/orinoco/scan.c @@ -237,7 +237,11 @@ void orinoco_add_hostscan_results(struct orinoco_private *priv, scan_abort: if (priv->scan_request) { - cfg80211_scan_done(priv->scan_request, abort); + struct cfg80211_scan_info info = { + .aborted = abort, + }; + + cfg80211_scan_done(priv->scan_request, &info); priv->scan_request = NULL; } } @@ -245,7 +249,11 @@ void orinoco_add_hostscan_results(struct orinoco_private *priv, void orinoco_scan_done(struct orinoco_private *priv, bool abort) { if (priv->scan_request) { - cfg80211_scan_done(priv->scan_request, abort); + struct cfg80211_scan_info info = { + .aborted = abort, + }; + + cfg80211_scan_done(priv->scan_request, &info); priv->scan_request = NULL; } } diff --git a/drivers/net/wireless/marvell/libertas/cfg.c b/drivers/net/wireless/marvell/libertas/cfg.c index 776b44b..ea48024 100644 --- a/drivers/net/wireless/marvell/libertas/cfg.c +++ b/drivers/net/wireless/marvell/libertas/cfg.c @@ -796,10 +796,15 @@ void lbs_scan_done(struct lbs_private *priv) { WARN_ON(!priv->scan_req); - if (priv->internal_scan) + if (priv->internal_scan) { kfree(priv->scan_req); - else - cfg80211_scan_done(priv->scan_req, false); + } else { + struct cfg80211_scan_info info = { + .aborted = false, + }; + + cfg80211_scan_done(priv->scan_req, &info); + } priv->scan_req = NULL; } diff --git a/drivers/net/wireless/marvell/mwifiex/cmdevt.c b/drivers/net/wireless/marvell/mwifiex/cmdevt.c index 6bc2011..e7a2144 100644 --- a/drivers/net/wireless/marvell/mwifiex/cmdevt.c +++ b/drivers/net/wireless/marvell/mwifiex/cmdevt.c @@ -1057,8 +1057,12 @@ mwifiex_cancel_all_pending_cmd(struct mwifiex_adapter *adapter) if (!priv) continue; if (priv->scan_request) { + struct cfg80211_scan_info info = { + .aborted = true, + }; + mwifiex_dbg(adapter, WARN, "info: aborting scan\n"); - cfg80211_scan_done(priv->scan_request, 1); + cfg80211_scan_done(priv->scan_request, &info); priv->scan_request = NULL; } } @@ -1112,8 +1116,12 @@ mwifiex_cancel_pending_ioctl(struct mwifiex_adapter *adapter) if (!priv) continue; if (priv->scan_request) { + struct cfg80211_scan_info info = { + .aborted = true, + }; + mwifiex_dbg(adapter, WARN, "info: aborting scan\n"); - cfg80211_scan_done(priv->scan_request, 1); + cfg80211_scan_done(priv->scan_request, &info); priv->scan_request = NULL; } } diff --git a/drivers/net/wireless/marvell/mwifiex/main.c b/drivers/net/wireless/marvell/mwifiex/main.c index 0e280f8..db4925d 100644 --- a/drivers/net/wireless/marvell/mwifiex/main.c +++ b/drivers/net/wireless/marvell/mwifiex/main.c @@ -697,9 +697,13 @@ mwifiex_close(struct net_device *dev) struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); if (priv->scan_request) { + struct cfg80211_scan_info info = { + .aborted = true, + }; + mwifiex_dbg(priv->adapter, INFO, "aborting scan on ndo_stop\n"); - cfg80211_scan_done(priv->scan_request, 1); + cfg80211_scan_done(priv->scan_request, &info); priv->scan_request = NULL; priv->scan_aborting = true; } diff --git a/drivers/net/wireless/marvell/mwifiex/scan.c b/drivers/net/wireless/marvell/mwifiex/scan.c index bc5e52c..fdd7491 100644 --- a/drivers/net/wireless/marvell/mwifiex/scan.c +++ b/drivers/net/wireless/marvell/mwifiex/scan.c @@ -1956,9 +1956,13 @@ static void mwifiex_check_next_scan_command(struct mwifiex_private *priv) mwifiex_complete_scan(priv); if (priv->scan_request) { + struct cfg80211_scan_info info = { + .aborted = false, + }; + mwifiex_dbg(adapter, INFO, "info: notifying scan done\n"); - cfg80211_scan_done(priv->scan_request, 0); + cfg80211_scan_done(priv->scan_request, &info); priv->scan_request = NULL; } else { priv->scan_aborting = false; @@ -1977,9 +1981,13 @@ static void mwifiex_check_next_scan_command(struct mwifiex_private *priv) if (!adapter->active_scan_triggered) { if (priv->scan_request) { + struct cfg80211_scan_info info = { + .aborted = true, + }; + mwifiex_dbg(adapter, INFO, "info: aborting scan\n"); - cfg80211_scan_done(priv->scan_request, 1); + cfg80211_scan_done(priv->scan_request, &info); priv->scan_request = NULL; } else { priv->scan_aborting = false; diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index 569918c..603c904 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -2134,6 +2134,7 @@ static void rndis_get_scan_results(struct work_struct *work) struct rndis_wlan_private *priv = container_of(work, struct rndis_wlan_private, scan_work.work); struct usbnet *usbdev = priv->usbdev; + struct cfg80211_scan_info info = {}; int ret; netdev_dbg(usbdev->net, "get_scan_results\n"); @@ -2143,7 +2144,8 @@ static void rndis_get_scan_results(struct work_struct *work) ret = rndis_check_bssid_list(usbdev, NULL, NULL); - cfg80211_scan_done(priv->scan_request, ret < 0); + info.aborted = ret < 0; + cfg80211_scan_done(priv->scan_request, &info); priv->scan_request = NULL; } @@ -3574,7 +3576,11 @@ static int rndis_wlan_stop(struct usbnet *usbdev) flush_workqueue(priv->workqueue); if (priv->scan_request) { - cfg80211_scan_done(priv->scan_request, true); + struct cfg80211_scan_info info = { + .aborted = true, + }; + + cfg80211_scan_done(priv->scan_request, &info); priv->scan_request = NULL; } diff --git a/drivers/staging/rtl8723au/os_dep/ioctl_cfg80211.c b/drivers/staging/rtl8723au/os_dep/ioctl_cfg80211.c index 0da559d..d0ba377 100644 --- a/drivers/staging/rtl8723au/os_dep/ioctl_cfg80211.c +++ b/drivers/staging/rtl8723au/os_dep/ioctl_cfg80211.c @@ -1256,10 +1256,15 @@ void rtw_cfg80211_indicate_scan_done(struct rtw_wdev_priv *pwdev_priv, DBG_8723A("%s with scan req\n", __func__); if (pwdev_priv->scan_request->wiphy != - pwdev_priv->rtw_wdev->wiphy) + pwdev_priv->rtw_wdev->wiphy) { DBG_8723A("error wiphy compare\n"); - else - cfg80211_scan_done(pwdev_priv->scan_request, aborted); + } else { + struct cfg80211_scan_info info = { + .aborted = aborted, + }; + + cfg80211_scan_done(pwdev_priv->scan_request, &info); + } pwdev_priv->scan_request = NULL; } else { diff --git a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c index 51aff4f..a0d8e22 100644 --- a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c +++ b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c @@ -454,7 +454,11 @@ static void CfgScanResult(enum scan_event scan_event, mutex_lock(&priv->scan_req_lock); if (priv->pstrScanReq) { - cfg80211_scan_done(priv->pstrScanReq, false); + struct cfg80211_scan_info info = { + .aborted = false, + }; + + cfg80211_scan_done(priv->pstrScanReq, &info); priv->u32RcvdChCount = 0; priv->bCfgScanning = false; priv->pstrScanReq = NULL; @@ -464,10 +468,14 @@ static void CfgScanResult(enum scan_event scan_event, mutex_lock(&priv->scan_req_lock); if (priv->pstrScanReq) { + struct cfg80211_scan_info info = { + .aborted = false, + }; + update_scan_time(); refresh_scan(priv, 1, false); - cfg80211_scan_done(priv->pstrScanReq, false); + cfg80211_scan_done(priv->pstrScanReq, &info); priv->bCfgScanning = false; priv->pstrScanReq = NULL; } diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c index a6e6fb9..f46dfe6 100644 --- a/drivers/staging/wlan-ng/cfg80211.c +++ b/drivers/staging/wlan-ng/cfg80211.c @@ -338,6 +338,8 @@ static int prism2_scan(struct wiphy *wiphy, struct p80211msg_dot11req_scan msg1; struct p80211msg_dot11req_scan_results msg2; struct cfg80211_bss *bss; + struct cfg80211_scan_info info = {}; + int result; int err = 0; int numbss = 0; @@ -440,7 +442,8 @@ static int prism2_scan(struct wiphy *wiphy, err = prism2_result2err(msg2.resultcode.data); exit: - cfg80211_scan_done(request, err ? 1 : 0); + info.aborted = !!(err); + cfg80211_scan_done(request, &info); priv->scan_request = NULL; return err; } diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index fa4f0f7..e2658e3 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1424,6 +1424,21 @@ struct cfg80211_ssid { }; /** + * struct cfg80211_scan_info - information about completed scan + * @scan_start_tsf: scan start time in terms of the TSF of the BSS that the + * wireless device that requested the scan is connected to. If this + * information is not available, this field is left zero. + * @tsf_bssid: the BSSID according to which %scan_start_tsf is set. + * @aborted: set to true if the scan was aborted for any reason, + * userspace will be notified of that + */ +struct cfg80211_scan_info { + u64 scan_start_tsf; + u8 tsf_bssid[ETH_ALEN] __aligned(2); + bool aborted; +}; + +/** * struct cfg80211_scan_request - scan request description * * @ssids: SSIDs to scan for (active scan only) @@ -1433,12 +1448,17 @@ struct cfg80211_ssid { * @scan_width: channel width for scanning * @ie: optional information element(s) to add into Probe Request or %NULL * @ie_len: length of ie in octets + * @duration: how long to listen on each channel, in TUs. If + * %duration_mandatory is not set, this is the maximum dwell time and + * the actual dwell time may be shorter. + * @duration_mandatory: if set, the scan duration must be as specified by the + * %duration field. * @flags: bit field of flags controlling operation * @rates: bitmap of rates to advertise for each band * @wiphy: the wiphy this was for * @scan_start: time (in jiffies) when the scan started * @wdev: the wireless device to scan for - * @aborted: (internal) scan request was notified as aborted + * @info: (internal) information about completed scan * @notified: (internal) scan request was notified as done or aborted * @no_cck: used to send probe requests at non CCK rate in 2GHz band * @mac_addr: MAC address used with randomisation @@ -1454,6 +1474,8 @@ struct cfg80211_scan_request { enum nl80211_bss_scan_width scan_width; const u8 *ie; size_t ie_len; + u16 duration; + bool duration_mandatory; u32 flags; u32 rates[NUM_NL80211_BANDS]; @@ -1467,7 +1489,8 @@ struct cfg80211_scan_request { /* internal */ struct wiphy *wiphy; unsigned long scan_start; - bool aborted, notified; + struct cfg80211_scan_info info; + bool notified; bool no_cck; /* keep last */ @@ -1600,12 +1623,19 @@ enum cfg80211_signal_type { * buffered on the device) and be accurate to about 10ms. * If the frame isn't buffered, just passing the return value of * ktime_get_boot_ns() is likely appropriate. + * @parent_tsf: the time at the start of reception of the first octet of the + * timestamp field of the frame. The time is the TSF of the BSS specified + * by %parent_bssid. + * @parent_bssid: the BSS according to which %parent_tsf is set. This is set to + * the BSS that requested the scan in which the beacon/probe was received. */ struct cfg80211_inform_bss { struct ieee80211_channel *chan; enum nl80211_bss_scan_width scan_width; s32 signal; u64 boottime_ns; + u64 parent_tsf; + u8 parent_bssid[ETH_ALEN] __aligned(2); }; /** @@ -4067,10 +4097,10 @@ const char *reg_initiator_name(enum nl80211_reg_initiator initiator); * cfg80211_scan_done - notify that scan finished * * @request: the corresponding scan request - * @aborted: set to true if the scan was aborted for any reason, - * userspace will be notified of that + * @info: information about the completed scan */ -void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted); +void cfg80211_scan_done(struct cfg80211_scan_request *request, + struct cfg80211_scan_info *info); /** * cfg80211_sched_scan_results - notify that new scan results are available diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 1d7da78..b39ccab 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1848,6 +1848,22 @@ enum nl80211_commands { * to turn that feature off set an invalid mac address * (e.g. FF:FF:FF:FF:FF:FF) * + * @NL80211_ATTR_SCAN_START_TIME_TSF: The time at which the scan was actually + * started (u64). The time is the TSF of the BSS the interface that + * requested the scan is connected to (if available, otherwise this + * attribute must not be included). + * @NL80211_ATTR_SCAN_START_TIME_TSF_BSSID: The BSS according to which + * %NL80211_ATTR_SCAN_START_TIME_TSF is set. + * @NL80211_ATTR_MEASUREMENT_DURATION: measurement duration in TUs (u16). If + * %NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY is not set, this is the + * maximum measurement duration allowed. This attribute is used with + * measurement requests. It can also be used with %NL80211_CMD_TRIGGER_SCAN + * if the scan is used for beacon report radio measurement. + * @NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY: flag attribute that indicates + * that the duration specified with %NL80211_ATTR_MEASUREMENT_DURATION is + * mandatory. If this flag is not set, the duration is the maximum duration + * and the actual measurement duration may be shorter. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -2235,6 +2251,11 @@ enum nl80211_attrs { NL80211_ATTR_MU_MIMO_GROUP_DATA, NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR, + NL80211_ATTR_SCAN_START_TIME_TSF, + NL80211_ATTR_SCAN_START_TIME_TSF_BSSID, + NL80211_ATTR_MEASUREMENT_DURATION, + NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3496,6 +3517,12 @@ enum nl80211_bss_scan_width { * was last updated by a received frame. The value is expected to be * accurate to about 10ms. (u64, nanoseconds) * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment + * @NL80211_BSS_PARENT_TSF: the time at the start of reception of the first + * octet of the timestamp field of the last beacon/probe received for + * this BSS. The time is the TSF of the BSS specified by + * @NL80211_BSS_PARENT_BSSID. (u64). + * @NL80211_BSS_PARENT_BSSID: the BSS according to which @NL80211_BSS_PARENT_TSF + * is set. * @__NL80211_BSS_AFTER_LAST: internal * @NL80211_BSS_MAX: highest BSS attribute */ @@ -3517,6 +3544,8 @@ enum nl80211_bss { NL80211_BSS_PRESP_DATA, NL80211_BSS_LAST_SEEN_BOOTTIME, NL80211_BSS_PAD, + NL80211_BSS_PARENT_TSF, + NL80211_BSS_PARENT_BSSID, /* keep last */ __NL80211_BSS_AFTER_LAST, @@ -4507,6 +4536,16 @@ enum nl80211_feature_flags { * %NL80211_ATTR_MU_MIMO_GROUP_DATA attribute, * or can be configured to follow a station by configuring the * %NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR attribute. + * @NL80211_EXT_FEATURE_SCAN_START_TIME: This driver includes the actual + * time the scan started in scan results event. The time is the TSF of + * the BSS that the interface that requested the scan is connected to + * (if available). + * @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the + * time the last beacon/probe was received. The time is the TSF of the + * BSS that the interface that requested the scan is connected to + * (if available). + * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of + * channel dwell time. * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. @@ -4515,6 +4554,9 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_VHT_IBSS, NL80211_EXT_FEATURE_RRM, NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER, + NL80211_EXT_FEATURE_SCAN_START_TIME, + NL80211_EXT_FEATURE_BSS_PARENT_TSF, + NL80211_EXT_FEATURE_SET_SCAN_DWELL, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index f9648ef..4ec1c52 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -353,8 +353,13 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) scan_req = rcu_dereference_protected(local->scan_req, lockdep_is_held(&local->mtx)); - if (scan_req != local->int_scan_req) - cfg80211_scan_done(scan_req, aborted); + if (scan_req != local->int_scan_req) { + struct cfg80211_scan_info info = { + .aborted = aborted, + }; + + cfg80211_scan_done(scan_req, &info); + } RCU_INIT_POINTER(local->scan_req, NULL); scan_sdata = rcu_dereference_protected(local->scan_sdata, diff --git a/net/wireless/core.c b/net/wireless/core.c index 39d9abd..7645e97 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -220,7 +220,7 @@ void cfg80211_stop_p2p_device(struct cfg80211_registered_device *rdev, if (rdev->scan_req && rdev->scan_req->wdev == wdev) { if (WARN_ON(!rdev->scan_req->notified)) - rdev->scan_req->aborted = true; + rdev->scan_req->info.aborted = true; ___cfg80211_scan_done(rdev, false); } } @@ -1087,7 +1087,7 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb, cfg80211_update_iface_num(rdev, wdev->iftype, -1); if (rdev->scan_req && rdev->scan_req->wdev == wdev) { if (WARN_ON(!rdev->scan_req->notified)) - rdev->scan_req->aborted = true; + rdev->scan_req->info.aborted = true; ___cfg80211_scan_done(rdev, false); } diff --git a/net/wireless/core.h b/net/wireless/core.h index a4d547f..eee9144 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -141,6 +141,18 @@ struct cfg80211_internal_bss { unsigned long refcount; atomic_t hold; + /* time at the start of the reception of the first octet of the + * timestamp field of the last beacon/probe received for this BSS. + * The time is the TSF of the BSS specified by %parent_bssid. + */ + u64 parent_tsf; + + /* the BSS according to which %parent_tsf is set. This is set to + * the BSS that the interface that requested the scan was connected to + * when the beacon/probe was received. + */ + u8 parent_bssid[ETH_ALEN] __aligned(2); + /* must be last because of priv member */ struct cfg80211_bss pub; }; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 447026f..c53b546 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -6223,6 +6223,19 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info) } } + if (info->attrs[NL80211_ATTR_MEASUREMENT_DURATION]) { + if (!wiphy_ext_feature_isset(wiphy, + NL80211_EXT_FEATURE_SET_SCAN_DWELL)) { + err = -EOPNOTSUPP; + goto out_free; + } + + request->duration = + nla_get_u16(info->attrs[NL80211_ATTR_MEASUREMENT_DURATION]); + request->duration_mandatory = + nla_get_flag(info->attrs[NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY]); + } + if (info->attrs[NL80211_ATTR_SCAN_FLAGS]) { request->flags = nla_get_u32( info->attrs[NL80211_ATTR_SCAN_FLAGS]); @@ -7056,6 +7069,13 @@ static int nl80211_send_bss(struct sk_buff *msg, struct netlink_callback *cb, jiffies_to_msecs(jiffies - intbss->ts))) goto nla_put_failure; + if (intbss->parent_tsf && + (nla_put_u64_64bit(msg, NL80211_BSS_PARENT_TSF, + intbss->parent_tsf, NL80211_BSS_PAD) || + nla_put(msg, NL80211_BSS_PARENT_BSSID, ETH_ALEN, + intbss->parent_bssid))) + goto nla_put_failure; + if (intbss->ts_boottime && nla_put_u64_64bit(msg, NL80211_BSS_LAST_SEEN_BOOTTIME, intbss->ts_boottime, NL80211_BSS_PAD)) @@ -11829,6 +11849,13 @@ static int nl80211_add_scan_req(struct sk_buff *msg, nla_put_u32(msg, NL80211_ATTR_SCAN_FLAGS, req->flags)) goto nla_put_failure; + if (req->info.scan_start_tsf && + (nla_put_u64_64bit(msg, NL80211_ATTR_SCAN_START_TIME_TSF, + req->info.scan_start_tsf, NL80211_BSS_PAD) || + nla_put(msg, NL80211_ATTR_SCAN_START_TIME_TSF_BSSID, ETH_ALEN, + req->info.tsf_bssid))) + goto nla_put_failure; + return 0; nla_put_failure: return -ENOBUFS; diff --git a/net/wireless/scan.c b/net/wireless/scan.c index ef2955c..0358e12 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -3,6 +3,7 @@ * * Copyright 2008 Johannes Berg <johannes@sipsolutions.net> * Copyright 2013-2014 Intel Mobile Communications GmbH + * Copyright 2016 Intel Deutschland GmbH */ #include <linux/kernel.h> #include <linux/slab.h> @@ -194,7 +195,7 @@ void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev, if (wdev->netdev) cfg80211_sme_scan_done(wdev->netdev); - if (!request->aborted && + if (!request->info.aborted && request->flags & NL80211_SCAN_FLAG_FLUSH) { /* flush entries from previous scans */ spin_lock_bh(&rdev->bss_lock); @@ -202,10 +203,10 @@ void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev, spin_unlock_bh(&rdev->bss_lock); } - msg = nl80211_build_scan_msg(rdev, wdev, request->aborted); + msg = nl80211_build_scan_msg(rdev, wdev, request->info.aborted); #ifdef CONFIG_CFG80211_WEXT - if (wdev->netdev && !request->aborted) { + if (wdev->netdev && !request->info.aborted) { memset(&wrqu, 0, sizeof(wrqu)); wireless_send_event(wdev->netdev, SIOCGIWSCAN, &wrqu, NULL); @@ -236,12 +237,13 @@ void __cfg80211_scan_done(struct work_struct *wk) rtnl_unlock(); } -void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted) +void cfg80211_scan_done(struct cfg80211_scan_request *request, + struct cfg80211_scan_info *info) { - trace_cfg80211_scan_done(request, aborted); + trace_cfg80211_scan_done(request, info); WARN_ON(request != wiphy_to_rdev(request->wiphy)->scan_req); - request->aborted = aborted; + request->info = *info; request->notified = true; queue_work(cfg80211_wq, &wiphy_to_rdev(request->wiphy)->scan_done_wk); } @@ -843,6 +845,8 @@ cfg80211_bss_update(struct cfg80211_registered_device *rdev, found->pub.capability = tmp->pub.capability; found->ts = tmp->ts; found->ts_boottime = tmp->ts_boottime; + found->parent_tsf = tmp->parent_tsf; + ether_addr_copy(found->parent_bssid, tmp->parent_bssid); } else { struct cfg80211_internal_bss *new; struct cfg80211_internal_bss *hidden; @@ -1086,6 +1090,8 @@ cfg80211_inform_bss_frame_data(struct wiphy *wiphy, tmp.pub.beacon_interval = le16_to_cpu(mgmt->u.probe_resp.beacon_int); tmp.pub.capability = le16_to_cpu(mgmt->u.probe_resp.capab_info); tmp.ts_boottime = data->boottime_ns; + tmp.parent_tsf = data->parent_tsf; + ether_addr_copy(tmp.parent_bssid, data->parent_bssid); signal_valid = abs(data->chan->center_freq - channel->center_freq) <= wiphy->max_adj_channel_rssi_comp; diff --git a/net/wireless/trace.h b/net/wireless/trace.h index 3c1091a..72b5255 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -2642,8 +2642,9 @@ TRACE_EVENT(cfg80211_tdls_oper_request, ); TRACE_EVENT(cfg80211_scan_done, - TP_PROTO(struct cfg80211_scan_request *request, bool aborted), - TP_ARGS(request, aborted), + TP_PROTO(struct cfg80211_scan_request *request, + struct cfg80211_scan_info *info), + TP_ARGS(request, info), TP_STRUCT__entry( __field(u32, n_channels) __dynamic_array(u8, ie, request ? request->ie_len : 0) @@ -2652,6 +2653,8 @@ TRACE_EVENT(cfg80211_scan_done, MAC_ENTRY(wiphy_mac) __field(bool, no_cck) __field(bool, aborted) + __field(u64, scan_start_tsf) + MAC_ENTRY(tsf_bssid) ), TP_fast_assign( if (request) { @@ -2666,9 +2669,16 @@ TRACE_EVENT(cfg80211_scan_done, request->wiphy->perm_addr); __entry->no_cck = request->no_cck; } - __entry->aborted = aborted; + if (info) { + __entry->aborted = info->aborted; + __entry->scan_start_tsf = info->scan_start_tsf; + MAC_ASSIGN(tsf_bssid, info->tsf_bssid); + } ), - TP_printk("aborted: %s", BOOL_TO_STR(__entry->aborted)) + TP_printk("aborted: %s, scan start (TSF): %llu, tsf_bssid: " MAC_PR_FMT, + BOOL_TO_STR(__entry->aborted), + (unsigned long long)__entry->scan_start_tsf, + MAC_PR_ARG(tsf_bssid)) ); DEFINE_EVENT(wiphy_only_evt, cfg80211_sched_scan_results, @@ -2721,6 +2731,8 @@ TRACE_EVENT(cfg80211_inform_bss_frame, __dynamic_array(u8, mgmt, len) __field(s32, signal) __field(u64, ts_boottime) + __field(u64, parent_tsf) + MAC_ENTRY(parent_bssid) ), TP_fast_assign( WIPHY_ASSIGN; @@ -2730,10 +2742,15 @@ TRACE_EVENT(cfg80211_inform_bss_frame, memcpy(__get_dynamic_array(mgmt), mgmt, len); __entry->signal = data->signal; __entry->ts_boottime = data->boottime_ns; - ), - TP_printk(WIPHY_PR_FMT ", " CHAN_PR_FMT "(scan_width: %d) signal: %d, tsb:%llu", - WIPHY_PR_ARG, CHAN_PR_ARG, __entry->scan_width, - __entry->signal, (unsigned long long)__entry->ts_boottime) + __entry->parent_tsf = data->parent_tsf; + MAC_ASSIGN(parent_bssid, data->parent_bssid); + ), + TP_printk(WIPHY_PR_FMT ", " CHAN_PR_FMT + "(scan_width: %d) signal: %d, tsb:%llu, detect_tsf:%llu, tsf_bssid: " + MAC_PR_FMT, WIPHY_PR_ARG, CHAN_PR_ARG, __entry->scan_width, + __entry->signal, (unsigned long long)__entry->ts_boottime, + (unsigned long long)__entry->parent_tsf, + MAC_PR_ARG(parent_bssid)) ); DECLARE_EVENT_CLASS(cfg80211_bss_evt, -- 2.8.1 ^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH v2] nl80211: Add info to scan results to support beacon report 2016-07-05 14:10 ` [PATCH v2] " Luca Coelho @ 2016-07-05 14:12 ` Luca Coelho 0 siblings, 0 replies; 16+ messages in thread From: Luca Coelho @ 2016-07-05 14:12 UTC (permalink / raw) To: johannes; +Cc: linux-wireless, Avraham Stern, Assaf Krauss, David Spinadel On Tue, 2016-07-05 at 17:10 +0300, Luca Coelho wrote: > From: Avraham Stern <avraham.stern@intel.com> > > Beacon report radio measurement requires reporting observed BSSs > on the channels specified in the beacon request. If the measurement > mode is set to passive or active, it requires actually performing a > scan (passive or active, accordingly), and reporting the time that > the scan was started and the time each beacon/probe was received > (both in terms of TSF of the BSS of the requesting AP). If the > request mode is table, this information is optional. > In addition, the radio measurement request specifies the channel > dwell time for the measurement. > > In order to use scan for beacon report when the mode is active or > passive, add a parameter to scan request that specifies the > channel dwell time, and add scan start time and beacon received time > to scan results information. > > Supporting beacon report is required for Multi Band Operation (MBO). > > Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> > Signed-off-by: David Spinadel <david.spinadel@intel.com> > Signed-off-by: Avraham Stern <avraham.stern@intel.com> > Signed-off-by: Luca Coelho <luciano.coelho@intel.com> > --- Forgot to say, the non-mac80211 driver changes are just compiled- tested. -- Luca. ^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 5/7] mac80211: Add support for beacon report radio measurement 2016-07-05 12:23 [PATCH 0/7] mac80211/cfg80211: a bunch of patches from our internal tree Luca Coelho ` (3 preceding siblings ...) 2016-07-05 12:23 ` [PATCH 4/7] nl80211: Add info to scan results to support beacon report Luca Coelho @ 2016-07-05 12:23 ` Luca Coelho 2016-07-05 12:23 ` [PATCH 6/7] mac80211: report failure to start (partial) scan as scan abort Luca Coelho ` (2 subsequent siblings) 7 siblings, 0 replies; 16+ messages in thread From: Luca Coelho @ 2016-07-05 12:23 UTC (permalink / raw) To: johannes; +Cc: linux-wireless, Avraham Stern, Assaf Krauss, Luca Coelho From: Avraham Stern <avraham.stern@intel.com> Add the following to support beacon report radio measurement with the measurement mode field set to passive or active: 1. Propagate the required scan duration to the device 2. Report the scan start time (in terms of TSF) 3. Report each BSS's detection time (also in terms of TSF) TSF times refer to the BSS that the interface that requested the scan is connected to. Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> [changed ath9k/10k, at76c59x-usb, iwlegacy, wl1251 and wlcore to match the new API] Signed-off-by: Luca Coelho <luciano.coelho@intel.com> --- drivers/net/wireless/ath/ath10k/mac.c | 14 +++++---- drivers/net/wireless/ath/ath9k/channel.c | 5 +++- drivers/net/wireless/atmel/at76c50x-usb.c | 5 +++- drivers/net/wireless/intel/iwlegacy/common.c | 6 +++- drivers/net/wireless/intel/iwlwifi/dvm/scan.c | 6 +++- drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 37 ++++++++++++++++++----- drivers/net/wireless/mac80211_hwsim.c | 11 +++++-- drivers/net/wireless/st/cw1200/scan.c | 6 +++- drivers/net/wireless/ti/wl1251/event.c | 6 +++- drivers/net/wireless/ti/wl1251/main.c | 6 +++- drivers/net/wireless/ti/wlcore/main.c | 11 +++++-- drivers/net/wireless/ti/wlcore/scan.c | 5 +++- include/net/mac80211.h | 5 ++-- net/mac80211/ieee80211_i.h | 1 + net/mac80211/scan.c | 42 ++++++++++++++++++++++----- 15 files changed, 131 insertions(+), 35 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index d4b7a16..ebc12c5 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -3858,12 +3858,16 @@ void __ath10k_scan_finish(struct ath10k *ar) break; case ATH10K_SCAN_RUNNING: case ATH10K_SCAN_ABORTING: - if (!ar->scan.is_roc) - ieee80211_scan_completed(ar->hw, - (ar->scan.state == - ATH10K_SCAN_ABORTING)); - else if (ar->scan.roc_notify) + if (!ar->scan.is_roc) { + struct cfg80211_scan_info info = { + .aborted = (ar->scan.state == + ATH10K_SCAN_ABORTING), + }; + + ieee80211_scan_completed(ar->hw, &info); + } else if (ar->scan.roc_notify) { ieee80211_remain_on_channel_expired(ar->hw); + } /* fall through */ case ATH10K_SCAN_STARTING: ar->scan.state = ATH10K_SCAN_IDLE; diff --git a/drivers/net/wireless/ath/ath9k/channel.c b/drivers/net/wireless/ath/ath9k/channel.c index e56bafc..57e26a6 100644 --- a/drivers/net/wireless/ath/ath9k/channel.c +++ b/drivers/net/wireless/ath/ath9k/channel.c @@ -960,6 +960,9 @@ void ath_roc_complete(struct ath_softc *sc, enum ath_roc_complete_reason reason) void ath_scan_complete(struct ath_softc *sc, bool abort) { struct ath_common *common = ath9k_hw_common(sc->sc_ah); + struct cfg80211_scan_info info = { + .aborted = abort, + }; if (abort) ath_dbg(common, CHAN_CTX, "HW scan aborted\n"); @@ -969,7 +972,7 @@ void ath_scan_complete(struct ath_softc *sc, bool abort) sc->offchannel.scan_req = NULL; sc->offchannel.scan_vif = NULL; sc->offchannel.state = ATH_OFFCHANNEL_IDLE; - ieee80211_scan_completed(sc->hw, abort); + ieee80211_scan_completed(sc->hw, &info); clear_bit(ATH_OP_SCANNING, &common->op_flags); spin_lock_bh(&sc->chan_lock); if (test_bit(ATH_OP_MULTI_CHANNEL, &common->op_flags)) diff --git a/drivers/net/wireless/atmel/at76c50x-usb.c b/drivers/net/wireless/atmel/at76c50x-usb.c index 7c10804..0e18067 100644 --- a/drivers/net/wireless/atmel/at76c50x-usb.c +++ b/drivers/net/wireless/atmel/at76c50x-usb.c @@ -1922,6 +1922,9 @@ static void at76_dwork_hw_scan(struct work_struct *work) { struct at76_priv *priv = container_of(work, struct at76_priv, dwork_hw_scan.work); + struct cfg80211_scan_info info = { + .aborted = false, + }; int ret; if (priv->device_unplugged) @@ -1948,7 +1951,7 @@ static void at76_dwork_hw_scan(struct work_struct *work) mutex_unlock(&priv->mtx); - ieee80211_scan_completed(priv->hw, false); + ieee80211_scan_completed(priv->hw, &info); ieee80211_wake_queues(priv->hw); } diff --git a/drivers/net/wireless/intel/iwlegacy/common.c b/drivers/net/wireless/intel/iwlegacy/common.c index eb24b92..140b6ea 100644 --- a/drivers/net/wireless/intel/iwlegacy/common.c +++ b/drivers/net/wireless/intel/iwlegacy/common.c @@ -1305,10 +1305,14 @@ il_send_scan_abort(struct il_priv *il) static void il_complete_scan(struct il_priv *il, bool aborted) { + struct cfg80211_scan_info info = { + .aborted = aborted, + }; + /* check if scan was requested from mac80211 */ if (il->scan_request) { D_SCAN("Complete scan in mac80211\n"); - ieee80211_scan_completed(il->hw, aborted); + ieee80211_scan_completed(il->hw, &info); } il->scan_vif = NULL; diff --git a/drivers/net/wireless/intel/iwlwifi/dvm/scan.c b/drivers/net/wireless/intel/iwlwifi/dvm/scan.c index d01766f..17e6a32 100644 --- a/drivers/net/wireless/intel/iwlwifi/dvm/scan.c +++ b/drivers/net/wireless/intel/iwlwifi/dvm/scan.c @@ -94,10 +94,14 @@ static int iwl_send_scan_abort(struct iwl_priv *priv) static void iwl_complete_scan(struct iwl_priv *priv, bool aborted) { + struct cfg80211_scan_info info = { + .aborted = aborted, + }; + /* check if scan was requested from mac80211 */ if (priv->scan_request) { IWL_DEBUG_SCAN(priv, "Complete scan in mac80211\n"); - ieee80211_scan_completed(priv->hw, aborted); + ieee80211_scan_completed(priv->hw, &info); } priv->scan_type = IWL_SCAN_NORMAL; diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c index e78fc56..1cac10c 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c @@ -391,13 +391,16 @@ void iwl_mvm_rx_lmac_scan_complete_notif(struct iwl_mvm *mvm, ieee80211_sched_scan_stopped(mvm->hw); mvm->sched_scan_pass_all = SCHED_SCAN_PASS_ALL_DISABLED; } else if (mvm->scan_status & IWL_MVM_SCAN_REGULAR) { + struct cfg80211_scan_info info = { + .aborted = aborted, + }; + IWL_DEBUG_SCAN(mvm, "Regular scan %s, EBS status %s (FW)\n", aborted ? "aborted" : "completed", iwl_mvm_ebs_status_str(scan_notif->ebs_status)); mvm->scan_status &= ~IWL_MVM_SCAN_REGULAR; - ieee80211_scan_completed(mvm->hw, - scan_notif->status == IWL_SCAN_OFFLOAD_ABORTED); + ieee80211_scan_completed(mvm->hw, &info); iwl_mvm_unref(mvm, IWL_MVM_REF_SCAN); del_timer(&mvm->scan_timer); } else { @@ -1430,7 +1433,11 @@ void iwl_mvm_rx_umac_scan_complete_notif(struct iwl_mvm *mvm, /* if the scan is already stopping, we don't need to notify mac80211 */ if (mvm->scan_uid_status[uid] == IWL_MVM_SCAN_REGULAR) { - ieee80211_scan_completed(mvm->hw, aborted); + struct cfg80211_scan_info info = { + .aborted = aborted, + }; + + ieee80211_scan_completed(mvm->hw, &info); iwl_mvm_unref(mvm, IWL_MVM_REF_SCAN); del_timer(&mvm->scan_timer); } else if (mvm->scan_uid_status[uid] == IWL_MVM_SCAN_SCHED) { @@ -1564,7 +1571,11 @@ void iwl_mvm_report_scan_aborted(struct iwl_mvm *mvm) uid = iwl_mvm_scan_uid_by_status(mvm, IWL_MVM_SCAN_REGULAR); if (uid >= 0) { - ieee80211_scan_completed(mvm->hw, true); + struct cfg80211_scan_info info = { + .aborted = true, + }; + + ieee80211_scan_completed(mvm->hw, &info); mvm->scan_uid_status[uid] = 0; } uid = iwl_mvm_scan_uid_by_status(mvm, IWL_MVM_SCAN_SCHED); @@ -1585,8 +1596,13 @@ void iwl_mvm_report_scan_aborted(struct iwl_mvm *mvm) mvm->scan_uid_status[i] = 0; } } else { - if (mvm->scan_status & IWL_MVM_SCAN_REGULAR) - ieee80211_scan_completed(mvm->hw, true); + if (mvm->scan_status & IWL_MVM_SCAN_REGULAR) { + struct cfg80211_scan_info info = { + .aborted = true, + }; + + ieee80211_scan_completed(mvm->hw, &info); + } /* Sched scan will be restarted by mac80211 in * restart_hw, so do not report if FW is about to be @@ -1629,8 +1645,13 @@ out: */ iwl_mvm_unref(mvm, IWL_MVM_REF_SCAN); del_timer(&mvm->scan_timer); - if (notify) - ieee80211_scan_completed(mvm->hw, true); + if (notify) { + struct cfg80211_scan_info info = { + .aborted = true, + }; + + ieee80211_scan_completed(mvm->hw, &info); + } } else if (notify) { ieee80211_sched_scan_stopped(mvm->hw); mvm->sched_scan_pass_all = SCHED_SCAN_PASS_ALL_DISABLED; diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 97196c4..2ddde1a 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -1941,8 +1941,12 @@ static void hw_scan_work(struct work_struct *work) mutex_lock(&hwsim->mutex); if (hwsim->scan_chan_idx >= req->n_channels) { + struct cfg80211_scan_info info = { + .aborted = false, + }; + wiphy_debug(hwsim->hw->wiphy, "hw scan complete\n"); - ieee80211_scan_completed(hwsim->hw, false); + ieee80211_scan_completed(hwsim->hw, &info); hwsim->hw_scan_request = NULL; hwsim->hw_scan_vif = NULL; hwsim->tmp_chan = NULL; @@ -2027,13 +2031,16 @@ static void mac80211_hwsim_cancel_hw_scan(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { struct mac80211_hwsim_data *hwsim = hw->priv; + struct cfg80211_scan_info info = { + .aborted = true, + }; wiphy_debug(hw->wiphy, "hwsim cancel_hw_scan\n"); cancel_delayed_work_sync(&hwsim->hw_scan); mutex_lock(&hwsim->mutex); - ieee80211_scan_completed(hwsim->hw, true); + ieee80211_scan_completed(hwsim->hw, &info); hwsim->tmp_chan = NULL; hwsim->hw_scan_request = NULL; hwsim->hw_scan_vif = NULL; diff --git a/drivers/net/wireless/st/cw1200/scan.c b/drivers/net/wireless/st/cw1200/scan.c index 9837881..0a0ff7e 100644 --- a/drivers/net/wireless/st/cw1200/scan.c +++ b/drivers/net/wireless/st/cw1200/scan.c @@ -167,6 +167,10 @@ void cw1200_scan_work(struct work_struct *work) } if (!priv->scan.req || (priv->scan.curr == priv->scan.end)) { + struct cfg80211_scan_info info = { + .aborted = priv->scan.status ? 1 : 0, + }; + if (priv->scan.output_power != priv->output_power) wsm_set_output_power(priv, priv->output_power * 10); if (priv->join_status == CW1200_JOIN_STATUS_STA && @@ -188,7 +192,7 @@ void cw1200_scan_work(struct work_struct *work) cw1200_scan_restart_delayed(priv); wsm_unlock_tx(priv); mutex_unlock(&priv->conf_mutex); - ieee80211_scan_completed(priv->hw, priv->scan.status ? 1 : 0); + ieee80211_scan_completed(priv->hw, &info); up(&priv->scan.lock); return; } else { diff --git a/drivers/net/wireless/ti/wl1251/event.c b/drivers/net/wireless/ti/wl1251/event.c index c986303..d0593bc 100644 --- a/drivers/net/wireless/ti/wl1251/event.c +++ b/drivers/net/wireless/ti/wl1251/event.c @@ -36,7 +36,11 @@ static int wl1251_event_scan_complete(struct wl1251 *wl, mbox->scheduled_scan_channels); if (wl->scanning) { - ieee80211_scan_completed(wl->hw, false); + struct cfg80211_scan_info info = { + .aborted = false, + }; + + ieee80211_scan_completed(wl->hw, &info); wl1251_debug(DEBUG_MAC80211, "mac80211 hw scan completed"); wl->scanning = false; if (wl->hw->conf.flags & IEEE80211_CONF_IDLE) diff --git a/drivers/net/wireless/ti/wl1251/main.c b/drivers/net/wireless/ti/wl1251/main.c index 56384a4e..bbf7604 100644 --- a/drivers/net/wireless/ti/wl1251/main.c +++ b/drivers/net/wireless/ti/wl1251/main.c @@ -448,7 +448,11 @@ static void wl1251_op_stop(struct ieee80211_hw *hw) WARN_ON(wl->state != WL1251_STATE_ON); if (wl->scanning) { - ieee80211_scan_completed(wl->hw, true); + struct cfg80211_scan_info info = { + .aborted = true, + }; + + ieee80211_scan_completed(wl->hw, &info); wl->scanning = false; } diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 10fd24c..69267d5 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -2615,6 +2615,10 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl, if (wl->scan.state != WL1271_SCAN_STATE_IDLE && wl->scan_wlvif == wlvif) { + struct cfg80211_scan_info info = { + .aborted = true, + }; + /* * Rearm the tx watchdog just before idling scan. This * prevents just-finished scans from triggering the watchdog @@ -2625,7 +2629,7 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl, memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch)); wl->scan_wlvif = NULL; wl->scan.req = NULL; - ieee80211_scan_completed(wl->hw, true); + ieee80211_scan_completed(wl->hw, &info); } if (wl->sched_vif == wlvif) @@ -3649,6 +3653,9 @@ static void wl1271_op_cancel_hw_scan(struct ieee80211_hw *hw, { struct wl1271 *wl = hw->priv; struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); + struct cfg80211_scan_info info = { + .aborted = true, + }; int ret; wl1271_debug(DEBUG_MAC80211, "mac80211 cancel hw scan"); @@ -3681,7 +3688,7 @@ static void wl1271_op_cancel_hw_scan(struct ieee80211_hw *hw, memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch)); wl->scan_wlvif = NULL; wl->scan.req = NULL; - ieee80211_scan_completed(wl->hw, true); + ieee80211_scan_completed(wl->hw, &info); out_sleep: wl1271_ps_elp_sleep(wl); diff --git a/drivers/net/wireless/ti/wlcore/scan.c b/drivers/net/wireless/ti/wlcore/scan.c index 2334364..5612f59 100644 --- a/drivers/net/wireless/ti/wlcore/scan.c +++ b/drivers/net/wireless/ti/wlcore/scan.c @@ -36,6 +36,9 @@ void wl1271_scan_complete_work(struct work_struct *work) struct delayed_work *dwork; struct wl1271 *wl; struct wl12xx_vif *wlvif; + struct cfg80211_scan_info info = { + .aborted = false, + }; int ret; dwork = to_delayed_work(work); @@ -82,7 +85,7 @@ void wl1271_scan_complete_work(struct work_struct *work) wlcore_cmd_regdomain_config_locked(wl); - ieee80211_scan_completed(wl->hw, false); + ieee80211_scan_completed(wl->hw, &info); out: mutex_unlock(&wl->mutex); diff --git a/include/net/mac80211.h b/include/net/mac80211.h index a52009f..b4faadb 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -4697,9 +4697,10 @@ void ieee80211_wake_queues(struct ieee80211_hw *hw); * any context, including hardirq context. * * @hw: the hardware that finished the scan - * @aborted: set to true if scan was aborted + * @info: information about the completed scan */ -void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted); +void ieee80211_scan_completed(struct ieee80211_hw *hw, + struct cfg80211_scan_info *info); /** * ieee80211_sched_scan_results - got results from scheduled scan diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 54edfb6..f56d342 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1250,6 +1250,7 @@ struct ieee80211_local { int scan_channel_idx; int scan_ies_len; int hw_scan_ies_bufsize; + struct cfg80211_scan_info scan_info; struct work_struct sched_scan_stopped_work; struct ieee80211_sub_if_data __rcu *sched_scan_sdata; diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 4ec1c52..8d4a9cd 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -7,6 +7,7 @@ * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> * Copyright 2007, Michael Wu <flamingice@sourmilk.net> * Copyright 2013-2015 Intel Mobile Communications GmbH + * Copyright 2016 Intel Deutschland GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -70,6 +71,7 @@ ieee80211_bss_info_update(struct ieee80211_local *local, .boottime_ns = rx_status->boottime_ns, }; bool signal_valid; + struct ieee80211_sub_if_data *scan_sdata; if (ieee80211_hw_check(&local->hw, SIGNAL_DBM)) bss_meta.signal = rx_status->signal * 100; @@ -83,6 +85,20 @@ ieee80211_bss_info_update(struct ieee80211_local *local, bss_meta.scan_width = NL80211_BSS_CHAN_WIDTH_10; bss_meta.chan = channel; + + rcu_read_lock(); + scan_sdata = rcu_dereference(local->scan_sdata); + if (scan_sdata && scan_sdata->vif.type == NL80211_IFTYPE_STATION && + scan_sdata->vif.bss_conf.assoc && + ieee80211_have_rx_timestamp(rx_status)) { + bss_meta.parent_tsf = + ieee80211_calculate_rx_timestamp(local, rx_status, + len + FCS_LEN, 24); + ether_addr_copy(bss_meta.parent_bssid, + scan_sdata->vif.bss_conf.bssid); + } + rcu_read_unlock(); + cbss = cfg80211_inform_bss_frame_data(local->hw.wiphy, &bss_meta, mgmt, len, GFP_ATOMIC); if (!cbss) @@ -345,6 +361,11 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) if (rc == 0) return; + + /* HW scan failed and is going to be reported as done, so clear + * old scan info. + */ + memset(&local->scan_info, 0, sizeof(local->scan_info)); } kfree(local->hw_scan_req); @@ -354,11 +375,8 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) lockdep_is_held(&local->mtx)); if (scan_req != local->int_scan_req) { - struct cfg80211_scan_info info = { - .aborted = aborted, - }; - - cfg80211_scan_done(scan_req, &info); + local->scan_info.aborted = aborted; + cfg80211_scan_done(scan_req, &local->scan_info); } RCU_INIT_POINTER(local->scan_req, NULL); @@ -396,15 +414,19 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) ieee80211_start_next_roc(local); } -void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) +void ieee80211_scan_completed(struct ieee80211_hw *hw, + struct cfg80211_scan_info *info) { struct ieee80211_local *local = hw_to_local(hw); - trace_api_scan_completed(local, aborted); + trace_api_scan_completed(local, info); set_bit(SCAN_COMPLETED, &local->scanning); - if (aborted) + if (info->aborted) set_bit(SCAN_ABORTED, &local->scanning); + + memcpy(&local->scan_info, info, sizeof(*info)); + ieee80211_queue_delayed_work(&local->hw, &local->scan_work, 0); } EXPORT_SYMBOL(ieee80211_scan_completed); @@ -571,6 +593,9 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata, local->hw_scan_req->req.ie = ies; local->hw_scan_req->req.flags = req->flags; eth_broadcast_addr(local->hw_scan_req->req.bssid); + local->hw_scan_req->req.duration = req->duration; + local->hw_scan_req->req.duration_mandatory = + req->duration_mandatory; local->hw_scan_band = 0; @@ -1078,6 +1103,7 @@ void ieee80211_scan_cancel(struct ieee80211_local *local) */ cancel_delayed_work(&local->scan_work); /* and clean up */ + memset(&local->scan_info, 0, sizeof(local->scan_info)); __ieee80211_scan_completed(&local->hw, true); out: mutex_unlock(&local->mtx); -- 2.8.1 ^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 6/7] mac80211: report failure to start (partial) scan as scan abort 2016-07-05 12:23 [PATCH 0/7] mac80211/cfg80211: a bunch of patches from our internal tree Luca Coelho ` (4 preceding siblings ...) 2016-07-05 12:23 ` [PATCH 5/7] mac80211: Add support for beacon report radio measurement Luca Coelho @ 2016-07-05 12:23 ` Luca Coelho 2016-07-05 12:23 ` [PATCH 7/7] mac80211: parse wide bandwidth channel switch IE with workaround Luca Coelho 2016-07-06 13:06 ` [PATCH 0/7] mac80211/cfg80211: a bunch of patches from our internal tree Johannes Berg 7 siblings, 0 replies; 16+ messages in thread From: Luca Coelho @ 2016-07-05 12:23 UTC (permalink / raw) To: johannes; +Cc: linux-wireless, Johannes Berg, Luca Coelho From: Johannes Berg <johannes.berg@intel.com> Rather than reporting the scan as having completed, report it as being aborted. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> --- net/mac80211/scan.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 8d4a9cd..070b40f 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -362,10 +362,11 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) if (rc == 0) return; - /* HW scan failed and is going to be reported as done, so clear - * old scan info. + /* HW scan failed and is going to be reported as aborted, + * so clear old scan info. */ memset(&local->scan_info, 0, sizeof(local->scan_info)); + aborted = true; } kfree(local->hw_scan_req); -- 2.8.1 ^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 7/7] mac80211: parse wide bandwidth channel switch IE with workaround 2016-07-05 12:23 [PATCH 0/7] mac80211/cfg80211: a bunch of patches from our internal tree Luca Coelho ` (5 preceding siblings ...) 2016-07-05 12:23 ` [PATCH 6/7] mac80211: report failure to start (partial) scan as scan abort Luca Coelho @ 2016-07-05 12:23 ` Luca Coelho 2016-07-06 13:06 ` [PATCH 0/7] mac80211/cfg80211: a bunch of patches from our internal tree Johannes Berg 7 siblings, 0 replies; 16+ messages in thread From: Luca Coelho @ 2016-07-05 12:23 UTC (permalink / raw) To: johannes; +Cc: linux-wireless, Johannes Berg, Luca Coelho From: Johannes Berg <johannes.berg@intel.com> Continuing the workaround implemented in commit 23665aaf9170 ("mac80211: Interoperability workaround for 80+80 and 160 MHz channels") use the same code to parse the Wide Bandwidth Channel Switch element by converting to VHT Operation element since the spec also just refers to that for parsing semantics, particularly with the workaround. While at it, remove some dead code - the IEEE80211_STA_DISABLE_40MHZ flag can never be set at this point since it's checked earlier and the wide_bw_chansw_ie pointer is set to NULL if it's set. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> --- net/mac80211/spectmgmt.c | 45 +++++++++++++++++---------------------------- 1 file changed, 17 insertions(+), 28 deletions(-) diff --git a/net/mac80211/spectmgmt.c b/net/mac80211/spectmgmt.c index 2ddc661..97f4c9d 100644 --- a/net/mac80211/spectmgmt.c +++ b/net/mac80211/spectmgmt.c @@ -129,42 +129,31 @@ int ieee80211_parse_ch_switch_ie(struct ieee80211_sub_if_data *sdata, } if (wide_bw_chansw_ie) { - new_vht_chandef.chan = new_chan; - new_vht_chandef.center_freq1 = - ieee80211_channel_to_frequency( + struct ieee80211_vht_operation vht_oper = { + .chan_width = + wide_bw_chansw_ie->new_channel_width, + .center_freq_seg1_idx = wide_bw_chansw_ie->new_center_freq_seg0, - new_band); - - switch (wide_bw_chansw_ie->new_channel_width) { - default: - /* hmmm, ignore VHT and use HT if present */ - case IEEE80211_VHT_CHANWIDTH_USE_HT: + .center_freq_seg2_idx = + wide_bw_chansw_ie->new_center_freq_seg1, + /* .basic_mcs_set doesn't matter */ + }; + + /* default, for the case of IEEE80211_VHT_CHANWIDTH_USE_HT, + * to the previously parsed chandef + */ + new_vht_chandef = csa_ie->chandef; + + /* ignore if parsing fails */ + if (!ieee80211_chandef_vht_oper(&vht_oper, &new_vht_chandef)) new_vht_chandef.chan = NULL; - break; - case IEEE80211_VHT_CHANWIDTH_80MHZ: - new_vht_chandef.width = NL80211_CHAN_WIDTH_80; - break; - case IEEE80211_VHT_CHANWIDTH_160MHZ: - new_vht_chandef.width = NL80211_CHAN_WIDTH_160; - break; - case IEEE80211_VHT_CHANWIDTH_80P80MHZ: - /* field is otherwise reserved */ - new_vht_chandef.center_freq2 = - ieee80211_channel_to_frequency( - wide_bw_chansw_ie->new_center_freq_seg1, - new_band); - new_vht_chandef.width = NL80211_CHAN_WIDTH_80P80; - break; - } + if (sta_flags & IEEE80211_STA_DISABLE_80P80MHZ && new_vht_chandef.width == NL80211_CHAN_WIDTH_80P80) ieee80211_chandef_downgrade(&new_vht_chandef); if (sta_flags & IEEE80211_STA_DISABLE_160MHZ && new_vht_chandef.width == NL80211_CHAN_WIDTH_160) ieee80211_chandef_downgrade(&new_vht_chandef); - if (sta_flags & IEEE80211_STA_DISABLE_40MHZ && - new_vht_chandef.width > NL80211_CHAN_WIDTH_20) - ieee80211_chandef_downgrade(&new_vht_chandef); } /* if VHT data is there validate & use it */ -- 2.8.1 ^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH 0/7] mac80211/cfg80211: a bunch of patches from our internal tree 2016-07-05 12:23 [PATCH 0/7] mac80211/cfg80211: a bunch of patches from our internal tree Luca Coelho ` (6 preceding siblings ...) 2016-07-05 12:23 ` [PATCH 7/7] mac80211: parse wide bandwidth channel switch IE with workaround Luca Coelho @ 2016-07-06 13:06 ` Johannes Berg 7 siblings, 0 replies; 16+ messages in thread From: Johannes Berg @ 2016-07-06 13:06 UTC (permalink / raw) To: Luca Coelho; +Cc: linux-wireless, Luca Coelho On Tue, 2016-07-05 at 15:23 +0300, Luca Coelho wrote: > From: Luca Coelho <luciano.coelho@intel.com> > > Hi Johannes, > > These are some cfg80211/mac80211 patches that were pending > upstreaming > in our internal tree (I think you know about them ;). > Also applied the remaining ones. johannes ^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2016-07-06 13:06 UTC | newest] Thread overview: 16+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2016-07-05 12:23 [PATCH 0/7] mac80211/cfg80211: a bunch of patches from our internal tree Luca Coelho 2016-07-05 12:23 ` [PATCH 1/7] nl80211: Add API to support VHT MU-MIMO air sniffer Luca Coelho 2016-07-05 12:23 ` [PATCH 2/7] mac80211_hwsim: Add radar bandwidths to the P2P Device combination Luca Coelho 2016-07-05 12:23 ` [PATCH 3/7] cfg80211: handle failed skb allocation Luca Coelho 2016-07-06 11:51 ` Johannes Berg 2016-07-06 11:53 ` Luca Coelho 2016-07-05 12:23 ` [PATCH 4/7] nl80211: Add info to scan results to support beacon report Luca Coelho 2016-07-05 13:18 ` kbuild test robot 2016-07-05 13:22 ` kbuild test robot 2016-07-05 13:26 ` Coelho, Luciano 2016-07-05 14:10 ` [PATCH v2] " Luca Coelho 2016-07-05 14:12 ` Luca Coelho 2016-07-05 12:23 ` [PATCH 5/7] mac80211: Add support for beacon report radio measurement Luca Coelho 2016-07-05 12:23 ` [PATCH 6/7] mac80211: report failure to start (partial) scan as scan abort Luca Coelho 2016-07-05 12:23 ` [PATCH 7/7] mac80211: parse wide bandwidth channel switch IE with workaround Luca Coelho 2016-07-06 13:06 ` [PATCH 0/7] mac80211/cfg80211: a bunch of patches from our internal tree Johannes Berg
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.