* Patch "mfd: qcom_rpm: Parametrize also ack selector size" has been added to the 4.7-stable tree
@ 2016-08-18 8:31 gregkh
0 siblings, 0 replies; only message in thread
From: gregkh @ 2016-08-18 8:31 UTC (permalink / raw)
To: linus.walleij, bjorn.andersson, gregkh, lee.jones, sboyd
Cc: stable, stable-commits
This is a note to let you know that I've just added the patch titled
mfd: qcom_rpm: Parametrize also ack selector size
to the 4.7-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
mfd-qcom_rpm-parametrize-also-ack-selector-size.patch
and it can be found in the queue-4.7 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From f37be01e6dc606f2fcc5e95c9933d948ce19bd35 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Wed, 22 Jun 2016 08:27:17 +0200
Subject: mfd: qcom_rpm: Parametrize also ack selector size
From: Linus Walleij <linus.walleij@linaro.org>
commit f37be01e6dc606f2fcc5e95c9933d948ce19bd35 upstream.
The RPM has two sets of selectors (IPC bit fields): request and
acknowledge. Apparently, some models use 4*32 bit words for select
and some use 7*32 bit words for request, but all use 7*32 words
for acknowledge bits.
So apparently you can on the models with requests of 4*32 select
bits send 4*32 messages and get 7*32 different replies, so on ACK
interrupt, 7*32 bit words need to be read. This is how the vendor
code apparently works.
Reported-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mfd/qcom_rpm.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
--- a/drivers/mfd/qcom_rpm.c
+++ b/drivers/mfd/qcom_rpm.c
@@ -39,7 +39,8 @@ struct qcom_rpm_data {
unsigned int req_sel_off;
unsigned int ack_ctx_off;
unsigned int ack_sel_off;
- unsigned int sel_size;
+ unsigned int req_sel_size;
+ unsigned int ack_sel_size;
};
struct qcom_rpm {
@@ -162,7 +163,8 @@ static const struct qcom_rpm_data apq806
.req_sel_off = 11,
.ack_ctx_off = 15,
.ack_sel_off = 23,
- .sel_size = 4,
+ .req_sel_size = 4,
+ .ack_sel_size = 7,
};
static const struct qcom_rpm_resource msm8660_rpm_resource_table[] = {
@@ -250,7 +252,8 @@ static const struct qcom_rpm_data msm866
.req_sel_off = 11,
.ack_ctx_off = 19,
.ack_sel_off = 27,
- .sel_size = 7,
+ .req_sel_size = 7,
+ .ack_sel_size = 7,
};
static const struct qcom_rpm_resource msm8960_rpm_resource_table[] = {
@@ -337,7 +340,8 @@ static const struct qcom_rpm_data msm896
.req_sel_off = 11,
.ack_ctx_off = 15,
.ack_sel_off = 23,
- .sel_size = 4,
+ .req_sel_size = 4,
+ .ack_sel_size = 7,
};
static const struct qcom_rpm_resource ipq806x_rpm_resource_table[] = {
@@ -382,7 +386,8 @@ static const struct qcom_rpm_data ipq806
.req_sel_off = 11,
.ack_ctx_off = 15,
.ack_sel_off = 23,
- .sel_size = 4,
+ .req_sel_size = 4,
+ .ack_sel_size = 7,
};
static const struct of_device_id qcom_rpm_of_match[] = {
@@ -419,7 +424,7 @@ int qcom_rpm_write(struct qcom_rpm *rpm,
writel_relaxed(buf[i], RPM_REQ_REG(rpm, res->target_id + i));
bitmap_set((unsigned long *)sel_mask, res->select_id, 1);
- for (i = 0; i < rpm->data->sel_size; i++) {
+ for (i = 0; i < rpm->data->req_sel_size; i++) {
writel_relaxed(sel_mask[i],
RPM_CTRL_REG(rpm, rpm->data->req_sel_off + i));
}
@@ -448,7 +453,7 @@ static irqreturn_t qcom_rpm_ack_interrup
int i;
ack = readl_relaxed(RPM_CTRL_REG(rpm, rpm->data->ack_ctx_off));
- for (i = 0; i < rpm->data->sel_size; i++)
+ for (i = 0; i < rpm->data->ack_sel_size; i++)
writel_relaxed(0,
RPM_CTRL_REG(rpm, rpm->data->ack_sel_off + i));
writel(0, RPM_CTRL_REG(rpm, rpm->data->ack_ctx_off));
Patches currently in stable-queue which might be from linus.walleij@linaro.org are
queue-4.7/pinctrl-cherryview-prevent-concurrent-access-to-gpio-controllers.patch
queue-4.7/gpio-pca953x-fix-nbank-calculation-for-pca9536.patch
queue-4.7/mfd-qcom_rpm-parametrize-also-ack-selector-size.patch
queue-4.7/gpio-intel-mid-remove-potentially-harmful-code.patch
queue-4.7/mfd-qcom_rpm-fix-offset-error-for-msm8660.patch
queue-4.7/gpio-intel-mid-switch-to-devm_gpiochip_add_data.patch
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2016-08-18 8:31 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-08-18 8:31 Patch "mfd: qcom_rpm: Parametrize also ack selector size" has been added to the 4.7-stable tree gregkh
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.