All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hoan Tran <hotran@apm.com>
To: Michael Turquette <mturquette@baylibre.com>,
	Rob Herring <robh+dt@kernel.org>,
	Stephen Boyd <sboyd@codeaurora.org>,
	Mark Rutland <mark.rutland@arm.com>
Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, lho@apm.com,
	Duc Dang <dhdang@apm.com>, Hoan Tran <hotran@apm.com>
Subject: [PATCH v3 1/3] Documentation: dtb: xgene: Add PMD clock binding
Date: Mon, 12 Sep 2016 11:23:23 -0700	[thread overview]
Message-ID: <1473704605-28126-2-git-send-email-hotran@apm.com> (raw)
In-Reply-To: <1473704605-28126-1-git-send-email-hotran@apm.com>

Add APM X-Gene clock binding documentation for PMD clock.

Signed-off-by: Hoan Tran <hotran@apm.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/clock/xgene.txt | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/xgene.txt b/Documentation/devicetree/bindings/clock/xgene.txt
index 82f9638..8233e77 100644
--- a/Documentation/devicetree/bindings/clock/xgene.txt
+++ b/Documentation/devicetree/bindings/clock/xgene.txt
@@ -8,6 +8,7 @@ Required properties:
 - compatible : shall be one of the following:
 	"apm,xgene-socpll-clock" - for a X-Gene SoC PLL clock
 	"apm,xgene-pcppll-clock" - for a X-Gene PCP PLL clock
+	"apm,xgene-pmd-clock" - for a X-Gene PMD clock
 	"apm,xgene-device-clock" - for a X-Gene device clock
 	"apm,xgene-socpll-v2-clock" - for a X-Gene SoC PLL v2 clock
 	"apm,xgene-pcppll-v2-clock" - for a X-Gene PCP PLL v2 clock
@@ -22,6 +23,15 @@ Required properties for SoC or PCP PLL clocks:
 Optional properties for PLL clocks:
 - clock-names : shall be the name of the PLL. If missing, use the device name.
 
+Required properties for PMD clocks:
+- reg : shall be the physical register address for the pmd clock.
+- clocks : shall be the input parent clock phandle for the clock.
+- #clock-cells : shall be set to 1.
+- clock-output-names : shall be the name of the clock referenced by derive
+  clock.
+Optional properties for PLL clocks:
+- clock-names : shall be the name of the clock. If missing, use the device name.
+
 Required properties for device clocks:
 - reg : shall be a list of address and length pairs describing the CSR
          reset and/or the divider. Either may be omitted, but at least
@@ -59,6 +69,14 @@ For example:
 		type = <0>;
 	};
 
+	pmd0clk: pmd0clk@7e200200 {
+		compatible = "apm,xgene-pmd-clock";
+		#clock-cells = <1>;
+		clocks = <&pmdpll 0>;
+		reg = <0x0 0x7e200200 0x0 0x10>;
+		clock-output-names = "pmd0clk";
+	};
+
 	socpll: socpll@17000120 {
 		compatible = "apm,xgene-socpll-clock";
 		#clock-cells = <1>;
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: hotran@apm.com (Hoan Tran)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/3] Documentation: dtb: xgene: Add PMD clock binding
Date: Mon, 12 Sep 2016 11:23:23 -0700	[thread overview]
Message-ID: <1473704605-28126-2-git-send-email-hotran@apm.com> (raw)
In-Reply-To: <1473704605-28126-1-git-send-email-hotran@apm.com>

Add APM X-Gene clock binding documentation for PMD clock.

Signed-off-by: Hoan Tran <hotran@apm.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/clock/xgene.txt | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/xgene.txt b/Documentation/devicetree/bindings/clock/xgene.txt
index 82f9638..8233e77 100644
--- a/Documentation/devicetree/bindings/clock/xgene.txt
+++ b/Documentation/devicetree/bindings/clock/xgene.txt
@@ -8,6 +8,7 @@ Required properties:
 - compatible : shall be one of the following:
 	"apm,xgene-socpll-clock" - for a X-Gene SoC PLL clock
 	"apm,xgene-pcppll-clock" - for a X-Gene PCP PLL clock
+	"apm,xgene-pmd-clock" - for a X-Gene PMD clock
 	"apm,xgene-device-clock" - for a X-Gene device clock
 	"apm,xgene-socpll-v2-clock" - for a X-Gene SoC PLL v2 clock
 	"apm,xgene-pcppll-v2-clock" - for a X-Gene PCP PLL v2 clock
@@ -22,6 +23,15 @@ Required properties for SoC or PCP PLL clocks:
 Optional properties for PLL clocks:
 - clock-names : shall be the name of the PLL. If missing, use the device name.
 
+Required properties for PMD clocks:
+- reg : shall be the physical register address for the pmd clock.
+- clocks : shall be the input parent clock phandle for the clock.
+- #clock-cells : shall be set to 1.
+- clock-output-names : shall be the name of the clock referenced by derive
+  clock.
+Optional properties for PLL clocks:
+- clock-names : shall be the name of the clock. If missing, use the device name.
+
 Required properties for device clocks:
 - reg : shall be a list of address and length pairs describing the CSR
          reset and/or the divider. Either may be omitted, but at least
@@ -59,6 +69,14 @@ For example:
 		type = <0>;
 	};
 
+	pmd0clk: pmd0clk at 7e200200 {
+		compatible = "apm,xgene-pmd-clock";
+		#clock-cells = <1>;
+		clocks = <&pmdpll 0>;
+		reg = <0x0 0x7e200200 0x0 0x10>;
+		clock-output-names = "pmd0clk";
+	};
+
 	socpll: socpll at 17000120 {
 		compatible = "apm,xgene-socpll-clock";
 		#clock-cells = <1>;
-- 
1.9.1

  reply	other threads:[~2016-09-12 18:23 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-12 18:23 [PATCH v3 0/3] clk: xgene: Add PMD clock support Hoan Tran
2016-09-12 18:23 ` Hoan Tran
2016-09-12 18:23 ` Hoan Tran
2016-09-12 18:23 ` Hoan Tran [this message]
2016-09-12 18:23   ` [PATCH v3 1/3] Documentation: dtb: xgene: Add PMD clock binding Hoan Tran
2016-09-14 20:55   ` Stephen Boyd
2016-09-14 20:55     ` Stephen Boyd
2016-09-14 20:55     ` Stephen Boyd
2016-09-12 18:23 ` [PATCH v3 2/3] clk: xgene: Add PMD clock Hoan Tran
2016-09-12 18:23   ` Hoan Tran
2016-09-12 18:23   ` Hoan Tran
2016-09-14 20:55   ` Stephen Boyd
2016-09-14 20:55     ` Stephen Boyd
2016-09-14 21:06     ` Hoan Tran
2016-09-14 21:06       ` Hoan Tran
2016-09-12 18:23 ` [PATCH v3 3/3] arm64: dts: xgene: Add DT node for APM X-Gene 2 CPU clocks Hoan Tran
2016-09-12 18:23   ` Hoan Tran
2016-09-14 20:55   ` Stephen Boyd
2016-09-14 20:55     ` Stephen Boyd
2016-09-14 21:05     ` Hoan Tran
2016-09-14 21:05       ` Hoan Tran
2016-09-14 21:05       ` Hoan Tran

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1473704605-28126-2-git-send-email-hotran@apm.com \
    --to=hotran@apm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dhdang@apm.com \
    --cc=lho@apm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.