From: Ritesh Harjani <riteshh@codeaurora.org>
To: ulf.hansson@linaro.org, linux-mmc@vger.kernel.org,
adrian.hunter@intel.com
Cc: linux-arm-msm@vger.kernel.org, georgi.djakov@linaro.org,
alex.lemberg@sandisk.com, mateusz.nowak@intel.com,
Yuliy.Izrailov@sandisk.com, asutoshd@codeaurora.org,
sthumma@codeaurora.org, kdorfman@codeaurora.org,
david.griego@linaro.org, stummala@codeaurora.org,
venkatg@codeaurora.org, Ritesh Harjani <riteshh@codeaurora.org>
Subject: [PATCH 07/10] mmc: sdhci-msm: Implement set_clock callback for sdhci-msm
Date: Wed, 10 Aug 2016 20:31:56 +0530 [thread overview]
Message-ID: <1470841319-6091-8-git-send-email-riteshh@codeaurora.org> (raw)
In-Reply-To: <1470841319-6091-1-git-send-email-riteshh@codeaurora.org>
From: Sahitya Tummala <stummala@codeaurora.org>
sdhci-msm controller may have different clk-rates for each
bus speed mode. Thus implement set_clock callback for
sdhci-msm driver.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org>
---
drivers/mmc/host/sdhci-msm.c | 56 +++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 55 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index cfd0209..03deeab 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -89,6 +89,7 @@ struct sdhci_msm_host {
struct mmc_host *mmc;
bool use_updated_dll_reset;
struct sdhci_msm_pltfm_data *pdata;
+ u32 clk_rate;
};
/* Platform specific tuning */
@@ -570,6 +571,59 @@ static unsigned int sdhci_msm_get_min_clock(struct sdhci_host *host)
return msm_host->pdata->clk_table[0];
}
+static unsigned int sdhci_msm_get_msm_clk_rate(struct sdhci_host *host,
+ u32 req_clk)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+ int count = msm_host->pdata->clk_table_sz;
+ unsigned int sel_clk = -1;
+ int cnt;
+
+ if (req_clk < sdhci_msm_get_min_clock(host)) {
+ sel_clk = sdhci_msm_get_min_clock(host);
+ return sel_clk;
+ }
+
+ for (cnt = 0; cnt < count; cnt++) {
+ if (msm_host->pdata->clk_table[cnt] > req_clk) {
+ break;
+ } else if (msm_host->pdata->clk_table[cnt] == req_clk) {
+ sel_clk = msm_host->pdata->clk_table[cnt];
+ break;
+ } else {
+ sel_clk = msm_host->pdata->clk_table[cnt];
+ }
+ }
+ return sel_clk;
+}
+
+static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+ u32 msm_clock = 0;
+ int rc = 0;
+
+ if (!clock)
+ goto out;
+
+ if (clock != msm_host->clk_rate) {
+ msm_clock = sdhci_msm_get_msm_clk_rate(host, clock);
+ rc = clk_set_rate(msm_host->clk, msm_clock);
+ if (rc) {
+ pr_err("%s: failed to set clock at rate %u, requested clock rate %u\n",
+ mmc_hostname(host->mmc), msm_clock, clock);
+ goto out;
+ }
+ msm_host->clk_rate = clock;
+ pr_debug("%s: setting clock at rate %lu\n",
+ mmc_hostname(host->mmc), clk_get_rate(msm_host->clk));
+ }
+out:
+ sdhci_set_clock(host, clock);
+}
+
static const struct of_device_id sdhci_msm_dt_match[] = {
{ .compatible = "qcom,sdhci-msm-v4" },
{},
@@ -580,7 +634,7 @@ MODULE_DEVICE_TABLE(of, sdhci_msm_dt_match);
static const struct sdhci_ops sdhci_msm_ops = {
.platform_execute_tuning = sdhci_msm_execute_tuning,
.reset = sdhci_reset,
- .set_clock = sdhci_set_clock,
+ .set_clock = sdhci_msm_set_clock,
.get_min_clock = sdhci_msm_get_min_clock,
.get_max_clock = sdhci_msm_get_max_clock,
.set_bus_width = sdhci_set_bus_width,
--
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.
next prev parent reply other threads:[~2016-08-10 15:01 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-10 15:01 [PATCH 00/10] Add clk-rates and DDR support to sdhci-msm Ritesh Harjani
2016-08-10 15:01 ` [PATCH 01/10] mmc: sdhci-msm: Update DLL reset sequence Ritesh Harjani
2016-08-10 15:01 ` [PATCH 02/10] mmc: sdhci-msm: add pltfm_data support to get clk-rates from DT Ritesh Harjani
2016-08-10 15:01 ` [PATCH 03/10] arm64: dts: qcom: msm8916: Add clk-rates to sdhc1 & sdhc2 Ritesh Harjani
2016-08-10 15:01 ` [PATCH 04/10] mmc: sdhci-msm: Add get_min_clock() and get_max_clock() callback Ritesh Harjani
2016-08-10 15:01 ` [PATCH 05/10] mmc: sdhci-msm: Enable SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN Ritesh Harjani
2016-08-10 15:01 ` [PATCH 06/10] mmc: sdhci: Add SDHCI_QUIRK2_ALWAYS_USE_BASE_CLOCK quirk2 support Ritesh Harjani
2016-08-11 2:07 ` Shawn Lin
2016-08-11 7:03 ` Ritesh Harjani
2016-08-11 13:52 ` Adding callback in sdhci_calc_clk for geting clk divider Ritesh Harjani
2016-08-11 13:52 ` [PATCH 06/10] mmc: sdhci: Add get_clk_div callback support Ritesh Harjani
2016-08-12 1:34 ` Jaehoon Chung
2016-08-12 2:19 ` Ritesh Harjani
2016-08-12 3:21 ` Shawn Lin
2016-08-12 3:46 ` Ritesh Harjani
2016-08-12 7:21 ` Shawn Lin
2016-08-11 13:52 ` [PATCH 08/10] mmc: sdhci-msm: Add get_clk_div callback definition Ritesh Harjani
2016-08-10 15:01 ` Ritesh Harjani [this message]
2016-08-10 15:01 ` [PATCH 08/10] mmc: sdhci-msm: Enable SDHCI_QUIRK2_ALWAYS_USE_BASE_CLOCK to sdhci-msm Ritesh Harjani
2016-08-10 15:01 ` [PATCH 09/10] mmc: sdhci-msm: Add clock changes for DDR mode Ritesh Harjani
2016-08-10 15:01 ` [PATCH 10/10] arm64: dts: qcom: msm8916: Add ddr support to sdhc1 Ritesh Harjani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470841319-6091-8-git-send-email-riteshh@codeaurora.org \
--to=riteshh@codeaurora.org \
--cc=Yuliy.Izrailov@sandisk.com \
--cc=adrian.hunter@intel.com \
--cc=alex.lemberg@sandisk.com \
--cc=asutoshd@codeaurora.org \
--cc=david.griego@linaro.org \
--cc=georgi.djakov@linaro.org \
--cc=kdorfman@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=mateusz.nowak@intel.com \
--cc=sthumma@codeaurora.org \
--cc=stummala@codeaurora.org \
--cc=ulf.hansson@linaro.org \
--cc=venkatg@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.