Patch "usb: renesas_usbhs: Use dmac only if the pipe type is bulk" has been added to the 4.7-stable tree

Patch "usb: renesas_usbhs: Use dmac only if the pipe type is bulk" has been added to the 4.7-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    usb: renesas_usbhs: Use dmac only if the pipe type is bulk

to the 4.7-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     usb-renesas_usbhs-use-dmac-only-if-the-pipe-type-is-bulk.patch
and it can be found in the queue-4.7 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 700aa7ff8d2c2b9cc669c99375e2ccd06d3cd38d Mon Sep 17 00:00:00 2001
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Date: Mon, 8 Aug 2016 21:50:53 +0900
Subject: usb: renesas_usbhs: Use dmac only if the pipe type is bulk

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

commit 700aa7ff8d2c2b9cc669c99375e2ccd06d3cd38d upstream.

This patch fixes an issue that isochronous transfer's data is possible to
be lost as a workaround. Since this driver uses a workqueue to start
the dmac, the transfer is possible to be delayed when system load is high.

Fixes: 6e4b74e4690d ("usb: renesas: fix scheduling in atomic context bug")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/renesas_usbhs/fifo.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -871,7 +871,7 @@ static int usbhsf_dma_prepare_push(struc
 
 	/* use PIO if packet is less than pio_dma_border or pipe is DCP */
 	if ((len < usbhs_get_dparam(priv, pio_dma_border)) ||
-	    usbhs_pipe_is_dcp(pipe))
+	    usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC))
 		goto usbhsf_pio_prepare_push;
 
 	/* check data length if this driver don't use USB-DMAC */
@@ -976,7 +976,7 @@ static int usbhsf_dma_prepare_pop_with_u
 
 	/* use PIO if packet is less than pio_dma_border or pipe is DCP */
 	if ((pkt->length < usbhs_get_dparam(priv, pio_dma_border)) ||
-	    usbhs_pipe_is_dcp(pipe))
+	    usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC))
 		goto usbhsf_pio_prepare_pop;
 
 	fifo = usbhsf_get_dma_fifo(priv, pkt);


Patches currently in stable-queue which might be from yoshihiro.shimoda.uh@renesas.com are

queue-4.7/usb-renesas_usbhs-fix-receiving-data-corrupt-on-r-car-gen3-with-dmac.patch
queue-4.7/usb-renesas_usbhs-clear-the-brdysts-in-usbhsg_ep_enable.patch
queue-4.7/usb-renesas_usbhs-use-dmac-only-if-the-pipe-type-is-bulk.patch
queue-4.7/clk-renesas-r8a7795-fix-sd-clocks.patch