From: Subhash Jadavani <subhashj@codeaurora.org>
To: vinholikatti@gmail.com, jejb@linux.vnet.ibm.com,
martin.petersen@oracle.com
Cc: Venkat Gopalakrishnan <venkatg@codeaurora.org>,
Subhash Jadavani <subhashj@codeaurora.org>,
"open list:UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER"
<linux-scsi@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>
Subject: [PATCH v1 10/11] scsi: ufshcd: Fix race between clk scaling and ungate work
Date: Mon, 17 Oct 2016 17:10:53 -0700 [thread overview]
Message-ID: <1476749453-11446-1-git-send-email-subhashj@codeaurora.org> (raw)
From: Venkat Gopalakrishnan <venkatg@codeaurora.org>
The ungate work turns on the clock before it exits hibern8,
if the link was put in hibern8 during clock gating work.
There occurs a race condition when clock scaling work calls
ufshcd_hold() to make sure low power states cannot be entered,
but that returns by checking only whether the clocks are on.
This causes the clock scaling work to issue UIC commands when
the link is in hibern8 causing failures. Make sure we exit
hibern8 state before returning from ufshcd_hold().
Callstacks for race condition:
ufshcd_scale_gear
ufshcd_devfreq_scale
ufshcd_devfreq_target
update_devfreq
devfreq_monitor
process_one_work
worker_thread
kthread
ret_from_fork
ufshcd_uic_hibern8_exit
ufshcd_ungate_work
process_one_work
worker_thread
kthread
ret_from_fork
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
---
drivers/scsi/ufs/ufshcd.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index ea97fd0..7959793 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -675,6 +675,21 @@ int ufshcd_hold(struct ufs_hba *hba, bool async)
start:
switch (hba->clk_gating.state) {
case CLKS_ON:
+ /*
+ * Wait for the ungate work to complete if in progress.
+ * Though the clocks may be in ON state, the link could
+ * still be in hibner8 state if hibern8 is allowed
+ * during clock gating.
+ * Make sure we exit hibern8 state also in addition to
+ * clocks being ON.
+ */
+ if (ufshcd_can_hibern8_during_gating(hba) &&
+ ufshcd_is_link_hibern8(hba)) {
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+ flush_work(&hba->clk_gating.ungate_work);
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ goto start;
+ }
break;
case REQ_CLKS_OFF:
if (cancel_delayed_work(&hba->clk_gating.gate_work)) {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
WARNING: multiple messages have this Message-ID (diff)
From: Subhash Jadavani <subhashj@codeaurora.org>
To: vinholikatti@gmail.com, jejb@linux.vnet.ibm.com,
martin.petersen@oracle.com
Cc: Venkat Gopalakrishnan <venkatg@codeaurora.org>,
Subhash Jadavani <subhashj@codeaurora.org>,
linux-scsi@vger.kernel.org (open list:UNIVERSAL FLASH STORAGE
HOST CONTROLLER DRIVER), linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v1 10/11] scsi: ufshcd: Fix race between clk scaling and ungate work
Date: Mon, 17 Oct 2016 17:10:53 -0700 [thread overview]
Message-ID: <1476749453-11446-1-git-send-email-subhashj@codeaurora.org> (raw)
From: Venkat Gopalakrishnan <venkatg@codeaurora.org>
The ungate work turns on the clock before it exits hibern8,
if the link was put in hibern8 during clock gating work.
There occurs a race condition when clock scaling work calls
ufshcd_hold() to make sure low power states cannot be entered,
but that returns by checking only whether the clocks are on.
This causes the clock scaling work to issue UIC commands when
the link is in hibern8 causing failures. Make sure we exit
hibern8 state before returning from ufshcd_hold().
Callstacks for race condition:
ufshcd_scale_gear
ufshcd_devfreq_scale
ufshcd_devfreq_target
update_devfreq
devfreq_monitor
process_one_work
worker_thread
kthread
ret_from_fork
ufshcd_uic_hibern8_exit
ufshcd_ungate_work
process_one_work
worker_thread
kthread
ret_from_fork
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
---
drivers/scsi/ufs/ufshcd.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index ea97fd0..7959793 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -675,6 +675,21 @@ int ufshcd_hold(struct ufs_hba *hba, bool async)
start:
switch (hba->clk_gating.state) {
case CLKS_ON:
+ /*
+ * Wait for the ungate work to complete if in progress.
+ * Though the clocks may be in ON state, the link could
+ * still be in hibner8 state if hibern8 is allowed
+ * during clock gating.
+ * Make sure we exit hibern8 state also in addition to
+ * clocks being ON.
+ */
+ if (ufshcd_can_hibern8_during_gating(hba) &&
+ ufshcd_is_link_hibern8(hba)) {
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+ flush_work(&hba->clk_gating.ungate_work);
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ goto start;
+ }
break;
case REQ_CLKS_OFF:
if (cancel_delayed_work(&hba->clk_gating.gate_work)) {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next reply other threads:[~2016-10-18 0:10 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-18 0:10 Subhash Jadavani [this message]
2016-10-18 0:10 ` [PATCH v1 10/11] scsi: ufshcd: Fix race between clk scaling and ungate work Subhash Jadavani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1476749453-11446-1-git-send-email-subhashj@codeaurora.org \
--to=subhashj@codeaurora.org \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=venkatg@codeaurora.org \
--cc=vinholikatti@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.