[PATCH v2 2/3] arm: dts: imx6qdl: Fix "ERROR: code indent should use tabs where possible"

All of lore.kernel.org
 help / color / mirror / Atom feed

From: jteki@openedev.com (Jagan Teki)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/3] arm: dts: imx6qdl: Fix "ERROR: code indent should use tabs where possible"
Date: Fri, 14 Oct 2016 15:09:29 +0530	[thread overview]
Message-ID: <1476437970-15800-3-git-send-email-jteki@openedev.com> (raw)
In-Reply-To: <1476437970-15800-1-git-send-email-jteki@openedev.com>

Fixed code indent tabs in respetcive imx6qdl dtsi files.

Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Jagan Teki <jteki@openedev.com>
---
Changes for v2:
	- none

 arch/arm/boot/dts/imx6qdl-gw52xx.dtsi        | 4 ++--
 arch/arm/boot/dts/imx6qdl-gw53xx.dtsi        | 4 ++--
 arch/arm/boot/dts/imx6qdl-gw54xx.dtsi        | 4 ++--
 arch/arm/boot/dts/imx6qdl-gw552x.dtsi        | 2 +-
 arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 6 +++---
 arch/arm/boot/dts/imx6qdl-sabreauto.dtsi     | 2 +-
 arch/arm/boot/dts/imx6qdl-sabresd.dtsi       | 4 ++--
 arch/arm/boot/dts/imx6qdl.dtsi               | 6 +++---
 8 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index a7100f9..54aca3a 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -153,9 +153,9 @@
 
 &clks {
 	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 };
 
 &ecspi3 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 8953eba..88e5cb3b 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -154,9 +154,9 @@
 
 &clks {
 	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 };
 
 &fec {
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 6ac41c7..1753ab7 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -144,9 +144,9 @@
 
 &clks {
 	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 };
 
 &fec {
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index 805e236..ee83161 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -291,7 +291,7 @@
 				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
 				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
 			>;
-                };
+		};
 
 		pinctrl_wdog: wdoggrp {
 			fsl,pins = <
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index e0280cac2..e9801a2 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -427,10 +427,10 @@
 };
 
 &usdhc3 {
-        pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_usdhc3
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3
 		     &pinctrl_usdhc3_cdwp>;
 	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-        status = "disabled";
+	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index e000e6f..8006467 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -283,7 +283,7 @@
 		VD-supply = <&reg_audio>;
 		VLS-supply = <&reg_audio>;
 		VLC-supply = <&reg_audio>;
-        };
+	};
 
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 8e9e0d9..55ef535 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -129,8 +129,8 @@
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
 		red {
-		        gpios = <&gpio1 2 0>;
-		        default-state = "on";
+			gpios = <&gpio1 2 0>;
+			default-state = "on";
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index b13b0b2..1bbd36f 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -204,9 +204,9 @@
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+					<0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
 				 <&clks IMX6QDL_CLK_LVDS1_GATE>,
 				 <&clks IMX6QDL_CLK_PCIE_REF_125M>;
-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)

From: Jagan Teki <jteki-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
To: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Jagan Teki <jteki-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
Subject: [PATCH v2 2/3] arm: dts: imx6qdl: Fix "ERROR: code indent should use tabs where possible"
Date: Fri, 14 Oct 2016 15:09:29 +0530	[thread overview]
Message-ID: <1476437970-15800-3-git-send-email-jteki@openedev.com> (raw)
In-Reply-To: <1476437970-15800-1-git-send-email-jteki-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>

Fixed code indent tabs in respetcive imx6qdl dtsi files.

Cc: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Jagan Teki <jteki-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
---
Changes for v2:
	- none

 arch/arm/boot/dts/imx6qdl-gw52xx.dtsi        | 4 ++--
 arch/arm/boot/dts/imx6qdl-gw53xx.dtsi        | 4 ++--
 arch/arm/boot/dts/imx6qdl-gw54xx.dtsi        | 4 ++--
 arch/arm/boot/dts/imx6qdl-gw552x.dtsi        | 2 +-
 arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 6 +++---
 arch/arm/boot/dts/imx6qdl-sabreauto.dtsi     | 2 +-
 arch/arm/boot/dts/imx6qdl-sabresd.dtsi       | 4 ++--
 arch/arm/boot/dts/imx6qdl.dtsi               | 6 +++---
 8 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index a7100f9..54aca3a 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -153,9 +153,9 @@
 
 &clks {
 	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 };
 
 &ecspi3 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 8953eba..88e5cb3b 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -154,9 +154,9 @@
 
 &clks {
 	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 };
 
 &fec {
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 6ac41c7..1753ab7 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -144,9 +144,9 @@
 
 &clks {
 	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 };
 
 &fec {
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index 805e236..ee83161 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -291,7 +291,7 @@
 				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
 				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
 			>;
-                };
+		};
 
 		pinctrl_wdog: wdoggrp {
 			fsl,pins = <
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index e0280cac2..e9801a2 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -427,10 +427,10 @@
 };
 
 &usdhc3 {
-        pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_usdhc3
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3
 		     &pinctrl_usdhc3_cdwp>;
 	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-        status = "disabled";
+	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index e000e6f..8006467 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -283,7 +283,7 @@
 		VD-supply = <&reg_audio>;
 		VLS-supply = <&reg_audio>;
 		VLC-supply = <&reg_audio>;
-        };
+	};
 
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 8e9e0d9..55ef535 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -129,8 +129,8 @@
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
 		red {
-		        gpios = <&gpio1 2 0>;
-		        default-state = "on";
+			gpios = <&gpio1 2 0>;
+			default-state = "on";
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index b13b0b2..1bbd36f 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -204,9 +204,9 @@
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+					<0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
 				 <&clks IMX6QDL_CLK_LVDS1_GATE>,
 				 <&clks IMX6QDL_CLK_PCIE_REF_125M>;
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)

From: Jagan Teki <jteki@openedev.com>
To: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, Jagan Teki <jteki@openedev.com>
Subject: [PATCH v2 2/3] arm: dts: imx6qdl: Fix "ERROR: code indent should use tabs where possible"
Date: Fri, 14 Oct 2016 15:09:29 +0530	[thread overview]
Message-ID: <1476437970-15800-3-git-send-email-jteki@openedev.com> (raw)
In-Reply-To: <1476437970-15800-1-git-send-email-jteki@openedev.com>

Fixed code indent tabs in respetcive imx6qdl dtsi files.

Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Jagan Teki <jteki@openedev.com>
---
Changes for v2:
	- none

 arch/arm/boot/dts/imx6qdl-gw52xx.dtsi        | 4 ++--
 arch/arm/boot/dts/imx6qdl-gw53xx.dtsi        | 4 ++--
 arch/arm/boot/dts/imx6qdl-gw54xx.dtsi        | 4 ++--
 arch/arm/boot/dts/imx6qdl-gw552x.dtsi        | 2 +-
 arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 6 +++---
 arch/arm/boot/dts/imx6qdl-sabreauto.dtsi     | 2 +-
 arch/arm/boot/dts/imx6qdl-sabresd.dtsi       | 4 ++--
 arch/arm/boot/dts/imx6qdl.dtsi               | 6 +++---
 8 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index a7100f9..54aca3a 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -153,9 +153,9 @@
 
 &clks {
 	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 };
 
 &ecspi3 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 8953eba..88e5cb3b 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -154,9 +154,9 @@
 
 &clks {
 	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 };
 
 &fec {
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 6ac41c7..1753ab7 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -144,9 +144,9 @@
 
 &clks {
 	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 };
 
 &fec {
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index 805e236..ee83161 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -291,7 +291,7 @@
 				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
 				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
 			>;
-                };
+		};
 
 		pinctrl_wdog: wdoggrp {
 			fsl,pins = <
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index e0280cac2..e9801a2 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -427,10 +427,10 @@
 };
 
 &usdhc3 {
-        pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_usdhc3
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3
 		     &pinctrl_usdhc3_cdwp>;
 	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-        status = "disabled";
+	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index e000e6f..8006467 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -283,7 +283,7 @@
 		VD-supply = <&reg_audio>;
 		VLS-supply = <&reg_audio>;
 		VLC-supply = <&reg_audio>;
-        };
+	};
 
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 8e9e0d9..55ef535 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -129,8 +129,8 @@
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
 		red {
-		        gpios = <&gpio1 2 0>;
-		        default-state = "on";
+			gpios = <&gpio1 2 0>;
+			default-state = "on";
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index b13b0b2..1bbd36f 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -204,9 +204,9 @@
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+					<0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
 				 <&clks IMX6QDL_CLK_LVDS1_GATE>,
 				 <&clks IMX6QDL_CLK_PCIE_REF_125M>;
-- 
2.7.4

next prev parent reply	other threads:[~2016-10-14  9:39 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-14  9:39 [PATCH v2 0/3] ARM: dts: imx6qdl cleanups Jagan Teki
2016-10-14  9:39 ` Jagan Teki
2016-10-14  9:39 ` Jagan Teki
2016-10-14  9:39 ` [PATCH v2 1/3] arm: dts: imx6qdl: Fix "WARNING: please, no space before tabs" Jagan Teki
2016-10-14  9:39   ` Jagan Teki
2016-10-14  9:39   ` Jagan Teki
2016-10-14  9:39 ` Jagan Teki [this message]
2016-10-14  9:39   ` [PATCH v2 2/3] arm: dts: imx6qdl: Fix "ERROR: code indent should use tabs where possible" Jagan Teki
2016-10-14  9:39   ` Jagan Teki
2016-10-14  9:39 ` [PATCH v2 3/3] arm: dts: imx6qdl-wandboard-revb: Fix "ERROR: trailing whitespace" Jagan Teki
2016-10-14  9:39   ` Jagan Teki
2016-10-14  9:39   ` Jagan Teki
2016-10-23 12:16 ` [PATCH v2 0/3] ARM: dts: imx6qdl cleanups Shawn Guo
2016-10-23 12:16   ` Shawn Guo
2016-10-23 12:16   ` Shawn Guo

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:a7100f9 dfblob:54aca3a dfblob:8953eba dfblob:88e5cb3
dfblob:6ac41c7 dfblob:1753ab7 dfblob:805e236 dfblob:ee83161
dfblob:e0280cac dfblob:e9801a2 dfblob:e000e6f dfblob:8006467
dfblob:8e9e0d9 dfblob:55ef535 dfblob:b13b0b2 dfblob:1bbd36f
dfblob:a7100f9 dfblob:54aca3a dfblob:8953eba dfblob:88e5cb3
dfblob:6ac41c7 dfblob:1753ab7 dfblob:805e236 dfblob:ee83161
dfblob:e0280cac dfblob:e9801a2 dfblob:e000e6f dfblob:8006467
dfblob:8e9e0d9 dfblob:55ef535 dfblob:b13b0b2 dfblob:1bbd36f
dfblob:a7100f9 dfblob:54aca3a dfblob:8953eba dfblob:88e5cb3
dfblob:6ac41c7 dfblob:1753ab7 dfblob:805e236 dfblob:ee83161
dfblob:e0280cac dfblob:e9801a2 dfblob:e000e6f dfblob:8006467
dfblob:8e9e0d9 dfblob:55ef535 dfblob:b13b0b2 dfblob:1bbd36f )
 OR (
bs:"[PATCH v2 2/3] arm: dts: imx6qdl: Fix "
bs:"ERROR: code indent should use tabs where possible" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1476437970-15800-3-git-send-email-jteki@openedev.com \
    --to=jteki@openedev.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.