All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mike Galbraith <umgwanakikbuti@gmail.com>
To: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>,
	LKML <linux-kernel@vger.kernel.org>,
	linux-rt-users <linux-rt-users@vger.kernel.org>,
	Steven Rostedt <rostedt@goodmis.org>
Subject: Re: [patch ]mm/zs_malloc: Fix bit spinlock replacement
Date: Mon, 17 Oct 2016 18:12:29 +0200	[thread overview]
Message-ID: <1476720749.30636.5.camel@gmail.com> (raw)
In-Reply-To: <20161017151526.c4snf4vlt6bytqrx@linutronix.de>

On Mon, 2016-10-17 at 17:15 +0200, Sebastian Andrzej Siewior wrote:
> On 2016-10-16 05:18:03 [+0200], Mike Galbraith wrote:
> > 
> > Do not alter HANDLE_SIZE, memory corruption ensues.  The handle is
> > a pointer, allocate space for the struct it points to and align it
> > ZS_ALIGN.  Also, when accessing the struct, mask HANDLE_PIN_BIT.
> 
> So this is to merged / folded into "mm/zsmalloc: Use get/put_cpu_light
> in zs_map_object()/zs_unmap_object()" which I re-did for v4.8?

Yeah.

> How was this tested?

Latest LTP.  You need latest, else it'll abort early.

> I have:
>    CONFIG_FRONTSWAP=y
>    # CONFIG_CMA is not set
>    CONFIG_ZSWAP=y
>    CONFIG_ZPOOL=y
>    CONFIG_ZBUD=m
>    CONFIG_Z3FOLD=m
>    CONFIG_ZSMALLOC=m
>    # CONFIG_PGTABLE_MAPPING is not set
>    CONFIG_ZSMALLOC_STAT=y
> 
> and
> 
>    # cat /sys/module/zswap/parameters/enabled
>    Y
>    cat /sys/module/zswap/parameters/zpool
>    zbud
>    # cat /sys/module/zswap/parameters/compressor 
>    lzo
>    # cat /sys/module/zswap/parameters/max_pool_percent 
>    20
> 
> and I do have 1GiB of swap on /dev/vdc. While I get swap to be used, I
> see no firework. Is there something wrong with my setup? I would assume
> so due to the lack of the fireworks on my side…

Run the ltp testcase, and you'll meet the below every time.  It'll
write 23 time, then explode.

[  117.527727] zram: Added device: zram0
[  132.913046] SFW2-INext-DROP-DEFLT IN=br0 OUT= MAC= SRC=fe80:0000:0000:0000:d63d:7eff:fefc:4f09 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=138 TC=0 HOPLIMIT=255 FLOWLBL=240223 PROTO=UDP SPT=5353 DPT=5353 LEN=98 
[  145.205893] loop: module loaded
[  145.388652] zram0: detected capacity change from 0 to 536870912
[  146.096042] BUG: unable to handle kernel paging request at ffff880389fa0000
[  146.096045] IP: [<ffffffff813aa516>] memcpy_erms+0x6/0x10
[  146.096046] PGD 2ded067 PUD 3f8f52063 PMD 38befc063 PTE 8000000389fa0161
[  146.096048] Oops: 0003 [#1] PREEMPT SMP
[  146.096050] Dumping ftrace buffer:
[  146.096053]    (ftrace buffer empty)
[  146.096064] Modules linked in: loop(E) zram(E) ebtable_filter(E) ebtables(E) fuse(E) nf_log_ipv6(E) xt_pkttype(E) xt_physdev(E) br_netfilter(E) nf_log_ipv4(E) nf_log_common(E) xt_LOG(E) xt_limit(E) af_packet(E) bridge(E) stp(E) llc(E) iscsi_ibft(E) iscsi_boot_sysfs(E) ip6t_REJECT(E) xt_tcpudp(E) nf_conntrack_ipv6(E) nf_defrag_ipv6(E) ip6table_raw(E) ipt_REJECT(E) iptable_raw(E) xt_CT(E) iptable_filter(E) ip6table_mangle(E) nf_conntrack_netbios_ns(E) nf_conntrack_broadcast(E) nf_conntrack_ipv4(E) nf_defrag_ipv4(E) ip_tables(E) xt_conntrack(E) nf_conntrack(E) ip6table_filter(E) ip6_tables(E) x_tables(E) nls_iso8859_1(E) intel_rapl(E) nls_cp437(E) intel_powerclamp(E) coretemp(E) vfat(E) fat(E) kvm_intel(E) kvm(E) pl2303(E) usbserial(E) dm_mod(E) snd_hda_codec_hdmi(E) snd_hda_codec_realtek(
 E) snd_hda_codec_generic(E)
[  146.096077]  snd_hda_intel(E) snd_hda_codec(E) irqbypass(E) sr_mod(E) cdrom(E) joydev(E) iTCO_wdt(E) crct10dif_pclmul(E) iTCO_vendor_support(E) crc32_pclmul(E) lpc_ich(E) mfd_core(E) ghash_clmulni_intel(E) aesni_intel(E) snd_hda_core(E) aes_x86_64(E) lrw(E) mei_me(E) mei(E) i2c_i801(E) gf128mul(E) i2c_smbus(E) pcspkr(E) shpchp(E) serio_raw(E) intel_smartconnect(E) tpm_infineon(E) battery(E) snd_hwdep(E) glue_helper(E) ablk_helper(E) snd_pcm(E) snd_timer(E) thermal(E) snd(E) nfsd(E) cryptd(E) fan(E) soundcore(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) sunrpc(E) efivarfs(E) hid_logitech_hidpp(E) ext4(E) crc16(E) jbd2(E) mbcache(E) hid_logitech_dj(E) sd_mod(E) uas(E) usb_storage(E) hid_generic(E) usbhid(E) crc32c_intel(E) nouveau(E) wmi(E) i2c_algo_bit(E) drm_kms_helper(E) syscopyarea(
 E) sysfillrect(E)
[  146.096081]  sysimgblt(E) ahci(E) ehci_pci(E) fb_sys_fops(E) libahci(E) xhci_pci(E) r8169(E) ehci_hcd(E) mii(E) ttm(E) xhci_hcd(E) libata(E) drm(E) usbcore(E) usb_common(E) fjes(E) video(E) button(E) sg(E) scsi_mod(E) autofs4(E)
[  146.096083] CPU: 1 PID: 4168 Comm: zram01 Tainted: G            E   4.8.1-rt1-virgin_debug #6
[  146.096083] Hardware name: MEDION MS-7848/MS-7848, BIOS M7848W08.20C 09/23/2013
[  146.096084] task: ffff88038e763200 task.stack: ffff8803f7e4c000
[  146.096085] RIP: 0010:[<ffffffff813aa516>]  [<ffffffff813aa516>] memcpy_erms+0x6/0x10
[  146.096085] RSP: 0018:ffff8803f7e4f820  EFLAGS: 00010286
[  146.096086] RAX: ffff880386d1a050 RBX: ffff880377d42b80 RCX: fffffffffcd7a000
[  146.096086] RDX: ffffffffffffffb0 RSI: ffff880400551030 RDI: ffff880389fa0000
[  146.096086] RBP: ffff8803f7e4f870 R08: ffff88038e763200 R09: 0000000000000000
[  146.096087] R10: 0000000000000004 R11: 0000000000000001 R12: ffff880375767000
[  146.096087] R13: ffffea000df02d00 R14: 0000000000000080 R15: ffffffffffffffb0
[  146.096088] FS:  00007f8313fd4700(0000) GS:ffff88041ec40000(0000) knlGS:0000000000000000
[  146.096088] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  146.096089] CR2: ffff880389fa0000 CR3: 000000037c627000 CR4: 00000000001406e0
[  146.096089] Stack:
[  146.096090]  ffffffff8124bb53 00000fd077d42b80 ffff88038e763200 000000000e1b4640
[  146.096091]  ffff8803fd2cb080 ffff8803d32c6400 0000000000000000 ffff880377d42b80
[  146.096092]  ffff88038e763200 ffff8803f7e4f940 ffff8803f7e4f8f8 ffffffffa0a23571
[  146.096092] Call Trace:
[  146.096095]  [<ffffffff8124bb53>] ? zs_unmap_object+0x153/0x2a0
[  146.096098]  [<ffffffffa0a23571>] zram_bvec_rw+0x3d1/0x850 [zram]
[  146.096100]  [<ffffffffa0a23c9d>] zram_make_request+0x19d/0x3b6 [zram]
[  146.096101]  [<ffffffff81366c18>] ? blk_queue_enter+0x38/0x2c0
[  146.096102]  [<ffffffff81366fae>] generic_make_request+0x10e/0x2e0
[  146.096103]  [<ffffffff813671ed>] submit_bio+0x6d/0x150
[  146.096105]  [<ffffffff8135d8e8>] ? bio_alloc_bioset+0x168/0x2a0
[  146.096107]  [<ffffffff8129508c>] submit_bh_wbc+0x15c/0x1a0
[  146.096109]  [<ffffffff812951fc>] __block_write_full_page+0x12c/0x3b0
[  146.096110]  [<ffffffff81297a90>] ? I_BDEV+0x20/0x20
[  146.096111]  [<ffffffff81297a90>] ? I_BDEV+0x20/0x20
[  146.096112]  [<ffffffff8129569f>] block_write_full_page+0xff/0x130
[  146.096113]  [<ffffffff812984c8>] blkdev_writepage+0x18/0x20
[  146.096116]  [<ffffffff811cea26>] __writepage+0x16/0x50
[  146.096117]  [<ffffffff811d055f>] write_cache_pages+0x2af/0x690
[  146.096118]  [<ffffffff811c8bc3>] ? free_pcppages_bulk+0x33/0x560
[  146.096119]  [<ffffffff811cea10>] ? compound_head+0x20/0x20
[  146.096121]  [<ffffffff811d0986>] generic_writepages+0x46/0x60
[  146.096122]  [<ffffffff8129847f>] blkdev_writepages+0x2f/0x40
[  146.096123]  [<ffffffff811d2541>] do_writepages+0x21/0x40
[  146.096124]  [<ffffffff811c374a>] __filemap_fdatawrite_range+0xaa/0xf0
[  146.096125]  [<ffffffff811c3800>] filemap_write_and_wait+0x40/0x80
[  146.096126]  [<ffffffff8129904f>] __sync_blockdev+0x1f/0x40
[  146.096126]  [<ffffffff812993a8>] __blkdev_put+0x78/0x3a0
[  146.096127]  [<ffffffff8129971e>] blkdev_put+0x4e/0x150
[  146.096128]  [<ffffffff81299848>] blkdev_close+0x28/0x30
[  146.096130]  [<ffffffff8125610b>] __fput+0xfb/0x230
[  146.096131]  [<ffffffff8125627e>] ____fput+0xe/0x10
[  146.096132]  [<ffffffff8109f393>] task_work_run+0x83/0xc0
[  146.096134]  [<ffffffff81072672>] exit_to_usermode_loop+0xb4/0xee
[  146.096135]  [<ffffffff81002afb>] syscall_return_slowpath+0xbb/0x130
[  146.096137]  [<ffffffff816de118>] entry_SYSCALL_64_fastpath+0xbb/0xbd
[  146.096146] Code: ff eb eb 90 90 eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 
[  146.096147] RIP  [<ffffffff813aa516>] memcpy_erms+0x6/0x10
[  146.096147]  RSP <ffff8803f7e4f820>
[  146.096148] CR2: ffff880389fa0000

WARNING: multiple messages have this Message-ID (diff)
From: Mike Galbraith <umgwanakikbuti@gmail.com>
To: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>,
	LKML <linux-kernel@vger.kernel.org>,
	linux-rt-users <linux-rt-users@vger.kernel.org>,
	Steven Rostedt <rostedt@goodmis.org>
Subject: Re: [patch ]mm/zs_malloc: Fix bit spinlock replacement
Date: Mon, 17 Oct 2016 18:12:29 +0200	[thread overview]
Message-ID: <1476720749.30636.5.camel@gmail.com> (raw)
In-Reply-To: <20161017151526.c4snf4vlt6bytqrx@linutronix.de>

On Mon, 2016-10-17 at 17:15 +0200, Sebastian Andrzej Siewior wrote:
> On 2016-10-16 05:18:03 [+0200], Mike Galbraith wrote:
> > 
> > Do not alter HANDLE_SIZE, memory corruption ensues.  The handle is
> > a pointer, allocate space for the struct it points to and align it
> > ZS_ALIGN.  Also, when accessing the struct, mask HANDLE_PIN_BIT.
> 
> So this is to merged / folded into "mm/zsmalloc: Use get/put_cpu_light
> in zs_map_object()/zs_unmap_object()" which I re-did for v4.8?

Yeah.

> How was this tested?

Latest LTP.  You need latest, else it'll abort early.

> I have:
>    CONFIG_FRONTSWAP=y
>    # CONFIG_CMA is not set
>    CONFIG_ZSWAP=y
>    CONFIG_ZPOOL=y
>    CONFIG_ZBUD=m
>    CONFIG_Z3FOLD=m
>    CONFIG_ZSMALLOC=m
>    # CONFIG_PGTABLE_MAPPING is not set
>    CONFIG_ZSMALLOC_STAT=y
> 
> and
> 
>    # cat /sys/module/zswap/parameters/enabled
>    Y
>    cat /sys/module/zswap/parameters/zpool
>    zbud
>    # cat /sys/module/zswap/parameters/compressor 
>    lzo
>    # cat /sys/module/zswap/parameters/max_pool_percent 
>    20
> 
> and I do have 1GiB of swap on /dev/vdc. While I get swap to be used, I
> see no firework. Is there something wrong with my setup? I would assume
> so due to the lack of the fireworks on my side…

Run the ltp testcase, and you'll meet the below every time.  It'll
write 23 time, then explode.

[  117.527727] zram: Added device: zram0
[  132.913046] SFW2-INext-DROP-DEFLT IN=br0 OUT= MAC= SRC=fe80:0000:0000:0000:d63d:7eff:fefc:4f09 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=138 TC=0 HOPLIMIT=255 FLOWLBL=240223 PROTO=UDP SPT=5353 DPT=5353 LEN=98 
[  145.205893] loop: module loaded
[  145.388652] zram0: detected capacity change from 0 to 536870912
[  146.096042] BUG: unable to handle kernel paging request at ffff880389fa0000
[  146.096045] IP: [<ffffffff813aa516>] memcpy_erms+0x6/0x10
[  146.096046] PGD 2ded067 PUD 3f8f52063 PMD 38befc063 PTE 8000000389fa0161
[  146.096048] Oops: 0003 [#1] PREEMPT SMP
[  146.096050] Dumping ftrace buffer:
[  146.096053]    (ftrace buffer empty)
[  146.096064] Modules linked in: loop(E) zram(E) ebtable_filter(E) ebtables(E) fuse(E) nf_log_ipv6(E) xt_pkttype(E) xt_physdev(E) br_netfilter(E) nf_log_ipv4(E) nf_log_common(E) xt_LOG(E) xt_limit(E) af_packet(E) bridge(E) stp(E) llc(E) iscsi_ibft(E) iscsi_boot_sysfs(E) ip6t_REJECT(E) xt_tcpudp(E) nf_conntrack_ipv6(E) nf_defrag_ipv6(E) ip6table_raw(E) ipt_REJECT(E) iptable_raw(E) xt_CT(E) iptable_filter(E) ip6table_mangle(E) nf_conntrack_netbios_ns(E) nf_conntrack_broadcast(E) nf_conntrack_ipv4(E) nf_defrag_ipv4(E) ip_tables(E) xt_conntrack(E) nf_conntrack(E) ip6table_filter(E) ip6_tables(E) x_tables(E) nls_iso8859_1(E) intel_rapl(E) nls_cp437(E) intel_powerclamp(E) coretemp(E) vfat(E) fat(E) kvm_intel(E) kvm(E) pl2303(E) usbserial(E) dm_mod(E) snd_hda_codec_hdmi(E) snd_hda_codec_realtek(E) snd_hda_codec_generic(E)
[  146.096077]  snd_hda_intel(E) snd_hda_codec(E) irqbypass(E) sr_mod(E) cdrom(E) joydev(E) iTCO_wdt(E) crct10dif_pclmul(E) iTCO_vendor_support(E) crc32_pclmul(E) lpc_ich(E) mfd_core(E) ghash_clmulni_intel(E) aesni_intel(E) snd_hda_core(E) aes_x86_64(E) lrw(E) mei_me(E) mei(E) i2c_i801(E) gf128mul(E) i2c_smbus(E) pcspkr(E) shpchp(E) serio_raw(E) intel_smartconnect(E) tpm_infineon(E) battery(E) snd_hwdep(E) glue_helper(E) ablk_helper(E) snd_pcm(E) snd_timer(E) thermal(E) snd(E) nfsd(E) cryptd(E) fan(E) soundcore(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) sunrpc(E) efivarfs(E) hid_logitech_hidpp(E) ext4(E) crc16(E) jbd2(E) mbcache(E) hid_logitech_dj(E) sd_mod(E) uas(E) usb_storage(E) hid_generic(E) usbhid(E) crc32c_intel(E) nouveau(E) wmi(E) i2c_algo_bit(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E)
[  146.096081]  sysimgblt(E) ahci(E) ehci_pci(E) fb_sys_fops(E) libahci(E) xhci_pci(E) r8169(E) ehci_hcd(E) mii(E) ttm(E) xhci_hcd(E) libata(E) drm(E) usbcore(E) usb_common(E) fjes(E) video(E) button(E) sg(E) scsi_mod(E) autofs4(E)
[  146.096083] CPU: 1 PID: 4168 Comm: zram01 Tainted: G            E   4.8.1-rt1-virgin_debug #6
[  146.096083] Hardware name: MEDION MS-7848/MS-7848, BIOS M7848W08.20C 09/23/2013
[  146.096084] task: ffff88038e763200 task.stack: ffff8803f7e4c000
[  146.096085] RIP: 0010:[<ffffffff813aa516>]  [<ffffffff813aa516>] memcpy_erms+0x6/0x10
[  146.096085] RSP: 0018:ffff8803f7e4f820  EFLAGS: 00010286
[  146.096086] RAX: ffff880386d1a050 RBX: ffff880377d42b80 RCX: fffffffffcd7a000
[  146.096086] RDX: ffffffffffffffb0 RSI: ffff880400551030 RDI: ffff880389fa0000
[  146.096086] RBP: ffff8803f7e4f870 R08: ffff88038e763200 R09: 0000000000000000
[  146.096087] R10: 0000000000000004 R11: 0000000000000001 R12: ffff880375767000
[  146.096087] R13: ffffea000df02d00 R14: 0000000000000080 R15: ffffffffffffffb0
[  146.096088] FS:  00007f8313fd4700(0000) GS:ffff88041ec40000(0000) knlGS:0000000000000000
[  146.096088] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  146.096089] CR2: ffff880389fa0000 CR3: 000000037c627000 CR4: 00000000001406e0
[  146.096089] Stack:
[  146.096090]  ffffffff8124bb53 00000fd077d42b80 ffff88038e763200 000000000e1b4640
[  146.096091]  ffff8803fd2cb080 ffff8803d32c6400 0000000000000000 ffff880377d42b80
[  146.096092]  ffff88038e763200 ffff8803f7e4f940 ffff8803f7e4f8f8 ffffffffa0a23571
[  146.096092] Call Trace:
[  146.096095]  [<ffffffff8124bb53>] ? zs_unmap_object+0x153/0x2a0
[  146.096098]  [<ffffffffa0a23571>] zram_bvec_rw+0x3d1/0x850 [zram]
[  146.096100]  [<ffffffffa0a23c9d>] zram_make_request+0x19d/0x3b6 [zram]
[  146.096101]  [<ffffffff81366c18>] ? blk_queue_enter+0x38/0x2c0
[  146.096102]  [<ffffffff81366fae>] generic_make_request+0x10e/0x2e0
[  146.096103]  [<ffffffff813671ed>] submit_bio+0x6d/0x150
[  146.096105]  [<ffffffff8135d8e8>] ? bio_alloc_bioset+0x168/0x2a0
[  146.096107]  [<ffffffff8129508c>] submit_bh_wbc+0x15c/0x1a0
[  146.096109]  [<ffffffff812951fc>] __block_write_full_page+0x12c/0x3b0
[  146.096110]  [<ffffffff81297a90>] ? I_BDEV+0x20/0x20
[  146.096111]  [<ffffffff81297a90>] ? I_BDEV+0x20/0x20
[  146.096112]  [<ffffffff8129569f>] block_write_full_page+0xff/0x130
[  146.096113]  [<ffffffff812984c8>] blkdev_writepage+0x18/0x20
[  146.096116]  [<ffffffff811cea26>] __writepage+0x16/0x50
[  146.096117]  [<ffffffff811d055f>] write_cache_pages+0x2af/0x690
[  146.096118]  [<ffffffff811c8bc3>] ? free_pcppages_bulk+0x33/0x560
[  146.096119]  [<ffffffff811cea10>] ? compound_head+0x20/0x20
[  146.096121]  [<ffffffff811d0986>] generic_writepages+0x46/0x60
[  146.096122]  [<ffffffff8129847f>] blkdev_writepages+0x2f/0x40
[  146.096123]  [<ffffffff811d2541>] do_writepages+0x21/0x40
[  146.096124]  [<ffffffff811c374a>] __filemap_fdatawrite_range+0xaa/0xf0
[  146.096125]  [<ffffffff811c3800>] filemap_write_and_wait+0x40/0x80
[  146.096126]  [<ffffffff8129904f>] __sync_blockdev+0x1f/0x40
[  146.096126]  [<ffffffff812993a8>] __blkdev_put+0x78/0x3a0
[  146.096127]  [<ffffffff8129971e>] blkdev_put+0x4e/0x150
[  146.096128]  [<ffffffff81299848>] blkdev_close+0x28/0x30
[  146.096130]  [<ffffffff8125610b>] __fput+0xfb/0x230
[  146.096131]  [<ffffffff8125627e>] ____fput+0xe/0x10
[  146.096132]  [<ffffffff8109f393>] task_work_run+0x83/0xc0
[  146.096134]  [<ffffffff81072672>] exit_to_usermode_loop+0xb4/0xee
[  146.096135]  [<ffffffff81002afb>] syscall_return_slowpath+0xbb/0x130
[  146.096137]  [<ffffffff816de118>] entry_SYSCALL_64_fastpath+0xbb/0xbd
[  146.096146] Code: ff eb eb 90 90 eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 
[  146.096147] RIP  [<ffffffff813aa516>] memcpy_erms+0x6/0x10
[  146.096147]  RSP <ffff8803f7e4f820>
[  146.096148] CR2: ffff880389fa0000

  reply	other threads:[~2016-10-17 16:12 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-06  8:52 [ANNOUNCE] 4.8-rt1 Sebastian Andrzej Siewior
2016-10-16  3:08 ` [patch] ftrace: Fix latency trace header alignment Mike Galbraith
2016-10-17 13:23   ` Sebastian Andrzej Siewior
2016-10-16  3:11 ` [patch] drivers,connector: Protect send_msg() with a local lock for RT Mike Galbraith
2016-10-17 14:16   ` Sebastian Andrzej Siewior
2016-10-16  3:14 ` [patch] drivers/zram: Don't disable preemption in zcomp_stream_get/put() Mike Galbraith
2016-10-17 14:24   ` Sebastian Andrzej Siewior
2016-10-17 16:19     ` Mike Galbraith
2016-10-17 16:29       ` Sebastian Andrzej Siewior
2016-10-17 17:18         ` Mike Galbraith
2016-10-17 17:46           ` Mike Galbraith
2016-10-19 15:56     ` [patch v2] " Mike Galbraith
2016-10-19 16:54       ` Sebastian Andrzej Siewior
2016-10-20  2:59         ` Mike Galbraith
2016-10-20 11:02       ` Sebastian Andrzej Siewior
2016-10-16  3:18 ` [patch ]mm/zs_malloc: Fix bit spinlock replacement Mike Galbraith
2016-10-17 15:15   ` Sebastian Andrzej Siewior
2016-10-17 16:12     ` Mike Galbraith [this message]
2016-10-17 16:12       ` Mike Galbraith
2016-10-19 15:50   ` [patch v2 ] mm/zs_malloc: " Mike Galbraith
2016-10-20 10:59     ` Sebastian Andrzej Siewior
2016-10-20  9:34 ` [rfc patch] hotplug: Call mmdrop_delayed() in sched_cpu_dying() if PREEMPT_RT_FULL Mike Galbraith
2016-10-20 11:21   ` Sebastian Andrzej Siewior

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1476720749.30636.5.camel@gmail.com \
    --to=umgwanakikbuti@gmail.com \
    --cc=bigeasy@linutronix.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rt-users@vger.kernel.org \
    --cc=rostedt@goodmis.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.