From: Kamal Dasu <kdasu.kdev@gmail.com>
To: broonie@kernel.org, linux-spi@vger.kernel.org,
computersforpeace@gmail.com, linux-mtd@lists.infradead.org,
vigneshr@ti.com, f.fainelli@gmail.com,
yendapally.reddy@broadcom.com
Cc: bcm-kernel-feedback-list@broadcom.com, jon.mason@broadcom.com,
Kamal Dasu <kdasu.kdev@gmail.com>
Subject: [PATCH v6, 6/8] arm: dts: Add bcm-nsp and bcm958625k support
Date: Wed, 24 Aug 2016 18:04:27 -0400 [thread overview]
Message-ID: <1472076269-4731-7-git-send-email-kdasu.kdev@gmail.com> (raw)
In-Reply-To: <1472076269-4731-1-git-send-email-kdasu.kdev@gmail.com>
Adding qspi node compatible with the new spi-bcm-qspi
driver for the broadcom's northstar SoC.
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
---
arch/arm/boot/dts/bcm-nsp.dtsi | 31 ++++++++++++++++++++++++++++++-
arch/arm/boot/dts/bcm958625k.dts | 34 ++++++++++++++++++++++++++++++++++
2 files changed, 64 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index c3bf7d2..dd59019 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -160,7 +160,7 @@
axi {
compatible = "simple-bus";
- ranges = <0x00000000 0x18000000 0x0011ba08>;
+ ranges = <0x00000000 0x18000000 0x0011c40a>;
#address-cells = <1>;
#size-cells = <1>;
@@ -228,6 +228,35 @@
reg = <0x33000 0x14>;
};
+ qspi: qspi@27200 {
+ compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
+ reg = <0x027200 0x184>,
+ <0x027000 0x124>,
+ <0x11c408 0x004>,
+ <0x0273a0 0x01c>;
+ reg-names = "mspi", "bspi", "intr_regs",
+ "intr_status_reg";
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "spi_lr_fullness_reached",
+ "spi_lr_session_aborted",
+ "spi_lr_impatient",
+ "spi_lr_session_done",
+ "spi_lr_overhead",
+ "mspi_done",
+ "mspi_halted";
+ clocks = <&iprocmed>;
+ clock-names = "iprocmed";
+ num-cs = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
ccbtimer0: timer@34000 {
compatible = "arm,sp804";
reg = <0x34000 0x1000>;
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 2d84226..1e04923 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -126,3 +126,37 @@
groups = "nand_grp";
};
};
+
+&qspi {
+ bspi-sel = <0>;
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p80";
+ reg = <0x0>;
+ spi-max-frequency = <12500000>;
+ m25p,fast-read;
+ spi-cpol;
+ spi-cpha;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x00000000 0x000a0000>;
+ };
+
+ partition@a0000 {
+ label = "env";
+ reg = <0x000a0000 0x00060000>;
+ };
+
+ partition@100000 {
+ label = "system";
+ reg = <0x00100000 0x00600000>;
+ };
+
+ partition@700000 {
+ label = "rootfs";
+ reg = <0x00700000 0x01900000>;
+ };
+ };
+};
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Kamal Dasu <kdasu.kdev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
vigneshr-l0cyMroinI0@public.gmane.org,
f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
yendapally.reddy-dY08KVG/lbpWk0Htik3J/w@public.gmane.org
Cc: bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
jon.mason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
Kamal Dasu <kdasu.kdev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH v6, 6/8] arm: dts: Add bcm-nsp and bcm958625k support
Date: Wed, 24 Aug 2016 18:04:27 -0400 [thread overview]
Message-ID: <1472076269-4731-7-git-send-email-kdasu.kdev@gmail.com> (raw)
In-Reply-To: <1472076269-4731-1-git-send-email-kdasu.kdev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Adding qspi node compatible with the new spi-bcm-qspi
driver for the broadcom's northstar SoC.
Signed-off-by: Kamal Dasu <kdasu.kdev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
---
arch/arm/boot/dts/bcm-nsp.dtsi | 31 ++++++++++++++++++++++++++++++-
arch/arm/boot/dts/bcm958625k.dts | 34 ++++++++++++++++++++++++++++++++++
2 files changed, 64 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index c3bf7d2..dd59019 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -160,7 +160,7 @@
axi {
compatible = "simple-bus";
- ranges = <0x00000000 0x18000000 0x0011ba08>;
+ ranges = <0x00000000 0x18000000 0x0011c40a>;
#address-cells = <1>;
#size-cells = <1>;
@@ -228,6 +228,35 @@
reg = <0x33000 0x14>;
};
+ qspi: qspi@27200 {
+ compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
+ reg = <0x027200 0x184>,
+ <0x027000 0x124>,
+ <0x11c408 0x004>,
+ <0x0273a0 0x01c>;
+ reg-names = "mspi", "bspi", "intr_regs",
+ "intr_status_reg";
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "spi_lr_fullness_reached",
+ "spi_lr_session_aborted",
+ "spi_lr_impatient",
+ "spi_lr_session_done",
+ "spi_lr_overhead",
+ "mspi_done",
+ "mspi_halted";
+ clocks = <&iprocmed>;
+ clock-names = "iprocmed";
+ num-cs = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
ccbtimer0: timer@34000 {
compatible = "arm,sp804";
reg = <0x34000 0x1000>;
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 2d84226..1e04923 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -126,3 +126,37 @@
groups = "nand_grp";
};
};
+
+&qspi {
+ bspi-sel = <0>;
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p80";
+ reg = <0x0>;
+ spi-max-frequency = <12500000>;
+ m25p,fast-read;
+ spi-cpol;
+ spi-cpha;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x00000000 0x000a0000>;
+ };
+
+ partition@a0000 {
+ label = "env";
+ reg = <0x000a0000 0x00060000>;
+ };
+
+ partition@100000 {
+ label = "system";
+ reg = <0x00100000 0x00600000>;
+ };
+
+ partition@700000 {
+ label = "rootfs";
+ reg = <0x00700000 0x01900000>;
+ };
+ };
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-08-24 22:07 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-24 22:04 [PATCH v6, 0/8] Broadcom stb, and iProc SoC QSPI driver Kamal Dasu
2016-08-24 22:04 ` Kamal Dasu
2016-08-24 22:04 ` [PATCH v6, 1/8] spi: Broadcom BRCMSTB, NSP, NS2 SoC bindings Kamal Dasu
2016-08-24 22:04 ` Kamal Dasu
2016-09-14 17:16 ` Applied "spi: Broadcom BRCMSTB, NSP, NS2 SoC bindings" to the spi tree Mark Brown
2016-09-14 17:16 ` Mark Brown
2016-08-24 22:04 ` [PATCH v6, 2/8] spi: bcm-qspi: Add Broadcom MSPI driver Kamal Dasu
2016-08-24 22:04 ` Kamal Dasu
2016-08-24 22:04 ` [PATCH v6, 3/8] spi: brcmstb-qspi: Broadcom settop platform driver Kamal Dasu
2016-08-24 22:04 ` Kamal Dasu
2016-09-14 17:16 ` Applied "spi: brcmstb-qspi: Broadcom settop platform driver" to the spi tree Mark Brown
2016-09-14 17:16 ` Mark Brown
2016-08-24 22:04 ` [PATCH v6, 4/8] spi: bcm-qspi: Add BSPI spi-nor flash controller driver Kamal Dasu
2016-08-24 22:04 ` Kamal Dasu
2016-09-14 17:16 ` Applied "spi: bcm-qspi: Add BSPI spi-nor flash controller driver" to the spi tree Mark Brown
2016-09-14 17:16 ` Mark Brown
2016-08-24 22:04 ` [PATCH v6, 5/8] mtd: m25p80: Let m25p80_read() fallback to spi transfer Kamal Dasu
2016-08-24 22:04 ` Kamal Dasu
2016-10-10 8:04 ` Florian Fainelli
2016-10-10 8:04 ` Florian Fainelli
2016-10-10 8:29 ` Cyrille Pitchen
2016-10-10 8:29 ` Cyrille Pitchen
2016-10-13 21:15 ` Kamal Dasu
2016-10-13 21:15 ` Kamal Dasu
2016-10-14 13:17 ` Cyrille Pitchen
2016-10-14 13:17 ` Cyrille Pitchen
2016-11-29 1:32 ` Florian Fainelli
2016-11-29 1:32 ` Florian Fainelli
2016-11-29 14:06 ` Cyrille Pitchen
2016-11-29 14:06 ` Cyrille Pitchen
2016-12-01 15:45 ` Marek Vasut
2016-12-01 15:45 ` Marek Vasut
2017-01-20 19:35 ` Kamal Dasu
2017-01-20 19:35 ` Kamal Dasu
2016-08-24 22:04 ` Kamal Dasu [this message]
2016-08-24 22:04 ` [PATCH v6, 6/8] arm: dts: Add bcm-nsp and bcm958625k support Kamal Dasu
2016-09-14 20:33 ` Florian Fainelli
2016-09-14 20:33 ` Florian Fainelli
2016-08-24 22:04 ` [PATCH v6, 7/8] arm64: dts: Add ns2 SoC support Kamal Dasu
2016-08-24 22:04 ` Kamal Dasu
2016-09-14 20:34 ` Florian Fainelli
2016-09-14 20:34 ` Florian Fainelli
2016-08-24 22:04 ` [PATCH v6, 8/8] spi: iproc-qspi: Add Broadcom iProc SoCs support Kamal Dasu
2016-08-24 22:04 ` Kamal Dasu
2016-09-15 17:34 ` Florian Fainelli
2016-09-15 17:34 ` Florian Fainelli
2016-09-25 5:59 ` Applied "spi: iproc-qspi: Add Broadcom iProc SoCs support" to the spi tree Mark Brown
2016-09-25 5:59 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1472076269-4731-7-git-send-email-kdasu.kdev@gmail.com \
--to=kdasu.kdev@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=broonie@kernel.org \
--cc=computersforpeace@gmail.com \
--cc=f.fainelli@gmail.com \
--cc=jon.mason@broadcom.com \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-spi@vger.kernel.org \
--cc=vigneshr@ti.com \
--cc=yendapally.reddy@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.