All of lore.kernel.org
 help / color / mirror / Atom feed
From: shankerd@codeaurora.org (Shanker Donthineni)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] irqchip/gicv3-its: Enable cacheable attribute Read-allocate hints
Date: Mon, 11 Jul 2016 22:36:48 -0500	[thread overview]
Message-ID: <1468294608-30619-1-git-send-email-shankerd@codeaurora.org> (raw)

Read-allocation hints are not enabled for both the GIC-ITS and GICR
tables. This forces the hardware to always read the table contents
from an external memory (DDR) which is slow compared to cache memory.
Most of the tables are often read by hardware. So, it's better to
enable Read-allocate hints in addition to Write-allocate hints in
order to improve the GICR_PEND, GICR_PROP, Collection, Device, and
vCPU tables lookup time.

Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
---
 drivers/irqchip/irq-gic-v3-its.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 7ceaba8..6fc92a8 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -954,7 +954,7 @@ static bool its_parse_baser_device(struct its_node *its, struct its_baser *baser
 				   u32 psz, u32 *order)
 {
 	u64 esz = GITS_BASER_ENTRY_SIZE(its_read_baser(its, baser));
-	u64 val = GITS_BASER_InnerShareable | GITS_BASER_WaWb;
+	u64 val = GITS_BASER_InnerShareable | GITS_BASER_RaWaWb;
 	u32 ids = its->device_ids;
 	u32 new_order = *order;
 	bool indirect = false;
@@ -1019,7 +1019,7 @@ static int its_alloc_tables(struct its_node *its)
 	u64 typer = readq_relaxed(its->base + GITS_TYPER);
 	u32 ids = GITS_TYPER_DEVBITS(typer);
 	u64 shr = GITS_BASER_InnerShareable;
-	u64 cache = GITS_BASER_WaWb;
+	u64 cache = GITS_BASER_RaWaWb;
 	u32 psz = SZ_64K;
 	int err, i;
 
@@ -1116,7 +1116,7 @@ static void its_cpu_init_lpis(void)
 	/* set PROPBASE */
 	val = (page_to_phys(gic_rdists->prop_page) |
 	       GICR_PROPBASER_InnerShareable |
-	       GICR_PROPBASER_WaWb |
+	       GICR_PROPBASER_RaWaWb |
 	       ((LPI_NRBITS - 1) & GICR_PROPBASER_IDBITS_MASK));
 
 	writeq_relaxed(val, rbase + GICR_PROPBASER);
@@ -1141,7 +1141,7 @@ static void its_cpu_init_lpis(void)
 	/* set PENDBASE */
 	val = (page_to_phys(pend_page) |
 	       GICR_PENDBASER_InnerShareable |
-	       GICR_PENDBASER_WaWb);
+	       GICR_PENDBASER_RaWaWb);
 
 	writeq_relaxed(val, rbase + GICR_PENDBASER);
 	tmp = readq_relaxed(rbase + GICR_PENDBASER);
-- 
Qualcomm Datacenter Technologies, Inc. on behalf of the Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.

WARNING: multiple messages have this Message-ID (diff)
From: Shanker Donthineni <shankerd@codeaurora.org>
To: Marc Zyngier <marc.zyngier@arm.com>,
	linux-kernel <linux-kernel@vger.kernel.org>,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>,
	Jason Cooper <jason@lakedaemon.net>,
	Vikram Sethi <vikrams@codeaurora.org>,
	Philip Elcan <pelcan@codeaurora.org>,
	Shanker Donthineni <shankerd@codeaurora.org>
Subject: [PATCH] irqchip/gicv3-its: Enable cacheable attribute Read-allocate hints
Date: Mon, 11 Jul 2016 22:36:48 -0500	[thread overview]
Message-ID: <1468294608-30619-1-git-send-email-shankerd@codeaurora.org> (raw)

Read-allocation hints are not enabled for both the GIC-ITS and GICR
tables. This forces the hardware to always read the table contents
from an external memory (DDR) which is slow compared to cache memory.
Most of the tables are often read by hardware. So, it's better to
enable Read-allocate hints in addition to Write-allocate hints in
order to improve the GICR_PEND, GICR_PROP, Collection, Device, and
vCPU tables lookup time.

Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
---
 drivers/irqchip/irq-gic-v3-its.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 7ceaba8..6fc92a8 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -954,7 +954,7 @@ static bool its_parse_baser_device(struct its_node *its, struct its_baser *baser
 				   u32 psz, u32 *order)
 {
 	u64 esz = GITS_BASER_ENTRY_SIZE(its_read_baser(its, baser));
-	u64 val = GITS_BASER_InnerShareable | GITS_BASER_WaWb;
+	u64 val = GITS_BASER_InnerShareable | GITS_BASER_RaWaWb;
 	u32 ids = its->device_ids;
 	u32 new_order = *order;
 	bool indirect = false;
@@ -1019,7 +1019,7 @@ static int its_alloc_tables(struct its_node *its)
 	u64 typer = readq_relaxed(its->base + GITS_TYPER);
 	u32 ids = GITS_TYPER_DEVBITS(typer);
 	u64 shr = GITS_BASER_InnerShareable;
-	u64 cache = GITS_BASER_WaWb;
+	u64 cache = GITS_BASER_RaWaWb;
 	u32 psz = SZ_64K;
 	int err, i;
 
@@ -1116,7 +1116,7 @@ static void its_cpu_init_lpis(void)
 	/* set PROPBASE */
 	val = (page_to_phys(gic_rdists->prop_page) |
 	       GICR_PROPBASER_InnerShareable |
-	       GICR_PROPBASER_WaWb |
+	       GICR_PROPBASER_RaWaWb |
 	       ((LPI_NRBITS - 1) & GICR_PROPBASER_IDBITS_MASK));
 
 	writeq_relaxed(val, rbase + GICR_PROPBASER);
@@ -1141,7 +1141,7 @@ static void its_cpu_init_lpis(void)
 	/* set PENDBASE */
 	val = (page_to_phys(pend_page) |
 	       GICR_PENDBASER_InnerShareable |
-	       GICR_PENDBASER_WaWb);
+	       GICR_PENDBASER_RaWaWb);
 
 	writeq_relaxed(val, rbase + GICR_PENDBASER);
 	tmp = readq_relaxed(rbase + GICR_PENDBASER);
-- 
Qualcomm Datacenter Technologies, Inc. on behalf of the Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.

             reply	other threads:[~2016-07-12  3:36 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-12  3:36 Shanker Donthineni [this message]
2016-07-12  3:36 ` [PATCH] irqchip/gicv3-its: Enable cacheable attribute Read-allocate hints Shanker Donthineni
2016-07-12  8:09 ` Marc Zyngier
2016-07-12  8:09   ` Marc Zyngier
2016-07-12 13:32   ` Shanker Donthineni
2016-07-12 13:32     ` Shanker Donthineni
2016-08-29 15:35     ` Shanker Donthineni
2016-08-29 15:35       ` Shanker Donthineni
2016-08-30  8:42       ` Marc Zyngier
2016-08-30  8:42         ` Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1468294608-30619-1-git-send-email-shankerd@codeaurora.org \
    --to=shankerd@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.