From: Krzysztof Kozlowski <krzk@kernel.org>
To: Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Javier Martinez Canillas <javier@osg.samsung.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Marek Szyprowski <m.szyprowski@samsung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Geert Uytterhoeven <geert@linux-m68k.org>,
Alban Browaeys <alban.browaeys@gmail.com>,
Marc Zyngier <marc.zyngier@arm.com>
Subject: [PATCH 01/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4
Date: Fri, 16 Sep 2016 21:42:42 +0200 [thread overview]
Message-ID: <1474054971-16831-2-git-send-email-krzk@kernel.org> (raw)
In-Reply-To: <1474054971-16831-1-git-send-email-krzk@kernel.org>
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos4.dtsi | 94 ++++++++++++++++++++++--------------------
1 file changed, 50 insertions(+), 44 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 5f034eb5a5e2..e6f4da7f0038 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -21,6 +21,7 @@
#include <dt-bindings/clock/exynos4.h>
#include <dt-bindings/clock/exynos-audss-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos-syscon-restart.dtsi"
/ {
@@ -168,7 +169,7 @@
dsi_0: dsi@11C80000 {
compatible = "samsung,exynos4210-mipi-dsi";
reg = <0x11C80000 0x10000>;
- interrupts = <0 79 0>;
+ interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_lcd0>;
phys = <&mipi_phy 1>;
phy-names = "dsim";
@@ -191,7 +192,7 @@
fimc_0: fimc@11800000 {
compatible = "samsung,exynos4210-fimc";
reg = <0x11800000 0x1000>;
- interrupts = <0 84 0>;
+ interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>;
clock-names = "fimc", "sclk_fimc";
power-domains = <&pd_cam>;
@@ -203,7 +204,7 @@
fimc_1: fimc@11810000 {
compatible = "samsung,exynos4210-fimc";
reg = <0x11810000 0x1000>;
- interrupts = <0 85 0>;
+ interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>;
clock-names = "fimc", "sclk_fimc";
power-domains = <&pd_cam>;
@@ -215,7 +216,7 @@
fimc_2: fimc@11820000 {
compatible = "samsung,exynos4210-fimc";
reg = <0x11820000 0x1000>;
- interrupts = <0 86 0>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>;
clock-names = "fimc", "sclk_fimc";
power-domains = <&pd_cam>;
@@ -227,7 +228,7 @@
fimc_3: fimc@11830000 {
compatible = "samsung,exynos4210-fimc";
reg = <0x11830000 0x1000>;
- interrupts = <0 87 0>;
+ interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>;
clock-names = "fimc", "sclk_fimc";
power-domains = <&pd_cam>;
@@ -239,7 +240,7 @@
csis_0: csis@11880000 {
compatible = "samsung,exynos4210-csis";
reg = <0x11880000 0x4000>;
- interrupts = <0 78 0>;
+ interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>;
clock-names = "csis", "sclk_csis";
bus-width = <4>;
@@ -254,7 +255,7 @@
csis_1: csis@11890000 {
compatible = "samsung,exynos4210-csis";
reg = <0x11890000 0x4000>;
- interrupts = <0 80 0>;
+ interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>;
clock-names = "csis", "sclk_csis";
bus-width = <2>;
@@ -270,7 +271,7 @@
watchdog: watchdog@10060000 {
compatible = "samsung,s3c2410-wdt";
reg = <0x10060000 0x100>;
- interrupts = <0 43 0>;
+ interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_WDT>;
clock-names = "watchdog";
status = "disabled";
@@ -280,7 +281,8 @@
compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>;
interrupt-parent = <&pmu_system_controller>;
- interrupts = <0 44 0>, <0 45 0>;
+ interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>,
+ <0 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_RTC>;
clock-names = "rtc";
status = "disabled";
@@ -289,7 +291,7 @@
keypad: keypad@100A0000 {
compatible = "samsung,s5pv210-keypad";
reg = <0x100A0000 0x100>;
- interrupts = <0 109 0>;
+ interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_KEYIF>;
clock-names = "keypad";
status = "disabled";
@@ -298,7 +300,7 @@
sdhci_0: sdhci@12510000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12510000 0x100>;
- interrupts = <0 73 0>;
+ interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
@@ -307,7 +309,7 @@
sdhci_1: sdhci@12520000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12520000 0x100>;
- interrupts = <0 74 0>;
+ interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
@@ -316,7 +318,7 @@
sdhci_2: sdhci@12530000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12530000 0x100>;
- interrupts = <0 75 0>;
+ interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
@@ -325,7 +327,7 @@
sdhci_3: sdhci@12540000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12540000 0x100>;
- interrupts = <0 76 0>;
+ interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
@@ -344,7 +346,7 @@
hsotg: hsotg@12480000 {
compatible = "samsung,s3c6400-hsotg";
reg = <0x12480000 0x20000>;
- interrupts = <0 71 0>;
+ interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB_DEVICE>;
clock-names = "otg";
phys = <&exynos_usbphy 0>;
@@ -355,7 +357,7 @@
ehci: ehci@12580000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12580000 0x100>;
- interrupts = <0 70 0>;
+ interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB_HOST>;
clock-names = "usbhost";
status = "disabled";
@@ -381,7 +383,7 @@
ohci: ohci@12590000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12590000 0x100>;
- interrupts = <0 70 0>;
+ interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB_HOST>;
clock-names = "usbhost";
status = "disabled";
@@ -423,7 +425,7 @@
mfc: codec@13400000 {
compatible = "samsung,mfc-v5";
reg = <0x13400000 0x10000>;
- interrupts = <0 94 0>;
+ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_mfc>;
clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>;
clock-names = "mfc", "sclk_mfc";
@@ -434,7 +436,7 @@
serial_0: serial@13800000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
- interrupts = <0 52 0>;
+ interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
dmas = <&pdma0 15>, <&pdma0 16>;
@@ -445,7 +447,7 @@
serial_1: serial@13810000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13810000 0x100>;
- interrupts = <0 53 0>;
+ interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
dmas = <&pdma1 15>, <&pdma1 16>;
@@ -456,7 +458,7 @@
serial_2: serial@13820000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
- interrupts = <0 54 0>;
+ interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
dmas = <&pdma0 17>, <&pdma0 18>;
@@ -467,7 +469,7 @@
serial_3: serial@13830000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13830000 0x100>;
- interrupts = <0 55 0>;
+ interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
dmas = <&pdma1 17>, <&pdma1 18>;
@@ -480,7 +482,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13860000 0x100>;
- interrupts = <0 58 0>;
+ interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C0>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -493,7 +495,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13870000 0x100>;
- interrupts = <0 59 0>;
+ interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C1>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -506,7 +508,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13880000 0x100>;
- interrupts = <0 60 0>;
+ interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C2>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -519,7 +521,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13890000 0x100>;
- interrupts = <0 61 0>;
+ interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C3>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -532,7 +534,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138A0000 0x100>;
- interrupts = <0 62 0>;
+ interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C4>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -545,7 +547,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138B0000 0x100>;
- interrupts = <0 63 0>;
+ interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C5>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -558,7 +560,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138C0000 0x100>;
- interrupts = <0 64 0>;
+ interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C6>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -571,7 +573,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138D0000 0x100>;
- interrupts = <0 65 0>;
+ interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C7>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -584,7 +586,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-hdmiphy-i2c";
reg = <0x138E0000 0x100>;
- interrupts = <0 93 0>;
+ interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C_HDMI>;
clock-names = "i2c";
status = "disabled";
@@ -598,7 +600,7 @@
spi_0: spi@13920000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13920000 0x100>;
- interrupts = <0 66 0>;
+ interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 7>, <&pdma0 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -613,7 +615,7 @@
spi_1: spi@13930000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13930000 0x100>;
- interrupts = <0 67 0>;
+ interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma1 7>, <&pdma1 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -628,7 +630,7 @@
spi_2: spi@13940000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13940000 0x100>;
- interrupts = <0 68 0>;
+ interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 9>, <&pdma0 8>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -643,7 +645,11 @@
pwm: pwm@139D0000 {
compatible = "samsung,exynos4210-pwm";
reg = <0x139D0000 0x1000>;
- interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
+ interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>,
+ <0 38 IRQ_TYPE_LEVEL_HIGH>,
+ <0 39 IRQ_TYPE_LEVEL_HIGH>,
+ <0 40 IRQ_TYPE_LEVEL_HIGH>,
+ <0 41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PWM>;
clock-names = "timers";
#pwm-cells = <3>;
@@ -660,7 +666,7 @@
pdma0: pdma@12680000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
- interrupts = <0 35 0>;
+ interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -671,7 +677,7 @@
pdma1: pdma@12690000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
- interrupts = <0 36 0>;
+ interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -682,7 +688,7 @@
mdma1: mdma@12850000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12850000 0x1000>;
- interrupts = <0 34 0>;
+ interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MDMA>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -712,7 +718,7 @@
jpeg_codec: jpeg-codec@11840000 {
compatible = "samsung,exynos4210-jpeg";
reg = <0x11840000 0x1000>;
- interrupts = <0 88 0>;
+ interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_JPEG>;
clock-names = "jpeg";
power-domains = <&pd_cam>;
@@ -722,7 +728,7 @@
rotator: rotator@12810000 {
compatible = "samsung,exynos4210-rotator";
reg = <0x12810000 0x64>;
- interrupts = <0 83 0>;
+ interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_ROTATOR>;
clock-names = "rotator";
iommus = <&sysmmu_rotator>;
@@ -731,7 +737,7 @@
hdmi: hdmi@12D00000 {
compatible = "samsung,exynos4210-hdmi";
reg = <0x12D00000 0x70000>;
- interrupts = <0 92 0>;
+ interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy",
"mout_hdmi";
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
@@ -746,7 +752,7 @@
hdmicec: cec@100B0000 {
compatible = "samsung,s5p-cec";
reg = <0x100B0000 0x200>;
- interrupts = <0 114 0>;
+ interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_HDMI_CEC>;
clock-names = "hdmicec";
samsung,syscon-phandle = <&pmu_system_controller>;
@@ -757,7 +763,7 @@
mixer: mixer@12C10000 {
compatible = "samsung,exynos4210-mixer";
- interrupts = <0 91 0>;
+ interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
power-domains = <&pd_tv>;
iommus = <&sysmmu_tv>;
@@ -984,7 +990,7 @@
sss: sss@10830000 {
compatible = "samsung,exynos4210-secss";
reg = <0x10830000 0x300>;
- interrupts = <0 112 0>;
+ interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SSS>;
clock-names = "secss";
};
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: krzk@kernel.org (Krzysztof Kozlowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 01/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4
Date: Fri, 16 Sep 2016 21:42:42 +0200 [thread overview]
Message-ID: <1474054971-16831-2-git-send-email-krzk@kernel.org> (raw)
In-Reply-To: <1474054971-16831-1-git-send-email-krzk@kernel.org>
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos4.dtsi | 94 ++++++++++++++++++++++--------------------
1 file changed, 50 insertions(+), 44 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 5f034eb5a5e2..e6f4da7f0038 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -21,6 +21,7 @@
#include <dt-bindings/clock/exynos4.h>
#include <dt-bindings/clock/exynos-audss-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos-syscon-restart.dtsi"
/ {
@@ -168,7 +169,7 @@
dsi_0: dsi at 11C80000 {
compatible = "samsung,exynos4210-mipi-dsi";
reg = <0x11C80000 0x10000>;
- interrupts = <0 79 0>;
+ interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_lcd0>;
phys = <&mipi_phy 1>;
phy-names = "dsim";
@@ -191,7 +192,7 @@
fimc_0: fimc at 11800000 {
compatible = "samsung,exynos4210-fimc";
reg = <0x11800000 0x1000>;
- interrupts = <0 84 0>;
+ interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>;
clock-names = "fimc", "sclk_fimc";
power-domains = <&pd_cam>;
@@ -203,7 +204,7 @@
fimc_1: fimc at 11810000 {
compatible = "samsung,exynos4210-fimc";
reg = <0x11810000 0x1000>;
- interrupts = <0 85 0>;
+ interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>;
clock-names = "fimc", "sclk_fimc";
power-domains = <&pd_cam>;
@@ -215,7 +216,7 @@
fimc_2: fimc at 11820000 {
compatible = "samsung,exynos4210-fimc";
reg = <0x11820000 0x1000>;
- interrupts = <0 86 0>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>;
clock-names = "fimc", "sclk_fimc";
power-domains = <&pd_cam>;
@@ -227,7 +228,7 @@
fimc_3: fimc at 11830000 {
compatible = "samsung,exynos4210-fimc";
reg = <0x11830000 0x1000>;
- interrupts = <0 87 0>;
+ interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>;
clock-names = "fimc", "sclk_fimc";
power-domains = <&pd_cam>;
@@ -239,7 +240,7 @@
csis_0: csis at 11880000 {
compatible = "samsung,exynos4210-csis";
reg = <0x11880000 0x4000>;
- interrupts = <0 78 0>;
+ interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>;
clock-names = "csis", "sclk_csis";
bus-width = <4>;
@@ -254,7 +255,7 @@
csis_1: csis at 11890000 {
compatible = "samsung,exynos4210-csis";
reg = <0x11890000 0x4000>;
- interrupts = <0 80 0>;
+ interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>;
clock-names = "csis", "sclk_csis";
bus-width = <2>;
@@ -270,7 +271,7 @@
watchdog: watchdog at 10060000 {
compatible = "samsung,s3c2410-wdt";
reg = <0x10060000 0x100>;
- interrupts = <0 43 0>;
+ interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_WDT>;
clock-names = "watchdog";
status = "disabled";
@@ -280,7 +281,8 @@
compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>;
interrupt-parent = <&pmu_system_controller>;
- interrupts = <0 44 0>, <0 45 0>;
+ interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>,
+ <0 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_RTC>;
clock-names = "rtc";
status = "disabled";
@@ -289,7 +291,7 @@
keypad: keypad at 100A0000 {
compatible = "samsung,s5pv210-keypad";
reg = <0x100A0000 0x100>;
- interrupts = <0 109 0>;
+ interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_KEYIF>;
clock-names = "keypad";
status = "disabled";
@@ -298,7 +300,7 @@
sdhci_0: sdhci at 12510000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12510000 0x100>;
- interrupts = <0 73 0>;
+ interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
@@ -307,7 +309,7 @@
sdhci_1: sdhci at 12520000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12520000 0x100>;
- interrupts = <0 74 0>;
+ interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
@@ -316,7 +318,7 @@
sdhci_2: sdhci at 12530000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12530000 0x100>;
- interrupts = <0 75 0>;
+ interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
@@ -325,7 +327,7 @@
sdhci_3: sdhci at 12540000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12540000 0x100>;
- interrupts = <0 76 0>;
+ interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
@@ -344,7 +346,7 @@
hsotg: hsotg at 12480000 {
compatible = "samsung,s3c6400-hsotg";
reg = <0x12480000 0x20000>;
- interrupts = <0 71 0>;
+ interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB_DEVICE>;
clock-names = "otg";
phys = <&exynos_usbphy 0>;
@@ -355,7 +357,7 @@
ehci: ehci at 12580000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12580000 0x100>;
- interrupts = <0 70 0>;
+ interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB_HOST>;
clock-names = "usbhost";
status = "disabled";
@@ -381,7 +383,7 @@
ohci: ohci at 12590000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12590000 0x100>;
- interrupts = <0 70 0>;
+ interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB_HOST>;
clock-names = "usbhost";
status = "disabled";
@@ -423,7 +425,7 @@
mfc: codec at 13400000 {
compatible = "samsung,mfc-v5";
reg = <0x13400000 0x10000>;
- interrupts = <0 94 0>;
+ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_mfc>;
clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>;
clock-names = "mfc", "sclk_mfc";
@@ -434,7 +436,7 @@
serial_0: serial at 13800000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
- interrupts = <0 52 0>;
+ interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
dmas = <&pdma0 15>, <&pdma0 16>;
@@ -445,7 +447,7 @@
serial_1: serial at 13810000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13810000 0x100>;
- interrupts = <0 53 0>;
+ interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
dmas = <&pdma1 15>, <&pdma1 16>;
@@ -456,7 +458,7 @@
serial_2: serial at 13820000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
- interrupts = <0 54 0>;
+ interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
dmas = <&pdma0 17>, <&pdma0 18>;
@@ -467,7 +469,7 @@
serial_3: serial at 13830000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13830000 0x100>;
- interrupts = <0 55 0>;
+ interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
dmas = <&pdma1 17>, <&pdma1 18>;
@@ -480,7 +482,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13860000 0x100>;
- interrupts = <0 58 0>;
+ interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C0>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -493,7 +495,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13870000 0x100>;
- interrupts = <0 59 0>;
+ interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C1>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -506,7 +508,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13880000 0x100>;
- interrupts = <0 60 0>;
+ interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C2>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -519,7 +521,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13890000 0x100>;
- interrupts = <0 61 0>;
+ interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C3>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -532,7 +534,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138A0000 0x100>;
- interrupts = <0 62 0>;
+ interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C4>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -545,7 +547,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138B0000 0x100>;
- interrupts = <0 63 0>;
+ interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C5>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -558,7 +560,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138C0000 0x100>;
- interrupts = <0 64 0>;
+ interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C6>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -571,7 +573,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138D0000 0x100>;
- interrupts = <0 65 0>;
+ interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C7>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -584,7 +586,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-hdmiphy-i2c";
reg = <0x138E0000 0x100>;
- interrupts = <0 93 0>;
+ interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C_HDMI>;
clock-names = "i2c";
status = "disabled";
@@ -598,7 +600,7 @@
spi_0: spi at 13920000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13920000 0x100>;
- interrupts = <0 66 0>;
+ interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 7>, <&pdma0 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -613,7 +615,7 @@
spi_1: spi at 13930000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13930000 0x100>;
- interrupts = <0 67 0>;
+ interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma1 7>, <&pdma1 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -628,7 +630,7 @@
spi_2: spi at 13940000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13940000 0x100>;
- interrupts = <0 68 0>;
+ interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 9>, <&pdma0 8>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -643,7 +645,11 @@
pwm: pwm at 139D0000 {
compatible = "samsung,exynos4210-pwm";
reg = <0x139D0000 0x1000>;
- interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
+ interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>,
+ <0 38 IRQ_TYPE_LEVEL_HIGH>,
+ <0 39 IRQ_TYPE_LEVEL_HIGH>,
+ <0 40 IRQ_TYPE_LEVEL_HIGH>,
+ <0 41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PWM>;
clock-names = "timers";
#pwm-cells = <3>;
@@ -660,7 +666,7 @@
pdma0: pdma at 12680000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
- interrupts = <0 35 0>;
+ interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -671,7 +677,7 @@
pdma1: pdma at 12690000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
- interrupts = <0 36 0>;
+ interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -682,7 +688,7 @@
mdma1: mdma at 12850000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12850000 0x1000>;
- interrupts = <0 34 0>;
+ interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MDMA>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -712,7 +718,7 @@
jpeg_codec: jpeg-codec at 11840000 {
compatible = "samsung,exynos4210-jpeg";
reg = <0x11840000 0x1000>;
- interrupts = <0 88 0>;
+ interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_JPEG>;
clock-names = "jpeg";
power-domains = <&pd_cam>;
@@ -722,7 +728,7 @@
rotator: rotator at 12810000 {
compatible = "samsung,exynos4210-rotator";
reg = <0x12810000 0x64>;
- interrupts = <0 83 0>;
+ interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_ROTATOR>;
clock-names = "rotator";
iommus = <&sysmmu_rotator>;
@@ -731,7 +737,7 @@
hdmi: hdmi at 12D00000 {
compatible = "samsung,exynos4210-hdmi";
reg = <0x12D00000 0x70000>;
- interrupts = <0 92 0>;
+ interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy",
"mout_hdmi";
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
@@ -746,7 +752,7 @@
hdmicec: cec at 100B0000 {
compatible = "samsung,s5p-cec";
reg = <0x100B0000 0x200>;
- interrupts = <0 114 0>;
+ interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_HDMI_CEC>;
clock-names = "hdmicec";
samsung,syscon-phandle = <&pmu_system_controller>;
@@ -757,7 +763,7 @@
mixer: mixer at 12C10000 {
compatible = "samsung,exynos4210-mixer";
- interrupts = <0 91 0>;
+ interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
power-domains = <&pd_tv>;
iommus = <&sysmmu_tv>;
@@ -984,7 +990,7 @@
sss: sss at 10830000 {
compatible = "samsung,exynos4210-secss";
reg = <0x10830000 0x300>;
- interrupts = <0 112 0>;
+ interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SSS>;
clock-names = "secss";
};
--
2.7.4
next prev parent reply other threads:[~2016-09-16 19:42 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-16 19:42 [RFC PATCH 00/10] ARM: dts: exynos: Fix invalid GIC interrupt flags Krzysztof Kozlowski
2016-09-16 19:42 ` Krzysztof Kozlowski
2016-09-16 19:42 ` Krzysztof Kozlowski
2016-09-16 19:42 ` Krzysztof Kozlowski [this message]
2016-09-16 19:42 ` [PATCH 01/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4 Krzysztof Kozlowski
2016-09-16 19:42 ` [PATCH 02/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4210 Krzysztof Kozlowski
2016-09-16 19:42 ` Krzysztof Kozlowski
2016-09-16 19:42 ` [PATCH 03/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4x12 Krzysztof Kozlowski
2016-09-16 19:42 ` Krzysztof Kozlowski
2016-09-16 19:42 ` Krzysztof Kozlowski
2016-09-16 19:42 ` [PATCH 04/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4415 Krzysztof Kozlowski
2016-09-16 19:42 ` Krzysztof Kozlowski
2016-09-16 19:42 ` [PATCH 05/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos3250 Krzysztof Kozlowski
2016-09-16 19:42 ` Krzysztof Kozlowski
2016-09-16 19:42 ` [PATCH 08/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5410/exynos542x Krzysztof Kozlowski
2016-09-16 19:42 ` Krzysztof Kozlowski
2016-09-18 15:18 ` Javier Martinez Canillas
2016-09-18 15:18 ` Javier Martinez Canillas
[not found] ` <1474054971-16831-1-git-send-email-krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2016-09-16 19:42 ` [PATCH 06/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5 Krzysztof Kozlowski
2016-09-16 19:42 ` Krzysztof Kozlowski
2016-09-16 19:42 ` Krzysztof Kozlowski
2016-09-17 17:30 ` Alim Akhtar
2016-09-17 17:30 ` Alim Akhtar
2016-09-18 15:17 ` Javier Martinez Canillas
2016-09-18 15:17 ` Javier Martinez Canillas
2016-09-16 19:42 ` [PATCH 07/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5250 Krzysztof Kozlowski
2016-09-16 19:42 ` Krzysztof Kozlowski
2016-09-16 19:42 ` Krzysztof Kozlowski
2016-09-16 19:42 ` [PATCH 09/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5260 Krzysztof Kozlowski
2016-09-16 19:42 ` Krzysztof Kozlowski
2016-09-16 19:42 ` Krzysztof Kozlowski
2016-09-16 19:42 ` [PATCH 10/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5440 Krzysztof Kozlowski
2016-09-16 19:42 ` Krzysztof Kozlowski
2016-09-16 19:42 ` Krzysztof Kozlowski
2016-09-16 20:01 ` [RFT] arm64 dts: exynos: Fix invalid GIC interrupt flags in exynos7 Krzysztof Kozlowski
2016-09-16 20:01 ` Krzysztof Kozlowski
[not found] ` <1474056073-8071-1-git-send-email-krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2016-09-16 20:22 ` Krzysztof Kozlowski
2016-09-16 20:22 ` Krzysztof Kozlowski
2016-09-16 20:22 ` Krzysztof Kozlowski
2016-09-17 11:36 ` Alim Akhtar
2016-09-17 11:36 ` Alim Akhtar
[not found] ` <57DD2AA8.9060507-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-09-17 16:30 ` Krzysztof Kozlowski
2016-09-17 16:30 ` Krzysztof Kozlowski
2016-09-17 16:30 ` Krzysztof Kozlowski
2016-09-17 17:35 ` [RFC PATCH 00/10] ARM: dts: exynos: Fix invalid GIC interrupt flags Alim Akhtar
2016-09-17 17:35 ` Alim Akhtar
2016-09-17 17:55 ` Krzysztof Kozlowski
2016-09-17 17:55 ` Krzysztof Kozlowski
2016-09-18 9:34 ` Marc Zyngier
2016-09-18 9:34 ` Marc Zyngier
2016-09-18 14:30 ` Krzysztof Kozlowski
2016-09-18 14:30 ` Krzysztof Kozlowski
2016-09-18 8:49 ` Geert Uytterhoeven
2016-09-18 8:49 ` Geert Uytterhoeven
2016-11-03 21:21 ` Krzysztof Kozlowski
2016-11-03 21:21 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1474054971-16831-2-git-send-email-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=alban.browaeys@gmail.com \
--cc=b.zolnierkie@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=geert@linux-m68k.org \
--cc=javier@osg.samsung.com \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=marc.zyngier@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.